Drawing a line causes it to turn straight instead of curving like it should. Help please?

This is what i get when i try to draw. i've read all the other threads about this. nothing helps. I'm the latest version of flash, everything is updated on both my drivers, tablet and adobe. I'm using a wacom pen and touch tablet, windows 7, 64bit. No fixes have helped so far that i've seen.

When using a drawing tool there should be sth. available that is called Pencil Mode
In the screenshot above its the icon on the right that looks like an S. Per default this mode is set to "straighten" which gives that
edged looks you are showing.

Similar Messages

  • Why can't i save my WiFi password in my IPad? Every time i turne my iPad off the password disappear! Help please!!

    Why can't i save my WiFi password in my IPad? Every time i turne my iPad off the password disappear! Help please!!

    Create a new SSID and password for your router.

  • I turned my imessage off, and now when i try to turn it on it isn't working, any help please?:)

    i turned my imessage off, and now when i try to turn it on it isn't working, any help please?:)

    See if your Mac will boot from the install DVD.
    Then uninstall Internet Cleanup.
    Allan

  • Deskjet 3070A on line and connected by PC says unable to print, as not connected - help please

    I am on a laptop using Windows 7. I recently moved the printer to a different location. I have tried to print but to no avail. I have re-installed the CD and re-configured the wireless, restarted both printer and PC but no matter what, when I try to print, my PC comes up with the printer is offline error and will not print.
    Can anyone help please?
    This question was solved.
    View Solution.

    Go to Control Panel > Printers and delete all old instances of the printer.
    1. Make sure the printer is turned on and connected to your network. Verify that you can access the printer's internal web page by browsing to its IP address before continuing. Get its IP from a Network Test printed from the front panel of the printer.
    2. Click >> Start >> Control panel >> Printers.
    3. Click the Add a printer
    4. Select Local printer
    5. Select Create a new port and select Standard TCP/IP Port and click Next button.
    6. Under Device type, select TCP/IP Device. Under Hostname or IP address, enter the printer's IP address. Click Next.
    7. Select Hewlett-Packard from the list of manufacturers and select and select your printer model. Click Next.
    If your printer model was not listed, then select Have Disk, browse the HP CD that came with your printer and select the first file that starts with hp and ends with inf. Click Open then OK. Select your printer model. Click Next.
    8. If you are asked, use the currently installed driver.
    9. It will ask for the Printer name -- enter a new name or use the existing one. This will be the name of the printer that you select from other applications.
    10. You may be asked to share the printer. Choose NO.
    11. The Print Test Page box appears. Go ahead and print it.
    12. Click Finish.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Please Help!!! My iPod Touch 5th gen will not turn on!!! If anyone can help, please do so!!!

    I connected an iPod shuffle charger to the earphone slot of my iPod touch 5th generation and now it will not turn on at all!!! Can anyone please help me with this problem?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset
    http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414
    ChrisAllen109 wrote:
    I connected an iPod shuffle charger to the earphone slot of my iPod touch 5th generation and now it will not turn on ...
    But it looks like a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is required...
    Be sure to make an appointment first...

  • I did a back up and then restore but my phone just wont turn on i only see the apple and the little circle lines like a clock help please

    My Wi Fi was not working it said no address so I backed up my phone then did a restore. However since i did the restore yesterday morning 10am the phone has not come back up all thats happening is the silver apple with the little circular lines keep moving the if flashes and goes off and ncomes back up doing the same thing over and over. can you ploease assist me i depend totally on my phone, Thanks in advance

    Try this article - http://www.apple.com/support/iphone/assistant/

  • Replace Color  - selected areas turn gray instead of desired sample color.  HELP?!

    Hi, I am using Photoshop CS3 and have a question regarding "replace color."
    First...here are the steps I enacted prior to trying to use the 'replace color' function:
    1. In RGB Mode - - Selected and filled a shape a color.
    2. Ran the selected object through Alien Skin/Impact "Chrome" function.
    3. Selected 'adjustments/desaturate.' Did this so that I could then go to Adjustments/color balance..... and then change the entire color of the object to a predominantly red chrome looking scheme.
    4. After giving the object a 'chrome' appearance, I wanted to go into the 'white' hilite areas of the object and sample them - and then change them to a bright red color....this is where the 'REPLACE COLOR' function comes in.
    5. So I use the color sample eye dropper within 'REPLACE COLOR' and select the white areas I want to change to red...as the 'selection color.'
    6. Then, I click down in the lower color box (result color) and sample a color that I want to change the white hilite areas to...in this case, red.
    7. This is where the problem occurs - - even though I chose a result color of red...the white areas turn to grayscale within my colored object...so just those areas are gray!!! What the heck??!!
    So... how can I desaturate a selected object... then recolor it using 'Color Balance'.... and then replace colors and have the replaced colors actually be a color instead of a gray color?
    My file is in RGB mode and everything else is in COLOR.... yet I cannot replace areas within this colored graphic with other colors...it just keeps putting gray tones into the object.
    HELP??
    Thanks.

