Dreadfully slow when trying to mousedrag an image

Hi.
I just switched to Keynote '09 and am trying to edit a very simple, one slide diagram that I created in Keynote '08. Whereas moving a single image around in '08 is seamless, moving the same image in the '09 version of the files is PAINFULLY slow, to the point where the program is utterly unusable.
I have tested and '08 version and an '09 version one after the other and the problem consistently exists for 09 but never for 08.
Is anyone else having similar issues? Is there a fix? I have a brand mnew MBP with 4Gb of RAM and the top of the line video card.

Hi, your hint does improve the speed for me only about 20 %: still my iMac is practically dead, when:
- touching a slide with a diagram
- saving any keynote file which has a diagram
- moving around in the slides, if only one slide has a diagram
The problem is either:
- the processor load is 2 times 100 % for a couple of minutes
- the input and output of the harddrive is maximum both at the same time
- processor load is near to zero, harddrive activity is zero, but the iMac still is temporarily frozen (even the clock stops) for 1 minute or 2.
Recreating the diagrams does not help. The tendency of this behaviour was also there with the last updates of keynote 08. The workaround was, to just reduce the size of the diagram to fit right in the middle of the slide.
This phänomenon is a real problem for my work, I have spent lot of time to find a workaround.
regards,
Ulrich

Similar Messages

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

I am getting a error IO when trying to upload multiple images within wordpress using the flash uploader. I do not get the error when uploading using explorer. The error only appears if I try uploading using firefox....any ideas?

Logged the call with SAP who directed me to 'Define settings for attachments' in IMG and setting the 'Deactivate Java Applet' & 'Deactivate Attachment versioning' checkboxes - problem solved.

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

When trying to open an image from LR4 in Photoshop CS5 I get a message asking me to download Camera

When trying to open an image from LR4 in Photoshop CS5 I get a message asking me to download Camera Raw 7.0. This is not on the Adobe web site. When will it be available?

<moved from Adobe Creative Cloud to Bridge General Discussion>

Photoshop Crop won't complete when trying to crop an image.

Photoshop Crop won't complete when trying to crop an image. This just started a couple of days ago and I can't figure out what's going on with it. This happens in Photoshop CS6 and CC, Anyone have a clue what I need to do?

Here is doc. on various cropping options. http://helpx.adobe.com/photoshop/kb/advanced-cropping-resizing-resampling-photoshop.html
Note that if you change resolution and you resample image you basically have to rebuild all the pixels. But seems like it should take just a few seconds. Are you asking it to do something that is not possible with image? Like a height of 500 inches rather than 500 pixels?

My Apple TV 2 is slow when trying to move through different menu selections. It is like a slow computer trying to catch up to mouse clicks. It eventually remembers the buttons that were pushed on the remote, but it freezes and takes a minute to catch up.

My Apple TV 2 is slow when trying to move through different menu selections. It is like a slow computer trying to catch up to mouse clicks. It eventually remembers the buttons that were pushed on the remote, but it freezes and takes a minute to catch up.

I had something similar a couple of week ago, it would scroll then stop, scroll then stop.
At some point the porblem went away.
Try unpowering and restarting your AppleTV. Rsetart iTunes too.

When trying to crop an image in Lightroom Develop I get a blue overlay screen and cannot see image

When trying to crop an image in Lightroom Develop I get a blue overlay screen and cannot see image. I have uninstalled and reinstalled but same result. How can I get this reset to show selected image and crop handles?

That has fixed it, all working fine now, thanks.

Acrobat 9 very slow when trying to print

Need to know if anybody has a solution to my printing problem. We just bought and installed Acrobat 9. When trying to print a file in the program, it takes a very long time for the file to be spooled to the printer. Of course a multi page document is even worse. We are printing to a printer that is networked, it's a Canon high speed printer with a PCL driver. We have tried a PostScript driver as well. I have tried changing the resolution to 300dpi and not print as an image. We can transfer the file to a PC with just a reader, and it spools much faster to the same printer.
Are we missing a setting somewhere? Any suggestions would be much appreciated.

