Dreamweaver 8 and Windows 7 64 bit no Server Debug
I have DW8 up and running but I can't get the Server Debug to work for Coldfusion.
Has anyone been able to get this working?
I have not run the older version of DW with Windows 7, but if the feature is not working it is a possibility that it is due to the out-of-date Dreamweaver. Adobe's policy only allows users to upgrade from the previous 3 versions. So for you Dreamweaver CS5 is the last chance you have to upgrade. Once CS6 goes on sale, you will be forced to pay the full retail cost for the application again. If you are having problems I would recommend downloading the demo of CS5 and see if it is working. Different versions can be installed side-by-side. The only restriction is that you cannot run the old and new versions at the same time. If the problem is fixed, it is likely an incompatibility and upgrading is the only solution. If the problem is not fixed, please repost.
Similar Messages
-
What is difference between 32 bit and 64 bit sql server memory management
What is difference between 32 bit and 64 bit sql server memory management
Thanks
ShashikalaThis is the basic difference...check if helps:
A 32-bit CPU running 32-bit software (also known as the x86 platform) is so named because it is based on an architecture that can manipulate values that are up to 32 bits in length. This means that a 32-bit memory pointer can store a value between 0 and
4,294,967,295 to reference a memory address. This equates to a maximum addressable space of 4GB on 32-bit platforms
On the other hand 64-bit limit of 18,446,744,073,709,551,616, this number is so large that in memory/storage terminology it equates to 16 exabytes. You don’t come across that term very often, so to help understand the scale, here is the value converted to
more commonly used measurements: 16 exabytes = 16,777,216 petabytes (16 million PB)➤ 17,179,869,184 terabytes (17 billion TB)➤ 17,592,186,044,416 gigabytes (17 trillion GB)➤
As you can see, it is significantly larger than the 4GB virtual address space usable in 32-bit systems; it’s so large in fact that any hardware capable of using it all is sadly restricted to the realm of science fiction. Because of this, processor manufacturers
decided to only implement a 44-bit address bus, which provides a virtual address space on 64-bit systems of 16TB. This was regarded as being more than enough address space for the foreseeable future and logically it’s split into an 8TB range for user mode
and 8TB for kernel mode. Each 64-bit process running on an x64 platform will be able to address up to 8TB of VAS.
Please click the Mark as answer button and vote as helpful if this reply solves your problem -
Dreamweaver and Windows Vista Problem
Hello,
I ran into a problem with my Dreamweaver - 8 application and
cannot find a fix. I open up the Dreamweaver application, 2-3
seconds later, I get the following error message, “A problem
caused the program to stop working correctly, windows will close
the program and notify you if a solution is available.” I am
using Windows Vista and believe the problem is associated with the
Vista operating system. I am puzzled by the fact that I have been
using Dreamweaver with Vista and have had no problems up until now.
I uninstalled & reinstalled Dreamweaver to no avail. I
restored my computer to an earlier date, and updated Dreamweaver,
and still have the same problem.
Any help to resolve this problem would be greatly
appreciated.
Steve
Text
TextHello Again,
I finally fixed the problem. I went into my network settings
and reset my network address. This did the trick, I went back and
opened up Dreamweaver without any problem.
Steve -
Warning: Palm OS Treos and Windows Small Business Server 2008
If you use a Treo smartphone with the Palm operating system, beware: it does not work with Microsoft Windows Small Business Server 2008.
Palm acknowledges this failure and has no intention of fixing it.
There are at least two problems:
(1) You must turn off all email security on the Exchange mail server to sync with Treos.
(2) AutoSync locks up the Palm each time it occurs, and must be turned off.
Here's the transcript of my chat w/tech support. After this, I spent a few hours on the phone and got the same answers.
[12:35 AM] Gary says: Hello.
[12:35 AM] Handoff connection active (1/5140).
[12:35 AM] x says: Hi. Please see the question sent earlier.
[12:36 AM] Gary says: Could you please be more specific about the issue?
[12:37 AM] x says: Our Palms will not talk to Exchange Server 2007 unless all its security
features are turned off. This is a problem with Palm/VersaMail. When will it be corrected?
[12:38 AM] Gary says: Yes, that is true. I am sorry for the inconvenience this may have caused.
[12:38 AM] Gary says: I am very sorry to inform you that currently we do not have any information on this.
