Dreamwaver and Jump Servers

I use Dreamweaver CS6 on a Windows machine to develop and manage 20,000  web pages and their content. Using VPN, I access my remote / testing Linux servers with Dreamweaver, directly. In a recent development, our security folks no longer allow direct VPN access from my Windows machine to my remote / testing boxes and I am now required to use a shared Linux jump server as an ‘intermediary’ to access the web servers.  This has negated my use of Dreamweaver as a content management tool for my large sites.  Is there a way to configure connection, via Dreamweaver, to my remote and testing servers when a jump server is required?

Hello,
It could be  stuck key. (or keys)
You can try cleaning the keys, here is how you can do that.
http://mij.oltrelinux.com/ibook/cleaning_keyboard/
Pop the caps off and clean around them.
If that doesn't work then you may require a new keyboard.
Here is how to remove and replace an iBook keyboard.
http://www.ifixit.com/Guide/Replacing+iBook+G4+12-Inch+800+MHz-1.2+GHz+Keyboard/ 155/1
Should it require a new keyboard, they can be replaced very cheaply.
Remember to get the right one for your iBook (i.e 14" or 12" models differ)

Similar Messages

  • Move and redeploy application- and web-servers for Planing?

    Hi, all!
    Have Hyperion Planing ability to move application- and web-servers from unix-machine to another win-machine and after redeploy existing unix-installed planing on it?

    They are actually for for 2 different things. The Sun WAS is for enterprise applications, EJBs and the like.
    Tomcat is for simpler Servlet/JSP hosting.
    The Sun WAS actually uses the Tomcat server as its Servlet/JSP engine then adds EJBs on top.

  • How can I stop redirect and jumping when clicking on a link in Google search or on a web page?

    When I click on a link in Google (or other) search, or a button within a page, too often, at least half the time my request is REDIRECTED and JUMPS to another unwanted page!
    == This happened ==
    Every time Firefox opened
    == after attempting to clean the computer a few times

    Thank you, Weather15.
    I have cleaned my computer a few times since first noticing it, both with Spybot - Search & Destroy and CCleaner. Also have
    the latest version of AVG 9.0 Free checking for problems as I search.
    I am about to clean again though to see if it makes a difference.
    Had to do some updating a few days ago and haven't cleaned since then. Thanks again. Will let you know if this handles it!

  • How to use the same services-config for the local and remote servers.

    My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
    <?xml version="1.0" encoding="UTF-8"?>
    <services-config>
        <services>
            <service id="amfphp-flashremoting-service"
                class="flex.messaging.services.RemotingService"
                messageTypes="flex.messaging.messages.RemotingMessage">
                <destination id="amfphp">
                    <channels>
                        <channel ref="my-amfphp"/>
                    </channels>
                    <properties>
                        <source>*</source>
                    </properties>
                </destination>
            </service>
        </services>
        <channels>
        <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
        </channel-definition>
        </channels>
    </services-config>
    I think the problem  is the line
            <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    but I'm not sure how to use the same services-config for the local and remote servers.

    paul.williams wrote:
    You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
    The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
    Hi Paul,
    In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
    -services=path/to/services-config.xml
    IF
    services-config.xml
    have tokens in it and user have not specified additional
    -context-root
    and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
    Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
    for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
    -services=path/to/services-config.xml
    have been specified durring compilation.
    I dont know any better way to exmplain this, but in summary there is two places that you can tell swf  about service confogiration,
    1) pass -services=path/to/services-config.xml  parameter to compiler this way you tell swf file up front about all that good stuff,
    or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

  • Audio and video sticking and jumping after installing windows 8.1

    Hello, 
    I have a HP Pavilion G6 - 2292sa
    The product no is C1Y93EA#ABU
    I have recently upgraded my system from windows 8 to the windows 8.1 update. Since I updated my audio won't work properly at all. During random intervals when playing songs on itunes the song will jump and stick for a few seconds then continue playing with random jumps like this throught all the songs. When I watch a music video on youtube the audio does the same thing as it does in itunes as well as the video sticking and jumping. I have tried an audio fix I saw on the HP forums that suggested I delete the hd audio driver, hard reset then reinstall them but this didn't have any affect what so ever. This is a huge problem since I can't watch netflix, listen to songs or pretty much do anything media related. 
    Any help you could give would be really apreciated. 

    Hi Greum,
    Welcome to the HP Forums!
    I would like to take a moment and thank you for using the forum, it is a great place to find answers. For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I see that after updating to Windows 8.1 your audio and video sticks or jumps and you have been  unable to resolve it. You have tried uninstalling and reinstalling the audio driver to no avail.
    I suggest you run The HP Support Assistant to look for updates and help resolve issues.  You also have a built in troubleshooter in Windows 8 and 8.1.
    Press the Windows key +C to open charms
    Type troubleshoot audio/video and press enter
    Follow the on screen prompts.
    If these steps have failed to resolve the issue, I suggest you do a recovery back to factory and then retry the update.
    Performing an HP System Recovery (Windows 8). You will see an option to backup your personal files during this process, if you have not done one yet, I suggest you do one now, to prevent any data loss. Restoring Files that were Backed Up Using HP Recovery Manager (Windows 8)
    Here is a link to a document to assist you with  updating.Updating Windows 8 to 8.1.  Please let me know the outcome.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • Issue with VPN configuration in Windows 2008 r2 and 2012 Servers.

