Dreamweaver 8 and keystroke issues

I recently installed Dreamweaver 8 along side of Dreamweaver
MX. After the install was complete I tried to use Dreamweaver 8 and
found that certain (letter) keys were not reconginzed when I typed
them in the design window. I then tried typing in the code window
and they would not work there either.
Any suggestions?

What OS?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"wblackstone" <[email protected]> wrote in
message
news:f17tjc$ha8$[email protected]..
>I recently installed Dreamweaver 8 along side of
Dreamweaver MX. After the
> install was complete I tried to use Dreamweaver 8 and
found that certain
> (letter) keys were not reconginzed when I typed them in
the design window.
> I
> then tried typing in the code window and they would not
work there either.
>
> Any suggestions?
>

Similar Messages

Dreamweaver, DropBox and FTP Issues

In the past couple of days, I've run into a new issue with DreamWeaver and the only logical explanation I can come up with is the following.
I have DreamWeaver set to put the file on save. So it goes right out to my server. 99% of the time, I'll run into a "Access denied. The file may not exist locally, may be open in another program, or there could be a local permission problem." error.
Nothing has changed on my server that should affect this problem. I started using DropBox perhaps 2 years ago, and have kept all of my files in DropBox for easy access and security (auto backups). Never had a problem until this week.
I'm seeing this error in Dreamweaver CS6 and Dreamweaver CC on multiple machines. The only thing I can think of is the following.
Dreamweaver Saves the file.
Dreamweaver lets go of the file for a second.
DropBox grabs the file and starts uploading it to their servers.
DropBox actually locks the file during this process (guessing here).
Dreamweaver tries to grab the file, and since it's locked by DropBox, it can't take control of it locally.
Dreamweaver kicks back the error above.
If I immediately select the file, right click and say "put" it works without issue. Every time. It simply won't put on save. I presume I could test this by moving the files out of DropBox and seeing if it stops. Was curious if anyone has seen this issue, and if there might be a way to delay the "put on save" by 1-2 seconds, giving DropBox enough time to grab, put and let go of the file I'm working on.

Hi WesLinda,
Have you enabled the option "Automatically upload to server on Save" in server settings Advanced tab. If not try that. You will not have to upload the files manually.
If you still get the issue. Do a test and then see what happens.
1) Stop the Dropbox services for a while by ending the related processes from the Task Manager or disable the services from Startup item and reboot the computer.
2) Work on files in DW and then check how much time it takes.
3) Restore the DropBox services back.
Thanks
Bhawna

I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch. All other components work normally. In Activity monitor it says Adobe switchboard failed to respond. Can anyone help solve this issue?

I've installed CS6 and web Premium on a Mac running 10.9.5, and Dreamweaver,Flash and Illustrator wont launch. All other components work normally. In Activity monitor it says Adobe switchboard failed to respond. Can anyone help solve this issue?

Release: 4/25/2012
http://support.amd.com/us/gpudownload/windows/Pages/radeonmob_win7-64.aspx

