Draw Something causes Apple TV to come out of standby

When starting the "Draw Something" app on my I-phone or I-pad, the start up "splash screen" seems to be interpreted by iOS as a video & causes Apple TV to come out of standby (assuming AirPlay had been left selected to Apple TV)
I have reported the issue to Zynga, who tell me an updated version of Draw Something addresses this issue, however the version currently available on the App Store (created Dec 28th 2012) appears to be the same (problematic) version I already have.

Sadly the suggestion you've made is where I've ended up. I'm grabbing a Belkin cable, like the one you mentioned, for $10 and calling it a day on the cable/SAT TV watching front. Because Last night, while watching the Blu-ray copy of Planet Earth, the sound from the Hi-Fi was solid and full. Even my super non-audiophile GF noticed the difference without question right away over the stock hollow LCD speakers' sound I've been annoyed by for sometime. Sound for most is harder to see a difference in when compared to the difference in Standard Source watching to HD.
Anyhow unless someone who knows about my LCD model can help with getting it's sound to the Hi-Fi like I have the PS3 or I move on to what I think is a safe beat, a 7.1 profile HD theater surround sound system, I'll be using the Hi-Fi for my Entertainment watching till in the near future. Otherwise your last suggestion and my conclusion, the analog cables will have to do for Cable/SAT tv watching.
Thanks for your input and time on my frivolous matter.
Message was edited by: Johnny Neat

Similar Messages

Is apple going to come out with a iso that lets ppl who have the iphone 3g to put up backgrounds its bs that i cant do it when ever i see something about the iphones even befor the 4g that all ways had backgrounds so what the **** is with that

is apple going to come out with a iso that lets ppl who have the iphone 3g to put up backgrounds its bs that i cant do it when ever i see something about the iphones even befor the 4g that all ways had backgrounds so what the **** is with that

iPhone 3G has received its last iOS update. If wallpapers behind the homescreen icons is such an important feature for you, you'll need a newer model iPhone.

Is Apple going to come out with an iPod touch that has built in Wi-fi ?

Apple should realy come out with an iPod Touch that has built in Wi-Fi. They iPod Touch could be just like a phone! I think everyone would upgrade to it.

Yeah , but you can only connect to Wi-Fi if you have a router , which in my case , I dont have one . I already have a phone , but it would be nice for it to have built in Wi-Fi so I could use the Internet or Facetime with people ANYWHERE , even if the place I was at DID NOT have a router / Wi-Fi connection . They iPad has built in Wi-Fi , so why not have the iPod Touch have built in Wi-Fi ?(:

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode?

What could be the possible reason for a deployed application to run slow after the target pc comes out of standby mode? PC running XP and using the USB to communicate with the DAQ and driver boards. Application generated with 2010.
Thanks

Hello,
Usually default property is checked
system property -> devices ->usb root -> power management -> allow system to switch off device
Hope this help
Regards
Tinnitus
CLAD / Labview 2011, Win Xp
Mission d'une semaine- à plusieurs mois laissez moi un MP...
RP et Midi-pyrénées .Km+++ si possibilité de télétravail
Kudos always accepted / Les petits clicks jaunes sont toujours appréciés
Don't forget to valid a good answer / pensez à valider une réponse correcte

Everytime my computer comes out of standby it no longer recognizes the GPIB-USB.

When the computer comes out of standby or hibernation I get a message saying that there is an unknown device on the USB port. Then I have to unplug the GPIB and plug it back in. Then the New Hardware Found Wizard starts up and I have to install the software again. Can this problem be fixed?

After a bit of searching through MSDN help, I found the SetThreadExecutionState command in the kernel32.lib. If you invoke SetThreadExecutionState(&H80000001) on entry to your application, you will prevent the OS from entering standby autonomously from an idle state. A user initiated standby, though, will override this. The application should issue a SetThreadExecutionState(&H80000000) on close to ensure for good housekeeping.
If you want the system to query the user before entering a user-initiated standby, then your application needs to intercept and respond to the WM_PowerBroadcst message fired by the PBT_APMQuerySuspend event. You will need to subclass your main application and respond to the event by returning a BROADCAST_QUERY_DENY from the wind
ow message loop. Go to this URL for the relevant code fragment in VB: http://www.freevbcode.com/ShowCode.asp?ID=2596
Larry E."

