Dreamweaver 4 no longer working after downloading files created with MX

I downloaded files that were created with Dreamweaver MX to
my pc in order to update them for a new client. I've been using
Dreamweaver 4 and now I cannot even open Dreamweaver 4. Luckily I
also have Dreamweaver 8 installed and can view all the files in the
site from there, but what would have caused Version 4 to generate
errors upon trying to open? It starts to open and I can see that
the properties panel is disabled and then I get the error message:
"Dreamweaver has encountered a problem and needs to close. We
are sorry for the inconvenience." I've sent the error report to
MS...
Any thoughts other than to use Version 8 from now on? Since
I'm a designer, I do have quite a few client sites that I'd have to
reset the remote site info for...
Thanks.

a guess- you also downloaded the .mno design note files.
There should be a technote on this-
It talks about contribute 2, but it's same exact issue with
MX and newer
Dreamweaver 4 crashes on Contribute 2 sites
Issue
Dreamweaver 4 crashes whenever it connects to a site that has
recently been
accessed by Contribute 2.0, 2.01 (Windows) and Dreamweaver MX
2004.
Reason
Contribute 2 and Dreamweaver MX 2004 design notes on remote
server or local
site folder are not compatible with Dreamweaver 4.
Dreamweaver 4 tries to
read these files and crashes when it cannot.
steps to fix are next- link below.
Permanent Link:
http://www.adobe.com/go/tn_19048
or
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19048&sliceId=1
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

Similar Messages

Links in PDF no longer work after optimizing file

Hi,
I created a PDF file that is about 5.50 MB that needs to be reduced in size. This PDF file was orginally created in Microsoft Word
with a linkable Table of Contents and links inside the document to websites.
When I create a PDF from this Word file in Adobe Acrobat X Pro, the links work as they should. However, the file size is too big for reasons I won't get into.
I read that a trick to reducing the file size is to try have Adobe try to print the newly created PDF document (by going to file -> print -> and clicking 'OK,' even though my computer is not connected to a printer). After Adobe tries to print the entire document, I click 'save as,' and sure enough, it successfully reduces the file size from about 5.50 MB to about 3.80MB without losing any quality. That solved my problem of the file size, but for some bizarre reason, it created a new problem with the PDF document.
For some reason, after I shrink the PDF file size by printing the file, the linkable Table of Contents and the http links throughout the document no longer work in Adobe Reader or even in Adobe Acrobat X Pro, which created the PDF. The links in the PDF document still appear as links, but when the 'hand' hovers over them, it doesn't change to an arrow. And when you try to click them, nothing happens.
Why is this? Is there some setting in 'Print PDF document' that is causing the links to be disabled? How do I get the PDF links to work as they normally do?
I haven't changed any of the default settings in the PDF printer. When the print box pops up, I just click 'OK.' It then tries to print the entire PDF document and then when it is completed, I just save as. Not sure what it would then disable the links.
Thanks.
BTW, I have tried the optimizing feature to reduce the PDF file size, and it ruins the quality of this document. The print PDF file trick works like a charm except for it disabling the links. I'd like to figure out why it is doing this and that would solve the problem.

Actually on Mac two forms will transfer
URL written as http://www.jqSmith_anywhere.usa
mailto:[email protected]
and Only if you go through File Menu > Print> Pdf> Adobe PDF
or save document and Drop on The Acrobat application icon in the Dock. (doing this way though you have to wait possibly several minutes.)
And only only with acrobat X and XI.
The issue is when in Word you have higlighted a word, Pphrase or sentence the gone to Insert menu > URL the type in URL or Mailto. Then saved. This is a Minor issue that adode fixed if adobe desired to. It has taken adobe 15 years just fix so you could type in URL and mailto directly. It will likely tthem another 15 to get the other way fixed. They would rather Blame Microsoft and Apple. rather than hunker down and fix the problem. Thevisual part or vdeo is based on PDF standard Adobe re;ease to general Public whenactobat first came out anew features emerge. And The code for Making Links is identical in both the Windows version and the Mac version. a saved version of the PDF on Mac when opend by the PDF shows the links. If Opened in Apple's Pages just opened the links are there. If doing nothing to the pages file and its exported back to Word (or Excel if its an excel file) the made a PDF. all types of links will be hot. If the File from Pages, or exporte to any of the OpenOffice version and aDF is created the PDF works. So iApple is taken out of the equation. its squarely between MS and Adobe. And Adobe gets along with no one. They are arogant and an island to themselves, cooperating with no one.