Installation issues including AAM, Dreamweaver CS6 and Phtoshop CS6

Hi Everyone,
This discussion is a continuation of a thread that was started in the 'Creative Cloud' discussion forum. It's important to read this discussion first to get a background regarding the underlying issues first.
To continue, this new discussion will keep the issue in the open - I don't want it hidden away as I believe others may benefit from suggestions and issues along the way.
Quick recap:
My UK organisation purchased 6 licences each of Photoshop CS6, Dreamweaver CS6 and Acrobat 10 via an Adobe License Certificate.
The license keys were given to me to download and install the software.
I downloaded from http://www.adobe.com/downloads but on installing was told that the key was invalid.
Contacted Adobe support several times and finally found that the software had to be downloaded from https://licensing.adobe.com.
Didn't have an account as these are held by my organisation's purchasing team.
Adobe added my details to my company's account eventually.
Downloaded and installed the software.
At fisrt I used the software and, as with most software rushed through for a deadline, discovered various bugs (mainly in Dreamweaver it has to be said, as I haven't really had chance to use the other two products yet). So...
Attempted the automatic update process. This failed due to restrictions on our firewall.
Checked the Adobe site which said check the log files. Checked the log files and found a warning (this is detailed in the other post metnioned above).
Chatted with Adobe support twice at this point to try and pinpoint the issues. They suggested downloading the updated updater(!).
Dreamweaver update process went 65% of the way through before freezing with 5 seconds left on the clock and Photoshop failed altogther saying that the updater was invalid. Dreamweaver gave me the error number U44M2I218, as discussed in the other thread by Ken.
I completely uninstalled every Adobe product, including Flash and Air
and ran the Cleaner Tool.After reinstalling and attempting the upgrade process for only Photoshop and Dreamweaver I received the same issues as discussed previously.
For some reason this caused issues with my OS and I've had to rebuild. This time I'm running Windows 7 instead of XP SP3, but these products are not getting installed until someone from Adobe
can give me clear direction as to what I need to do.
To bring this up to date I received a PM this morning from Jeff Wright. The message reads:
To: mandelbrot
From: Jeff A Wright
Sent: 23-Oct-2012
Subject: Private Message: Regarding your updating difficulties
Good day Paul Weston,
I am contacting you regarding the difficulties you have been having applying the Dreamweaver 12.0.2 update. If you have contacted our support team if you can please provide me with the case number it will allow me to review your interaction. In addition if you can please let me know your preferred e-mail address we can bring this conversation into e-mail as opposed to sending private messages back and forth. This will be especially important when we need to look at your installation logs for the update which you are having difficulty applying.
Thank you,
Jeff Wright
My reply:
Hi Jeff,
Unfortunately I don't have any case number(s) even though I spoke to several of your colleagues in India, bit via chat and telephone. Each time no case number was given to me. At one point I did fill out a survey, also!
If you can trace it from this, my email address is <<emailadress>>, I'm linked to <<organisation>>NHS Trust and our primary contact used to be a gentleman called Eddie Drake (either <<emailaddress>> or <<emailaddress>>). Failing that, our software license certificate number is <<id>>, end user id (whatever that is) is <<id>> and our Adobe order number for this consignment is <<id>>.
I don't want to hide this away from the community and have opened a new discussion to this end - any PMs or emails will be dropped into this unless you choose to use the discussion as a contact method.
Paul.
Please feel free to add constructive comments anyone.
Regards,
Paul.

Sorry but that's not working for me - I clicked the link that you specified and got this page:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4773
With this text on it:
Adobe Application Manager
Adobe Application Manager Installer
This patch will install the Adobe Application Manager that is included with Adobe Creative Suite 6, Adobe Creative Suite 5.5 products. It is only necessary to run this patch if you are receiving one of the following error messages:
Adobe Application Manager is needed to update your product.
Adobe Application Manager is needed to start your trial.
For additional information on this issue, see, “Error, "Adobe Application Manager is needed..." when launching or using Adobe Creative Suite 6, Creative Suite 5 products” (cpsid_84344.)
File Information
Product
Adobe Application Manager
Version
CS6
Platform
Windows
File Name
ApplicationManager6.2_all.exe
File Size
50.9MB
Proceed to Download

Dreamweaver CS3 (9) maxed CPU slow performance and FTP issues.

Dreamweaver CS3 (9) maxed CPU slow performance and FTP
issues.
Never mind...I found it.
Of course I have all the firewall, worm, scanning, phishing
filtering, full time protect, and everything else turned off when I
am working on a remote/testing site however I found the Symantec
antivirus email scan being enabled (doesn't it just interact with
my email program?) was getting in the way of DW9 ftp operations,
causing some lagging that was putting DW9 into an unstable mode
during and immediately after (10 seconds) ftp operations.
The CPU still spikes to 99% during ftp functions but DW9
works even though it's likely taxed to the max but when I turn off
email scan DW9 returned to a functioning state during ftp and
remote file view. Whatever it takes huh?
PS: email scanning only never effected DW8.02
My System Info: properly configured (as in: everything works
or I fix it) Toshiba - XP pro SP2 – Pentium 4 - 2.3GHz
– 1.5 GB ram – Intel extreme graphics card 64 MB ram
– Apache 2.2 server – PHP 5 – MySQL 5 -
phpMyAdmin – Dreamweaver 8.02 – Interakt Kollection
3.7.1 – Dreamwweaver 9 - DeVtoolbox – Flash –
GoLive - Photoshop - ImageReady – Illustrator – Acrobat
– CuteFTP – Putty SSH - blabla...)

