Dreamweaver 8 and table problem.
I have a question about tables in dreamweaver 8. I insert 5
columns and 5 rows. Then i select the last 2 cells in the down
right corner of the table. How can i move the middle line that
exists between the two cells without affecting the other side of
the line on the left? Also, is there an option where i can split
selected cells from a window? Thanks everyone for the help.
Select the cells and look at the lower, left-hand corner of
the Property
Inspector, where you will find incons for merging and
splitting cells.
HOWEVER - it's much better to stack or nest tables than it is
to merge and
split cells. Please read this -
http://apptools.com/rants/spans.php
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"telonios" <[email protected]> wrote in
message
news:ererjj$84j$[email protected]..
>I have a question about tables in dreamweaver 8. I insert
5 columns and 5
> rows. Then i select the last 2 cells in the down right
corner of the
> table. How
> can i move the middle line that exists between the two
cells without
> affecting
> the other side of the line on the left? Also, is there
an option where i
> can
> split selected cells from a window? Thanks everyone for
the help.
>
Similar Messages
-
Dreamweaver CS5 and xampp problem
Hi folks,
i had cs5 trial installed on my last laptop
running vista 32bit
with xampp, i could edit wordpress files
no problem,
but i just got a new laptop
now running windows 7 64bit,
i installed cs5 trial fine and xampp.
I just went to edit wordpress files for the first time
and when i go to index.php as soon as i go to
'discover' i get dreamweaver 'not responding'
and it doesn't respond.
Anybody have any ideas?
Thanks
DanielThanks for the reply,
there was an update for dreamweaver yesterday which fixed my problem,
i don't know why because the update was for browserlab and dreamweaver compatibility or something like that,
but it fixed my problem and now the files load instead of the program (not responding)
so now i'm happy lol.
Daniel
Date: Fri, 21 May 2010 15:10:16 -0600
From: [email protected]
To: [email protected]
Subject: dreamweaver CS5 and xampp problem
Unfortunately I can't help you. But if it's any consolation, you are not alone. I am suffering from same symptom except it happens with any dynamic site I need to work on. And it doesn't matter whether the sites are local or remote.
I am running Windows 7 64bit as well in both of my machines, desktop (AMD) and laptop (Intel), and this happens on both of them and with any dynamic site, Joomla! for instance.
> -
Dreamweaver MX create tables problem
I am using Dreamweaver MX 6.0 and tried to create a table in standard view, but a sharing error message appeared and shut down the program. When I opened again and tried to create the table again, the dialog window didn't even open after clicking on the insert table button. I installed an update to 6.1, but it still didn't work. I have Windows 7 operating system and am wondering if the problem is due to a compatibility issue with an old program and newer operating system??? Any suggestions or help with this problem would be great!
Based on the info. provided, seems to me the value for 'javaee.home' in build.properties may not be correct. Make sure that the property javaee.home in build .properties pints to valid installtion of application server, for ex. if you do 'dir' or 'ls' you should see javadb directory at this location.
Also check if you have a build.properties file under windows user directory (in addition to bp-project under tutorial) and if it points to a different application server installation.
- sreeni -
Dreamweaver cut and paste problem! LAST RESORT!
Hello there people
I am in desperate need of some help, I have exhausted all
other options and I REALLY hope some one on here will be able to
help me!...
I was halfway through an index.html doc when my cut and paste
option stopped working! if you go to edit, all the options are
greyed out! and keyboard shortcuts wont work either! I have tried
opening my other docs and they are all the same!,
Thinking it was a bug I downloaded some updates, I then tried
re-installing, and then removing the WHOLE thing then
re-installing! Ive also looked at windows and there does not seem
to be a problem there either!
Cut and paste works EVERY where else except in DW!
It is looking like maybe I have "selected" some thing, but I
have checked every thing I know and still NOTHING!!
can any one shed any light on this?IVE GOT THE ANSWER!
In Windows, browse to this file:
C:\Documents and Settings\<user>\Application
Data\Macromedia\Dreamweaver 8\Configuration\panelset.xml
Rename the panelset.xml file to panelsetOLD.xml, so that
Dreamweaver will automatically create a new panelset.xml
file. -
Launch and edit problem from Dreamweaver to Fireworks
> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3266405159_588474
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
Hi
Not sure if this is a Fireworks or Dreamweaver problem but
here goes.