Hi Jacob. So, let me get this straight...
You have a file.pdf open in Acrobat 9.0
You go to File > Print and choose your networked Canon Printer.
That's the one that spools slow???
Then you say... you take the very same file.pdf and open it in Reader (to a different PC) go to File > Print to the very same networked Canon printer and it spools fast?
How about gettiing the free Adobe Reader on the PC that spools slow, open your file.pdf in Reader and print that to the networked printer to compare spooling speeds? That would be a true comparison to see if it's just Acrobat or the PC.
J.R.

Why does FF4 start to download an image once more which is already on screen when trying to save this image?

I look at a picture from a photo-site - size 11 MB. I decide to save this picture > right click > save image as.. The download window opens and FF downloads the picture once more which is already somewhere in FF's cache or memory.. I can see that data comes from the internet and not from a local place on my computer and the process can be rather slow, when the remote server is slow.. I find this as a waste of bandwidth.. Is it possible to avoid this behaviour?

You can look at this extension:
*Save Images: https://addons.mozilla.org/firefox/addon/3404

Error when trying to save still image from video with Quicktime Pro

I just purchased Quicktime Pro so that I can use it with my new Nano (the one that shoots video). I want to grab a frame from the video and create a still image (in jpeg format). I should be able to do it, but when I try, I get an error 11005 (or something like that). Anyone know any way to fix this? Thanks!

I also tried the alt/ctrl/shift buttons when clicking Editor in the Photoshop welcome screen. It did ask if I wanted to reset the preferences. I chose yes. I still get the same error message when trying to save for web.
Below....showing I don't have a "save for web" folder on my C drive.
And below, showing the same error after pressing alt/shift/ctrl when clicking on editor and clearing the preferences.
I don't have a 'Save for Web' folder anywhere on my C: drive. I searched and came up with no folder with the text "save for web" in it.
I did find a "save for web" folder on my D: drive and deleted that.. but now when I start up Photoshop, the option for Save for Web is grayed out...not able to select it.

I/O device error when trying to backup system image (any advice? please!)

Having posted this once with absolutely no response, I'll try again.
When trying to backup my K330B system image, I get "device error encountered with either the source or the destination (0x8078012D)" and "Additional information: The request could not be performed because of an I/O device error. (0x8007045D)" It recommends chkdsk/r on both the source and destination devices. I did this for C: and for the external drive I'm backing up to. No problems are found.
I also found the Lenovo Hard Drive Quick Test on the support site. It does not list K330B as one of the devices it is designed for, but I tried it anyway. It reported an error on the read test and two other tests that it performed when directed to test all partitions on the HDD.
Has anyone else had problems backup up the entire system image but no problems backing up just the C: partition?

Backing up system image using what program or component?
What brand hard drives? Most manufacturers have test utilities
for their drives, sometimes better at finding errors.
As HDQT you tried found some errors, you should test drives
more thoroughly as a first step.

IPhoto shows an exclamation mark inside a triangle when trying to view the image

When trying to access the photos, a triangle with an exclamation mark pops up and I am unable to drag or view the photo.
The triangle looks like this

That means, that iPhoto is unable to access the original image files. Either the original files are missing, or your iPhoto library is corrupted.
What happened, before this problem first occurred? Did you update or upgrade software? Run any cleaning application? Move your iPhoto library to a different location? has the size of your iPhoto Library changed? Is your iPhoto Library still large enough to hold all the photos? Which version of iPhoto and MacOS X do you have?
Before you try anything else, make a backup copy of your iPhoto library, but don't overwrite any recent backup you currently have.
After you made the backup copy, try if the iPhoto Library First Aid Tools can reestablish the connection between the thumbnails. To run the First Aid Tools, hold down the key combination alt/options and command while launching iPhoto. Keep holding down the keys, until you are seeing the First Aid panel. Then select "Rebuild Database" from the panel.
If that does not help, try "Repair permissions" as well. Then post back with more details.

Nothing happens when trying to import an image

When trying to import images, after choosing an image from my SD, PS Touch just does nothing. No error message, nothing.
This also happens with quite small images, and "max Import Size" is set to max.
(Galaxy Nexus, Android 4.3)

When trying to import images, after choosing an image from my SD, PS Touch just does nothing. No error message, nothing.
This also happens with quite small images, and "max Import Size" is set to max.
(Galaxy Nexus, Android 4.3)

Since latest update, Safari unresponsive when trying to view different images when online shopping,

Since latest software update on my iPad 3, Safari is unresponsive when trying to zoom or open other images, when online shopping.

