DRDA is installed just on the Oracle side?

After reading this I still dont get it...
http://download-east.oracle.com/docs/cd/B19306_01/gateways.102/b16217/intro.htm#i3621
This documentation does not get to the point at all. It is not written at a level for people who have never installed a Transparent Gateway...
So, If I install the DRDA type Transparent Gateway I'm hoping I only have to put software on the Oracle side - my side? Not the DB2 side? I saw via someone else's post where during DRDA setup a package is created on DB2 side by issuing commands on the Oracle side?
If this is true, which I hope it is, why and what benefit is obtained by installing the other type of gateway Transparent Gateway for DB2 (TD4DB2) which requires installation of software on both sides - I think?
I would like to only have to install software on the Oracle side since the DB2 machine is not owned by us and all we will have is a user account on the DB2 side.
Give me few quick pointers please.. Thanks...

The DRDA Gateway software is only installed on the the Oracle server machine (or a 3rd machine).
There are several notes on Metalink "How to setup TG4DRDA" which explain in detail WHAT steps are required to configure the gateway.
Regarding the Bind package: at the Db2 database the 2PC table must be created and then use SQL*Plus to bind a package at the Db2 side.
This is mandatory for the DRDA gateway, but I want to make it clear again: NO software is installed on the DB2 machine.
So the difference between the TG4DB2/400 and TG4DRDA is the location of the software.
TG4DRDA is installed on Unix or Windows platforms, commonly in the Oracle database home whereas TG4DB2/400 is installed on the AS400 machine.

Similar Messages

ERROR: Install cannot verify the oracle 10g Database

I just completed installation of the SES 10.1.8.2 version and am now trying to apply the 10.1.8.4 Service Pack. After the OUI screen asks for my sys password, I click on Next and receive a popup error message that reads,
Install cannot verify the oracle 10g Database. Please ensure that the database and its listener are running and please verify that the information you entered is correct.
The installer log file (installActions2010-04-15_08-56-19PM.log) shows this:
*** Specify the SYS Password Page***
Calling Query EmQueries4.2.2 checkUserExists
schemaName = SYS
schemaPassword = Protected value, not to be logged
connectString = (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=HostNodeName_1)(PORT=1521))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=Ses01.HostNodeName_1)))
userName = EQSYS
Query Returned: ERROR:Exception occured while connecting to database. Please check the connection details of the database you specified and retry.
Io exception: Got minus one from a read call
Error:*** Alert: Install cannot verify the Oracle10g Database. Please ensure that the database and its listener are running and please verify that the information you entered is correct. ***
User Selected: Yes/OK
===
I've verified that I can login as EQSYS using sqlplus. Also tested that I can login as sys, too. I've also tested the login using the Admin console and that is fine, too.
Any ideas on what is causing this or how to fix it is most welcome as I've not encountered this error before when installing SES or a service pack. I've even tried the OUI for Service pack 10.1.8.3 but also get the same error.
I've checked the listener.ora and tnsnames and they are OK. I've checked and the listener is running and so is the DB.
Right now, I have the Oracle SES instance up and running at 10.1.8.2 but need to upgrade this to the same level as the other SES search nodes.
Edited by: user8655787 on Apr 15, 2010 2:18 PM
My listener.log file is showing this message each time, I run the OUI and enter the sys password and click "Next"
15-APR-2010 23:17:05 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client

A couple of other things that I have tried but have had no affect. I'm still getting the same error:
1. Tried recreating the orapwd file
orapwd file=orapwprdses01 password=prdses01
And make sure that the pfile or spfile has:
remote_login_passwordfile='EXCLUSIVE'
another OTN posting said to try this:
1. Go to directory $ORACLE_HOME/network/admin
2. Modify sqlnet.ora file with following parameter:
tcp.validnode_checking = no
3. If you don't want to disable this, you can put the machine names as follows:
tcp.invited_nodes=(machine1, machine2)
3. Bounce the listener.
.... but, I'm still getting the same error when trying to run the .runInstaller OUI for the service pack for 10.1.8.4.