[12:39 AM] x says: Apology accepted and appreciated. But when will this be fixed?
[12:40 AM] Gary says: Unfortunately we do not have any sort of update on this. I suggest you to post the
feedback in the Palm Website.
[12:41 AM] x says: Okay, next question: Every AutoSync locks up the Palm, so we have to turn
AutoSync off. Do you intend to rectify this problem?
[12:42 AM] Gary says: I understand your concern. Is it happening with all the Palm devices?
[12:42 AM] x says: Yes.
[12:43 AM] Gary says: Do you receive any error message before locking up the Treo?
[12:43 AM] x says: No.
[12:46 AM] Gary says: Okay, as this happening with all the devices to me it looks like the issue should be
diagnosed closely to find the root cause. Was this happening with the Exchange Sever 2003?
[12:46 AM] x says: No
[12:46 AM] Gary says: So, the AutoSync feature is Locking the device from the day you upgraded to the
Exchange Sever 2007.
[12:46 AM] Gary says: Am I correct?
[12:47 AM] x says: yes.
[12:48 AM] Gary says: Okay, as this is the issue related to the sync with the Exchange Server 2007 and the
AutoSync to find out the root cause I will escalate this issue to our escalation channel which is our Voice
Support Team.
[12:48 AM] Gary says:
I will provide you all the information and guide you in the correct direction to address this issue.
[12:48 AM] Gary says:
I suggest you to get in touch with the Voice Support and I am sure they will fix the issue.
[12:49 AM] Gary says:
I will provide you a Service Request, when contacting the Voice Support, provide this Service Request Id and you will get a free Technical Support.
[12:51 AM] Gary says: Please provide me your Last name, First name, complete address, phone number,Email address, date and place of purchase of device and serial number of the device to create a Service Request Number.
[12:51 AM] x says: Of course I provided all this when I logged in, but here it is again:....
[12:54 AM] Gary says: Thank you for providing all the information.I need 5 minutes to register the device and create a Service Request.
[12:55 AM] x says: Thanks for your help, and confirmation of the incomprehensible failure to support Exchange Server 2007. We're this close to dumping these things if this is the kind of tech support Palm intends to provide.
[1:00 AM] Gary says: Thanks for staying on hold: I am sorry for the delay. I can understand the inconvenience you are facing.
[1:01 AM] Gary says: Based on the information you provided, I created a service request for you in our database. The Service Request number is : 1-51558238041
[1:01 AM] x says: Will I get an email?
[1:01 AM] Gary says: Using this service request number, you need to contact our Voice Support department. Voice Support Department number is 877-426-3777. Voice support will be available from 5:00AM to 9:00PM (PST) on weekdays and from 8am - 5pm PST on weekends.Please note down the above given Service Request Number and Voice Support Number or else you will lose this information once the chat session is closed.
[1:02 AM] Gary says: Yes, I will email this chat session to you.
[1:02 AM] Gary says: Is there anything else I can assist you with today?
Post relates to: Treo 755p (Sprint)The problem is the default security profile isn't compatible. You can go into the Power shell command line and remove the default activesync mailbox policy.
Post relates to: None -
Two Asa Two Isp and Windows 2008 R2 Server
Hello Everybody ,
If you can support my issue , I do appreciate a lot.
First of all thanks a lot for your interest ..
Here is my issue :
I have two Isp Connection ( 1 metro Eth Connection and 1 Ghdsl Connection )
1) Asa 5505 (Version 8.0(5)) is for the 1.st Isp Connection
Windows 2008 R2 server is up and running as Web Server on this ASA 5505 config.
As:
(static (inside,outside) mywebsrv.mycompany.com 192.168.5.5 netmask 255.255.255.255
And Ipconfig of W2008Srv is 192.168.5.5 255.255.255.0 192.168.5.1 (Gateway ASA 5505)
2) Asa 5510 (Version 8.0(5)) is for the 2.nd Isp Connection
Windows 2003 R2 server is up and running as Ftp Server on this ASA 5510 config.
As:
(static (inside,outside) myftpsrv.mycompany.com 192.168.50.10 netmask 255.255.255.255
And Ipconfig of W2003Srv is 192.168.50.10 255.255.255.0 192.168.50.1 (Gateway ASA 5510)
Here is my question :
I need to move my Ftp server (due to old hardware + old server issues )
into the Windows 2008 R2 Server ( HP DL Server with 4 Nic).