My Spreadsheet App no longer works after downloading the new ios7 software update.

My spreadsheet app. on my iphone 5 ( that i had been using) is no longer working since the new ios7 update. So how can i solve this problem?

check whether the App is compatible with ios 7, contact the app developer, or wait for the app update.

Project no longer works after downloading AIR 3.4

My AIR project built using sdk 3.5.0.12683 was all working fine with AIR 3.3, but now I've downloaded 3.4 it won't load. The background AIR window opens and that's it.
Is there a way to reinstall AIR 3.3, while we try to find out what change in 3.4 is affecting our code.
Doug

Wrong, maybe everybody else is not just downloading and instaling AS IS, but rather downloading and saving these AIR Updates so if things do not go like planed they will be able to rectefy the problem! On the other hand if you would use Flex 4.0 onwards and still use the mx as I do then you would have maybe more likely not the problem you encounter right now with Flex 3.5, and as I do use Flex 4,0 with mx only and all my web or AIR Apps (96% with modules) are all working very well with AIR 3.4! regrds aktell2007

Wifi no longer working after downloading BT Fon ap...

I downloaded the new App, but as a result I was losing connection with my home Wifi network.
In the end I uninstalled the App because everytime I tried to surf I ended up on the BT Fon webpage (why?), but it appears to have done something with my Wifi because now I can't connect to my home network at all - it says it's connected but it doesn't load anything. If I switch off Wifi it will load using the mobile connection.
I have rebooted the phone a number of times, disconnected and reconnected the Wifi, and deleted my home network and reconnected it, but it still won't work.
I wish I'd never downloaded the App now!
From reading the reviews it appears this has happened to others as well. Can anyone give me any idea how to rectify this and get my Wifi back, other than a factory reset - I am not a happy bunny!

So the handset browser shows no web pages at all even if you go into bookmarks and select a page?
Have you tried a different browser like Skyfire?
You may have to bite the bullet and reset regardless if all else fails, use HTC Sync to get the important stuff saved.
I have been using the Fon app on the hero and never had any issues with it at all, I have found it to be a handy little app.
Raid

Modem no longer works after trying to connect with...

hi folks,
i tried connecting to the internet via dialup with my 3210 over a ca-42 cable. it didn´t find a modem, so i selected my built-in modem as the one to use. Now, however, whenever i try to dial in to my isp connection over my builtin modem (on my thinkpad t43), i get a dialog popup telling me there is some hardware error in the modem!
is this a known problem? any ideas what i can do? i´ve tried shutting down all the pc suite processes and reconnect, and i´ve disabled the pc suite processes from starting up automatically and then restarted, all to no avail.
i´d greatly appreciate any input! thank you.
allie
Solved!
Go to Solution.

fyi - i solved this by uninstalling and reinstalling my modem in device manager. perhaps all i needed to do was to clear the fields filled in with gobbeldygook by nokia's connectivity thing - not sure.

Md5 reborned hasher 0.9.0 no longer works after firefox update to version 20 ,redesigned download box doesn't give option

md5 reborned hasher which has worked previously no longer works after update to FF version 20 . the redesigned download box doesn't give the option to use the hasher.

If you use this add-on a lot, you might want to switch back to the old style download manager until the add-on's author can bring it up to date. This thread describes how to make the switch: [https://support.mozilla.org/en-US/questions/955204 Got new version, want to go back to previous download box, the new one has no history and doesn't show speed of download, how do I go back?]

Checking out Pdf files to Local draft Folder option no longer works after office 2013 installed.

Checking out Pdf files to Local draft Folder option no longer works after office 2013 installed.
Summary :
We are using SharePoint 2010 Ent edition and users were able to checkout Pdf files similar to local drafts folder like any other office file without any problem when they used office 2010.
i.e
Unfortunately ever since their machines upgraded with office 2013 recently , this functionality completely stopped working for PDF files. This has now become a big problem for the users when it comes to check out and replace PDF files.
All browser plugins required for this functionality (i.e SharePoint OpenDocuments Class ) are all available and active. All document libraries are configured to Checkout is required for editing files. Browser version
used at the moment is IE9 (32 bit) version with windows 7.
Can anyone please help with this issue and any help to get away with this problem is much appreciated.