    Hello ,
    I hope you can help me to fix this issue, it's been 5 days since I a, trying to configure VPN in your 2008 and 2012 Servers. On both platform  (2008 and 2012) I am getting same error while configuring VPN (after role installation). 
    "Unable to load C:\Windows\System32\iprtrmgr.dll". So, I have removed IPv 6 entry from the registry and now able to start server (not sure what configuration it took automatically).  I tried to disable "Routing
    and Remote Access" service and got the same error while enabling "Routing and Remote Access" is running but VPN is still not functioning properly). 
    I am getting following error,
    ================================================
    Errors under the Event viewer (Remote access)
    1) --->>    CoId={DF744409-02D7-4FF4-AD24-504F0C83E1AB}: The user 10.0.0.1\chetan connected from 10.0.0.1 but failed an authentication attempt due to the following reason: The remote connection was denied because the user name and password
    combination you provided is not recognized, or the selected authentication protocol is not permitted on the remote access server.
    2) ----->>   CoId={DF744409-02D7-4FF4-AD24-504F0C83E1AB}: The user connected to port VPN3-127 has been disconnected because the authentication process did not complete within the required amount of time.
    Errors under the Event viewer (Remote access)
    3) ---->>  Network Policy Server denied access to a user.
    Contact the Network Policy Server administrator for more information.
    ================================================
    I am using (MS-CHAP v2) + EAP (Authentication Method).  Please let me know if you need any additional information. 
    Thank you,

    I Guess this thread is not related to SQL Server .User is facing issue because of network or may be due to OS.I guess I will move this into windows forum.
    Moderators please move to Network forum
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • How do I get my Iphone 4S screen to stop flickering and jumping?

    My 15 month old Iphone 4S's screen has recently starting jumping and flickering and will not stop.
    First began in my camera but would stop when I turned the camera to the front to see my face, then when switched back to the other side it would begin jumping again, (roughly a month ago). Then it started happening in any apps that involved my camera, snapchat, instagram, etc. today.
    Now, my screen always flickers and jumps in all apps and when on my home and lock screen.
    IOS is up to date.
    No cracks on screen.
    Continues to do so even after resetting and restoring iphone, and changing my brightness up and down.
    Background moving is turned off.
    Flickering is worse at the bottom of the screen.
    Screen was replaced six months ago.

    Sorry I can't help but I literally just posted the exact same thing on this website my 4s screen on camera flickers and jumps and in snapchat and slo pro ( slo motion camera ) will this turn to the home screen aswell I've already had a problem with the screen once !!

  • TS1424 I downloaded a song that stops at 1:04 and jumps to the next song, as if it's over.  This song was in the middle of several songs, but this is the only one that is incomplete.  Can I download this song again for free, or do I have to purchase again

    I downloaded a song that stops at 1:04 and jumps to the next song, as if it's over.  This song was in the middle of several songs, but this is the only one that is incomplete.  Can I download this song again for free, or do I have to purchase again?

    If you live in a Region that allows re-downloading Music...
    Delete the Song(s) and re-download...
    See Here  >  Download Past Purchases
    http://support.apple.com/kb/HT2519
    If not... Contact iTunes Customer Service
    Apple  Support  iTunes Store  Contact Us

  • Active Directory domain migration with Exchange 2010, System Center 2012 R2 and File Servers

    Greeting dear colleagues!
    I got a task to migrate existing Active Directory domain to a new froest and a brand new domain.
    I have a single domain with Forest/Domain level 2003 and two DC (2008 R2 and 2012 R2). My domain contains Exchange 2010 Organization, some System Center components (SCCM, SCOM, SCSM) and File Servers with mapped "My Documents" user folders. Domain
    has about 1500 users/computers.
    How do u think, is it realy possible to migrate such a domain to a new one with minimum downtime and user interruption? Maybe someone has already done something like that before? Please, write that here, i promise that i won't ask for instruction from you,
    maybe only some small questions :)
    Now I'm studying ADMT manual for sure.
    Thanks in advance, 
    Dmitriy Titov
    С уважением, Дмитрий Титов

    Hi Dmitriy,
    I got a task to migrate existing Active Directory domain to a new froest and a brand new domain.
    How do u think, is it realy possible to migrate such a domain to a new one with minimum downtime and user interruption?
    As far as I know, during inter-forest migration, user and group objects are cloned rather than migrated, which means they can still access resources in the source forest, they can even access resources after the migration is completed. You can ask users
    to switch domain as soon as the new domain is ready.
    Therefore, there shouldn’t be a huge downtime/interruption.
    More information for you:
    ADMT Guide: Migrating and Restructuring Active Directory Domains
    https://technet.microsoft.com/en-us/library/cc974332(v=ws.10).aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]