IP Address Changed in the Oracle SID

Dear Team ,
I have Changed the IP address of the Oracle SID I am using (ORACLE 10g) in Listener.ora and tnsnames.ora file .
While I am starting my application I got this below error.
Io exception: The Network Adapter could not establish the
connection
Is there any procedure to be followed while changing the Ip Address .
Kindly help me to sort out this Issue .
Regards ,
Augustine

Augustine Vinish wrote:
Dear Team ,
I have Changed the IP address of the Oracle SID I am using (ORACLE 10g) in Listener.ora and tnsnames.ora file .
While I am starting my application I got this below error.
Io exception: The Network Adapter could not establish the
connection
Is there any procedure to be followed while changing the Ip Address .
Did you restart the listener after changing the ip address in listener.ora?
Also check /etc/hosts file...
If your server IP is changed then you need to make changes in listener.ora and tnsnames.ora only..
Regards
Rajesh

What to backup on the Oracle side of the house from the Sys Admin

I'm being asked what specifically needs to be backed up on the Oracle side from the server guys... Right now we're running a all of our test instances in non-archivelog mode, so we're doing cold backups... other than the actual backup files, what else needs to be backed up.
Oracle 11gR1 on AIX

salibcs wrote:
what else needs to be backed up.Why not backup everything on the server? It's much easier to do a full backup of all server volumes than it is to include some directories while excluding others. The moment you exclude something from your server backup will be the moment whatever was excluded is lost and you will wish you had that backed up.
Cheers,
Brian

Why can I download and install all of the Oracle ATS products for free?

Why can I download and install all of the Oracle ATS products for free? When I installed, I was not prompted for any licenses or to purchase anything.
I want to know why this is possible and if there are plans to charge for it in the future?

I don't know Oracle's ATS products specifically, but many of Oracle's products can be downloaded and used for free for learning purposes.
Typically, if you intend to use the products commercially then you need to pay for a licence, otherwise you are using it illegally.
This is usually described in the T&C's you agree to when you download the software.

Problem installing CC on the PC side of a mini Mac

Hi,
My employer has two computers that only I work on. One is an iMac using the Mac OS and the other is a miniMac using Parallels8 where I use the PC side.
This is a security measure that my employer insists on since we cannot afford to have any productivity downtime in the event that one of the machines fail.
CC works perfectly fine on the iMac's OS, but when I went to install it on the PC side of the miniMac it simply won't allow me to and keeps brining up the message: "Download error. Please contact customer support."
I have contacted customer support and they were unable to help me, and pointed me in the direction of these forums.
Our user licence should allow us to have CC installed simultaneously on both the PC side and Mac side.
Any workable solutions I can implement would be much appreciated.

Hi Supas33k3r,
This document explains Adobe's support boundaries for virtual environments http://helpx.adobe.com/creative-suite/kb/technical-support-boundaries-virtualized-or.html
Would installing Windows through Bootcamp be an option on your Mac rather than going through Parallels?
-Dave

Hi...I have a Macbook mid-2009 which has both Mac OS Mountain Lion and Windows 8.1 32-bit?Is there a way to install bootcamp on the windows side?

I have both Mac OS Mountain Lion and Windows 8.1 32-bit installed....The machine is Macbook Mid 2009...Whatever i do i can't install and use bootcamp on the Windows side.........Apple Support says it only supports Windows 64-bit which my machine cannot install.......and when i tried to install Bootcamp 4 it says it only supports Windows 7 .........Is there no way to install and use Bootcamp without buying another computer?

Boot Camp - Apple Support
Boot Camp- System requirements for Microsoft Windows operating systems

I purchased Lr3 (disc) and never installed. I now have a Mac laptop, no disc drive. Can I install just using the serial

I purchased Lr3 (disc) and never installed. I now have a Mac laptop, no disc drive. Can I install it just using the serial #? If so how?

You can get a download for Mac at this link and then validate it with your serial number.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4927
Note that LR3 was designed for OSX 10.5 or 10.6. It will run on 10.9 (Mavericks) but there may be some appearance differences to the sliders. But why not give the download a try. Otherwise you may be best to upgrade to LR5 or wait for LR6.
See Victoria’s link for further information:
http://www.lightroomqueen.com/lightroom-compatible-os-x-mavericks/

How can i choice not to install XMLDB in the oracle 10g 's installation ?

thank you !

because after i completed the installation of oracle10.1.0.2.0,when i need export my database ,it is always happen some err about XMLDB ,for example ,"PLS-00905: object XDB.DBMS_XDBUTIL_INT is invalid" and like this !
but if i use catnoqm.sql to remove XMLDB from oracle , it will be another err about ". . exporting table R_NOTBAKTAB 21 rows exported
EXP-00091: Exporting questionable statistics.
EXP-00091: Exporting questionable statistics."
so i want not to install XMLDB in the installation of oracle!
thank you very much !