Hi,
Based on your description, my understanding is that the PDF files cannot be checked out to local drafts folder after Office 2013 is installed.
Did this issue occur with Office files?
I recommend to check if the Office files can be checked out to local drafts folder with Office 2013.
And it is recommended to use Office 2010 with SharePoint 2010 for best practice.
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Application Manager no longer works after I got a new computer.

Application Manager no longer works after I got a new computer.
I moved all of my data from one mac to the other, but the Adobe Suite no longer works.
I tried to re-install it, but it says now that Application Manager is damaged, it keeps sending me to the download page, I download, it starts installing then it says it is damaged, and so on... Got any idea?
Thank you!

1)
Click on the Finder and look for the options listed next to Apple Icon located at the top left corner of the Desktop screen and click on "Go" menu button and select "Utilities" option.
(Applications>Utiliites)
Locate Adobe Creative Cloud and Adobe Application Manager folder under Utilities window and trash both folders.
2) Trash Adobe Creative Cloud from Applications well.
3)
Click on the below link and download & run Adobe Cleaner tool :
Select the option "Adobe Application Manager for Mac OS X 10.6" and then click on "Clean up Selected" .
https://helpx.adobe.com/content/help/en/creative-suite/kb/cs5-cleaner-tool-installation-pr oblems/_jcr_content/main-pars/accordion_container_1/accordion-par/accordion-item-1/accord i on-item-par/procedure/proc_par/step_3/step_par/download/file.res/AdobeCreativeCloudCleane r Tool.zip
4) Click on the below link and download Adobe Application Manager and install the same:
Once the installation process is completed , the installation box will disappear. Then open Application folder and locate Adobe application manager icon and double click on it .
It will start update process and gets updated to Creative Cloud .
http://download.adobe.com/pub/adobe/creativesuite/cc/mac/ApplicationManager9.0_all.dmg
Feel free to post , if you need further assistance

Canon iP2700 is no longer working after update

My Canon iP2700 is no longer working after doing an update yesterday. I am using the cnijfilter-ip2700series 3.30-2 from https://aur.archlinux.org/packages.php?ID=41797 with cups 1.5.2. I have blacklisted usblp, but this doesn't help. My printer is recognized, and apparently I can print but nothing happens. This is my error log:
tail -n 100 -f /var/log/cups/error_log
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_busses=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] usb_find_devices=0
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: +connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] [Job 4683] STATE: -connecting-to-device
D [09/Mar/2012:13:58:16 +0200] cupsdMarkDirty(-----S)
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Dirty files"
I [09/Mar/2012:13:58:16 +0200] [Job 4683] Waiting for printer to become available.
D [09/Mar/2012:13:58:16 +0200] cupsdAcceptClient: 16 from localhost (Domain)
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 POST / HTTP/1.1
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdAuthorize: No authentication data provided.
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 1.1 Get-Notifications 1
D [09/Mar/2012:13:58:16 +0200] Get-Notifications /
D [09/Mar/2012:13:58:16 +0200] cupsdIsAuthorized: requesting-user-name="irenke"
D [09/Mar/2012:13:58:16 +0200] Returning IPP successful-ok for Get-Notifications (/) from localhost
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
D [09/Mar/2012:13:58:16 +0200] cupsdReadClient: 16 WAITING Closing on EOF
D [09/Mar/2012:13:58:16 +0200] cupsdCloseClient: 16
D [09/Mar/2012:13:58:16 +0200] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
And this part keeps repeating every 5 seconds with different timestamp, until I delete the document from queue.
The CUPS ownership of the USB device file seems OK:
ls -l /dev/bus/usb/001/006
crw-rw---- 1 root lp 189, 5 Mar 9 14:17 /dev/bus/usb/001/006
I've been working on this problem since yesterday and now i'm stuck. Can someone please help?
EDIT
I think it's something related to the driver. If i change the driver to another printer model from CUPS the printer works. Prints garbage, but at least works. So this means that we have to wait for a new driver or what?
Last edited by otx (2012-03-09 14:21:27)

See if this is any help: https://bbs.archlinux.org/viewtopic.php?id=136415

My ImageClass MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. How can I resolve this?

My Image Class MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. I have checked with Cannon and they do not list my partricular machine among their driver updates. Is there another place to download a driver suitable for Mavericks?

