Dreamweaver 8 and windows 7 problem

can anyone help please.
I recently transfered Dreamweaver 8 onto a new pc (windows 7) and find that the program keeps crashing on start up.
I've tried running the various DW compatibility options but with no success.
If anyone has experienced this problem or knows a solution I would love to hear from them.
Thank you

If your crash message start with "1. Failed to install IS Kernel file" then
you can do following:
Go to the "Program Files\Macromedia\Dreamweaver 8" folder.
Double Click Dreamweaver.exe.
If your porgram now starts correctly, make a link to the Desktop.
If you wish you can copy the link to the All Programs menu too.

Similar Messages

  • Dreamweaver and Windows Vista Problem

    Hello,
    I ran into a problem with my Dreamweaver - 8 application and
    cannot find a fix. I open up the Dreamweaver application, 2-3
    seconds later, I get the following error message, “A problem
    caused the program to stop working correctly, windows will close
    the program and notify you if a solution is available.” I am
    using Windows Vista and believe the problem is associated with the
    Vista operating system. I am puzzled by the fact that I have been
    using Dreamweaver with Vista and have had no problems up until now.
    I uninstalled & reinstalled Dreamweaver to no avail. I
    restored my computer to an earlier date, and updated Dreamweaver,
    and still have the same problem.
    Any help to resolve this problem would be greatly
    appreciated.
    Steve
    Text
    Text

    Hello Again,
    I finally fixed the problem. I went into my network settings
    and reset my network address. This did the trick, I went back and
    opened up Dreamweaver without any problem.
    Steve

  • A720 and windows 8 problems

    Im trying to setup the a720  with windows 8 and have this problems: When power off the computer have all time this BSOD : SESSION_HAS_VALID_POOL_ON_EXIT Touchscreen not work.
    If I run the windows 8 install, just for test, the touch is working, the problem is after install.
    External hard disk not working when connect to any USB port, and unplug result in a system freeze.
    Here my mini dump for error SESSION_HAS_VALID_POOL_ON_EXIT, I have the i5 model too and this not happen on that model:
    Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com) Online Crash Dump Analysis Service See http://www.osronline.com for more information Windows 8 Kernel Version 9200 MP (8 procs) Free x64 Product: WinNt, suite: TerminalServer SingleUserTS Built by: 9200.16384.amd64fre.win8_rtm.120725-1247 Machine Name: Kernel base = 0xfffff800`60081000 PsLoadedModuleList = 0xfffff800`6034ba60 Debug session time: Wed Nov 28 17:08:03.203 2012 (UTC - 5:00) System Uptime: 0 days 0:00:13.897 ******************************************************************************* *                                                                             * *                        Bugcheck Analysis                                    * *                                                                             * *******************************************************************************
    SESSION_HAS_VALID_POOL_ON_EXIT (ab) Caused by a session driver not freeing its pool allocations prior to a session unload.  This indicates a bug in win32k.sys, atmfd.dll, rdpdd.dll or a video driver. Arguments: Arg1: 0000000000000001, session ID Arg2: 00000000000000f0, number of paged pool bytes that are leaking Arg3: 0000000000000000, number of nonpaged pool bytes that are leaking Arg4: 0000000000000001, total number of paged and nonpaged allocations that are leaking. nonpaged allocations are in the upper half of this word, paged allocations are in the lower half of this word.
    Debugging Details: ------------------
    TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
    CUSTOMER_CRASH_COUNT:  1
    DEFAULT_BUCKET_ID:  WIN8_DRIVER_FAULT
    BUGCHECK_STR:  0xAB
    PROCESS_NAME:  csrss.exe
    CURRENT_IRQL:  0
    LAST_CONTROL_TRANSFER:  from fffff80060680506 to fffff800600fc040
    STACK_TEXT:  fffff880`05d059b8 fffff800`60680506 : 00000000`000000ab 00000000`00000001 00000000`000000f0 00000000`00000000 : nt!KeBugCheckEx fffff880`05d059c0 fffff800`603e8bb5 : fffff880`04983b40 00000000`00000000 fffff880`04983000 ffffffff`ffffffe6 : nt! ?? ::NNGAKEGL::`string'+0x36216 fffff880`05d05a10 fffff800`604a48b6 : 00000000`00000372 fffff880`04983000 fffffa80`090203c0 fffffa80`08fc4540 : nt!MiDereferenceSessionFinal+0xf1 fffff880`05d05a80 fffff800`604abe68 : fffff8a0`00142b00 00000000`00000000 00000000`00000001 00000000`00000001 : nt!MmCleanProcessAddressSpace+0x2be fffff880`05d05af0 fffff800`604ac55e : fffffa80`00000000 00000002`00000001 00000000`00000000 fffff8a0`00d0b8f0 : nt!PspExitThread+0x668 fffff880`05d05c10 fffff800`600e1dd6 : fffff800`60377180 00000000`00000080 fffffa80`090203c0 fffffa80`08fc4540 : nt!PspTerminateThreadByPointer+0x4e fffff880`05d05c60 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiStartSystemThread+0x16
    STACK_COMMAND:  kb
    FOLLOWUP_IP: nt! ?? ::NNGAKEGL::`string'+36216 fffff800`60680506 cc              int     3
    SYMBOL_STACK_INDEX:  1
    SYMBOL_NAME:  nt! ?? ::NNGAKEGL::`string'+36216
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: nt
    IMAGE_NAME:  ntkrnlmp.exe
    DEBUG_FLR_IMAGE_TIMESTAMP:  5010ac4b
    FAILURE_BUCKET_ID:  X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
    BUCKET_ID:  X64_0xAB_nt!_??_::NNGAKEGL::_string_+36216
    Followup: MachineOwner ---------

