Dreamweaver 8 - does not always render content correctly when element sizes are specified as %s

Hi,
I'm using DW 8 and am changing CSSs to specify element sizes as %s - a move towards responsive design. Browsers that I've tried - Firefox, Chrome, IE and Safari - render the results correctly but DW does not always render correctly: it seems to have particular problems in calculating and showing margins and padding. Does anybody know whether this is a known fault? Am I asking too much of an old version of the system? Or am I missing something else somewhere along the way?
Thanks,
Andrew

andywalmsley wrote:
Hi,
Am I asking too much of an old version of the system? Or am I missing something else somewhere along the way?
Yes, Dreamweaver design view, whilst quite good, did and still does not represent the css you write 100% accurately.
The more complex the css the less likely it is to render as you would expect.
I've come to rely less and less on design view over the past months as ways and means of producing websites advance leaving DW some way off the pace, it always has been.
I have not tested out CC2014 but would suspect its an improvement over past versions at showing css in design view but still behind the curve.

Similar Messages

In range and coerce function does not always return a correct result

I passed 20E6 as DBL to "upper limit" input of "in-range and coerce" built-in VI, and also passed 20E6 as DBL to the X input of the VI, yet it says that it is not in range. (Note: lower limit was hardwired to 0.)
Apparently, there is some kind of roundoff error going on with LabVIEW.
I've seen this before when just wiring 2 doubles of the same value to an "=?" built-in VI.
When I display 30 digits or so, the values then display slightly differently.
How do 2 numbers which were entered by ME (not anything else) precisely as 20E6 manage, over time or by passing thru VIs, or by being copied & pasted -- or whatever -- to become "different"?

This simpliest 'In Range and coerce' does not work on my setup (8.0 and XP). The result should be 0 but it returns -5.
Attachments:
Coerce Not Working.vi ‏8 KB

Group tree does not always render data in ActiveX viewer

We are using Crystal XI R2 and the RDC/ASP interface to render reports in the ActiveX viewer. The web server is a Windows 2008 R2 64 bit machine.
Yes, I know it is not supported but I was hoping someone may have a workaround.
We got the ActiveX viewer to render by making the noted fix to rptserver.asp but the problem we are now facing is that on certain reports, the group tree pane will not render all the data properly and comes up blank. The main report pane is no problem and displays the data fine. The problem seems to be related to the amount of data that the group tree pane is displaying and some reports will render it properly whereas others will not.
Anyone seen a similar problem before and have any clues as to how to correct it?

Does it work on WIN 2003 server?
The problem seems to be related to the amount of data that the group tree pane is displaying and some reports will render it properly whereas others will not.
If as a test if you filter the data so there is less of it, does the group tree pane appear on these reports?
Make sure the 'DisplayGroupTree' property is not set to False.
- Ludek
Edited by: Ludek Uher on Jun 17, 2011 6:55 AM

Pdf complete does not always create a correct pdf document

The HP Z230 I bought recently was equipped with PDF Complete to print to a pdf file. Unfortunately, it is inferior to the freeware CutePDF, in that sometimes it doesn't convert all of the letters in the document, and the font is strange.
I've made print out pdf files using PDF Complete and CutePDF to compare the two outputs. If somone from HP can point me to a place where I can upload both, you'll see the problem. The source from each file was another pdf document on a CD.
Terry Quinn

Hello @TerryQ,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are having difficulty with the PDF writer on your HP Z230 Desktop Workstation. I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can do this at Workstations - z series, xw series, and legacy x and w series.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

IPhone5 does not mute the incoming call when the earbuds are plugged in

How come? I expected the phone calls to ring in the earbuds, not in the phone itself. How do I set up the phone so when I have the earbuds plugged in the phone doesn't ring in the middle of a meeting.

I have this exact problem, have you had any luck solving it Louise? I see that no one has replied so I was wondering if you ever solved the problem. If you did can you please respond back with what worked for you?

FireFox home page does not always display correctly, hence I cannot do anything

On my Dell laptop the FireFox home page does not always fully display. When this happens I cannot access several web sites and some that I can do not display correctly either. On some occasions everything works correctly.
I have 2 Dell Inspiron laptops the same except one is running Vista (the one that does not always work) and one running Windows 7 (this one has no problems).