Lenovo t61 comes out of standby automatically after the lid is closed

Hi,
I have a t61 + wind 7 + 32 bit + ultimate edition. It was working fine till now and suddenly I have noticed its coming out of the standy mode suddenly. I close the lid, its going to standby mode i see the little semi circle on the top and everything is fine. Suddenly when it finds any known wifi signal or any thing, which I think I have noticed, its comes out of stand by ....I can tell that from the beep it makes and the light suddenly goes off. After sometime I notice that the battery dies, as its in normal mode even when the lid is closed and it consumes all of the battery. Please let me know what settings have to be changed to get rid of this F error. I am facing a lot of trouble as it consumes all of the battery when I open the lid even if its fully charged. I think it has to do with some settings. I have verified everything power manager, wireless adapater etc. Any gurus pls suggest.
thanks,
Manu

a couple things you can check...
open up Device Manager and see if Allow this device to wake the computer is enabled for your mouse and/or your wired ethernet device on the Power Management tab of their Properties sheets.
hth.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Cannot come out of standby w/ wireless keyboard mouse (usb)

For some reason I cannot get my mega 180 to respond to keyboard or mouse activity when in standby (wireless mouse/keyboard via usb). In ther device manager, the options to "allow this device to bring comp out of standby" is grayed out. Any ideas?
Something else I have noticed that might jog someone's brain: I have a touchscreen monitor that connects via a 9 pin adapter (it is made for a serial port) to a usb port. When I bring the computer out of standby by pressing the power button, I lose the touchscreen function, and can only get it back with a reboot.
tia

bios settings
you want s3 bios to turn the most devices off.
probable need to turn apm to disable,
and then enable some sort of wakeup ...kbc (keyboard comand,...wake on usb or something like that.
that worked for my msi board..yours should be similar

Computer restarts when I make it come out of standby

Hi everyone. I just installed arch linux a few days ago and everything is working fine except for this problem. I cannot figure it out at all. Basically I suspend the computer using pm-suspend and the computer goes to sleep. When I press the keyboard or I press the power button the computer just restarts. I've installed windows and linux on this computer previously and I have never had this problem. The computer would just resume from standby normally.

Thanks. I am using awesome wm and here is my uname.
Linux timmy 2.6.35-ARCH #1 SMP PREEMPT Tue Sep 21 11:00:23 UTC 2010 i686 Intel(R) Atom(TM) CPU D510 @ 1.66GHz GenuineIntel GNU/Linux
I don't have a video card; it just uses the built-in one and the video driver version is xf86-video-intel 2.12.0-1.
Last edited by kimmel (2010-10-01 19:10:04)

How to stop mouse bringing pc out of standby (K8N-neo 2) CORRECTION ADDED

I have a problem with a pc running XP-pro on an MSI-k8n-neo motherboard, when i put the pc into standby (S3 str) if you move the mouse while its in this state the pc comes out of standby. This is something i dont want it to do, the mouse by the way is a wireless Tevion laser mouse connected via ps2. I have run the bios set-up and disabled the mouse from bringing the pc out of standby. I have also gone to (from control panel) Mouse / hardware / properties / power management and unchecked " Allow this device to bring computer out of standby ", but the mouse still brings pc out of standby. Anyone know how to stop this happening.
Some more info, the pc connects to the internet via a wireless link which i believe operates at the same frequency as cordless mice. There could be some interference being generated between the two,but i dont see how the mouse can start the pc if i have disabled it from doing so. As i have said the mouse has a ps2 connection which connects to its docking station, the docking station does not have its own dedicated power supply and draws power from the ps2 connection for running and recharging the mouse, even when the pc has been shut down.

I tried moving the mouse base station further away from the wireless antenna but it made no dfference, In saying that though the cable on the mouse base station is very short. Another way of putting the pc in sleep mode was suggested to me and that was to use hibernate instead of standby. I tried it and it works fine. So im gonna stick with it, i would liked to have gotten to the bottom of the mouse problem though. If i do i will post back here.

No USB Functionality After Coming Out of Standby Mode - Windows XP SP2

I currently use my MacBook with Boot Camp to run Windows XP SP2 (as the default boot OS). I have enabled standby so that I can save battery power. However, whenever I come out of standby, it seems as if the USB ports no longer work. Sometimes I'll have a USB mouse plugged in and it will no longer work after coming out of standby (in the past, it would take like 10 minutes to work, but now it seems to not work at all). I have tried unplugging it and plugging it into a different USB port with no success. I have even tried another USB device (a digital photo frame product) and it doesn't detect either (although it seems to provide power via the USB port because the digital photo frame shows the "connecting..." screen). Any help regarding this is greatly appreciated, since its so frustrating to have to reboot to gain access to my USB ports. Thanks!