    Ok, the problem is generated by NVIDIA VIDEO DRIVER!
    Honesty I cant understand why LENOVO not choose for this machines a ivibridge CPU with HD4000 VIDEO, performance is similar, and Intel VIDEOS GPU, have 0 troubles, ATI AND NVIDIA always are very problematic.
    Anyway the solution is simple:
    1 Turn OFF windows update, or change to selective install.
    This prevent win update install NVIDIA driver in automatic way.
    2 Uninstall NVIDIA driver sand NVIDIA related stuff.
    3 Restart the machine, NOT POWER OFF, just restart.
    4 Now go to SYSTEM PROPERTIES > HARDWARE > DEVICE MANAGER
    INSIDE DISPLAY ADPATER NOW SELECT DISABLE THE DEFAULT VGA DRIVER, NOR UNINSTALL CHOOSE DISABLE!
    NOW RESTART.
    After restart now touchscreen work correctly, and next time you power off the machine, not have that ugly error all time.
    This not is a final solution is just a workaround until LENOVO/NVIDIA provide a final fix for this.

  • Boot Camp and Windows 7 Problems

    I have found a reproducible bug with Boot Camp and WIndows 7.
    Clean install of OS X 10.6.2, Boot Camp Asst. Partition on my Mac Pro boot drive, clean install Win 7.
    Problem: while in OS X, Disk Util Repair Permissions takes forever, churning away at the hard drive. Also, intermittent Spotlight hangs, and weird Dropbox behavior where it churns the disk like crazy again.
    I have Paragon NTFS for Mac v 7.03 and perhaps this has something to do with it.
    After retuning to a single partition using Boot Camp Asst. (deleting the Win 7 partition), all is back to normal - Repair Permissions takes about 60 seconds, no Spotlight or Dropbox issues whatsoever.
    Using Fusion for Win 7 for now. Awaiting official Apple support of Win 7 in Boot Camp.
    Wondering if anyone else can confirm this behavior where you have a partitioned boot drive with 10.6.2 and Win 7, with or without NTFS for Mac 7.03.

    Addendum: on reboot/option key boot screen, it showed OS X volume, Win 7 Volume, and EFI Boot Volume - the latter had never been there before with Vista.

  • ITunes and Windows Vista problem

    I have Windows Vista and ran iTunes successfully for 8mos.  Now I'm getting a message box that says "iTunes has stopped working.  Close box and Windows will send a solution."  The solution, upgrading Windows, doesn't work.  Is Vista the problem?

    Scan and Fix windows System files:
    Can you go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
    type in
    sfc /scannow
    let Windows fix any system files that need to be repaired.
    Restart the computer if it did actually repair or update files.
    Start iTunes again

  • Iphone 5 and windows 8  problems

    I am having syncing problems with my iphone 5 and windows 8. 

    whats your exact setup as in how do you do it?
    what do you do?
    what result do you expect?
    what result do you receive ?
    how does what you receive differ from your expectation?

  • T430u and Windows 8 Problems

    Hi everyone,
    Really need some helps here. I bought a T430u , and to be honest, i'm rather dissapointed with this. My keyboard was dead in a matter of weeks, so i've just get it back from the sevice centre. And now I have another problems:
    1.Cannot wake up from sleep
    I've read on another sites that I have to disable expresscache and quick start, but then it'll make the ssd caching useless isn't it? And yet after I uninstall expresscache and disabled quick start, it still doesn't solve my problem. Now it'll wake from sleep but will crash and restart.
    2.Glitchy trackpad
    On some occassion, the trackpad just stop working for 1 - 5 minutes. And then it'll work again. Now I mainly use mouse, but seriously...
    I've upgraded all the lenovo driver and windows update too. But it doesn't solve anything...