Thanks for the response. I managed to Google the 'nobody' account and found the explanation.
As you say, I assumed the 'syslogd' process had to do with system logs. I did check the console and couldn't find anything of particular interest in the logs.
I'll continue to monitor but if anyone has any further suggestions please post.
One thing that might also have an impact... my available drive space is now down to less than 5gb (runs anywhere between 1gb and 5gb free depending on what I'm running). I know this causes problems for Parallels as it keeps moaning at me, but would it cause any problems with OSX?
Thanks again,
Tom

Dreamweaver CC and Windows 8.1 - Can't Find A Valid Editor For This File Extension

Was running the latest version with no issues and then I loaded Office 2013 .. Now when I am in the remote site and try to double click on a .cfm file, I get a dialog box..Can't Find A Valid Editor For This File Extension..
I tried the support chat and they said Dreamweaver support was not available, try again later???
So I thought I would reinstall the CC version and now I can see the Dreamweaver icon next to the files but still ... can't open the file..
Any assistance would be appreciated?
Leo

The issue is only in Windows 8.x where when Dreamweaver CC is installed, it is not able to turn on the file type associations by default. The workaround for now is to manually add the extensions both within Windows and then within Dreamweaver CC itself.
Go to Control Panel > Programs > Default Programs > Set Your Default Programs and select Dreamweaver CC and then select 'Choose defaults for this program' and Select All or the extensions you want to open in Dreamweaver CC
Start Dreamweaver CC and go to Edit > Preferences > File Types/Editors and add '.cfm .cfc' to the extensions and then add C:\Program Files (x86)\Dreamweaver CC\Dreamweaver.exe then click on Apply and Close
That should be it.
James

Adobe CS5.5 Production Premium Install Errors and Other Issues

Hi,
I just installed Adobe CS5.5 Production Premium on my computer and had some errors pop up at the end of installation. I will paste the summary below. I've tried to install Procction Premium a couple of times. I've used the Adobe Cleaner Tool. From what I've researched, the Flash Issue is a a false error since Flash was already installed on the computer. Is the rest of it connected to the Flash issue as well?
Thr programs all seem to work fine except for the issue below.
My other question is that when I am in Windows Explorer and I Right-Click on say a .jpg file and select Open With... I am not able to select Adobe Photoshop or Illustrator for that matter. I have Dreamweaver CS4 and that shows up as an option. I have gone through the process of trying to add the Adobe Photoshop .exe file, but it still doesn't work. However, if I open Adobe Bridge, I am able to select Photoshop or Illustrator to open a file. Is this connected to my install or is there something else going on? I did uninstall an ancient version of Adobe Photoshop 7.0 that I've had for years, but that was prior to installing Production Premium CS5. Could that have caused an issue? I read that uninstalling an old Photoshop can cause problems like this.
Any help would be greatly appreciated.
Exit Code: 6
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 4 error(s), 2 warning(s)
----------- Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} Adobe SwitchBoard 2.0 2.0.0.0 -----------
WARNING: DF029: ARKServiceControl::StartService: Service not started/stopped SwitchBoard. Current
State: 0 Exit Code: 0 Service Specific Exit Code: 0(Seq 1)
----------- Payload: {2EE4F060-CEE6-4002-AA8B-91B791541767} Pixel Bender Toolkit 2.6.0.0 -----------
WARNING: DF035: CreateAlias:Icon file does not exist at C:\Program Files (x86)
\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit
2.6\windows\pb_app.icofile:\\\C:\PIXELB~1\source\winwood\Staging 0X1.7E8FC6P-
1021rea\windows\pb_app.ico42178f80493091e8e552c84a2897e9da68fce32_32_f80493091e8e552c84a28 97e9da68fce for icon C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Adobe Production Premium CS5.5\Adobe Pixel Bender Toolkit 2.6.lnk with target C:\Program Files (x86)\Adobe\Adobe Utilities - CS5.5\Pixel Bender Toolkit 2.6\Pixel Bender Toolkit.exe(Seq 89)
----------- Payload: {43A1C48E-3E50-410e-951C-E17A66BBF824} Adobe Flash Player 10 Plugin 10.0.0.0 -----------
ERROR: Error 1722.There is a problem with this Windows Installer package. A program run as part
of the setup did not finish as expected. Contact your support personnel or package vendor. Action
NewCustomAction1, location: C:\Users\RYANAN~1\AppData\Local\Temp\InstallPlugin.exe, command: -
install plugin -msi
ERROR: Install MSI payload failed with error: 1603 - Fatal error during installation.
MSI Error message: Error 1722.There is a problem with this Windows Installer package. A program run
as part of the setup did not finish as expected. Contact your support personnel or package vendor.
Action NewCustomAction1, location: C:\Users\RYANAN~1\AppData\Local\Temp\InstallPlugin.exe,
command: -install plugin -msi
ERROR: DW050: The following payload errors were found during install:
ERROR: DW050: - Adobe Flash Player 10 Plugin: Install failed
Message was edited by: rynohose

