Dreamweaver 8.0.1 gone buggy!

After months of smooth-sailing with DW8, I am suddenly having
three problems.
1) Whenever I close the program, I lose my FTP settings for
the several Web sites I am working on. I re-enter the codes every
day, the save box is checked, but information evaporates as soon as
I close down the program.
2) Most recently, when I try to "save" a web page I have made
a new change on, it does not save the file properly. Instead, a new
window opens up saying "Save as Template." The only way I can
effectively save a page I have made changes to is to do a "save as"
and then replace the existing file.
3) I have tried to download the updater to bring me to DW
8.0.2, but I am unable to do so. I am able to download the .exe
file, but when I try to open it, I get the following message:
"Contents cannot be unpacked. The executable you are attempting to
run has been corrupted." I have tried downloading new .exe files
several times, but none of them will open for me.
Can anyone advise me as to a possible CAUSE of these
problems? Previously this week I had more general problems with my
computer freezing, no matter what program I was running. But that
problem seems to have resolved when I replaced my mouse. Have
checked for virus and spyware, and have found none.
Apart from the cause, is there a SOLUTION for these problems?
Would deleting Dreamweaver from my computer, then using the CD to
re-install it be a sensible way to go??
Thanks. Phil in Boston

Phil,
If you have been having other problems with your PC freezing
etc, there may
well be other forces at work, not related to DW. Have you by
chance
installed Internet Explorer 7 lately?
If so, theres a technote on the Adobe site somewhere about
it, you need to
get that 8.02 update working IIRC. Tried to contact Adobe to
get ftp access
to the update? Tried to download it on another PC and
transfer it to your
dev. machine?
Brendon
"wirebird" <[email protected]> wrote in
message
news:[email protected]...
> After months of smooth-sailing with DW8, I am suddenly
having three
> problems.
>
> 1) Whenever I close the program, I lose my FTP settings
for the several
> Web
> sites I am working on. I re-enter the codes every day,
the save box is
> checked,
> but information evaporates as soon as I close down the
program.
>
> 2) Most recently, when I try to "save" a web page I have
made a new change
> on,
> it does not save the file properly. Instead, a new
window opens up saying
> "Save as Template." The only way I can effectively save
a page I have made
> changes to is to do a "save as" and then replace the
existing file.
>
> 3) I have tried to download the updater to bring me to
DW 8.0.2, but I am
> unable to do so. I am able to download the .exe file,
but when I try to
> open
> it, I get the following message: "Contents cannot be
unpacked. The
> executable
> you are attempting to run has been corrupted." I have
tried downloading
> new
> .exe files several times, but none of them will open for
me.
>
> Can anyone advise me as to a possible CAUSE of these
problems?
> Previously
> this week I had more general problems with my computer
freezing, no matter
> what
> program I was running. But that problem seems to have
resolved when I
> replaced
> my mouse. Have checked for virus and spyware, and have
found none.
>
> Apart from the cause, is there a SOLUTION for these
problems? Would
> deleting
> Dreamweaver from my computer, then using the CD to
re-install it be a
> sensible
> way to go??
>
> Thanks. Phil in Boston
>

Similar Messages

  • Dreamweaver CS4 slideshow option gone?

    Hello.
    Am I right that Dreamweaver no longer has a slideshow option?  That is, the slideshows that were possible in CS3 are no longer available?
    I just want something simple- no thumbnails, no controls- just a repeating, fading slideshow, so the ones in Fireworks are also unsuitable.
    Does anyone have any suggestions that don't involve using code as to how I should put a flash slideshow on my webpage?
    Cheers,
    Sarah

    I agree with Sarah. I to would like to have several images on my home page fade from one to the other without controls etc. I saw a tutorial for CS3 which seemed to make this a very simple process but with my CS4 this seems now more complicated. I've managed to install phatfusion slideshow - not sure if this will be of any use as I've not had a chance to tinker about with it - feel free to point me in the right direction if you have used this. Where do I find this Bridge Output on Dreamweaver or how do I get it if it is not installed.
    Cheers

  • Right-click gone buggy?