    Hi centraldogma,
    Welcome to Lenovo Community. I'm assuming that the system is still under warranty. I would suggest calling Tech Support to see if they can help you troubleshoot the problems. If that doesn't help perhaps they can advise about the last option of returning the system.
    ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
    If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
    Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
    Microsoft MVP - Consumer Security
    SpywareHammer

  • Dreamweaver CC and Windows 8.1 - Can't Find A Valid Editor For This File Extension

    Was running the latest version with no issues and then I loaded Office 2013 .. Now when I am in the remote site and try to double click on a .cfm file, I get a dialog box..Can't Find A Valid Editor For This File Extension..
    I tried the support chat and they said Dreamweaver support was not available, try again later???
    So I thought I would reinstall the CC version and now I can see the Dreamweaver icon next to the files but still ... can't open the file..
    Any assistance would be appreciated?
    Leo

    The issue is only in Windows 8.x where when Dreamweaver CC is installed, it is not able to turn on the file type associations by default.  The workaround for now is to manually add the extensions both within Windows and then within Dreamweaver CC itself.
    Go to Control Panel > Programs > Default Programs > Set Your Default Programs and select Dreamweaver CC and then select 'Choose defaults for this program' and Select All or the extensions you want to open in Dreamweaver CC
    Start Dreamweaver CC and go to Edit > Preferences > File Types/Editors and add '.cfm .cfc' to the extensions and then add C:\Program Files (x86)\Dreamweaver CC\Dreamweaver.exe then click on Apply and Close
    That should be it.
    James

  • Adobe Acrobat 5.0 and Windows 7 Problem

    How do I get Adobe Acrobat 5.0 and Windows 7 compatible so I can access my attachments to e-mails sent to me?

    I was successful in installing AA5 in Win7 Starter as a test. It works except that I changed the printer port to file (AcroTray or the Distiller Assistant of AA5 does not work in Win7). You can open the files that are created in Distiller to create PDFs. You may be able to use watched folders to automate the process to some degree.
    I suspect that your question is more of having problems reading PDF files in AA5. That is a different issue. It is not a Win7 compatibility issue, but one of needing a newer PDF viewer. I have AA5 on one XP machine that I use Reader X on for seeing the newer files. I do have to deal with some conflicts between AA5 and ARX, but I can deal with that (many folks lose there minds on that).
    There is one other option that might be a major problem. Many folks are getting Win7 on 64-bit machines. In that case, you will have to be sure AA5 runs in 32-bit compatibility.
    At least that should give you some ideas of what might work. If a 64-bit machine, you may definitely have a problem -- I never tested that combination.

  • SB X-Fi Xtremegamer Fatal1ty Pro and Windows 7 problem

    6SB X-Fi Xtremegamer Fatalty Pro and Windows 7 problem7Hi,
    I have SB X-Fi Xtremegamer Fatalty Pro? sound card on my pc and after updating on windows 7 Unltimate my card doesnt work... i tryed every posible driver according this issue and nothing happens.. i got 2 errors .) on Volume panel i have this messege " There are no supported audio device available. You need to close the application. Click OK to close the applcation now. " and on Computer manangement an error on Creative X-Fi audio Processor (WDM),?
    I check the drivers and is SB0460?. on the site it say Xtreme music but the code is the same with my card.. i used this drivers and nothing. i also used auto update and nothing again..
    Please any help because i dont know what to do any more..
    My best regards

    Did you try using an independent driver such as robertmc8's PAX driver or Daniel K.'s drivers? I have an old PCI-based Xtremegamer Fatalty Pro with Windows 7 64 bit and I am using PAX drivers. No problems here.

  • Dreamweaver CS3 and Windows 8 Issues

    I have Dreamwever CS3 and Windows 8 and I keep getting errors that can only be resolved by closing down DW and losing the work I have processed so far. I happens mostly when I use extentions such as Webassaist Data Bridge. I have visited their forum but they advised me to checkout you trouble shooting service.
    Please advise
    tonytanner257

    Hi,
    If Dreamweaver is working fine without the extensions, I am not sure if we should be troubleshooting Dreamweaver. Just to be sure, Windows 8 is not a supported version for Dreamweaver CS3. It could possibly work, but wouldn't have been tested on Windows 8 as Adobe supports only the previous two versions of any software.
    This is my best answer. You could wait for other experts for their opinion.
    Thanks,
    Preran

  • Primairy IDE and Windows Install Problems!