If I conect my Asa 5510 to the second nic of Windows 2008 R2 Server.
and give an ip address as 192.168.50.10 255.255.255.0
what should be the gateway Ip address : ?
Before I go ahead and implement :
a) What do I need to do on the Windows 2008 R2 Server
as persistent route adds with different metrics
b) Any config adds or changes on Asa 5505 and ASA 5510 regarding static routes with
different metric and so on ...
Many thanks in advance for your support .If you do that, the second interface will work as a failsafe for the first NIC.
As far as i know, you won't be able to route traffic based on the type of traffic nor do load-balancing between the interfaces.
I guess the best approach will be to get a newer server and use it as a replacement for the one running 2003 R2. -
Mac OS X 10.5.7 as VNC server and Windows as VNC server
Hi,
I try to enable screen sharing from Mac OS X as VNC server and we would like to use a Windows client as VNC client.
I try to anable it from system pref., set the password, ecc.
When I insert VNC password from Windows, VNC send me this message.
read: Connection aborted (10053)
Have you got any advice?
If I use Windows as VNC server and Mac 10.5.7 as client all works fine.
Windows Vista SP1, RealVNC VNCviewer 4.1.3 free edition.
Thank you
Regards.
Ganimede Dignan.Re: Ganimede Dignan
Re: justinvallon
I have found that if a 3rd party client is not happy with the Mac OS X VNC server, then switching to the Vine Server (aka OSXvnc) often times does the job. Vine Server is a free download:
<http://www.versiontracker.com/dyn/moreinfo/macosx/16699> -
Difference between windows server 2008 and windows small buisness server
dear,sir/madm
i need a differeces between windows small buisness server and winndows server 2008.
plz get me perfect answer
regards,
AbhilashHello,
main difference are that SBS is limited to 75 users and not able to create a trust. Also it comes with additional software like Exchange and SQL depending on the license you use.
The regular server version do NOT contain any application or server as SBS. This must be bought separate. Also there is no user limit and tursts are allowed.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights. -
OS X Leopard and Windows 2008 file server mount_smbfs
Hello
I am unable to use the command mount_smbfs to mount a share on a Windows 2008 file server in OS X 10.5.8 Leopard.
Here is what I am trying to do:
I have a Mac Mini running OS X 10.5.8 that is joined to a Windows 2003 Active Directory domain. I also have a stand alone Windows file server running Windows Server 2008.
I want to mount a share on the Windows 2008 file Server using the command line and not Finder. I do have a reason for wanting to do this which I wont bore you with.
On the Mac Mini, I log in with an Domain account that has permission to access the file shares on the Windows 2008 file server. In Terminal I do the following:
cd /Users/username
mkdir mountpoint
mount_smbfs //windows2008server/fileshare /Users/username/mountpoint
This command should mount the share "fileshare" hosted on server "windows2008server" in the folder "mountpoint" on the Mac Mini.
Here is the problem:
When I execute this command, I get:
Password: so I put in my password
then I get:
mount_smbfs: mount error: /Users/username/mountpoint: Broken pipe
Analysis of the problem:
I tried exactly the same commands to mount a share on a Windows 2003 file server. I am not asked for my password and the share mounts perfectly. I also tried the same command in OS X 10.6 to mount a share on a Windows 2008 file server, again, I was not asked for my password and the share mounted perfectly.
So the problem is only mounting Windows 2008 file shares using mount_smbfs in OS X 10.5.8. I am not sure quite what is going wrong here, as the Mac is joined to the domain, it is granted a Kerberos ticket so should not be asking for my password. Is this a known bug in OS X 10.5? Is there a fix/workaround for it?
Many thanks
Richard.Not sure what user the mount command defaults to. You may want to specify your user name in the mount command (you can also specify the password). Try using this:
mount_smbfs //username@windows2008server/fileshare /User/username/mountpoint
Of course substituting the Windows 2008 account name you are mounting with for the username.
