Dreamweaver 8 and DW cs4 or DW cs5 on the same system?

Hi all,
I'm using DW8 + MX Kollection 3.7 pro for large sites and I I'm thinking to install DW CS4 or CS5 along with it.
So, my question:
can I install DW CS4 + ADDT or DW CS5 (alone) on the same system?
Do they interfere each other?
I don't mind working on the same website with different version of DW.
But it could happen that I will need to edit a page of a website with a different verison of DW. Is there any problem to do this?
For example: will DW CS4 + ADDT retain all server behaviuors created in DW 8? or, at least, will DW CS4 editing break server behaviour so that I will not able to work again on the page with DW8?
Sorry for all these /dumb) question but I fear upgrading (every application) will break something working right away.
TIA
tony

So, my question:
can I install DW CS4 + ADDT or DW CS5 (alone) on the same system?
Do they interfere each other?
Yes, you can install them on the same system, and no, they won't interfere with each other.  Each version of DW installs as a complete, standalone application.
But it could happen that I will need to edit a page of a website with a different verison of DW. Is there any problem to do this?
No there's not a problem.

Similar Messages

  • Can I run Photoshop CS4 and CS5 on the same system?

    I read somewhere a zillion years ago (right?) that you coould run CS4 and CS5 on the same system but at the time I wasn't even considering it.
    Run on the same system - not ness to run at the same time
    Or should I install it on a seperate drive (bootable) and go that route. What has everyone found to work and/or not work?
    Thanks in advance for your help
    BJ

    Yes, you can run CS4 an CS5 on the same computer.  They install in different folders and don't get in each other's way.  As a matter of fact, you will find many posts in this forum from the experts recommending to keep CS4 (or an earlier version) when installing CS5.  This way, there is no danger of losing any older plug-ins you may have that aren't compatible to CS5.
    When I installed PS CS5 I had problems with my scanner driver.  Instead of spending loads of time fixing that problem, I just use PS CS4 when I want to spend an afternoon scanning things. I'm not recommending that "lazy man's" solution, but it is an example of how CS4 and CS5 can be used on the same system.

  • InCopy CS4 and InDesign CS4 cannot open file at the same time!

    I have 2 editors that make changes in my indd file. The one editor is able to open the file concurrently with myself (i'm in indesign) just fine. But when the other editor wants to open the file....I cannot open the indd file and vice versa. We are PC based.
    shane

    Yes, we are all working on the same server.
    And Yes on the Editor A / scenario 1  (Designer opens file and Editor A opens file concurrently). works fine.
    Editor A closes out of Incopy and so does Designer. Editor B opens the file and Designer tries to open the indd file and now the designer gets the warning: Cannot open document. You may not have permission or the document may be open already. This is the same error if the Designer opens the file first and Editor B tries to open it while the designer has it open.
    Editor A and B are able to have the file open at the same time no problem.
    Also this happens to all indd files that Editor B tries to open. So it is not linked to a problem with the file.
    one other note: on the server just above the indd file...when Editor B has the indd open in InCopy... a 'temporary' Indesign Lock File appears.
    shane

  • Can you run Photoshop CS3 and CS5 on the same system?

    I did this before on another system where I had both CS2 and CS3 installed and I could run either version when I wanted.  Back then I just never bothered to uninstall CS2.
    Now on this system I'm tunning CS3 and I have some plug ins I use regularly that aren't compatible with CS5 and I don't want to lay out the cash again for them.  So I'd like to be able to install CS5 and use it primarily but when I need to use the plug ins then just switch to CS3.
    I've noticed many programs these days won't run on top of another version.  So is there any reason I won't be able to run both?

    Absolutely.  All versions of Photoshop can coexist simultaneously, though you can only run one at a time.
    It's usual not to install the old version until you're sure the new one is working great.  If you have the space, never uninstall it.  It's handy to have it around for answering questions, here for example.
    -Noel

  • Creating SCORM/AICC compliant content in Adobe Dreamweaver and Flash CS4

    Could anyone please advise if Dreamweaver and Flash CS4 is suitable for creating e learning SCORM/AICC compliant content?
    Many Thanks.