    When I right-click on a link, it sometimes gives me the wrong dialogue box; other times, 'open in new tab' will open a recently closed tab instead of the one I click. I also have to double right-click at times. What's causing this?

    When i tap with 2 fingers, it triggers the primary click altough the settings aren't configured like that... really annoying...

  • IMac gone buggy

    Freezing every few minutes, crashing every 15-45 minutes. Never run any Windows OS on it, neither in Boot Camp or Parallels Desktop nor VMware Fusion. Canb't even scan for malware with iAntivirus; it crashes before the scan completes.
    What's going on and what are my options?

    HI,
    There aren't any Mac viruses so you can rule that out.
    Make sure your system software is up to date. Click your Apple Menu / Software Updates. If everything is up to date ...
    Boot from your install disc, run Disk Utility to Verify and if necessary, Repair any errors on the startup disk.
    Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu and launch Disk Utility.
    (In Mac OS X 10.4 or later, you must select your language first from the installer menu)
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your start up disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. *Make sure there is always 10% to 15% free disk space*

  • Dreamweaver error on inserting an XSLT repeat region

    I am getting a Dreamweaver JavaScript error message when
    attempting to insert an XSLT Repeat Region under certain
    circumstances in Dreamweaver 8.0.2 for Windows. I have posted a
    full description on
    David
    Powers's friends of ED forum, but I wanted to report it here as
    well for confirmation.
    When creating a Repeat Region in an XSLT fragment, the
    following error message appears:
    While executing objetTag in XSLT_ForEach.htm, the following
    JavaScript error(s) occurred: At line 502 of the file "C:\Program
    Files\Macromedia\Dreamweaver
    8\Configuration\Objects\Server\serverObjectsCommon.js": Type Error:
    dwscripts.getBalancedSelection is not a function
    This error is entirely reproducible,
    but not if any PHP file has been open at any point since the
    XSLT fragment was opened.
    To illustrate:
    0) If Dreamweaver is running, exit completely.
    1) Start Dreamweaver.
    2) Create a new XSLT fragment, or open an existing one.
    3) In design view, place a field from an XML source into your
    fragment, select it, and then try to create an XSLT repeat region.
    The error message described above appears. Dismiss the error
    dialog, but keep the XSLT fragment document open.
    4) Create a new PHP document (or open an existing one), then
    close it.
    5) Back in your XSLT fragment, try again to create the repeat
    region. Now it works.
    If you open the PHP document
    before creating the XSLT fragment, you still get the error
    -- even if you leave the PHP document open. If you open the PHP
    document
    after you open the XSLT fragment, you do not get the error
    -- even if you close the PHP document before you create the XSLT
    repeat region.
    It looks like
    the key is to touch a PHP document at some point
    after the XSLT fragment is opened. So that is the
    workaround. My guess is that one of the included internal
    JavaScript scripts is not being sourced until a PHP document is
    opened, but this is probably not intended behavior.
    -jon