I¹ve created a graphic in Fireworks CS3 on the Mac and
Exported the HTML and
related images. I open the HTML file in Dreamweaver CS3, all
fine so far.
Then I highlight the table and click the Edit in
Fireworks¹ button and it
throws up a warning dialogue saying Cannot launch and
edit. The Fireworks
table could not be found in the HTML. Please export from
Fireworks and
re-import the HTML into Dreamweaver.¹
What?!!
I¹ve only just exported it from Fireworks! It¹s
even got the Fireworks table
code in the Code section, so what¹s going here?
Has anyone else had this?
Gaz
--B_3266405159_588474
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Launch and edit problem from Dreamweaver to
Fireworks</TITLE>
</HEAD>
<BODY>
<FONT FACE=3D"Verdana, Helvetica, Arial"><SPAN
STYLE=3D'font-size:12.0px'>Hi<BR=
>
Not sure if this is a Fireworks or Dreamweaver problem but
here goes.<BR>
I’ve created a graphic in Fireworks CS3 on the Mac
and Exported the H=
TML and related images. I open the HTML file in Dreamweaver
CS3, all fine so=
far. Then I highlight the table and click the
‘Edit in Fireworks̵=
7; button and it throws up a warning dialogue saying
‘Cannot launch an=
d edit. The Fireworks table could not be found in the HTML.
Please export fr=
om Fireworks and re-import the HTML into
Dreamweaver.’<BR>
What?!!<BR>
I’ve only just exported it from Fireworks!
It’s even got the Fi=
reworks table code in the Code section, so what’s
going here?<BR>
<BR>
Has anyone else had this?<BR>
<BR>
Gaz</SPAN></FONT>
</BODY>
</HTML>
--B_3266405159_588474--> This message is in MIME format. Since your mail reader
does not understand
this format, some or all of this message may not be legible.
--B_3266407908_747577
Content-type: text/plain;
charset="ISO-8859-1"
Content-transfer-encoding: 8bit
When you export the sliced graphics from Fireworks it places
them into a
table. In my instance the code says...
<!-- fwtable fwsrc="Brands.png" fwpage="Page 1"
fwbase="Brands.jpg"
fwstyle="Dreamweaver" fwdocid = "325827661" fwnested="0"
-->
So it recognises Fireworks was the the graphics app and jumps
back to it
when you want to edit the image. Fireworks then displays (or
should) a
Done¹ button over the window. You do your alts and
press Done to update the
HTML and graphics back in Dreamweaver automatically.
That¹s the only table I was referring to Murray.
On 4/7/07 3:02 pm, in article
[email protected], "Murray
*ACE*" <[email protected]> wrote:
> Why would you be wanting to edit the table in a graphics
editor, instead of
> an HTML editor?
--B_3266407908_747577
Content-type: text/html;
charset="ISO-8859-1"
Content-transfer-encoding: quoted-printable
<HTML>
<HEAD>
<TITLE>Re: Launch and edit problem from Dreamweaver to
Fireworks</TITLE>
</HEAD>
<BODY>
<FONT FACE=3D"Verdana, Helvetica, Arial"><SPAN
STYLE=3D'font-size:12.0px'>When =
you export the sliced graphics from Fireworks it places them
into a table. I=
n my instance the code says...<BR>
<BR>
<!-- fwtable fwsrc=3D"Brands.png"
fwpage=3D"Page 1" fwba=
se=3D"Brands.jpg"
fwstyle=3D"Dreamweaver" fwdocid =3D "32=
5827661" fwnested=3D"0"
--><BR>
<BR>
So it recognises Fireworks was the the graphics app and jumps
back to it wh=
en you want to edit the image. Fireworks then displays (or
should) a ‘=
Done’ button over the window. You do your alts and
press Done to updat=
e the HTML and graphics back in Dreamweaver
automatically.<BR>
That’s the only table I was referring to
Murray.<BR>
<BR>
On 4/7/07 3:02 pm, in article
[email protected], "Murr=
ay *ACE*"
<[email protected]> wrote:<BR>
<BR>
<FONT COLOR=3D"#0000FF">> Why would you be
wanting to edit the table in a =
graphics editor, instead of <BR>
> an HTML editor?<BR>
</FONT></SPAN></FONT>
</BODY>
</HTML>
--B_3266407908_747577-- -
Copy and Paste Problem in Dreamweaver CS5.5
Hi All,
I saw the posts for Dreamweaver CS4 for copy and paste problems. I tried all the suggestions but to no avail. My copy and paste would not work. Then I found what worked for me...