Yes, your installation errors appear to be the innocuous false errors related to the brain-dead Flash installer. If the programs seem to be working fine, don't worry about it. As far as not being able to open images with Photoshop from Windows Explorer, I recommend taking that question to the Photoshop forum.

After the latest Security Update 2012-001 (Mac OS X 10.6.8) my Adobe Photoshop CS 8, Dreamweaver 8, and InDesign CS programs crash when I try to save a file.

After the latest Security Update 2012-001 (Mac OS X 10.6.8) my Adobe Photoshop CS 8, Dreamweaver 8, and InDesign CS programs crash when I try to save a file. HELP!!!

Howdy,
Apparently some are reporting that this causes the older PowerPC (PPC) applications that are supported in 10.6 via 'Rosetta' to crash upon attempting to open/save/print using any dialog box, or fail in other similar ways such as simply not printing or quitting, or freezing/hanging/crashing of the application.
I have read of some companies that have indeed submitted proper bug reports to Apple, but that is not a guarantee of a bug-fix being issued.
You might wish to read:
http://www.macintouch.com/readerreports/snowleopard/index.html#d02feb2012
If you are unsure if you are still using PowerPC apps, if the application is currently running, look under the 'Activity Monitior' (in Applications -> Utilities), or alternatively you could check in the System Profiler, Applications. Check the column "Type".
Here is a fairly simple way you can restore you system and restore you applications functionality again, if you don't have a recent clone or good Time Machine backup that you can restore from. If you do, restore from your backup prior to having installed the Security Update 2012-001.
Time Machine restore: http://support.apple.com/kb/ht1427
If you are restoring a backup made by a Mac to the same Mac
With your backup drive connected, start up your Mac from the Lion recovery partition (Command-R at startup) or Mac OS X v10.6 installation disc. Then use the "Restore From Time Machine Backup" utility. Select the backup prior to your issues, and it will be restored back to the state it was in at that time.
If you can't easily restore from a backup, you can instead do the following:
- You first start by reinstalling your OS X 10.6.x, this will preserve all your user data, your applications, no worries there.
- Then install the Mac OS X 10.6.8 Update Combo v1.1 (links provided below)
- Make sure you're printers are showing up correctly in your system preferences, if not, re-add the printers
- Then finally, run the Apple Software Update (by pulling down the Apple Menu), and install any and all remaining updates, except do not then re-install the Security Update 2012-001. It is possible that you may have to reboot after installing some of the updates, and you may even need to run it a 2nd time to make sure that you've got all updates, except NOT the Security Update 2012-001.
Links for 10.6.8 Update Combo v1.1:
http://support.apple.com/kb/DL1399
or the link to directly download this 1.09GB combo updater:
http://support.apple.com/downloads/DL1399/en_US/MacOSXUpdCombo10.6.8.dmg
Cheers,
Daniel Feldman
=======================
MacMind
Certified Member of the
Apple Consultants Network
Apple Certified (ACHDS)
E-mail: [email protected]
Phone: 1-408-454-6649
URL : www.MacMind.com
=======================

Dreamweaver CS3 and Mac OS 10.4.11 Incompatability

I have been using Dreamweaver CS3 under OS 10.4.10 for a few
months without significant issues... but after upgrading to 10.4.11
there is a significant problem.
I am unable to access any of my remote servers to upload
files to the sites I have built.
I was able to reinstall Dreamweaver 8 and it works fine with
all the same setups
I've read a technote on a noted problem with Dreamweaver CS3
and Mac OS 10.5 - but it also appears to happen on 10.4.11
You can read the 10.5 technote here:
http://www.adobe.com/go/kb402780

I have not experienced this problem. Try removing the DW CS3
preferences file in your Library and then let DW build a new one.
BTW, what error you are getting when you try to FTP?

