Drawing a horizontal line

I have a LineChart, with a few series on it, and I want to
draw horizontal lines to indicate when the series fell above or
below various critical values. I can't find a way to do this other
than to make each line a series of two points, but this seems like
sort of a hacked way to do this. Is there a more direct way?

Similar Messages

Draw a horizontal line in ms word using dde

Hi All
I m trying to draw a horizonatl line in ms word through forms usind DDE. can anyone tell me how to do that? I m using forms6i, word 2003 on windows xp
thanks
hash

Consider switching to OLE using the OLE2 built-in. Word's DDE command set is outdated and, as you probably have realized, poorly documented. If you must use DDE, I've heard that Word's old macro language -- WordBasic -- is very similar to its DDE command set. Perhaps you can find an old WordBasic book, or an online WordBasic reference.
Hope this helps,
Eric Adamson
Lansing, Michigan

How to draw horizontal line in smartform after end of the all line items

Hi Friends,
I am working on the smartform. I have created TABLE node in Main window.
i want to draw a horizontal line after end of the main window table node. i mean after printing all the line items of the table, I need to print one horizontal line.
Could you please help me how to resolve this issue.
FYI: I tried with the below two options. But no use.
1. desinged footer area in the table node of the main window.
2. tried with uline and system symbols.
please correct me if i am wrong. please explain in detail how to draw horizontal line after end of the main window table.
this is very urgent.
Thanks in advance
Regards
Raghu

Hello Valter Oliveira,
Thanks for your answer. But I need some more detail about blank line text. i.e thrid point.
Could you please tell me how to insert blank line text.
1 - in your table, create a line type with only one column, with the same width of the table
2 - in table painter, create a line under the line type
3 - insert a blank line text in the footer section with the line type you have created.

How to draw vertical and horizontal lines on chart as shown in image below%3F

Hi,
Is it possible to draw a horizontal line (63% as shown in image or 15.75 and vertical line at intersection to X axis) in chart.
please suggest code
Regards
mms79

Have you tried using cursors? Right click on the chart and show the cursor legend. Then right click the legend and add a cursor.

Horizontal line safari

Over the weekend my safari browser started drawing a horizontal line about 5 spaces up from the bottom edge. Other apps don't have this line appearing on the screen. iOS 6.1.2 is my current rev level.....this is not a show stopper but annoying. Has anyone else have this extra line drawn at the bottom segment of the screen?

Michele,
I know this was mostly answered, but I am there with you. It's a very frustrating problem and you are not alone.
Merging the keyboard and splitting it again, as well as hard closing Safari, seemd to fix it, if only temporarily.
Slightly lifting the split keyboard from the bottom seems to completely solve this SEVERELY annoying and temper tantrum inducing problem. It has taken me more time than I'd like to admit to fix this, and I have my doubts that it will work permanently as well.
But anything that MIGHT work is better than dealing with this issue.
It may seem minor to some, but for a lot of us, it is very distracting and annoying.
I keep hoping with each and every update that it's fixed, and am disappointed each and every update.

Horizontal line at the end of page within for each

I try to do the following with PO :
When a PO lines take several page to print I want to draw a line at the end of the page.
<xsl:for-each select=".//LINES_ROW" xdofo:ctx="3" >
<fo:table-row keep-with-next.within-page="always" keep-together = "always" xdofo:repeat="R">
<fo:table-cell keep-together="always" xdofo:use-attribute-sets="lc_4" >
<fo:block xdofo:use-attribute-sets="lb_2 lb_5">
<fo:inline id="Text12{$_XDOFOPOS}"/>
<fo:inline id="Text10{$_XDOFOPOS}"/>
<fo:inline id="Text11{$_XDOFOPOS}"/>
<fo:inline id="Text5{$_XDOFOPOS}"/>
<fo:inline xdofo:use-attribute-sets="li_1">
<xsl:value-of select=".//ITEM_DESCRIPTION" xdofo:field-name="ITEM_DESCRIPTION"/>
</fo:inline>
>
</fo:table-row>
</xsl:for-each>
Now when i reach the end of a page I can't draw a line is there a way to draw an horizontal line ?
Thanks for the quick answer

Did you ever get an answer to this? I have the same question.

How to draw horizontal line at the end of table for multiple line items

Dear Experts,
                   Pls can anyone help me how to draw horizontal line at the end of table for multiple line items . kindly help me regarding this
Thanks
Ramesh Manoharan

Hi
   I tried as per your logic but it is not solving my problem . when i am gone to table painter it is showing line type 1 and line type 2
is below format.. if u see here line type 1 bottom line and line type 2 top line both are same.. so how to avoid this ?
                          line type 1
                         line type 2

Display draws horizontal lines

Hi!
My Ipod suddenly started to get display errors. At first there were just a few horizontal lines, but now the display is either clear white or only draws horizontal lines and it does not display anything right.
I tried to restore it and at first the display was ok, but after turning it off one time and turning it back on the display was corrupted again. I tried to reset it again, but it did not help anymore.
But i can't believe the display itself is broken, because the first time after the reset it was a perfectly clear image.
btw. This just had to happen shortly after the warranty period is over -_-

well, in my 1st gen iPod nano 1gb, it happened.
I went to the nearest apple retailer and the guy said:
"it's broken. You'd better get another one, cause this... Is gone."
"the fix going to be more expensive than buying another one"
So, forget it! Buy onther iPod or MP3

Need to print horizontal line at the end of main window in each page.