I went to Edit --> Keyboard Shortcuts --> and I changed from "Dreamweaver Standard" to "Dreamweaver Mx2004". For the moment, it is working. I am on XP Professional.
From the other posts the suggestions were...
Switch to Classic Mode
Delete the Configuration file
Uncheck "Enable related files"
It was a problem for sure, and hopefully I won't be back for this one :-) Good luckHello,
The problem has been solved by over writing the � font.properties � file in jre/lib/� .
The changes given as follows:
# Exclusion Range info.
# exclusion.dialog.0=0500-20ab,20ad-ffff
# exclusion.dialoginput.0=0500-20ab,20ad-ffff
# exclusion.serif.0=0500-20ab,20ad-ffff
# exclusion.sansserif.0=0500-20ab,20ad-ffff
# exclusion.monospaced.0=0500-20ab,20ad-ffff
That is, we comment the lines having Red foreground color. -
Problem with Indesign CC 2014 and tables
Problem with Indesign CC 2014 and tables. The text rearranges itself when I delete or add something in a table; the footnotes to the text associated with the overlap even getting unreadable. Just click on the chain symbol in the window and everything is fine. Why?
try circumventing your cc app and see if that helps:
if you follow all 7 steps you can directly download a trial here: Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release | ProDesignTools
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version. -
Bullet problem when creating text frames and tables in InDesign CS5
Every time I create a new text frame or table in InDesign CS5 and paste information there, the first row in the table or several lines of text come out with bullet points. I'm sure this is a setting or style at some point I created and now am unsure of how to delete. I would like the new text frames and tables to not include bullet points as a default when imported or pasted. Any thoughts? Thanks!
Defaults for text in the current document are made with no text selected. Turn off bullets and they should stay off (but check the styles, too, you might have accidentally set a bulleted style as the defualt and you should change the default style instead). If this is happening in all files, you need to do it with nothing open to reset the default for all new documents (existing files, unfortunately, need to be fixed one at a time).
-
SWF problem in Dreamweaver CS3 and strange Script file
Hi folks, I am using Dreamweaver CS3 and tried to upload a
SWF file today. The SWF includes three buttons, one for video,
another for audio and one for text. Before loading up to DW all
three parts played fine. But when I uploaded to DW and my site, the
video fails to play. A Script file, and another file downloaded I
am not sure what I am supposed to do with this script file. The
script file is called The audio and text part works fine, but the
video will not play. I am not sure why this is, but when I uploaded
the file to Dreamweaver there was a Script file called
AC_RunActiveContent.js that automatically downloaded along with a
file called .htaccess
The other file is called called .htaccess
I uploaded both files to my server, but that did not help the
video play. I tried pasting the AC_RunActiveContent.js code into my
page and uploading, but that did not help the video play either; I
just got code at the bottom of my page.
I have viewed the page in Mozilla, IE7 and Flock, but still I
cannot play the video.
Does anyone have any idea how to make the video play in
Dreamweaver; what I am supposed to do with these two code files?
For those interested in the AC_RunActiveContent.js code, I
will post below. Please try to explain simply because I am not so
tech savvy.
I thank you all.
MaryI have managed to fathom it out.
-
Hey all:
I'm obviously new to Dreamweaver MX, and I've been having
quite a problem with my banner at the top of my site. Using
photoshop, I made a banner and tried to put it at the top of my
site. However, when I inserted the image, the image doesn't fit and
leaves a white space around the image...it doesn't fit into the
table. So what I had to do is make the background color in that
specific cell black so it looks like the entire banner fit into the
table. But I want to change the banner so it's a better designed
image, but I know that no matter what I do, the image will not fit
the cell perfectly. How can I do this?