    quote:
    Originally posted by:
    Newsgroup User David Powers
    The only way that I know of is to disable all extensions,
    make sure that
    Dreamweaver is working correctly, and then enable extensions
    one by one
    until the error occurs again. You have then found the guilty
    party. You
    could also try it the other way round - disabling extensions
    one by one
    until it works OK. If you have recently installed a new
    extension, that
    may be the one to test first.
    Another thing you can try is this:
    You can try this to see if it solves your problem:
    Close Dreamweaver.
    Find C:\Documents and Settings\<username>\Application
    Data\Macromedia\Dreamweaver
    8\Configuration\WinFileCache-*.dat
    Delete the file (it's in a hidden folder, so you need to have
    enabled
    the option to see hidden files and folders).
    Restart DW. See if your problem has gone away.
    Thanks, David.
    Actually, what I was looking for was a way to trace what
    Dreamweaver is doing behind the scenes -- what scripts it is
    loading, and what errors those scripts throw. I had already tried
    uninstalling all my extensions and deleting my entire user
    configuration directory (not just the WinFileCache file), to no
    avail. I also tried running the "Repair" program from the Studio
    installation, but the problem persisted.
    So I resorted to uninstalling and reinstalling Dreamweaver
    from scratch from the original Studio 8 CD.
    Amazingly, even before I applied the 8.0.2 (or 8.0.1) update or
    installed any hotfixes or extensions, the same error message
    appeared.
    Before reinstalling, I took care to delete my user
    configuration directory (actually, I deleted the entire
    C:\Documents and Settings\{Username}\Application
    Settings\Macromedia\Dreamweaver 8/ tree. I took care to
    uninstall Dreamweaver 8 completely using the uninstall program, and
    I confirmed that the
    C:\Program Files\Macromedia\Dreamweaver 8\ directory was
    gone before reinstalling. In the outside chance that there was a
    problem with my install CD itself, I even tried installing twice --
    once from the install-image Studio 8 CD I downloaded from the
    Macromedia Store after upgrading from MX 2004, and once from the
    official Studio 8 CD I ordered by mail afterwards.
    So it's not my installation, it's not the hotfix, and it's
    not any of the extensions I've installed. It's a bona-fide bug.
    (What I can't figure out is why David was not able to reproduce
    it.)
    Next?
    -jon