FTP Broken in Dreamweaver CS6 and CC

I have been unable to ftp into 1 of 3 websites that I maintain ever since upgrading to Dreamweaver CS6 (and now CC). The problem appears to be that the site's root directory name as reported by a PWD command is shorter than the name required to be issued by the CWD command after logging into the FTP server. CS5.5 logs into the website's FTP server without any trouble and the script looks like this:
< 220 Service Ready for new User
> USER .myusername
< 331 Password Needed for Login
> PASS
< 230 User HUBING Logged in Successfully
> PWD
< 257 "/EH05/users/hubing" is Current Directory
> PWD
< 257 "/EH05/users/hubing" is Current Directory
> CWD //gs16/gs16/share/web/cvel
< 250 Directory successfully changed to "/gs16/SHARE/web/cvel"
> PWD
< 257 "/gs16/SHARE/web/cvel" is Current Directory
> CWD /gs16/SHARE/web/cvel
< 250 Directory successfully changed to "/gs16/SHARE/web/cvel"
> PASV
< 227 Entering Passive Mode (130,127,239,114,143,84)
> TYPE A
< 200 TYPE Command OK A
> LIST
Dreamweaver CS6 and Dreamweaver CC start out correctly, then suddenly issue a QUIT command:
< 220 Service Ready for new User
> USER myusername
< 331 Password Needed for Login
> PASS
< 230 User HUBING Logged in Successfully
> PWD
< 257 "/EH05/users/hubing" is Current Directory
> CWD /EH05/users/hubing
< 250 Directory successfully changed to "/EH05/users/hubing"
> CWD //gs16/gs16/share/web/cvel
< 250 Directory successfully changed to "/gs16/SHARE/web/cvel"
> PWD
< 257 "/gs16/SHARE/web/cvel" is Current Directory
> QUIT
< 221 Closing Session
Any suggestions?

Bhawna,
Yes. I can establish a connection without defining the site root folder. The directory that I login to by default is /EH05/users/hubing. One of the other sites that I maintain is in a subdirectory of that folder and Dreamweaver CC connects to that site without any problem. It just isn't able to switch to //gs16/gs16/share/web/cvel. Dreamweaver CS5.5 and WSFTP don't seem to have any problem with this.
Unfortunately, I can't send you the .ste file, because the password can't be shared. I appreciate your help though!

How do I tile the Dreamweaver panels and document windows to tile instead of being superimposed?

How do I tile the Dreamweaver panels and document windows to tile instead of being superimposed?

I'm not sure what may be causing your issue on the right side of the screen, other than possibly your application frame is wider than your screen size so you aren't able to drag the window tab far enough to get the highlighting effect. Make sure your application frame is maximized to your screen by hitting the middle button in the top right of the window so it changes to the double square icon. That way, you'll know whether the edge is off screen or not.
Only certain windows can be brought to the top or bottom since those are reserved for toolbars and the Properties Inspector respectively.

Dreamweaver MX and External Style Sheets

Hi, this issue has been causing me some issues and I am
hoping some one may hold the answer. I have searched high and low
but not able to find the answer to this...
I have dreamweaver MX, I use a style sheet on an absolute URL
in my dreamweaver HTML files as follows.
<link href="
http://mysite/CSS/stylesheet.css"
rel="stylesheet" type="text/css">
When I edit a HTML file in dreamweaver that has this refernce
in it I get no options in my style sheet menu to select my defined
styles in the style sheet. I know the style sheet works as if I
preview this page in Internet Explorer or firefox it loads the page
and appllys my styles to it so it looks completely differnt to what
it looks like in Dreamweaver.
I have found if add this link into dreamweaver it works
giving me my options for my styles so I can format my page and it
shows correctly in Dreamweaver.
<link
href="file:///Q|/Documents%20and%20Settings/BOBO/Desktop/CSS/stylesheet.css"
rel="stylesheet" type="text/css">
The only thing that differs from each links is the location,
the one stored locally works fine but the one on the website will
not work and dreamweaver mx will not access it.
I then tried the exaxt same scenario in Dreamweaver 8 and
using both links locally and absolute it works on both links
perfectly fine and I can see my stlye sheet options. So it seems
Dreamweaver 8 is able to connect to both a locally stored style
sheet and an absolute URL and allow me to use my style sheeta but
Dreamweaver MX is not allowing access to absolute URL's.
Can anyone tell me if there is a setting or something I need
to configure within dreamweaver mx to allow it to connect to an
absolute URL style sheet?
Any help appreciated...