Error during install when doing the Oracle Database Configuration Assistant

OS: Windows 2003 Server
Oracle Version: 10g
Error: ORA-12638: Credential retrieval failed
Why would we get this error on a new install? I'm finding Oracle extremly difficult to even get installed. We couldn't get it to install on a Windows XP Pro machine and now we can't get it to install on a 2003 Server machine. I have no problems with Microsoft SQL server installs. Any help would appreciated. As I understand even though we are an Oracle partner we still would have to pay for phone support. We would just get a discount. Any help would be greatly appreciated. We need to get Oracle running ASAP.

I ran into this error at a customer's location where Active Directory was being used. This is how I fixed it:
Open the sqlnet.ora file (located at <ORACLE_HOME>\network\admin) with notepad and comment out the following line:
<tt><b>#SQLNET.AUTHENTICATION_SERVICES= (NTS)</b></tt>
Here's a quick explanation of why this error occurs:
<blockquote>ORA-12638: Credential retrieval failed
Cause
The database and client always cross authenticate each other if NTS authentication is negotiated.
This is regardless of whether the user will ultimately be authenticated by the database using a user name and password or OS credentials. NTS authentication happens at the start of the handshake. For NTS authentication to succeed both the client OS user and the database server must be in the same domain or in two domains which trust each other.
Solution
Either create trust between the two domains or change the client or server SQLNET.AUTHENTICATION_SERVICES such that NTS in not negotiated in the connection handshake. NTS is only negotiated if both client and server have SQLNET.AUTHENTICATION_SERVICES set to NTS.
Credential retrieval failed
HTH,
Jim

Very annoying 11g OUI install error for the oracle clusterware

Clean install of 11g RAC Clusterware downloaded from oracle site today
./runcluvfy.sh stage -pre crsinst -n lin1,lin2 -verbose
...everything passes just fine. Great. Time to install the clusterware.
[oracle@lin1]$ ./runInstaller
Installer starts, prerequisite checks are done for **Oracle 9.2 RAC and OCR*** Where did 9.2 come from?. All the checks succeed so... whatever...just move on.
I get a few screens to the "Specify Cluster Configuration" sceen.
I enter the following for the Cluster Name: lin_cluster
I enter the following for the 2 nodes:
Public Node Name Private Node Name Virtual Host Name
lin1 lin1-priv lin1-vip
lin2 lin2-priv lin2-vip
Click next.....ack!! Error: "You must enter unique values for the public node name, the private node name and the virtual hostname for all nodes in the cluster. The name, lin1, that you entered is being used by more than once [sic] for the same node"
So, what to do? How more unique can the names be?
There is an option to "Use A configuration File..." and browse for it. Anyone know where that file is?
Any assistance much appreciated.

Ice,
Yes my friend...well done. There was an incorrect entry in my /etc/hosts file as follows:
[root@lin1 ~]# more /etc/hosts
127.0.0.1 localhost.localdomain localhost
192.168.1.50 shiva
# Public Network - (eth0)
192.168.1.100 lin1
192.168.1.101 lin2
# Private Interconnect - (eth1)
192.168.1.100 lin1-priv <-----right here...should be 192.168.2.100
192.168.2.101 lin2-priv
# Public Virtual IP (VIP) - (eth0)
192.168.1.200 lin1-vip
192.168.1.201 lin2-vip
# Private Storage Network for Openfiler - (eth1)
192.168.1.195 openfiler
192.168.2.195 openfiler-priv
Thank you so much for your assistance thus far. I'm already on to the next problem. These RAC installations are new territory for me and are a real challenge. - thx, yomick

Silly me! Just expand the left side of iTunes!

I guess I'm a little slow, but I just couldn't imagine the purpose of playing video in that tiny window in the bottom left hand corner of iTunes. But duh! Simply stretch that Source List colum wider, and you get a bigger window for playing videos and seeing album art!
Amazing how you can work with something so long and miss a simple and easy feature!

