Draw the Borders on the Table and Loop Contents.

Hello Everyone,
I have a Table and a Loop in the Smartform. I am Printing the Details on the Tabular Format of 5 coulums and a few rows in the table and a loop.
Now, I want to Draw the table lines for these tables and the Loop.
The Option of Boxes and Lines are provided but I can not use them.
Can any one please Suggest me how to use the Lines and the Boxes on the table and the Loop.
Regards,
Deepak.

Hello,
I tried the way you told me to but then every time I single click or even double click. It just gives me the same error that
"The Boxes and shadowing are not allowed in the Table."
I am doing this in the Output options tab of the Cell which has been created under the Row line of the table.
Please suggest me any other possible work around or the solution. Many thanks for your Advice so far.
Regards,
Deepak.

Similar Messages

About the Names of std Tables and their list of contents

Hi every body ,
can u pls give me Source of finding the list of standard tables and their contents
such that i can refer to those tables to determine what should be the Mandatory data elements .
i need just 2 determine what is required and what not ?
Awaiting for a brighter and good response .....
reply to [email protected]

Hi,
Search for SAP Tables in www.sap-img.com. You will find a Zip file, this has most of the tables used in most of the modules. Check those tables and find which are all the primary fields.
Regards
Subramanian

How to manage the space between a table and its title?

Have tables where titles are very close to the main text and need a couple of points to separate these elements. How to reshape this space?
1. Titles were separated by a return that is not visible... (any code is revealed by ID)
2. When a Return is inserted after the title, nothing happens aparently, but this return is now visible and could be used as a «paragraph space after» value:
3. A solution could be Grep to catch the end of paragraph assigned to titles to insert a return;
but Grep only catches the right border of the table (the yellow mark shows the big blinking cursor);
Grep cannot see the end of paragraph in the tables's title.
It another method?
Basically, how to modify the space between a table and ists title

I think you and Bob are not in synch here.
Bob suggested that you could use paragraph spacing, but for that to work you do need to use separate paragraphs for the title and table, which you don't seem to be doing. Using GREP to find the end of the paragraph only works if there IS and end to the paragraph. As far as I know there is now meta-character to use in Find/Change that would allow you to find a table and insert a paragraph break ahead of it, but I bet it could be scripted.
I'm not quite sure what you were trying to find in the GREP you posted. Did you actually have a paragraph return inserted already after the title? In that case you only need to redefine the style for that paragraph to add the space (or redefine the style for the paragraph that holds the table itself). You don't need the GREP. But the reason it does nothing is that you've found a location -- the end of the paragraph, but haven't found any actual text to modify. To do anything you would need to use something like .$
But back to NOT having a separate paragraph... If you put the cursor in any table cell and go to Table Options > Table Setup tab you'll see fields to set space before and after the table that should do what you want. That was the second part of what he posted.

In iTunes on my windows 7 PC, the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available. The borders of the window cannot be draged larger. As a result, I can not uncheck or check some box's.

In iTunes on my windows 7 PC, in the Edit/Preferences dropdown window,some of the tab windows are not large enough to see all options that are available. The borders of the window cannot be draged larger. As a result, I can not uncheck or check some box's on several of the preferences pages. The Apple people at the store did not help. I have lownloaded the latest version of iTunes and this is still an issue. HELP.

Is there really nobody else with this problem? Really?

BB Desktop Software 610_b038 only shows the borders of the windows

Hi after upgrading to the last version of de Desktop Software, the Windows doesn't seem to appear. I only see the main frames of the windows, but everything inside it's transparent. the software seems to work, because it's detecting the device, connecting, pop up some windows for some confirmation, but I don't see anything at all but the borders of the Desktop.
Any ideas what can be doing this ?

Yes I actually only set up the back up for one user and that's the one I cannot see the status of the back up or further documentation. I accidently logged on as the second user and that's how I saw the screen looked different showing status etc. In fact for the second user I didn't select ENABLE back up, but that's the user it appears to be running correctl on Screenshot 1 is the user I set up the back up for and screenshot 2 is the user I didn't. Data and status of a runing back up show on user 2 but not user 1.