Your MF4380dn is supported by the latest UFR2 v10.4.0 driver that supports 10.9. Here is a link from the Canon Australia web site,
http://support-au.canon.com.au/contents/AU/EN/0100491502.html
Before installing this driver, please remove the MF4380 from Printers & Scanners (unless you have already performed the reset that Carolyn mentions which will remove it for you). Then run the v10.4.0 installer and when it has completed, open Printers & Scanners and add the MF4380.

Epson printer driver no longer working after 10.4.11 update

It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
Does anyone know a workaround?
Thanks very much
Wolfgang

I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

Apogee Jam No longer working after 1.1 update?

My apogee jam is no longer working after updating to Garageband 1.1. I have an Ipad 2 with firmware 4.3.3.
Specifically what happens is:
1. I open the garageband app
2. I select the guitar amp
3. I plug the Jam chord into Ipad (guitar is already connected to cord)
4. Jam light goes green, blue, bright green then green
When Jam light goes bright green, the monitor button in garageband goes dim and doesn't work.
I've tried plugging my guitar in first, then starting garageband, no difference in results.
I have tried turning the monitor "on" prior to pluging in the jam, when I do this the monitor/sound gate window stays open until the Jam bright green goes on, then it disappears and the monitor button goes dim.
Outside the garageband app, the ipad does recognize the Jam in settings, general.
What's worse (for me...) is that I backed up the Ipad in itunes thinking that app data would also be backed up (as I read that in a description of backup). I then deleted garageband from the ipad and then restored it from itunes. Guess what, lost all my songs... Bummed out... Why wouldn't my songs be backed up???
Anyway, any ideas on the Jam issue would be greatly appreciated. I'm hoping I am just overlooking a setting?

Unfortunately, I don't believe that Apple keeps prior versions of Apps available at the store. GB was the first app I purchased there day one of my Ipad, incredibly worth the $, and I did actually look to see if you could go back legitimately.This is just one of the many reasons to JBreak your devices, so that you can go backward if you need to. This is a perfect example of why Apple should make prior versions available, but they think they know it all and never make mistakes, so that will never happen. Again, this is why folks take things into their own hands and why the scene exists. There are plenty of abuses, more than not IMO, but here is a perfect example of how people are screwed and can't use their Jams any longer without a JBroken device. They obviously know that this issue exists, they have employees on these forums. It will be months if ever they fix this issue, because the number of owners of Jam, although in the thousands, is small potatoes compared to the Apple owner universe. I believe it will only be fixed if Apogee is able to put enough pressure on Apple. If you see the Jam removed from the Apple store and GB site you know that Apple is choosing not to fix it, because they won't sell or promote it directly and then have to deal with complaints and returns. But even this will happen slowly...
Actually it occurs to me that Apogee may have to redesign the Jam AGAIN in order to get it working with 1.1 on Ipad 2 and Iphone 4s (devices with the newer processor). I wonder if they will recall or replace the Jams for people who now have Jams not compatible with Garageband. Again, Apple should be posting a warning for Jam owners on the Garageband download page, but that will never happen because Apple doesn't care about small potatoes.
Message was edited by: Rickd3333
Message was edited by: Rickd3333

My printer (HP Laserjet 2100) is no longer working after upgrading

My printer (HP Laserjet 2100) is no longer working after the upgrade; it just spits out page after page of error codes and blank pages. I've tried using both the HP driver and a generic driver. This is being accessed over a network. Has anyone encountered this problem after upgrading from Lion?

Hi,
Make sure to install the latest HP Printer Drivers 2.11 update as it should resolve a Postscript printing issue and I believe it will resolve the problem.
You may do so by clicking the Apple icon and then Software Update, you should see the update listed.
For any further issue go to Library\Printers and remove the HP folder, then download and install the following package:
http://support.apple.com/kb/DL907
Hope it helps,
Shlomi

Why wont assigned ringtones work after downloading the newest OS on iPhone 4

I have had ringtones assigned to my contacts and they no longer work after I updated my iPhone 4 to iOS 5. It plays the default ringtone Marimba rather than playing the ringtone file assigned. I've tried reassigning them and it doesn't work.

Deselect in iTunes, sync. When finished, select tones and sync again.

Dreamweaver 4 no longer working after downloading files created with MX

Similar Messages

Maybe you are looking for