The site is: www.tudortastic.com
Thanks!
-HA table cell will expand to exactly contain an inserted image
assuming
the table's cellpadding and cellspacing are both set to zero
and you
have not specified an oversized height or width.
"HappyHelen" <[email protected]> wrote in
message
news:eksu5e$4n6$[email protected]..
> Hey all:
>
> I'm obviously new to Dreamweaver MX, and I've been
having quite a problem
> with
> my banner at the top of my site. Using photoshop, I made
a banner and
> tried
> to put it at the top of my site. However, when I
inserted the image, the
> image
> doesn't fit and leaves a white space around the
image...it doesn't fit
> into the
> table. So what I had to do is make the background color
in that specific
> cell
> black so it looks like the entire banner fit into the
table. But I want
> to
> change the banner so it's a better designed image, but I
know that no
> matter
> what I do, the image will not fit the cell perfectly.
How can I do this?
>
> Thanks!
> -H
> -
I am actually really new to Dreamweaver MX, so I am not sure
what I am doing wrong.
At first , I did open that " Insert Table" icon, and filled
out following values( Rows, Columns..),then Navigated to hard drive
folder and selected a logo picture, but when I
clicked OK, it gave me mistake message, it said not allowing
to share files ??? And it closed the table dialog and the programm
itself. So since then I cant open that " Insert Table" icon. Icon
is actually active and I am not on Layout view. Does anybody know
about that" sharing files" problem and how can I fix my problem?
Thank you very much!Dreamweaver MX? Wow - that's old.
Can you tell us the version #?
On a PC, go to Program Files/Macromedia/Dreamweaver MX/ and
find the
dreamweaver.exe file. Right click, choose Properties, and
then click on the
Version tab - the version number is towards the top of that
tab, like
On a Mac, get info on the Dreamweaver App, and I believe it's
right on that
panel.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"krestik_2" <[email protected]> wrote in
message
news:fn9ges$btg$[email protected]..
>I am actually really new to Dreamweaver MX, so I am not
sure what I am
>doing
> wrong.
> At first , I did open that " Insert Table" icon, and
filled out following
> values( Rows, Columns..),then Navigated to hard drive
folder and selected
> a
> logo picture, but when I
> clicked OK, it gave me mistake message, it said not
allowing to share
> files
> ??? And it closed the table dialog and the programm
itself. So since then
> I
> cant open that " Insert Table" icon. Icon is actually
active and I am not
> on
> Layout view. Does anybody know about that" sharing
files" problem and how
> can I
> fix my problem?
> Thank you very much!
> -
I'm using this Coffeecup free dhtml menu creator and I've
found that it generates its code in an absolute format. This is a
problem for be because I've generated my entire site in Dreamweaver
8 using tables and I need to control exactly where my dhtml menu is
located. When I paste my code into the table code section and
preview in IE6, the table does not wrap the location of my dhtml
menu and it gets stuck in the top left corner of the browser. Is
there any good dhtml software that generates code in a relative
format - or is there a way to control exactly where my absolute
table is placed within the browser? Thanks!Update: I inserted an iframe into my document to hold the JS
code, while allowed me to maneuver the menu as I pleased. Only
problem now, is IE and FF render differently, see here:
Here is what it looks like in IE6:
[IMG]http://img165.imageshack.us/img165/7179/21za.jpg[/IMG]
Looks good. Now, here is what I'm dealing with in Firefox
1.5:
[IMG]http://img445.imageshack.us/img445/8324/untitled8yc.jpg[/IMG]
Basically what I have is a grey bar on a redish background.
As you can see, the js menu fails entirely to overlap the red bar
in FF1.5, yet it does what its supposed to in IE6. Same effect on
multiple machines.