DMX cannot display external files. But you could use a
design-time
stylesheet.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"conversionking" <[email protected]> wrote
in message
news:[email protected]...
> Hi, this issue has been causing me some issues and I am
hoping some one
> may
> hold the answer. I have searched high and low but not
able to find the
> answer
> to this...
>
> I have dreamweaver MX, I use a style sheet on an
absolute URL in my
> dreamweaver HTML files as follows.
>
> <link href="
http://mysite/CSS/stylesheet.css"
rel="stylesheet"
> type="text/css">
>
> When I edit a HTML file in dreamweaver that has this
refernce in it I get
> no
> options in my style sheet menu to select my defined
styles in the style
> sheet.
> I know the style sheet works as if I preview this page
in Internet
> Explorer or
> firefox it loads the page and appllys my styles to it so
it looks
> completely
> differnt to what it looks like in Dreamweaver.
>
> I have found if add this link into dreamweaver it works
giving me my
> options
> for my styles so I can format my page and it shows
correctly in
> Dreamweaver.
>
> <link
>
href="file:///Q|/Documents%20and%20Settings/BOBO/Desktop/CSS/stylesheet.css"
> rel="stylesheet" type="text/css">
>
> The only thing that differs from each links is the
location, the one
> stored
> locally works fine but the one on the website will not
work and
> dreamweaver mx
> will not access it.
>
> I then tried the exaxt same scenario in Dreamweaver 8
and using both links
> locally and absolute it works on both links perfectly
fine and I can see
> my
> stlye sheet options. So it seems Dreamweaver 8 is able
to connect to both
> a
> locally stored style sheet and an absolute URL and allow
me to use my
> style
> sheeta but Dreamweaver MX is not allowing access to
absolute URL's.
>
> Can anyone tell me if there is a setting or something I
need to configure
> within dreamweaver mx to allow it to connect to an
absolute URL style
> sheet?
>
> Any help appreciated...
>
>
>

DW CS3 locked files and FTP issues - cannot update pages

I just upgraded to Dreamweaver CS3 and now cant seem to
update any of my web pages. I can connect to the server etc and see
my files locally & remotely but when I try check out a file to
update it I get an error message saying 'index.html is a locked
file and can be viewed but not changed'. All I can do with it is
view it. When I try to unlock any files locally nothing happens????
This was not an issue before I upgraded.....I have checked my
FTP details with a version on my pc and there are exactly the
same.....does anyone know is this an issue with mac version of
Dreamweaver CS3?
Help!!!

Can you post a link to your child or template page and tell
us what you have
changed that didn't propagate?
Here are seven common mistakes that will result in changes
not propagating
from Template to child -
1. Rename the Templates folder
2. Move the Templates folder to some other folder level in
the site other
than root level
3. Move a template out of the Templates folder.
4. Make changes to an editable region of the template (which
will not
propagate)
5. Assume that template changes can be uploaded to the server
without also
uploading the changed local files
6. Corrupt the site cache so that the link between template
and child page
is broken
7, Improperly create your child pages by simply opening the
template,
adding page specific content, and resaving the template with
an *.html
extension rather that its *.dwt extension. (you can tell if
this is the case
by looking at the code on a child page - if you see anything
like <!--
TemplateBeginEditable... then this is what you have done). If
you *have
done this*, then recreate the child pages (in DWCS3) using
FILE | New > Page
from Template, select the template and click CREATE.
The 6th problem can be repaired by using SITE | Advanced >
Recreate Site
Cache, and the six others can be fixed by just not doing
them. Have you
done any of those?
Or, read this -
http://www.adobe.com/go/dd83ba8b
By the way, this is not an official communication vehicle to
Adobe. We are
all just volunteers and peers here.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"gwbusiness" <[email protected]> wrote in
message
news:[email protected]...
> Hi honeybugs,
>
> I am having the same problem and I need a global fix so
that I can
> immediately
> update my site . . . did Adobe help you? This did not
happen immediately
> to my
> files but my template does not now update pages . . . I
am desparate.
>
> Thank you,
>
> Gail
>