    Hi Curt - - this occurs even if I select a color within the same file... something about desaturating the file and then adding color back into it...I can't get it to replace color after that.

  • HT1688 When I receive a picture or take one, I use to be able to turn the phone to fill the screen now the pictures will not turn when I rotate phone iPhone 4. Help please

    When I first got my iPhone when I received a picture or took one I could turn phone and picture would turn to fill the screen. It will not do this anymore, is there a setting I need to correct? Ty

    Rory,
    I have the same issue, but my screen is not locked as you instructed Little5571.  Neither images or webpages rotate to landscape when I turn my phone.  Do I need to do a factory reset and restore to fix this issue?
    Sstrynar

  • My iPhone is randomly calling people turning on and off going to voice control HELP please

    My iPhone is doing random things such as calling people some I don't even know turning itself on and off and going between apps and screens HELP

    Try resetting it: Hold the home butting + lock button for 10-12 seconds until the Apple logo appears.

  • My I phone 4 keeps dying and I keep restoring it and now I don't even have a decent downloaded Itunes on my computer? When it is about to dye it turns a Sepia color than keeps rerouting. Help please?

    I phone keeps dying I have had it since 12/2012, Christmas past 2 months started dying and then keeps trying to reroute, I have restored it 20 or more times. Right before it dyes the screen turns Sepia Brown and then nothing. Now computer is telling me that Itunes is corrupted. Any ideas???  Much appreciated and Thank You.

    Sounds like an impending failure of the phone. Try to get a good backup of all data and photos. Then Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

  • Firefox4.0 causing graphic card NVIDIA kernel mode drive to crash frequently. Help please.

    4th time asking.

    I'm not suggesting otherwise, I just want to learn "how to fish" as they say. What was in the report that indicated a memory issue? Should I simply re-seat the memory, check it in recovery mode or just toss it out and put the old stuff back?  I have many years of IT work under my belt, but interpreting crash reports is new to me and I'm hungry to learn!

  • Help please no luck recording vinyl thru line-in port on External USB Soundblaster Live 24bit

    Help please! I have connected LP turntable (I am assured which has preamp inbuilt) to line-in port on S/Blaster external using lead inbuilt from?turntable with white/red RCA plugs with a line -in plug converter. Then connected external soundcard?to the notebook USB-USB as per manual. I have tried Creative's Smart Recorder but it shows no sound coming through on Analysis (same with Audiograbber software too). Sound card diagnostics show sound card OK and I can plug in headphones and get output. I am thinking hardware connection issue as I connected direct from turntable to microphone input &?got loud mike low quality recording but I ustand this is not recommended as can blow sound card (and poor receording anyway)?Is there another device I can easily plug into line in to test - or any other ideas gratefully received.

    hardingt2345 wrote:
    Help please! I have connected LP turntable (I am assured which has preamp inbuilt) to line-in port on S/Blaster external using lead inbuilt from?turntable with white/red RCA plugs with a line -in plug converter. Then connected external soundcard?to the notebook USB-USB as per manual. I have tried Creative's Smart Recorder but it shows no sound coming through on Analysis (same with Audiograbber software too). Sound card diagnostics show sound card OK and I can plug in headphones and get output. I am thinking hardware connection issue as I connected direct from turntable to microphone input &?got loud mike low quality recording but I ustand this is not recommended as can blow sound card (and poor receording anyway)?Is there another device I can easily plug into line in to test - or any other ideas gratefully received.
    Have you tried by installing www.asio4all.com drivers and then by using some?ASIO capable recording software as like Kristal, VSTHost, Reaper, etc (there are many others available)?jutapa

  • How do I get the screen to refresh when drawing a line larger than the art board

    How do I get the screen to refresh properly when drawing a line larger than the art board when the screen scrolls? Everything turns white in CS6, CS5 and CS4.

    Existing art - not the new art.  The new art just gets a proxy shape - seen in my example as the blue rectangle.  The existing art is what gets smeared as you drag past the edge of the screen.  If it's anything other than an Ilustrator thing, it's a Mac thing. I've never known it to be any other way other than maybe in the past showing blank white instead of stuttered art on probably 10 different macs over the years.
    Take any art that you've ever created.  Zoom in so that your art is bigger than your screen (so that there's somewhere to scroll).  Rectangle tool (or move, scale, rotate(?) something, or draw a line) Start your rectangle anywhere, drag so that you are at the edge of the screen, causing it to scroll.  The existing art will get all effed up.  The rectangle you're drawing will draw as you expect it to - that's not the issue.
    How does Wade take his videos?

  • Display draws horizontal lines

    Hi!
    My Ipod suddenly started to get display errors. At first there were just a few horizontal lines, but now the display is either clear white or only draws horizontal lines and it does not display anything right.
    I tried to restore it and at first the display was ok, but after turning it off one time and turning it back on the display was corrupted again. I tried to reset it again, but it did not help anymore.
    But i can't believe the display itself is broken, because the first time after the reset it was a perfectly clear image.
    btw. This just had to happen shortly after the warranty period is over -_-

    well, in my 1st gen iPod nano 1gb, it happened.
    I went to the nearest apple retailer and the guy said:
    "it's broken. You'd better get another one, cause this... Is gone."
    "the fix going to be more expensive than buying another one"
    So, forget it! Buy onther iPod or MP3

  • Here are my last 3 duke dollars.  Can someone please help me draw a line?