  • Spinning wheel of death suddenly in safari 7.1.3

    Hi my Safari suddenly started spinning wheel of death today. It was fine this morning, but suddenly mid morning started with the spinning wheel of death. The only thing that happened was I had a pop up with some virus protection and a number to call. I couldn't get the pop up to go, so I force quit safari. Not sure if this is anything to do with it. (iTunes also gone buggy)
    I restarted safari and mac, but problems still there. I downloaded etrecheck and attached is the report
    Problem description:
    spinning wheel suddenly in safari
    EtreCheck version: 2.1.8 (121)
    Report generated 18 March 2015 16:58:57 GMT
    Download EtreCheck from http://etresoft.com/etrecheck
    Click the [Click for support] links for help with non-Apple products.
    Click the [Click for details] links for more information about that line.
    Hardware Information: ℹ️
        iMac (21.5-inch, Mid 2010) (Technical Specifications)
        iMac - model: iMac11,2
        1 3.2 GHz Intel Core i3 CPU: 2-core
        4 GB RAM Upgradeable
            BANK 0/DIMM0
                Empty  
            BANK 1/DIMM0
                Empty  
            BANK 0/DIMM1
                2 GB DDR3 1333 MHz ok
            BANK 1/DIMM1
                2 GB DDR3 1333 MHz ok
        Bluetooth: Old - Handoff/Airdrop2 not supported
        Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
        ATI Radeon HD 5670 - VRAM: 512 MB
            iMac 1920 x 1080
    System Software: ℹ️
        OS X 10.9.5 (13F1066) - Time since boot: 0:57:3
    Disk Information: ℹ️
        ST31000528AS disk0 : (1 TB)
            EFI (disk0s1) <not mounted> : 210 MB
            Mac HD (disk0s2) / : 999.35 GB (800.33 GB free)
            Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
        OPTIARC DVD RW AD-5670SC 
    USB Information: ℹ️
        Apple Inc. Built-in iSight
        Apple Computer, Inc. IR Receiver
        HGST G-Drive Slim 500.11 GB
            EFI (disk1s1) <not mounted> : 210 MB
            G-DRIVE slim (disk1s2) /Volumes/G-DRIVE slim : 499.76 GB (122.14 GB free)
        Apple Inc. BRCM2046 Hub
            Apple Inc. Bluetooth USB Host Controller
        Apple Internal Memory Card Reader
    Configuration files: ℹ️
        /etc/hosts - Count: 15
    Gatekeeper: ℹ️
        Mac App Store and identified developers
    Kernel Extensions: ℹ️
            /Applications/Toast 10 Titanium/Toast Titanium.app
        [not loaded]    com.roxio.BluRaySupport (1.1.6) [Click for support]
            /System/Library/Extensions
        [not loaded]    com.devguru.driver.SamsungComposite (1.2.13) [Click for support]
        [not loaded]    com.leapfrog.driver.LfConnectDriver (1.8.1 - SDK 10.7) [Click for support]
            /System/Library/Extensions/ssuddrv.kext/Contents/PlugIns
        [not loaded]    com.devguru.driver.SamsungACMControl (1.2.13) [Click for support]
        [not loaded]    com.devguru.driver.SamsungACMData (1.2.13) [Click for support]
        [not loaded]    com.devguru.driver.SamsungMTP (1.2.13) [Click for support]
            /Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
        [not loaded]    com.roxio.TDIXController (2.0) [Click for support]
    Startup Items: ℹ️
        AdobeVersionCueCS2: Path: /Library/StartupItems/AdobeVersionCueCS2
        Startup items are obsolete in OS X Yosemite
    Launch Agents: ℹ️
        [not loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.CS5ServiceManager.plist [Click for support]
    Launch Daemons: ℹ️
        [loaded]    com.adobe.fpsaud.plist [Click for support]
        [loaded]    com.adobe.SwitchBoard.plist [Click for support]
        [loaded]    com.leapfrog.connect.shell.plist [Click for support]
        [loaded]    com.microsoft.office.licensing.helper.plist [Click for support]
    User Launch Agents: ℹ️
        [loaded]    com.adobe.AAM.Updater-1.0.plist [Click for support]
        [loaded]    com.adobe.ARM.[...].plist [Click for support]
        [failed]    com.apple.CSConfigDotMacCert-[...]@me.com-SharedServices.Agent.plist
    User Login Items: ℹ️
        iTunesHelper    Application  (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
        Monitor    Application  (/Applications/LeapFrogConnect.app/Contents/Monitor.app)
        FontAgent Activator    Application  (/Library/Application Support/FontAgent Pro/FontAgent Activator.app)
    Internet Plug-ins: ℹ️
        JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
        FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
        Default Browser: Version: 537 - SDK 10.9
        AdobePDFViewerNPAPI: Version: 10.1.13 [Click for support]
        AdobePDFViewer: Version: 10.1.13 [Click for support]
        Flash Player: Version: 16.0.0.305 - SDK 10.6 Outdated! Update
        QuickTime Plugin: Version: 7.7.3
        OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
        SharePointBrowserPlugin: Version: 14.2.3 - SDK 10.6 [Click for support]
        Silverlight: Version: 5.1.20913.0 - SDK 10.6 [Click for support]
        iPhotoPhotocast: Version: 7.0
    3rd Party Preference Panes: ℹ️
        Adobe Version Cue CS2  [Click for support]
        AppTrap  [Click for support]
        Flash Player  [Click for support]
        Growl  [Click for support]
        Perian  [Click for support]
        Quark Update Preferences  [Click for support]
    Time Machine: ℹ️
        Skip System Files: NO
        Mobile backups: OFF
        Auto backup: YES
        Volumes being backed up:
            Mac HD: Disk size: 999.35 GB Disk used: 199.02 GB
        Destinations:
            G-DRIVE slim [Local]
            Total size: 499.76 GB
            Total number of backups: 80
            Oldest backup: 2014-06-09 07:55:44 +0000
            Last backup: 2015-03-18 16:14:37 +0000
            Size of backup disk: Too small
                Backup size 499.76 GB < (Disk used 199.02 GB X 3)
    Top Processes by CPU: ℹ️
            14%    mdworker
             4%    mds
             2%    WindowServer
             0%    fontd
             0%    ocspd
    Top Processes by Memory: ℹ️
        588 MB    Safari
        210 MB    com.apple.WebKit.WebContent
        64 MB    com.apple.IconServicesAgent
        56 MB    ocspd
        39 MB    Finder
    Virtual Memory Information: ℹ️
        1.57 GB    Free RAM
        1.42 GB    Active RAM
        423 MB    Inactive RAM
        638 MB    Wired RAM
        1.06 GB    Page-ins
        40 MB    Page-outs
    Diagnostics Information: ℹ️
        Mar 18, 2015, 04:00:15 PM    Self test - passed
        Mar 16, 2015, 09:54:36 AM    /Library/Logs/DiagnosticReports/iTunes_2015-03-16-095436_[redacted].hang
    Any help would be gratefully received. Thanks