Same with BootCamp v2.1 and in XP SP3. More Apple software bugs it seems (seem to be rampant across all their gadgets - e.g. iPod Touch 2G v2.1.1 WiFi WPA/WPA2 failures, etc.).
Frustrated, thinking about third party Bluetooth keyboard mouse (e.g. Logitech DiNovo Edge works great on my Mac mini with it's own mini USB bluetooth receiver, just tap a key to resume from standby like you're supposed to be able to!) -- or a traditional Logitech wireless.
MIS (kscorp)

Safari hangs when coming out of standby

I have a 15" early 2011 MacBook Pro running 10.6.7.
When I open my MacBook Pro (ie, when it comes out of standby), and go into Safari (which is already open), Safari hangs for at least 10 seconds. This happens about 95% of the time. It makes no difference if Safari is reset - the problem still occurs.
Similarly, but less frequently, the system hangs for about 10 seconds at the password screen when opening the laptop lid - approximately 20% of the time.
Clearly this is not an ideal situation!
Any ideas or suggestions would be greatly appreciated.
Many thanks,
J

Might be a third party Safari plugin causing the lag time.
From your Safari menu bar click Safari / Preferences then select the Security tab. Deselect: Enable Plugins.
Quit then relaunch Safari to test.
Since the Mac hangs at the login screen, check for login items.
Open System Preferences/Accounts then select the Login Items tab. Delete any files or apps you have listed there. And go to /Library/Startup Items. Move any files in the Startup Items folder to the Trash.
If you haven't checked the startup disk lately, try that.
Launch Disk Utility. /Applications/Utillities.
Select MacintoshHD in the panel on the left then select the First Aid tab.
Click: Verify Disk (not Verify Disk Permissions). If the startup disk needs repairing, follow the instructions for Using Disk Utility to verify or repair disks

8100 coming out of standby

I can put my 8100 into standby using the mute button. However, it comes out of standby without my using the mute button again. I've tested it by setting it on a desk so I know the mute button is not being pressed accidentally. Is there a time out of some kind on standby?
Thank you
Grant
Grant Wilkinson
Ottawa ON Canada

Hi alan,
At this point I think you/they should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, Reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
The 5 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
At least if it doesn't fix it, it'll eliminate a few questions.
Also, One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
Reboot, test again.

No sound after coming out of standby? Sound Blaster X-Fi Titanium Fatality (Fatal1ty)

Hi all,
It seems like every time computer comes out of standby I can't get any sound.
Trick that I use is Control Panel > Sound and then right click on Creative SB X-Fi and then test. after couple of times sometimes even after first click I get sound back.
Any suggestions?
TIA

Try new
Support installing tweaks.ini
headphone.Registration microphone.Registration in main inf.
New Headphone and Micorphone inf tweaks. New shortcut finder for common folder.
Fix SSD start up missing sound issue. Fully works now Enjoy.
http://dl.technewshw.com/driver/PAX/...k%20Edition.7z
Test final set

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop?

Something keeps trying to download on my mac and I don't know what it is. It is not in the apple store and just comes out nowhere and request for my password to download something and I don't know what it is. How to make this stop? It pops up every single day.

Erica,
     I can, with 99.99% certainty, tell you that you are absolutely right in not wanting to download or install this "Helper," whatever it is (but we can be equally certain it would not "help" anything).
     I cannot comment as to Oglethorpe's recommendation of 'adwaremedic'; I am unfamiliar with it. His links to the Apple discussion and support pages warrant your time and attention.
     It might be really simple -- Trying looking in your Downloads folder, trash anything that you don't know with certainty is something you want to keep, and then Secure Empty your Trash. Then remove the AdBlock extension, LastPass, and Web of Trust extensions to Safari and re-boot. If the issue goes away, still be extraordinarily careful in the future.
     Unfortunately, it's probably not going to be that simple to get rid of, in which case I'd then try the line by line editing in HT203987.
     I have no further suggestions (other than a complete wipe and re-install...but that's a pain because trying to restore from Time Machine would simply ... restore the Mal).
   For the rest of us, please post when you find a solution.
     Best.
     BPW
(Also, try to edit your second post -- black out your last name on the screenshot and re-post it for others)

Still dont wanna use my credit card,always if i want buy something on apple store ,there is a your payment method was declined,dont know why cause my credit card is working...

still dont wanna use my credit card,always if i want buy something on apple store ,there is a your payment method was declined,dont know why cause my credit card is working...

Find out here:
iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

Draw Something causes Apple TV to come out of standby

Similar Messages

Maybe you are looking for