  • Upgrade process for SQL server 2005 service pack4 on stand alone and cluster servers

    Hi All,
    We have iniated a process of upgarding sp4 for all sql 2005 stand alone and clusters servers.
    Please provide me the step by step process for installing sp4 and roll back paln for sql 2005 servers.And before proceeding with sp installation what are the pre check/pro active things that we need to take care.
    Maheshwar Reddy

    Hello,
    For applying SP to SQL 2005 cluster environment/standalone please refer to below link
    http://www.sqlcoffee.com/Tips0007.htm
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • Slow transfer speed between existing servers and new servers

    I have an issue with copying files to a new HP physical server with Esxi 5.5 host and Windows 2012 Server from anywhere in our current network.  
    We have an older HP server with Esxi 3 and multiple Windows 2003 vms, including a domain controller, file server and sql server (our current environment).   I installed a new HP DL380 Gen 8 server and installed Esxi 5 and two Windows 2012 servers,
    one is a DC and one is a file server (our future environment).  
    Currently the new 2012 DC a second domain controller; have not made it the first domain controller yet.   The 2012 file server is a member server.  Same network IP range, static, same subnet, same gw.
    When I try to copy files from our current environment – to either of the Windows 2012 servers it crawls, like 100kb/sec or less.   It is slow between 2003 and 2012 servers, either direction, and between my Windows 7 and the 2012 server.  Does
    not matter if I use windows to copy or robocopy.  It is very fast between the 2003 servers in the current environment and between my windows 7 and the current servers.  Downloads from the Internet do not seem slow.  I have done the following
    to try to resolve with no success:
    Some forums have suggested disabling Large Send offload on the nic card – usually Broadcom cards, ours are intel, but      I tried it anyway with no success.
    Some forums suggested turning off digital signing in group policy, no success.
        Some forums suggest SMB2 can be a culprit, I disabled it on the 2012 server with no change in speed.  
    I made sure all the updates are complete on the new 2012 file server.
    Turned the server firewall off to be sure it wasn’t blocking something; no antivirus installed yet.
    I contacted Vmware to make sure the virtual switch and nics were set up correctly on Esxi 5, they said they are.
    I checked the physical Cisco switch settings to make sure it looked fine.   The current and future physical servers were      all connected to the same physical switch.
    I switched out the network cable
    I moved the network cable to a different switch.
       I checked to be sure DNS was set up correctly.
       I checked firewall settings on the Esxi 5.5.
       Current HP Service pack is installed on the Gen 8 Server.
    I am running out ideas.   Any suggestions?

    Hi,
    Would you like to adjust to RSS, NetDMA and TCP Offload?
    http://blogs.technet.com/b/networking/archive/2008/11/14/the-effect-of-tcp-chimney-offload-on-viewing-network-traffic.aspx
    Hope this helps.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • Advantages of using a webserver inbetween a load balancer and application servers

    I am building out a new weblogic domain.
    I am wondering which one of these configuration to go with:
    1. Load balancer > weblogic servers
    2. Load balancer > web server > weblogic servers
    Could someone tell me what are the specific advantages of having web servers inbetween a load balancer and application servers (besides caching static data content and acting as a proxy)?
    Thanks in advance
    Srini

    Other than hosting the static content, nothing much really.   We have our load balancer go straight to WL for applications without static content and route to web server if there is static content.   Easy enough to do it both ways, best of both worlds.

  • On my ipod touch my songs start in random places and jump to different places as it plays, the remember position is not ticked can anyone please help?

    On my ipod touch my songs start in random places and jump to different places as it plays, the remember position is not ticked can anyone please help?

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    Finally, if the Restore doesn't work, let the battery drain completely.  Then recharge for at least an hour and Restore again.

  • IDE's and webservers and application servers

    can anyone please tell me what exactly are the IDE's,webservers and application servers in java
    1.eclipse
    2.IDEA
    3.JDeveloper???
    jboss
    jbuilder..

    PubeHow much thrust does the Pube produce?no idea. it's not really about the power, it's a nice green eco-car, 100% recycled. it's made from old corsairs*
    *old coarse hairs boom boom                                                                                                                                                                                                                                                                                                                                                                                                       

  • Mouse stuck and jump

    I have a Mac Pro (2010) and I having an annoying problem with my mouse and my tablet. The pointer stuck and jump. Retouching photos is an nightmare with this problem. Does anybody know how to fix it.
    I disconeccted my tablet and the problem still there.
    I changed the mouse and nothing...
    Help please!....

    I dont see this happen on my system. If will be great if you can do the following test:
    - Close the timeline and then play the movie using Menu / Keyboard shortcuts? Both playback and stepping frames.
    That way we can know if it is a timeline or a stage issue.
    -Sujai

Maybe you are looking for