    When you see a beachball cursor, note the exact time: hour, minute, second.  
    These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad and start typing the name.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen.
    Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
    Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
    Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • ILL 10 selection tool not working

    I'm working in Illustrator 10 on a Mac, 10.3.9.
    When I use the selection tool and click on an object or text block I no longer get the bounding box. If I select a circle it is selected as if I were using the direct selection tool. I can no longer scale an object using the selection tool or decrease the size of a text box. Any insight into this would be great. I don't know if I accidentally reset one of the preferences or if something has gone buggy with the program.
    thanks in advance.
    John

    John,
    View>Show Bounding Box.

  • Group Names Do Not Appear on iPhone

    Yesterday, an anomaly occurred on my iPhone 3G (version 3.1.3) regarding accessing Contacts. When I would press the Contacts button, all I could get would be the list of contacts in one of my Groups. I could not access the pages showing ALL contacts, nor could I even move off page of that one Group, which was the latest Group I had accessed. I was confined into seeing only Group's contacts.
    On the theory that the Contacts software on the iPhone got corrupted, I went through all the trouble-shooting steps recommended by David Pogue in his book, iPhone: The Missing Manual, including resetting the iPhone's settings, and eventually doing a complete restore of my iPhone's firmware and software via iTunes.
    The restoration fixed one problem, but there seems to be another problem with Contacts that I do not understand. After the restoration, I can now access the complete list of my individual contacts. That's a good thing. But when I click the button to move to the Groups page, the Groups page is blank, even though my Address Book has about ten groups that it should be sending to MobileMe for syncing.
    As a test to force a change in my Calendar, my Contacts and my Groups lists, I added a new event, a new "test" contact, and two new "test" groups. Then I synced up my computer with MobileMe. The new names for the test groups show up fine on the MobileMe website, so syncing from my computer to the web is working OK. But, while the new event and the new contact show up fine on the iphone, the Groups page on the iPhone still is blank.
    Anyone have an insight into this problem? Am I overlooking something here? Or has something gone buggy on my iPhone?

    While waiting for a reply, I telephoned the local Apple Store, and I explained the problem, asking if I could get help over the phone, or if I had to bring my phone in. The person I spoke with was most helpful, and she solved my problem over the phone.
    She explained that, when an iPhone is restored via the backup saved by iTunes to the source computer, the restoration process does not bring an iPhone back to its exact previous state all by itself. In my case, even though some syncing was occurring via my MobileMe account, I needed to add that account back onto my iPhone via the Settings > Mail, Contacts, Calendars > Add Account > MobileMe commands.
    As soon as I had completed adding my MobileMe account email address and password, full syncing privileges were restored. The Groups page, showing all of my Group Names, together with the right-arrows leading to the contacts in each group, are now correctly showing up again.
    I do not know what may have happened yesterday to cause the glitch, but the restoration of my iPhone via iTunes, and the adding back of my MobileMe account registration information, has solved the problem.