Darker colors on the borders of the screen on a W701

Hello,
I have a new W701 2500 with the RGB LED screen, and the colors appear darker in the borders of the screen, most noticeably in the top left border. I see a solid color as a gradient, and I have noticed it just by browsing a web page, not looking for it specifically. I'm sitting centered in front of the screen. Although I have a w701, I'm no graphics expert, but I enjoy the superb screen and I find this gradient annoying. Is there anything I can do?
Thank you for your help.
Regards,
Fernando

Hi,
hazart wrote:
Can you post a photo of your screen?
Sorry for the delay, I've been busy at work.
Here is a photo taken with my cell phone of an orange background:
orange bakground
In the photo it is much worse than in real life, my phone's camera is not very good.
To illustrate the issue better, I have created this test image:
test
In this image, the left rectangle in the center and the one in the upper left corner are the same color, while the rectangle in the right has a darker/redder color. If I place the image in the lower-right part of the screen, the colors appear as I described (there are small differences due to the camera, when I look at the screen I see o difference between the center-left and top-left rectangles):
lower right
But if I place the image in the upper left part of the screen, the upper left rectangle is much more similar to the center rectangle in the right, which is redder:
upper left
I have moved around red, green and blue images, and I have noticed a similar effect, subjectively stronger in red, less in green, and nearly none at blue. I can see how the color changes as I move the rectancle to the top. Initially I thought that the effect was higher on the borders, but now I think it is most noticeable on the top of the screen, specially on the top-left.
Thank you for your help.
Regards,
Fernando

Insert a table and add content

This question was posted in response to the following article: http://help.adobe.com/en_US/dreamweaver/cs/using/WScbb6b82af5544594822510a94ae8d65-7d9fa.h tml

hi nancy thanks for your response, i will definitely try this tactic for next time, but for now i have all these pages that are straight up images that i wish to add a form to, and i dont really want to start all over. is there a simple way of doing this with out my slices all moving around or some other way to pop a form on top of an image that wont allow that image to move around cindy
Date: Wed, 28 Mar 2012 14:13:29 -0600
From: [email protected]
To: [email protected]
Subject: Insert a table and add content
    Re: Insert a table and add content
    created by Nancy O. in Dreamweaver - View the full discussion
Graphics apps generate rigid, mostly unstable HTML code. OK for quick comps but not ideal for real websites. For best results, use graphic apps for images only. Use DW to create your web pages. Strat here: Taking a Fireworks design comp to a CSS Layout in DW Part 1 - Initial Designhttp://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt1.html Part 2 - Markup preparationhttp://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt2.html Part 3 - Layout and CSShttp://www.adobe.com/devnet/dreamweaver/articles/dw_fw_css_pt3.html Nancy O.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4298249#4298249
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4298249#4298249. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How do you remove the borders from a table item

In OAF I have a set of data stored in a table that I must display. However, I must make it look like it is not in a table. I can't use a tablelayout because it is a set of records and records are constantly being added. How do I remove the borders and the pagination from the table?

I think you can't do anything about this.
Change you design as per Browser Look and Feel standards.
http://www.oracle.com/technology/tech/blaf/index.html
--Prasanna

Split the records of interanl table and upload it to fields

Hi All,
I have a internal table filled with records in following format.
XXXXXXXX~~Export the invoice
2~19980501~19980531
// The first invoice:
0~00130698114000010004119980512059611000276233.350.1711076.66????321000789010005???????????????????130601000000000??????????18? 3352051????532611-3357211???~~~
0~????????176233.350.1711076.6676233.350~1510
// The second invoice:
0~00130698114000010007219980512059611000440482.000.175882.00????110108078901007?????????61? 68744479?????????????462088-07?????130601000000000??????????18? 3352051????532611-3357211???????????~~~
0~????????139780.000.175780.0039780.000~1510
0~????3.5"10702.000.17102.0070.20~1510
I want to sort this out field by field and fill it to the respective fields.
If i try to do so with work area
read table itgt_frmgto into waitgt_frmgto index 4.
i have a out put of one line that is 4th.Butbbecause these are random records,i cannot count on lines .So i have to go by fields.
Could anybody tell me how to do this with multiple lines coming in without using
index concept.
Thank you,
Priya

hi,
loop the table and inside the loop split each line into other variables if the line has a fix structure or split into an another itab if not.
SPLIT <line> AT '~~' INTO <f1> ... <fn>.
or
SPLIT <line> AT '~~' INTO <itab>.
you might want to take a look at the syntax of SPLI statement.
br