Here is the relevant source of the index.html file:
[code]
<table width="780" border="0" align="center"
cellpadding="0" cellspacing="0">
<tr>
<th height="9" bgcolor="#BF4F40" class="mediumgreen"
scope="col"></th>
</tr>
</table>
<table width="780" height="25" border="0" align="center"
cellpadding="0" cellspacing="0">
<tr>
<th width="780" height="25" bgcolor="#99A4A0"
scope="col"><iframe scrolling="no" width="778" height="25"
SRC="hello.html" frameborder="0"></iframe>
</th>
</tr>
</table>
[/code]
Any reason why FF won't render the menu but IE will? -
MIGO tr Serial number field and table?
Hi guys,
can anybody tell me how to find the field name and table for Serial number in MIGO tr Code?
in MIGO the Serial number field and Structure are GOSERIAL-SERIALNO.but i was not able to find the Actucal Field name and table where i can get the values based on PO and Asset Number's?
Thanks,
Gopi.Hello,
I'm looking at the same problem here. I found the table SER03 in which you can enter the the material document. This returns 1 line in this table and from this one you need the OBKNR element
You can copy this data and paste it into table OBJK element OBKNR and this returns all serialnumbers for the relevant material document.
My problem is that i can't get these items on the sapscript. (WESCHEINVERS 1,2 or 3)
Greetings
Edited by: Lode Vandecruys on Apr 9, 2008 11:04 AM
Edited by: Lode Vandecruys on Apr 9, 2008 11:09 AM -
Reg:field and table name
Hi Guys,
I am developing one report for knowing the recognised amount ,but i am not able to get the field and table name .In system it is showing that VBRAV51HD:RVAMT_REAL_G.But this is a structure,how to get a field name for recognised amount.Please help.
Thanks & Regards,
Sash.Hi sash,
I think u need to some R n D upon it. First take the structure and open it in SE11. Then try to find out what all tables does the structure comprises of. Then try finding the relevant fieldname of the table( which is also existent in the structure) getting accessed when the field is triggered. That may solve your problem. try finding the objective of your structure being shown.
Abhijit -
Performance and Contention problem with the database ?
Hello!
I am having one database which is used by around 95 thousand
users.Database contain about 4 lakh records. The database is
going smooth and perfect.
The problem(perfomance is slow and there is contension too) came
when i made 4 web applications which contain atleast 1000 hits
(1000 records are inserted in the database ) per day.
Now the db is not going so smooth(contention and performance
problem).
I think this is happening becuase of those 4 web applications.
So should i make new database for that 4 applications or i need
to get the new system for it or there is another way through i
can tune my running database.
Any help will be appreciated.
Regards
SeemabHi,
If i well understand, u have one database and u insert 4000 rows
per day and u have performance problem ?
I think u have a big problem cause it's not really a big
intensity on a base. So u should have big problems on ur
database design such as undersized memory area, bad disk
repartition, bad types of indexes or something like that.
To decrease the contention, u should separate ur data and index
datafiles over differents disks and specialize tablespace by the
granularity of the table.
But u r not enough precise to expect a precise answer; could u
be more precise ? as the server u have, data volumes, a select *
from v$system_event, etc...
Good Luck,
Fred DENIS
Maybe you are looking for
-
Application is not working in Different environments
Hi Experts, I am working in jdev 11.1.1.3.0 with ADF BC I have deployed my application in 1 environment it's working fine, the same application i depoyed in another environment it's not working. in the log i am getting as <Started WebLogic Managed Se
-
I just bought a new Macbook Pro with OSX Lion 10.7.2. I had a 2009 Macbook and I migrated all the information from that notebook to my new one. I used a G-Drive External Hard Drive, and the migration seemed to have worked perfectly. At first every
-
Where are my photos from my old phone? They were backed up in iCloud.
I got a new iPhone 4S and my old photos were backed up on the icloud. Now I cannot find them on my new phone (same model), but under "manage storage" in settinngs, it shows both my old phone and my new phone data. Please help me access my old photos!
-
FICO implementation in a courier service industry
Hi everyone, I want to know the experience of anyone who has done FICO implementation in a courier service industry. Please give me a detailed scenario of why and what all was done in the project. I will deeply appreciate your help
-
Service / Material Long text Repetation in PO Print,
Dear ALL, I have a requirement where in the Service activities do have a Long text going up to 1 or 2 paragraphs, these long text gets printed in the POs getting created using this service activities, but we mainly have many service activities having