  • Lost ability to save files within site

    I'm working on a website for my company. Everything's been
    going smoothly until today, and I'm not sure what I did wrong, but
    I'm hoping someone can tell me how to fix it. I'll try my best to
    give the information that will be needed.
    First of all, my problem is, for some reason, I can no longer
    save a file to the site root. More importantly, it's the home page.
    I was working on it, and when I clicked Save, nothing happened. I
    tried "Save As" and still nothing. I decided to restart the
    program, assuming I'd have to redo the steps I'd just taken,
    however upon reopening dreamweaver, the file was GONE.
    I've tried exporting the origional file from Fireworks, but
    as soon as I make any changes to it in Dreamweaver, I have the same
    problem as I mentioned above.
    Other important information could be: I was publishing the
    site to a local folder.. and I had that local folder attached to a
    test server. I started to have problems with the test server, so I
    closed the connection. While trying to repair that problem, I
    renamed the local folder that I had been publishing to. In Manage
    Sites I selected "None" instead of "Local or Network folder" so
    that the site would be local only.
    So I'm pretty sure I screwed it up while messing with the
    test server/ local folder, but since none of that is hooked up
    anymore, shouldn't it work now?
    Please, somebody help me before I tear my hair out? Please?
    Thanks!!!!!!
    Alexis

    Why not start by defining your site on your local machine,
    develop it
    locally, then transfer it to the network machine/server when
    done? Save all
    the hassle?
    "abrussell" <[email protected]> wrote in
    message
    news:eubrre$387$[email protected]..
    > So I'm pretty sure I screwed it up while messing with
    the test server/
    > local
    > folder, but since none of that is hooked up anymore,
    shouldn't it work
    > now?
    It would appear so..
    Brendon

  • How to set a back ground to be shown in the whole browser...

    Hi all,
    1. How to set a background in Adobe Dreamweaver so it's gonna be visible in whole browser no matter what resolution is set, the problem is that I cant set to repeat it as the backgroud is not symetric (picture below):
    http://a.imagehost.org/view/0568/Untitled-2
    2. I would like to know how to create a shiny/glossy objects like rectangle or so in Photoshop. Could you recommended some addons/plugs? An example:
    http://www.istockphoto.com/file_thumbview_approve/6137760/2/istockphoto_6137760-shiny-rect angle-menu-buttons.jpg
    Thanks from advance for any help.
    Regards

    Here's an example using the background image you linked to.
    http://perrelink.com.au/forum/repeat-bg/
    Look at the code and see how I've applied the background image to the body tag in the css.
    Nadia
    Adobe® Community Expert : Dreamweaver
    http://www.perrelink.com.au
    Unique CSS Templates | Tutorials | SEO Articles
    http://www.DreamweaverResources.com
    http://twitter.com/nadiap

  • Where is the New CSS Rule   button that was in the properties tab?

    There used to be a plus button in the properties tab.  In Dreamweaver CS6 it is gone.  I loaded in a tracing image, I want to type the * tag so the image and everything else will align to the upper left coordinates 0,0.
    Sean

    Jon Fritz II, you Rock!  That was it I can see the Plus Button, and other icons at the bottom of the old CSS Panel by hitting Control + Alt + Shift + P.
    Thanks,  Have a great day!
    Sean

  • Website Slicing Issues

    Website Slice Breaking Problems! www.designbyjase.co.uk/index.htm#page3
    I have just recentley uploaded my new Graphic Design Portfolio site www.designbyjase.co.uk/index.htm#page3 - I created it using HTML and some code but I'm a noob at coding and Dreamweaver so I'm gonna need someone to explain it to me in plain English as I'm.....dumb. Basically you can see my site breaking apart due to the slices (i'm guessing)...how do I solve this? Thanks!

    There are no pages uploaded at that site.

  • Cannot SSH to remote host

    Every attempt shows connection timed out. I am able to connect within the local network but not from a remote location. I did forward port 22 on the airport extreme through airport utility but when I nmap my ip, port 22 is not open. Are there additional steps required to port forward.

    missallie, you're not alone.  i have been having this problem for about a year.  it is not consistent, but happens about 4/5 the time. 
    i too have read dozens of forums discussing the problem and no real solutions, just a lot of people pointing out the obvious things (i.e. "check to see if your ftp information is correct", "turn on passive ftp", etc.)
    the only change in my service, hosting, or software at the time was a recent change in web hosting, so i contacted them first.  the person i spoke to was a mac user (like me) and a dreamweaver user.  all he had to say was that it wasn't a problem on their end and that dreamweaver ftp has always been buggy. 
    i'm still looking for solutions though, it's simply too much of a hassle to work around 4 days out of the workweek.