Dreamweaver cs5 and PayPal Buttons

Greetings,
My website was created with Dreamweaver cs5. Customers who want to purchase a product from my website simply press the "Add to Cart" button and this takes them to the PayPal checkout.
Here is the problem. If you click on ANY of the add to cart buttons for a particular product, the PayPal add to cart button adds a totally different, random product from my website into the cart. I have had problems with the add to cart buttons before. However, PayPal insisted that this kind of problem might be caused by Dreamweaver.
Every time I need a new "add to cart" button, I create it in PayPal. PayPal generates a code that I then copy and paste into dreamweaver. A customer service representative for PayPal said that the problem might be arising because of a copy and paste issue. He said that dreamweaver sometimes changes things you paste into your code.
Is this true?
How can I fix this?
Thanks in advance.
Regards,
Laila

I, too, have been experiencing similar problems. On PayPal support call earlier in day, I was advised to go to prefs/Code Rewriting/ and uncheck the "Rename form items when pasting" checkbox.
On doing so, I was able to test my problem page, http://www.screamingeagles.com/pages_02/invoiceMail.html and it worked in Safari, Opera, FireFox on two Macs, and Internet Explorer 8 on PC.
Closed all sessions, feeling pretty good about the fix, but on restarting about four hours later, Same Same...well, almost the same. At this point, the first item on the dropdown failed, while the next three, item 2, 3, and 4 choices and prices, worked. They appeared on payment page and reflected the correct prices, but just would not add the first item to the cart.
This prompted another call to PayPal support, and tech advised the same. On responding that I had already done that multiple times, he advised I contact DreamWeaver (Adobe) support as it was out of their scope of responsibility.
PayPal support tech also regenerated my code, pasted it in his text editor, and it worked exactly as I had saved in my "Saved Buttons". So, that again supports that it's a DreamWeaver problem/bug/flaw...insert language as needed.
I can't see any difference in the code itself (although I'm not an expert) so that led me to this post. The only other items within the Rewrite Code prefs that "might" influence it (in my prefs) is that I have checked:
Fix invalidly nested and unclosed tags
Remove extra closing tags
Warn when fixing or removing tags
Never rewrite code:
Special characters:
Encode special characters in URLs using %
Unchecked items:
Rename form items when pasting
URL encoding
On my request, support tech also agreed that this should be escalated at his end to contact Adobe, as we agreed that it was unlikely that I would be the only person running into this problem.
Looking forward to any response,
Thanks,
Joe Satterwhite
SatGraphics.com
ScreamingEagles.com
Message was edited by: Sat Graphics Art
I regenerated the code for the payment button and pasted into Simple Text. The code had the <option value=(1) etc etc lines (on /invoiceMail.html that corresponded to lines 145, 146, 147, 148) indented. I then went into Dreamweaver CS5 code, pasted, and no indent visible.
I manually indented each line four characters in, published, and that change seems to have worked.
Can't say with certainty, but one of those actions worked. (Keeping in mind I had already recreated the PayPal code a few times.)
Hope that helps somebody.

Dreamweaver cs4 spry menus issues with asp

I am having problems using spry menus with dreamweaver cs4
and asp pages. When I inset the spry menus they look fine on the
screen, except when I look at them through a browser the menu is
displayed as in my attachment. This doens't happen with html, so is
there an issue in dreamweaver 4 asp. Can anyone help me with this
one?
Julie

Julie,
Not a asp problem can you post a link or code for the page in
question?
Dave
"JulieThompsonaus" <[email protected]> wrote
in message
news:gqovvm$c0g$[email protected]..
> I am having problems using spry menus with dreamweaver
cs4 and asp pages.
> When I inset the spry menus they look fine on the
screen, except when I
look at
> them through a browser the menu is displayed as in my
attachment. This
doens't
> happen with html, so is there an issue in dreamweaver 4
asp. Can anyone
help
> me with this one?
> Julie
>
> * About Us
> o Our Staff
> o Testimonials
> o Customer Survey
> * Service Requst
> * Recruitment
> o Training
> o Job Descriptions
> o Job Applications
> * Contact Us
>
> c
>
>
>
>
>
>
>
>
> ? Home Carers 2009 Site Map Email Us
>

Dreamweaver 8 and keystroke issues

Similar Messages

Maybe you are looking for