Tap Settings > Safari
Tap to clear History, Cookies, and Data.
Then reset the iPad.
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset.

Error when trying to upload an image

Hi!
I'm trying to upload an image to my container name "vhds" inside storage account "pruebasatfacr" but I'm getting the following error:
[root@vmlbcatfl49 KVM]# azure storage blob upload -a pruebasatfacr -k "$base64string" --container vhds
info:
Executing command storage blob upload
File name: azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh
+ Checking blob azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh in container vhds
error:
getaddrinfo ENOTFOUND
info:
Error information has been recorded to azure.err
error:
storage blob upload command failed
[root@vmlbcatfl49 KVM]# cat azure.err
Fri Jan 02 2015 09:07:47 GMT+0100 (CET):
{ [Error: getaddrinfo ENOTFOUND]
stack: [Getter/Setter],
code: 'ENOTFOUND',
errno: 'ENOTFOUND',
syscall: 'getaddrinfo',
__frame:
{ name: '__1',
line: 270,
file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
prev:
{ name: 'StorageUtil_performStorageOperation__1',
line: 251,
file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
prev: [Object],
active: false,
      offset: 19,
col: 4 },
active: false,
offset: 2,
col: 15 },
rawStack: [Getter] }
Error: getaddrinfo ENOTFOUND
at errnoException (dns.js:37:11)
at Object.onanswer [as oncomplete] (dns.js:124:16)
at __1 (/usr/lib/node_modules/azure-cli/lib/util/storage.util._js:272:15)
at StorageUtil_performStorageOperation__1 (/usr/lib/node_modules/azure-cli/l
at uploadAzureBlob (/usr/lib/node_modules/azure-cli/lib/commands/asm/storage
I guess that can be a DNS
issue but I need more information about that, does anyone
know why can it be caused?
Thanks in advance!

Hi again and thanks for your response!
I have a VM with Azure CLI tool running with RHEL 6.5, so that I think i can't use AzCopy only compatible for Windows O.S.
The file that I want to upload is located on Azure CLI server and I execute de following command:
[root@vmlbcatfl49 KVM]# azure storage blob upload -a pruebasatfacr -k "$base64string" --container vhds
info:
Executing command storage blob upload
File name: azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh
+ Checking blob azure-POSTGRES-9.3.2-RHEL-65.X64.ATF.PRB-disk1.vdh in container vhds
error:
getaddrinfo ENOTFOUND
info:
Error information has been recorded to azure.err
error:
storage blob upload command failed
Further info related to this error:
[root@vmlbcatfl49 KVM]# cat azure.err
Fri Jan 02 2015 09:07:47 GMT+0100 (CET):
{ [Error: getaddrinfo ENOTFOUND]
stack: [Getter/Setter],
code: 'ENOTFOUND',
errno: 'ENOTFOUND',
syscall: 'getaddrinfo',
__frame:
{ name: '__1',
line: 270,
file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
prev:
{ name: 'StorageUtil_performStorageOperation__1',
line: 251,
file: '/usr/lib/node_modules/azure-cli/lib/util/storage.util._js',
prev: [Object],
active: false,
      offset: 19,
col: 4 },
active: false,
offset: 2,
col: 15 },
rawStack: [Getter] }
Error: getaddrinfo ENOTFOUND
at errnoException (dns.js:37:11)
at Object.onanswer [as oncomplete] (dns.js:124:16)
at __1 (/usr/lib/node_modules/azure-cli/lib/util/storage.util._js:272:15)
at StorageUtil_performStorageOperation__1 (/usr/lib/node_modules/azure-cli/l
at uploadAzureBlob (/usr/lib/node_modules/azure-cli/lib/commands/asm/storage
Is it possible to continue exploring this option with the CLI tool to upload the file (.vhd)?

Dreadfully slow when trying to mousedrag an image

Similar Messages

Maybe you are looking for