    I thought Captivate was only flash based projects. I am currently installing the trial version of the suite to investigate.
    I have read the features section of the suite and it states that Dreamweaver CS5 comes bundled with 'Domain specific html templates' that are 'instructionally sound' html templates for elearning course development. Are these not SCORM compliant?
    I am really just creating a very simple online course that contains no interactive activities or assessments and is very heavily text based with several supplied flash videos. Advice on what would be best to produce this in would be appreciated.
    Please note I have very little understanding of SCORM compliancy etc at this stage.
    Many Thanks.

  • CS4 and CS5 at the same time

    Hi,
    Can anybody tell me that; can we keep both Flash[and/or Creative Suite]CS4 and Flash[and/or Creative Suite]CS5 at the same time??? Actually i have both[CS4/CS5] in my machine, but the problem is when i start Flash CS4, it crashes, and sometime Flash CS5 also crashes. So is there any way that i can have both Flash (CS4/CS5) without any problem??
    Can anybody help me out in this regard?

    Hi ,
    You can Install CS4 and CS5 in same  machine . There shouldnt be any problem with that.
    Thanks
    Sukhbir
    Flash Authoring

  • Adobe Photoshop CS2 and Photoshop CS4 on the same system?

    Hi all,
    I was wondering is it possible to have both Adobe Photoshop CS2 and CS4 on my computer at the same time.  I heard that this would cause errors, but if there is, is there a work around for it.  Thanks in advance.
    pwitman

    pwitman wrote:
    Hi all,
    I was wondering is it possible to have both Adobe Photoshop CS2 and CS4 on my computer at the same time.  I heard that this would cause errors, but if there is, is there a work around for it.  Thanks in advance.
    pwitman
    Quite a few people keep an older version in case there is something not right for them in the newer version.
    Just make sure they are installed in that order.
    Be prepared to have your file associations changed.
    What is you OS by the way?

  • Running Production Premium CS5 & CS6 on the same system / any issues ?

    Still not sure which way to go with the CS6 upgrade, non-Creative cloud version.. 
    Run both on the same system or uninstall CS5 first.. 
    Prefer not to slow down the system but CS5 is running perfectly now..  
    Anyone tried both at the same time ?
    How is opening existing CS5 projects with CS6, this is a concern for me & why I might like to have both installed on the same system ?

    Having installed CS5, CS5.5, CS6 and CC is no problem. They are separate installs.
    Moving projects from CS5 --> CS5.5 --> CS6 --> CC is no problem.
    Moving projects from CC --> CS6 is not possible.
    Moving projects from CS6 --> CS5.5 can be problematic.

  • I have had audition for 2 years.  Today it crashed.  It gave a configuration error: 16  The message said to uninstall and reinstall.  I did.  Still the same error.  Then I searched forum and checked the two folder permissions.  They were correct.  So what

    I have had audition for 2 years.  Today it crashed.  It gave a configuration error: 16  The message said to uninstall and reinstall.  I did.  Still the same error.  Then I searched forum and checked the two folder permissions.  They were correct.  So what do I do???????

    Hi Charles,
    Please refer the following helps article on the problem.
    https://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
    Hope this helps.
    Regards,
    Sumit Singh

  • FaceTime and iCloud must be signed in to the same Apple ID to use iPhone Cellular Calls.

    FaceTime and iCloud must be signed in to the same Apple ID to use iPhone Cellular Calls.
    This is the error message I receive when I try to add my phone to my Mac for proximity / FaceTime audio calling.  This feature worked until I changed my Apple ID.  I have updated my Apple ID everywhere I can think of updating it.  I've signed out of Apple ID on my Mac, deleted EVERYTHING (calendars, contacts, etc.), signed back in, etc.  I've done the same with my phone, and even done a power-down / reboot and nada.  I keep getting this message from the Mac.
    I can't figure out where else I should look for my old Apple ID to be logged into anything or creating problems.  I've gone over my iPhone and Mac and I'm at a loss.  As an aside (and yes, wrong forum), have lost the ability to do SMS forwarding since the Mac no longer receives the code from my iPhone to allow this feature to work.  This was lost after signing out of the Apple ID on my Mac this afternoon.
    Bluetooth is turned on for both devices.  Both devices are on the same WiFi network.  Both devices otherwise appear to be working correctly with the exception of the problems I'm having with FaceTime and iCloud being signed into the same Apple ID (which they are).
    Thanks in advance,

    (By the way, I should have pointed out in my earlier posting that I'm running OS X Yosemite 10.10.3 on my Mac). I Just installed latest Yosemite update while my iPhone was switched off, and when my Mac restarted, the 'iPhone Cellular Calls' checkbox in the FaceTime preferences was checked and the problem was therefore solved. Switched on my iPhone, still fine. Relief.