Cheers,
Dave -
How to setup ftp with dreamweaver and windows server 2003
Does anyone know if there is a tutorial/article on settinp up Dreamweaver cs3 to use Windows server 2003 as an FTP server...
any assistance would be greatly appreciated...I was able to figure out how to setup the ftp connection, connect to my home server, however,whenever i tried to upload the contents of my website to my server, nothing gets uploaded to the site. I tried putting one page at a time, nothing. tried everything, and still no joy. I can see everything on my local server which is a XAMP package, but nothing on my remote server. Do i maybe need to maybe have a WAMP or XAMP on the Windows Server 2003 or that should not matter. This is new to me so i am learning as i go along.
Another thing, i was able to create a subfolder in my c:\www.ftproot folder, i can see that folder on my local machine, i'm just not seeing the files in that folder when i do my 'put' with my files. -
Is Dreamweaver CS6 compatible with Windows 8?
Hi,
Yes it is compatible with Windows 8. You can check the system requirements from the link below.
http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-dreamweaver.html#mai n_Dreamweaver_CS5_5_system_requirements
Thanks
Kapil -
Dreamweaver and windows 7 Home Premium
Here's what I do: I open up "Data files for Students" in the files menu and right-click on "Data files for Students" and create a new folder and name it "carolynes_creations". then I go to Site and click New, Advanced and create "Carolyne's Creations". then i browse to "data files for students" and click on "carolynes_creations" and it will not create the site. When I click on "data files for students" and it creates a path called "c\data files for students\". in order to create the site i have to type in at the end of that path \carolynes_creations making it "c\data files for students\carolynes_creations\" then it will create the Site
After I create Site-Carolyne's Creation i then right click on it and create a folder and name it "assets"....then i go to Manage Sites click Edit then browse to set "assets" as the default image folder dreamweaver doesn't recognize that "assets" is the image folder and will not set it as "default image folder".
Anyone have a issue like this? and how did you resolve it.
loohye1042It's a well know bug. Workaround is to type the name of the folder or to create a dummy folder one level down.
-
JRE 1.7.0u51 and Windows 2008r2 Terminal server
Hi all.
I've recently installed JRE 1.7.0u51 on one of my terminal servers but cant get it to run. If I try to access pages with Java scripts as a normal user I promtply get an error telling me I dont have Java, however I am able to open/edit the Java config. panel, if I open the same pages as my admin user, java Works fine.
I placed the server in install mode, and installed JRE 7.51 (removed earlier version prior installing). If I downgrade to JRE 7.45 everything Works fine.
I have also configured sitelist and sec. Level through this config: Deployment Configuration File and Properties
Anyone out there have any experience in this issue?
RBYou might start here http://forums.adobe.com/community/acrobat and select the server forum for Windoze
-
How to Install OPS on Windows 2000 Advance Server??
I just try to install Oracle Parallel Server on Win 2000 Advance
server, but it seems that the installation is not success.
I am using 2 Compaq Proliant ML530 PIII/Xeon as a hardware and
Windows 2000 Advance Server for Operating System.From the
vendor's tools checking, it stated thad clustering service is
already installed (ok!)
When I install Oracle Parallel Server, the default drive for
installation is already drive V (share disk), and Oracle
Parallel Server has been selected on the available product
components page, but I don't see node selection for install.
(According to Installing and Creating an Oracle Parallel Server
Database manual, I must select the nodes to which I want to
install the software from cluster node selection screen page)
Also when creating database (using Oracle database configuration
assistant), it does not displays database creation selection
(OPS or single instance configuration)as the first page, but
directly go to the second page (create/delete database).
Is the problem caused by wrong step of oracle Installation or OS
itself (ie: Cluster Manager)??
Anybody have experience on it can help me?
ps:I am using Oracle 8.1.7
Regards,
SuryantoPlease check whether you have installed the OSD layer (
Operating system dependent layer). Such layer can be obtained
from your hardware vendor ( eg compaq). You should have such
layer in your system before installing the OPS.
If you have such layer installed, you can see other nodes during
installation of Oracle and OPS.
Hope this help! -
Loop Through Excel Files and Load into SQL Server Table
I'm following the example here.
https://www.youtube.com/watch?v=_B83CPqX-N4
I'm pretty sure I did all the steps, but for some reason my project is not running. I'm thinking there is a 32-bit or 64-bit issue lurking in here somewhere.
Here's my error message.