How to get the data from one table and insert into another table

Hi,
We have requirement to build OA page with the data needs to be populated from one table and on save data into another table.
For the above requirement what the best way to implement in OAF.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
Thanks

You can achieve this in many different ways, one is
1. Create another VO based on the EO which is based on the dest table.
2. At save, copy the contents of the source VO into the dest VO (see copy routine in dev guide).
3. commiting the transaction will push the data into the dest table on which the dest VO is based.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
if by table you mean a DB table, then no, you can have a VO based on multiple EOs which will do DMLs accordingly.Thanks
Tapash

Two iterators browsing the same data (a table and a tree) problem

I have an ADF UIX application with a navigation tree and a central page with a table of the records of a Works view object.
There is a hierarchical relationship of Works ->Subworks-> Tasks which is shown in the tree. In the central part of the page, there is a table of Works.
I want
1) the tree to show all the data, but only about 10 works at a time (using small arrows for scrolling up and down)
2) the table to show only 10 or 20 records each time. Not the same with the tree.
3) Both clicking on a link on the tree and selecting a work on the table will open the appropriate page.
4) Opening the children of a node in the tree and clicking on the links being able to send me directly in the correct subwork or task page EVEN if I haven't visited the parent node (work) first.
I cannot seem to be able to succed in the "even if" part of 4 and I can succeed in only any 2 of the first three.
If the tree iterator and table iterator point to the same view object (work1 for example), it is impossible to show a different set of works in the tree and the table
If I use different view objects, then, if the tree part is working, the table selection doesn't work. I imagined that's a problem with "SetCurrentRowWithIndex" and I tried to set up correctly a "SetCurrentRowWithKey" event, but I didn't know how to write the handler. (I use JHS event handling, by the way)
I suppose the following has errors:
<event name="setCurrentRowWithKey" source="GetaeergView1">
<set target="${bindings.GetaeergView1Iterator}" property="currentRowKeyInRange" value="${ui:tableSelectedKey(uix, 'GetaeergView1')}"/>
</event>
Any suggestions?

Noone has tried this again?

After reopening dreamweaver files, the table and its contents are not shown in design view

I got a problem with deisgn view which has stucked me for the whole week. I've designed a webpage with dreamweaver CS4. After reopening this webpage, I got problem to see the tables and images inserted in dreamweaver (the sliced images from fireworks works well). Somehow this problem only existed in design view, but NOT is browswer view/ live view. I thought it is the setting problem, but I tried to reopen the webpage I designed earlier... got no problem in either design or live view. I also tried starting over another new file, same problem existed (tables/images do not show in design view) I am really confused. Any thoughts?
I've already done my research everywhere, but cannot find solution.

Thank you so much... it works...
I should come here earlier... wasted lots of time !!