Also you can click on the video to get it to play in its own window which you can enlarge. You can even right click on the video (in either window) and select full screen to play the video full screen (Quicktime Pro may be required for this feature).
Also just as a added extra if you want to change the picture that is dispayed when the video is not playing right click on the video and select 'Set Poster screen' (Or something every similar) (Again Quicktime pro may be required)
Hope this helps

Just downloaded the oracle database 10g release 2 (10.2.0.1.0)

Standard Edition for Microsoft Windows 32-bit...when loading the software it prompted me for a password, which i know that, but no USER ID...then when i go to run the 'Database Control - orcl' it is asking for a USER ID, but I have no idea what USER ID to use. Any thoughts????

user12106007 wrote:
Standard Edition for Microsoft Windows 32-bit...when loading the software it prompted me for a password, which i know that, but no USER ID...then when i go to run the 'Database Control - orcl' it is asking for a USER ID, but I have no idea what USER ID to use. Any thoughts????DId you read the Installation Guide?
The userid ("User Name") it is asking for in the database control would be one of the user accounts created in the database. Start with "SYSTEM", and the password you supplied when you created the database.

Fusion 4.1.2. After install can no longer print on the Mac side.

Version:1.0 StartHTML:0000000167 EndHTML:0000003793 StartFragment:0000000475 EndFragment:0000003777
Greetings,
I'm using a MacBook Pro running OSX SL at the most current level.
I upgraded from Fusion 3 to Fusion 4 (uninstalled 3 first then installed 4) after which I did the update to Fusion 4.1.2 which appeared to run fine.
Being I'm new to the Mac I installed Fusion because I need Windows-XP.
Prior to the installation of Fusion I spent 2 weeks trying to get my printers working just on the Mac side without Fusion. I'm using an HP Deskjet 5850 (5800 series) printer which worked just fine. The printer is an IP printer at IP address 192.168.1.11 and can be pinged from both the Mac side and the Windows-XP side. Before Fusion there wasn't any issue printing on the Mac side.
After Fusion installation I didn't have any issues printing on the Windows side.
Now with Fusion installed I can still print on the Windows side but not on the Mac side.
All settings are as normal with printer sharing.
When trying to print on the Mac side I see the printer queue for the HP pop up and it says 'waiting to connect' to 192.168.1.11.
I tried a dozen different settings non of which worked.
I switched from a NAT connection to a Bridged connection for Windows but still the same result, no printing from the Mac side.
Is there a problem with this release of fusion or is it somewhere in my system settings?
Any help will be appreciated.
Thanks

Run through this list of fixes including #16 then stop and report.
Step by Step to fix your Mac

How to install Soap on the (Apache) Oracle HTTP Server

Hi,
Does anyone know how to install SOAP on the Oracle HTTP Server? I downloaded a soap version (it seems that the standard version comes without SOAP) from the xml.apache.org site and followed the installation instructions as far as I could (only Tomcat is described). However, no 'soaping'!!! Maybe I'm overlooking something because I cannot imagine that it should be difficult.
Thanks in advance!
Hans

Hans, the SOAP implementation is part of OC4J. You get it out of the box. Check out how to use the out-of-the-box implementation in the tutorials on Web services with Oracle9i JDeveloper at:
http://otn.oracle.com/tech/webservices/htdocs/series/content.html
These tutorials/samples use the implementation of SOAP/WSDL that Oracle calls J2EE Web Services and this is the long term direction of Oracle's Web services implementation. This implementation is what Oracle will be evolving to Sun's Java Web Services Developer Pack as it finalizes into J2EE 1.4.
If you want to use Oracle/Apache SOAP, this too is included in OC4J but its support is being deprecated in future releases of Oracle9iAS in favour of the J2EE Web Services implementation. To find it, check out the OC4J/soap/webapps/ directory for the soap.ear file (it is in a slightly different spot if you are using the full Oracle9iAS R2 but still within the soap directory structure. Simply add <application name="soap" path="../../../soap/webapps/soap.ear" auto-start="true"/> to your OC4J server.xml and <web-app application="soap" name="soap" root="/soap" /> to your OC4J http-web-site.xml, re-start and away you go.
Finally, just to be sure, SOAP support in Oracle9iAS did not appear until 1.0.2.2.x and higher. If using 1.0.2.1 or less, you are correct, there is no SOAP support.
Mike.
Most folks that try out the J2EE Web Services find it is pretty easy to use so

DRDA is installed just on the Oracle side?

Similar Messages

Maybe you are looking for