Hi,
I am printing a smartform with main window having 10 lines in footer. The problem I am facing is when the content extends upto two or more pages, I am not getting the horizontal line at the base of main window. For last page it is fine as it contains footer.
Please suggest how to proceed.
Thanks,
RKU

Hi,
If you don't have any frame set on your main window:
Go to output options and mark frames, and then go to details and uncheck checkboxes for above, laft and right, leving only below marked.
This will give you a line in the bottom of you main window.
If you dont' want to do this on the main window, can you create a new window placed at the bottom of the page and use this framing technic on that window. But in that case don't forget to mark the "always draw box and shading" checkbox. as this window contains no values, the will not get printed unless you mark this checkbox.
Regards
Åsa Thenstedt

BOX command does not print vertical/horizontal lines in SAP Script

Dear all,
in sap script we are using the BOX command to draw some boxes. DUring the print preview, all the boxes look
just fine including horizontal and vertial lines. But, when we print the output, I get the output minus
the vertical lines and some horizontal lines.
Regards,
rukku
Edited by: Rukmangada Reddy Ramala on Mar 23, 2010 2:23 PM

Hi rukku,
Which device type are you using?
Please have a look at SAP notes:
77976, 19807 and 183948.
Regards,
David

How to create horizontal line dynamically after evry line item

Hi all,
I have to redesign the sapscript.
For a invoice for every new material a horizontal line will be drawen.After that for that material all new line item will be displayed than again a horizontal line should drawn.
In dynamic how i can know how many line item will be there for the particular material.
Guranted points will be rewarded .
Regards
raj

Hi
1st u draw a table and in that u mention all the line items. You can change the size from there it self
    The Code is here for drawing the Box for Total in last page (where there is no next page)
    /:   IF &NEXTPAGE& = 0
    /:   BOX FRAME 10 TW
    /:   BOX HEIGHT 0.8′ CM FRAME 10 TW
    /:   BOX HEIGHT 1.9′ CM FRAME 10 TW
    /:   BOX XPOS 2.5′ CM YPOS 0.8′ CM WIDTH 1.1′ CM HEIGHT 1.9′ CM FRAME 10 >
Now some help from help.sap.com to understand the code better
1. /: BOX [XPOS] [YPOS] [WIDTH] [HEIGHT] [FRAME] [INTENSITY]
Reward all helpfull answers
Regards
Pavan

Little horizontal lines at the left side of the page, printed on the HP Laserjet 4 plus?

Folks, It seems that when I print to my HP laserjet 4 plus, I see some tiny horizontal lines on the left side of the printed page, spaced 4-5 inches apart, all at the very furthest left side of the page. Is this something that I can turn off? Are they some sort of binding marks? I am printing to this printer via jet direct card, over TCP/IP, from a Windows 7 64 bit PC. I love this printer, and recently changed out the exit assembly rollers, and now works like it was new. I also have a 500 sheet drawer and a duplexer installed on it, and I would like to figure out how to get rid of those little horizontal tick marks that show up on the left side of the page. Any help or assistance is GREATLY appreciated, Thanks so much in advance!

Hello @MattDillon , and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Drawing a diagonal line?

Hello,
This seems like a silly question but does anyone know how to draw a diagonal line that has on-click functionality to input data as well as value based alerts? Raw xcelsius seems to only come with horizontal and vertical lines. I tried using Innovista's enhanced line component but it doesn't function correctly (visibility doesn't work) and there aren't any alerts. The reason I need diagonal lines is because I am attempting to create a very simple display where nodes are laid over a map with lines connecting them together. Each of the nodes reflects the health of that node, and the lines reflect the health of each connection. Any ideas?

Hi KTBusy ,
You can use image to display diagonal lines (make sure you use .png format so that background remains transparent). Now on top of that use transparent toggle button or push button for alerts or populating values (what ever you want). This will give you the functionality you might be looking for.
Good Luck & keep Posting.

Horizontal Lines - Yuk!

Hi,
This is my system:
AthlonXP 2200+
512mb DDR 2100
KT4V K7
Gf4 Ti4200 128mb
Sound Audigy 2
420W PSU
I seem to get these horizontal lines in both 2D and 3D applications and i get it everywhere, especially as i move across the screen in a 2D or 3D game. The graphics don't "flow", it almost looks like the graphics get caught on these horizontal lines on the screen and then pull away. Almost a dragging effect. These horizontal lines aren't physically visable, but the dragging of the graphics shows up the lines.
I have the tried new and different drivers, BIOS, and directX and now am looking for proffessional help. Can anyone help me ?( ?
Thanx, Highflyer

first do you have the latest 41.09 drivers from nvidia,,,second do you have the latest hyperon 445 drivers from via,,,third do you have it overclocked to much,,i havent been able to get mine past 300 core and 600 memory on these cards,,also at your own risk you might set your agp volts to 1.6 or 1.7,,seemed to help stabilise mine,,,check your screen on another computer,,,might also try resetting your direct draw,,,go to start,run,type in dxdiag enter,go to display tab,disable direct x features all,close restart,go back and turn them on and restart..... hope this helps,,,if youve already done all this break glass and pull alarm :D

Horizontal Line seperator

In the details I need to add horizontal lines between each row. How can I, apart from drawing a line explicitly.
The purpose is to draw a table that fits the data perfectly.

Now I am having extra lines in the 2nd page..when I move the Detail B section up..then the first page has extra lines..oh its not working perfectly
I just want something simple like this..within a table..and the Column names are in the Page HEader and the rest of them in details.
FirstName     LastName     DOB
Mike     J     1964-11-10
Lewis      Hamilton     1981-09-08
Jenson     Button     1979-02-02
Thats a simple str8 forward and mostly used format I guess..is it so difficult in crystal reports.
Edited by: BA Posts on Nov 11, 2009 9:19 PM

Drawing a horizontal line

Similar Messages

Maybe you are looking for