  • SMART "failing" changes to "verified"--Is this normal?

    A couple of days ago my PowerBook's hard drive began freezing up. I checked the SMART status, and sure enough, it was reported as "failing."
    So, I called AppleCare. I was told to back up my data (if possible) and then reinstall the software to see if the trouble continued.
    I did a clean install and, lo and behold, SMART status is now listed as "verified."
    Is it normal for a drive's SMART status to be listed as failing simply because the software has gone buggy and a clean install is needed? Should I trust it now that it says "verified"?
    I'm concerned...very concerned.

    EddieC...
    Actually, everything seemed to be fine prior to getting the "Failing" message. No spinning beachballs, slowdowns or other problems EXCEPT for the "buzzing while titled" noise coming from the hard drive. That problem--well-documented in these forums--had been with my PowerBook for several months. It was when the buzz became apparent even when the PowerBook wasn't being titled or otherwise moved that the drive went south.
    There's a happy ending to this story, though: AppleCare's shipper picked up my machine on Sunday, AppleCare fixed it on Monday, and I just got it back a few minutes ago (Tuesday morning in Japan). The hard drive has been replaced and they also reported fixing a couple of internal cables. So, all is well!
    The only disappointment--they replaced the old drive with the same 4200-rpm model. I was hoping to get a slightly faster drive! No complaints, though--AppleCare came through with flying colors.

  • Color icons gone in Dreamweaver CC (version 13)

    Hi.
    Whay are the color icons in Dreamweaver CC (version 13 mac) gone? Very bad
    Much harder to see if i'm connected to remote site is one very frustrating thing.
    I managed to replace some of the icons with versions from DW6. But many are still missing.
    Does anyone have a good tip for replacing all of them?
    Regards
    Olle

    Well ... I know they where removed ... but I'm missing them
    The bottom of the thread in that link leads to this statment from Adobe
    http://blogs.adobe.com/dreamweaver/2012/10/dreamweaver-creative-cloud-update-12-1-faqs.htm l
    "To help you focus on the page and avoid distraction from colorful elements in the user interface, color options for Insert icons have been deprecated."
    Ha ha ... so I need help focus on the page and not get distracted by color icons
    I think it would be good to have an option to choose color or gray. Like it was before.
    It's not helping me to focus on the page with only gray icons. What a stupid thing to say ...
    I think a little color makes things look better (and easier to know if i'm connected to the server or not).
    Witch one below stands out the most?
    Regards
    Olle

Maybe you are looking for

  • Fields under the tab Goods Receipt in process order.

    Hello Experts, While creation of process order, the fields under the tab 'Goods Receipt' are disabled and already checked. Fields are 'Goods Receipt' and 'Goods Receipt, Non-Valuated'. Fields are 'WEPOS' and 'WEUNB' accordingly. Whereas when we creat

  • How to deal with SOL9 DVD Segments?

    Hello, I have downloaded the DVD segments of Solaris 9 and had assumed that I would understand what to do with them once downloaded. Unfortunately I do not. I have tried putting them all on a DVD. I have tried extracting them but segments 2,3,4 repor

  • Dictation with mountain lion

    Cannot get dictation feature to work with mountain lion.  The feature in the control panel is set to automatic and operates when you select function twice but it doesn't seen to pick up any sound or send back any input.  Please advise.

  • How good is aperture 2

    HI All just got a mac ( about 1 week) just getting used to iphoto and just wondered whether it is worth getting aperture 2, at the moment i use elements 6 on my laptop so need something to fine tune my phot's i like the way that iphoto catalogues but

  • What is wrong with networking with 64bit Arch?

    I have 3 hosts behind a router: 1 laptop with Arch i386 1 laptop with Arch x86_64 1 nettop with Arch x86_64 If I use 64 bit Arch, after about 15 minutes without touch anything (just in idle) the whole network stop working -> there is no internet conn