How to fetch the data from databse table and get the required output

Hi,
I have made a project that connects CEP to database table but i m getting some problem in fetching the data from database.
From the following code :
If the where condition is removed then the application runs fine but i am still not able to fetch the data from the table because it is not showing any output.
Can anyone please suggest me that how to write WHERE statement correctly and how i will be able to see the output.
Following is the config.xml for processor:
======================================
<?xml version="1.0" encoding="UTF-8"?>
<wlevs:config xmlns:wlevs="http://www.bea.com/ns/wlevs/config/application"
     xmlns:jdbc="http://www.oracle.com/ns/ocep/config/jdbc">
     <processor>
          <name>JDBC_Processor</name>
          <rules>
               <query id="q1"><![CDATA[
                         SELECT STOCK.SYMBOL as symbol, STOCK.EXCHANGE as exchange
                         FROM ExchangeStream [Now] as datastream, STOCK
                         WHERE datastream.SYMBOL = datastream.SYMBOL ]]></query>
          </rules>
     </processor>
     <jms-adapter>
          <name>JMS_IN_Adapter</name>
          <jndi-provider-url>t3://CHDSEZ135400D:7001</jndi-provider-url>
          <destination-jndi-name>jms.TestKanikaQueue</destination-jndi-name>
          <user>weblogic</user>
          <password>welcome1</password>
     </jms-adapter>
</wlevs:config>
Following is the assembly file:
<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:osgi="http://www.springframework.org/schema/osgi"
     xmlns:wlevs="http://www.bea.com/ns/wlevs/spring" xmlns:jdbc="http://www.oracle.com/ns/ocep/jdbc"
     xmlns:spatial="http://www.oracle.com/ns/ocep/spatial"
     xsi:schemaLocation="
          http://www.springframework.org/schema/beans
          http://www.springframework.org/schema/beans/spring-beans.xsd
          http://www.springframework.org/schema/osgi
          http://www.springframework.org/schema/osgi/spring-osgi.xsd
          http://www.bea.com/ns/wlevs/spring
          http://www.bea.com/ns/wlevs/spring/spring-wlevs-v11_1_1_3.xsd
          http://www.oracle.com/ns/ocep/jdbc
          http://www.oracle.com/ns/ocep/jdbc/ocep-jdbc.xsd
          http://www.oracle.com/ns/ocep/spatial
          http://www.oracle.com/ns/ocep/spatial/ocep-spatial.xsd">
     <wlevs:event-type-repository>
          <wlevs:event-type type-name="StockEvent">
               <wlevs:properties>
                    <wlevs:property name="SYMBOL" type="byte[]" length="16" />
                    <wlevs:property name="EXCHANGE" type="byte[]" length="16" />
               </wlevs:properties>
          </wlevs:event-type>
          <wlevs:event-type type-name="ExchangeEvent">
               <wlevs:class>com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent</wlevs:class>
          </wlevs:event-type>
          <wlevs:event-type type-name="StockExchangeEvent">
               <wlevs:properties>
                    <wlevs:property name="symbol" type="byte[]" length="16" />
                    <wlevs:property name="price" type="byte[]" length="16" />
                    <wlevs:property name="exchange" type="byte[]" length="16" />
               </wlevs:properties>
          </wlevs:event-type>
     </wlevs:event-type-repository>
     <bean id="readConverter" class="com.bea.wlevs.adapter.example.JDBC_CEP.Adapter_JDBC" />
     <bean id="outputJDBCBean" class="com.bea.wlevs.bean.example.JDBC_CEP.OutputBean_JDBC">
     </bean>
     <wlevs:adapter id="JMS_IN_Adapter" provider="jms-inbound">
          <wlevs:listener ref="ExchangeStream" />
          <wlevs:instance-property name="converterBean"
               ref="readConverter" />
     </wlevs:adapter>
     <wlevs:processor id="JDBC_Processor" advertise="true">
          <wlevs:listener ref="OutputChannel" />
          <wlevs:table-source ref="STOCK" />
     </wlevs:processor>
     <wlevs:channel id="ExchangeStream" event-type="ExchangeEvent" advertise="true">
          <wlevs:listener ref="JDBC_Processor" />
     </wlevs:channel>
     <wlevs:channel id="OutputChannel" event-type="StockExchangeEvent"
          advertise="true">
          <wlevs:listener ref="outputJDBCBean" />
     </wlevs:channel>
     <wlevs:table id="STOCK" event-type="StockEvent"
          data-source="StockDs" table-name="STOCK" />
     <wlevs:table id="STOCK_EXCHANGE" event-type="StockExchangeEvent"
          data-source="StockDs" table-name="STOCK_EXCHANGE" />
</beans>
ExchangeEvent.java:
package com.bea.wlevs.event.example.JDBC_CEP;
public class ExchangeEvent {
     public String SYMBOL;
     public String symbol;
     public String exchange;
     public ExchangeEvent() {
     public String getSYMBOL() {
          return SYMBOL;
     public void setSYMBOL(String sYMBOL) {
          SYMBOL = sYMBOL;
     public String getSymbol() {
          return symbol;
     public void setSymbol(String symbol) {
          this.symbol = symbol;
     public String getExchange() {
          return exchange;
     public void setExchange(String price) {
          this.exchange = price;
Adapter Class:
package com.bea.wlevs.adapter.example.JDBC_CEP;
import com.bea.wlevs.adapter.example.JDBC_CEP.MyLogger;
import com.bea.wlevs.adapters.jms.api.InboundMessageConverter;
import java.text.DateFormat;
import java.util.Date;
import com.bea.wlevs.adapters.jms.api.MessageConverterException;
import com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent;
import javax.jms.JMSException;
import javax.jms.Message;
import javax.jms.TextMessage;
import java.util.ArrayList;
import java.util.List;
import java.util.Random;
     public class Adapter_JDBC implements InboundMessageConverter{
     @SuppressWarnings("unchecked")
     public List convert(Message message) throws MessageConverterException, JMSException {
          Random rand = new Random();
          int unique_id = rand.nextInt();
          DateFormat dateFormat;
          dateFormat = DateFormat.getTimeInstance();
          dateFormat.format(new Date());
          MyLogger.info(unique_id + " CEP Start Time is: " + dateFormat.format(new Date()));
          System.out.println("Message from the Queue is :"+ message);
          TextMessage textMessage = (TextMessage) message;
          String stringMessage = textMessage.getText().toString();
          System.out.println("Message after getting converted into String is :"+ stringMessage);
               String[] results = stringMessage.split(",\\s*"); // split on commas
               ExchangeEvent event1 = new ExchangeEvent();
               event1.setSYMBOL(results[0]);
     List events = new ArrayList(2);
     events.add(event1);
     return events;
Output Bean Class :
package com.bea.wlevs.bean.example.JDBC_CEP;
import com.bea.wlevs.ede.api.StreamSink;
import com.bea.wlevs.event.example.JDBC_CEP.ExchangeEvent;
import com.bea.core.datasource.DataSourceService;
public class OutputBean_JDBC implements StreamSink{
     public void onInsertEvent(Object event) {
     if (event instanceof ExchangeEvent) {
          ExchangeEvent cacheEvent = (ExchangeEvent) event;
     System.out.println("Symbol is: " + cacheEvent.getSymbol());
     System.out.println("Exchange is: " + cacheEvent.getExchange());
     System.out.println(DataSourceService.class.getClass());
Kindly let me know if you need further info.