SSIS package "C:\Users\Ryan\Documents\Visual Studio 2010\Projects\Loop through Multiple Excel sheets and load them into a SQL Table\Integration Services Project1\Package.dtsx" starting.
Information: 0x4004300A at Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Error: 0xC0209303 at Package, Connection manager "Excel Connection Manager": The requested OLE DB provider Microsoft.ACE.OLEDB.12.0 is not registered. If the 64-bit driver is not installed, run the package in 32-bit mode. Error code: 0x00000000.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040154 Description: "Class not registered".
Error: 0xC001002B at Package, Connection manager "Excel Connection Manager": The 'Microsoft.ACE.OLEDB.12.0' provider is not registered on the local machine.
For more information, see http://go.microsoft.com/fwlink/?LinkId=219816
Error: 0xC020801C at Data Flow Task, Excel Source [2]: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "Excel Connection Manager" failed with error code 0xC0209303.
There may be error messages posted before this with more information on why the AcquireConnection method call failed.
Error: 0xC0047017 at Data Flow Task, SSIS.Pipeline: Excel Source failed validation and returned error code 0xC020801C.
Error: 0xC004700C at Data Flow Task, SSIS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at Data Flow Task: There were errors during task validation.
SSIS package "C:\Users\Ryan\Documents\Visual Studio 2010\Projects\Loop through Multiple Excel sheets and load them into a SQL Table\Integration Services Project1\Package.dtsx" finished: Failure.
The program '[5392] DtsDebugHost.exe: DTS' has exited with code 0 (0x0).
I have 32-bit Excel and 64-bit SQL Server. Is that the issue? Can someone tell me what's wrong here?
Thanks!!
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it.Sa-weeettttttt!! Thanks. I figured that's what it was. For the benefit of others, this link shows you exactly how to make the modification recommended above.
http://help.pragmaticworks.com/dtsxchange/scr/FAQ%20-%20How%20to%20run%20SSIS%20Packages%20using%2032bit%20drivers%20on%2064bit%20machine.htm
Knowledge is the only thing that I can give you, and still retain, and we are both better off for it. -
Oracle client 32/64 bit on Crystal Server 2013 and Windows Server 2012
I'm getting the error "Unknown Database Connector Error" when I run report on the server and it works OK on crystal designer 2013.
Been reading this thread 32&64 bit Oracle Client but not much help there.
Here are the details
System
Windows Server 2012
Crystal Server 2013 SP5
Crystal Server has been installed and appears to work fine. I was able to develop a brand new report locally and saved it to the server and it displays ok. Of course when I click on refresh on the report, it will error out due to database connection it looks like.
We have installed both oracle client drivers 64 and 32. 64 was installed first and then 32.The path has been modified so that the 32 shows up first.
I even ensure oracle_home and oracle_home32 are specified and restarted the server. I still get the same error.
The tns entries are also located in both installs of oracle client...
What might be the issue?Oracle Database Client 12.1.0.2.0 (32-bit and 64-bit installed)
Installation Type: Custom
COMPONENTS INSTALLED:
SQLPLUS
ORACLE NET
We are currently not using an ODBC connection.
We installed Crystal 2013 Server SP05. This is the sole package installed (believe it's the latest version) without any extra patch package installed (believe no patch needed as it's the latest version).
Maybe you are looking for
-
Design advice for vertical list calculations
I'm extending a product management life cycle sharpoint 365 site, With purchase orders, magazine store, production targets (date based) and sold dates. So that in our production environment we can see how much is stored, how much can be sold, and wha
-
SCCM report says 17 patches are needed, but they are not needed
Another weird one. I've had this before with just 1 patch needed but never figured it out. But now I have a Server 2012 box (SCCM 2012 R2 CU4) that report "Compliance 5 - Specific computer" says need 17 patches. Software Center on the box says none a
-
Any way to have email address of the user in user level analysis report?
Hi, Is their any way to get the users email address column in User Level Analysis report Result..?? Any way or settings to add custom columns or the email address column in the displayed columns of the report ??
-
Breakdown of 'show sticky database' - ACE
I need assistance to interpret the show sticky database response. What does the sticky entry value resolve to. I have set the stickiness on source and destination addresses. Is it possible to identify from show sticky database that which is the sourc
-
Declaring check box flag in export paramter functino module
how to declare check box flag in export paramter functino module