  • I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

    I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

    Prep your new drive:
    Drive Preparation
    1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    After formatting has completed quit DU and return to the installer. Install OS X.

  • Or some reason everytime i got to my membership for pet insurance it says wrong password the i go back to IE 11 and it lets me sign in with the same password...

    for some reason everytime i got to my membership for pet insurance it says wrong password then i go back to IE 11 and it lets me sign in with the same password...What gives..do I have to have 8 different browsers to get into certain accounts...lol...help

    Hi vikadelic,
    Do you store your passwords in the browser? If so, you may want to update them to make sure that they are trying to login with the right credentials: [[Password manager - Remember, delete and change saved passwords in Firefox]]
    If that is not the case, it may be an old stored cookie: [[Delete cookies to remove the information websites have stored on your computer]]

  • Remote and direct update of master data at the same time

    Hello
    Is it possible to do remote and direct update of master data at the same time? If yes where it could be used?
    Thanks

    Hi,
    What do you mean by Remote Update ?
    regards
    Happy Tony

  • Does a DVI to VGA adapter, and a DVI to DVI adapted do the same job?

    Does a DVI to VGA adapter, and a DVI to DVI adapter do the same job?

    cpc.1234 wrote:
    Does a DVI to VGA adapter, and a DVI to DVI adapter do the same job?
    A DVI to VGA adapter provides a conversion from DVI to VGA.
    A DVI to DVI adapter, what is that? If the input is DVI and the output is DVI, what is the need for an adapter?
    Tell us what you are trying to accomplish.

  • How to open and save pictures from 1 folder at the same time?

    Is there a way to open and save pictures from 1 folder at the same time?
    I'm creating a vi that resizes the picture but I want to do it with 1 folder at a time... Is this possible?
    greetings!

    Hi Kway,
    Here you are. I wrote a file a customer times ago & It did what you want!
    Just see the attachements and keep me inform.
    Regards,
    Julien Roland - District Sales Manager
    NI Belgium - Technical Support
    Don't forget to rate a good answer
    Attachments:
    Test existing Files.vi ‏23 KB
    Delete files from array of files (SubVI).vi ‏16 KB

Maybe you are looking for

  • Can't boot SL 10.6.3 in normal mode, works in Safe Mode

    I took receipt of a new i7 MBP with high-res screen a few days ago, and have been struggling to get it to work right. I swapped my 256 Samsung SSD from my previous MBP (Unibody with replacable battery, 14 months old), which seems the main reason for

  • HT201300 How do I calibrate the battery of my MacBook Pro 15?

    Battery of my MacBook Pro 15 seems to be draining out very quickely. How do I calibrate it? How to make it better perform?

  • Index range scan cost change in 10.2.0.1

    SQL> create table t1 as 2 select 3 rpad('x',40) ind_pad, 4 trunc(dbms_random.value(0,25)) n1, 5 trunc(dbms_random.value(0,25)) n2, 6 lpad(rownum,10,'0') small_vc, 7 rpad('x',200) padding 8 from 9 all_objects 10 where 11 rownum <= 10000 12 ; Table cre

  • Canoe Event Handling in Labview

    Anybody worked on handling the events of CANoe in Labview? I am trying to handle the event when there is a value change in the environment variable of CANoe. CANoe provides a COM method "OnChange" but i do not know how to implement this method in Lab

  • Deleting iphoto clips in imovie

    In Imovie, I can see and edit my iphoto videos.  If i delete these iphoto clips within imove, are they deleted completely or do they remain in iphoto?  Thanks so much for your help.