    I have been BEATING my head on this for well over a week now. I'm new to Java2D and I cannot find even one example of this simple little thing that I am trying to do. Not one.
    All I want to do is draw an image, zoom that image, then draw some lines on that image, and then zoom it and have those lines show up where they should.
    For example, we have an image which has been zoomed. No lines are yet drawn on it.
    A line is added.
    The image is then zoomed in or out one more time.
    How do we get the line to remap to the newly zoomed image?
    What I am doing is:
    0) Load up an image from a file.
    1) Create a zoomed image by using the Image.getScaledInstance() method.
    2) Create a BufferedImage with the width and height of the image AFTER the zoom has taken place.
    3) Create a Graphics2D object by the createGraphics from this BufferedImage.
    4) Place the image into the BufferedImage by doing a BufferedImage.drawImage
    5) Select two points to be the start and end of the line.
    6) Draw the line using Graphics2D.drawLine(start.x, start.y, end.x, end.y).
    7) Zoom the image again (using the Image.getScaledInstance() method.
    8) Create a new ImageIcon using the image from above and override its paintIcon method like this:
    ImageIcon newIcon = new ImageIcon(newImage) {                       
    public void paintIcon(Component c, Graphics g, int x, int y)
    super.paintIcon(c, g, x, y);
    zoom(); //<---- ZOOM call
    Now in the zoom routine, what do I need to do to get the lines to draw at the proper location and size?
    Remember, the points of the lines (stored in a list as home grown line objects) are in screen coordinates, not image coordinates since they are just click points
    Note that when I use these points to draw a line, all is well (the line gets drawn where it should), but I have problems when I zoom the image.
    Thanks!

    Below is the documentation and method signature of
    Graphics.drawImage(Image img, int dx1, int dy1, int dx2, int dy2, int sx1, int sy1, int sx2, int sy2, ImageObserver observer);The important thing to note is that it does scaling on the fly if the size dictated by the source co-ordinates is defferent than the size dictated by the destination co-ordinates. The source image is always left un-touched.
    So basically your visual data is located in an offscreen image. You can draw a line on that. Then create a new image, get it's graphics and call drawImage(original_image, co-ordinates that cause it to scale how you like).
    Then you can draw lines on the 2nd image, create a 3rd, ...etc
         * Draws as much of the specified area of the specified image as is
         * currently available, scaling it on the fly to fit inside the
         * specified area of the destination drawable surface. Transparent pixels
         * do not affect whatever pixels are already there.
         * <p>
         * This method returns immediately in all cases, even if the
         * image area to be drawn has not yet been scaled, dithered, and converted
         * for the current output device.
         * If the current output representation is not yet complete then
         * <code>drawImage</code> returns <code>false</code>. As more of
         * the image becomes available, the process that draws the image notifies
         * the specified image observer.
         * <p>
         * This method always uses the unscaled version of the image
         * to render the scaled rectangle and performs the required
         * scaling on the fly. It does not use a cached, scaled version
         * of the image for this operation. Scaling of the image from source
         * to destination is performed such that the first coordinate
         * of the source rectangle is mapped to the first coordinate of
         * the destination rectangle, and the second source coordinate is
         * mapped to the second destination coordinate. The subimage is
         * scaled and flipped as needed to preserve those mappings.
         * @param       img the specified image to be drawn
         * @param       dx1 the <i>x</i> coordinate of the first corner of the
         *                    destination rectangle.
         * @param       dy1 the <i>y</i> coordinate of the first corner of the
         *                    destination rectangle.
         * @param       dx2 the <i>x</i> coordinate of the second corner of the
         *                    destination rectangle.
         * @param       dy2 the <i>y</i> coordinate of the second corner of the
         *                    destination rectangle.
         * @param       sx1 the <i>x</i> coordinate of the first corner of the
         *                    source rectangle.
         * @param       sy1 the <i>y</i> coordinate of the first corner of the
         *                    source rectangle.
         * @param       sx2 the <i>x</i> coordinate of the second corner of the
         *                    source rectangle.
         * @param       sy2 the <i>y</i> coordinate of the second corner of the
         *                    source rectangle.
         * @param       observer object to be notified as more of the image is
         *                    scaled and converted.
         * @return   <code>true</code> if the current output representation
         *           is complete; <code>false</code> otherwise.
         * @see         java.awt.Image
         * @see         java.awt.image.ImageObserver
         * @see         java.awt.image.ImageObserver#imageUpdate(java.awt.Image, int, int, int, int, int)
         * @since       JDK1.1
        public abstract boolean drawImage(Image img,
                              int dx1, int dy1, int dx2, int dy2,
                              int sx1, int sy1, int sx2, int sy2,
                              ImageObserver observer);

Maybe you are looking for