    Hail all, I have had this issue the last 48 hours for the most part, but it started last monday night..
    I orderd all my stuff from newegg.. I got:
    Intel 775 Socket 2.8ghz Prescott
    ECS Mobo (psh model)
    2x 512mb DDR 3200
    Western Digital 80gb Hard Drive at 7.2k RPM (my only OEM item)
    Chaintech GeForce 6600 GT video card
    Jaht ( I think? :p ) Wireless PCI Adapter (can't have wires running in my room)
    Aspire-X Dreamer II Case
    Rosewell DVD/CD-RW combo (very cheap).
    Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome!
    I got a signal to the monitor, and it started up. I put in a floppy for the latest BIOs and it seemed to go right. I put in my WinXP disk, and rebooted. Do do do, it starts to do that 'pre-'load Windows thing. When the little message at the bottom says "Loading Windows Setup". I am thinking "so leet  ".
    When, HELLO, my first Blue Screen of Death (before I even installed Windows! I love that). It says check for Virusis (I havn't been on the internet..) and uninstall any new HDs and such. Well, that confuses me. So.. I put in my friend's very very old HD (which has tons of buggies in it BTW) and that loads fine. So I put mine back in, skim through my BIOs and I notice that the HD is the Third Master IDE, and that my CD-ROM slot is considered RAID.
    What the hell?
    I am going to install the older set of BIOs for the 915P Combo from July instead of the September ones and hopefully that'll fix it.
    Has anyone else had any errors like this? Thanks - Erik

    you skiped the part about him buying the msi board.
    Anyways, I hooked it all in and it wouldn't give a signal to my monitor. I found out a small mount was hitting the mobo, and it was probably damaged. I got a new motherboard on Friday (which was all of my paycheck being as young as I am), the grand MSI 915P Combo. Oh, it was so shiny and awesome
    try switching the jumper on the hard drive make sure its set to master it could be on slave and casuign some problem.  I know for some odd reason when my 1 of my drives is in a differt location i cant boot windows i move it back and its good.

  • Audigy 2 ZS Platinum and Windows 7 problems

    Hi there,
    Recently upgraded to a new PC and Windows 7, and am gutted that the audio/interface card no longer seems to work. I mean, it works for simple listening duties, but the Line In/Mic, "What You Hear" etc., are all registered as "currently unavailable". I home record a radio show, so I'm in a panic to get the card working properly. I'd have to downgrade to XP.
    The current drivers available are listed as working for Windows 7 on the Creative site, not sure they should be up when they don't.
    Any sign of a resolution for this, or ideas what I could do?

    / Came up with something of a partial fix for this.
    Right click the driver installation file, go to properties, find the compatibility bit and change it to XP, then install.
    Most things stayed not working, but the one I really need "Line in 2/Mic 2" now works, thankfully.
    Be nice to get all the functionality back though!

  • Dreamweaver 8 and Windows 7 64 bit no Server Debug

    I have DW8 up and running but I can't get the Server Debug to work for Coldfusion.
    Has anyone been able to get this working?

    I have not run the older version of DW with Windows 7, but if the feature is not working it is a possibility that it is due to the out-of-date Dreamweaver.  Adobe's policy only allows users to upgrade from the previous 3 versions.  So for you Dreamweaver CS5 is the last chance you have to upgrade.  Once CS6 goes on sale, you will be forced to pay the full retail cost for the application again.  If you are having problems I would recommend downloading the demo of CS5 and see if it is working.  Different versions can be installed side-by-side.  The only restriction is that you cannot run the old and new versions at the same time.  If the problem is fixed, it is likely an incompatibility and upgrading is the only solution.  If the problem is not fixed, please repost.

  • Dreamweaver CS3 and Windows 7

    We were just upgraded to Windows 7 from XP at work and althought my CS3 suite is not showing any signs of problems, Dreamweaver has this bug where when I am browins for a site folder using the Edia Sites dialog box, the settings don't save any folders deeper than one level, so for example, if I am locating the testing server location for a site, and that location is X:\devsites\sites\site4 and during the session I dorows to that location and open that site4 folder and click ok to select it, DW CS3 only takes the devcites folder top level as the desired folder. I have to manually type the path in the testing server folder field in order for DW CS3 to accept the location. Is there any support currently provided for bugs of CS3 since CS4 is already out?

    See http://forums.adobe.com/thread/478327.

Maybe you are looking for