Do you have StockDs configured in your server config.xml?
I think the query should look more like this:
SELECT stocks.SYMBOL, stocks.EXCHANGE
FROM STOCK as stocks, ExchangeStream [Now] as datastream WHERE stocks.SYMBOL = datastream.SYMBOL
Thanks
andy

How to track the changes to a table and update the other table ?

Hi Guys,
I am looking to track deletion of entries on KONV table and sync these missing entries in an other table which has primary key entries of KONV.
How to do this.. is ALE change pointer is any good for this purpose ?
Thanks
AJ

Hi Sam,
In order to track the changes in the KONV table, go to table CDHDR and give objectclass and objectid, you will get all the details.
Regards,
ramesh.

How do I lock the location of a table and still have the ability to edit it?

I actually have two questions.
1. I have a table that I made a master object for the purpose of having it on two pages. Becuase it is a master object, I am unable to input data into it. I'm fine with this because it's important this table remain exactly as it is. So I made another table with the same dimensions and put it on top, and turned off all the lines so you can only see the underlying table, and any data inputted looks as if it belongs to the master object. However, I spent an embarassingly long time trying to get the second, top table in position and I don't want it to move. Is there a way to lock it's location and still have the ability to input data?
2. I would like to copy and paste the above-mentioned second table. However, when I do so, the dimensions change. Some of the rows line up with the master-object underlying table, but some are way off. I have no idea why this would be. I went into the settings of both and made sure their measurements were the same. Rows, columns, x, y; everything. As a temporary solution, I made the top-table a master-object, which put it on both pages and then I 'unmade' it a master-object.
Any ideas? Thanks for your time!

This may not be the most efficient method, but drag it to your desk top. Delete the image in iPhoto, re-import the image and merge it into the event where you want it.
You may also consider posting this query on the iPhoto forum. You will have a wider audience and one that is oriented towards this application.
Ciao.

Draw the Borders on the Table and Loop Contents.

Similar Messages

Maybe you are looking for