On my Dell laptop the FireFox home page does not always fully display. When this happens I cannot access several web sites and some that I can do not display correctly either. On some occasions everything works correctly.
I have 2 Dell Inspiron laptops the same except one is running Vista (the one that does not always work) and one running Windows 7 (this one has no problems).

[svn] 3459: Fix FB-14050: Watchpoints: Debugger stack does not always show correct 'Suspended' message when at a Watchpoint.

Revision: 3459
Author: [email protected]
Date: 2008-10-02 14:09:16 -0700 (Thu, 02 Oct 2008)
Log Message:
Fix FB-14050: Watchpoints: Debugger stack does not always show correct 'Suspended' message when at a Watchpoint.
Ticket Links:
http://bugs.adobe.com/jira/browse/FB-14050
Modified Paths:
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/DManager.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/DProtocol.java
flex/sdk/trunk/modules/debugger/src/java/flash/tools/debugger/concrete/PlayerSession.java

Hi Experts,
After i tried a few times, i can successfully start prepare with upgrade asistant monitor - Administrator >> Start Prepare,
Thanks

HT203167 My iTunes library on laptop is correct/up to date with recent purchases and downloads; however, our desktop computer does not have any of these when logged into Itunes.... how do I add these so both computers have current info?

The iTunes library on our laptop is correct and up to date with recent purchases and downloads; however, our desktop does not have any of these when using it. Home sharing is turned "ON" with both computers. Why is the desktop not showing the same content and how do I resolve this?

From your OLD computer...
Copy your ENTIRE iTunes FOLDER to an External Drive... and then from the External Drive to your New Computer..
Full Details Here > http://support.apple.com/kb/HT1751
Also see this migrate iTunes library post by turingtest2

Error consuming Web service - content type text/xml;charset=utf-8 of the response message does not match the content type of the binding

Hi all,
We are trying to interact with Documentum server through DFS exposed WCF which communicates through port 9443 and we are provided with documentum issued Public Key certificates. We have successfully imported the certificates in client machine and configured
the bindings as below in our .Net web application config file.
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="None"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
Also, we set the message encoding as MTOM and the wcf client object initialization code snippet is as below,
ObjectServicePortClient
serviceClient = new
ObjectServicePortClient(new
WSHttpBinding("ObjectServicePortBinding1"),
new
EndpointAddress(UriUtil.ObjectServiceUri));
if (serviceClient.Endpoint.Binding
is
WSHttpBinding)
   WSHttpBinding
wsBinding = serviceClient.Endpoint.Binding as
WSHttpBinding;
wsBinding.MessageEncoding =
"MTOM".Equals(transferMode) ?
WSMessageEncoding.Mtom :
WSMessageEncoding.Text;
serviceClient.Endpoint.Behaviors.Add(new
ServiceContextBehavior(Config.RepositoryName,
Config.DocumentumUserName,
Config.DocumentumPassword));
When we execute the above code, we are getting error message as below,
Exception: The content type text/xml;charset=utf-8 of the response message does not match the content type of the binding (multipart/related; type="application/xop+xml"). If using a custom encoder, be sure that the IsContentTypeSupported
method is implemented properly. The first 407 bytes of the response were: '<?xml version="1.0" ?><S:Envelope xmlns:S="http://schemas.xmlsoap.org/soap/envelope/"><S:Body><S:Fault xmlns:ns4="http://www.w3.org/2003/05/soap-envelope"><faultcode>S:VersionMismatch</faultcode><faultstring>Couldn't
create SOAP message. Expecting Envelope in namespace http://schemas.xmlsoap.org/soap/envelope/, but got http://www.w3.org/2003/05/soap-envelope </faultstring></S:Fault></S:Body></S:Envelope>'
Then, we changed the bindings as below
<system.serviceModel>
<bindings>
<wsHttpBinding>
<binding
name="ObjectServicePortBinding1">
<security
mode="Transport">
<transport
clientCredentialType="Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
<binding
name="QueryServicePortBinding">
<security
mode="Transport">
<transport
clientCredentialType="
Certificate"
proxyCredentialType="None"
realm=""
/>
<message
clientCredentialType="Certificate"
algorithmSuite="Default"
/>
</security>
</binding>
</wsHttpBinding>
</bindings>
We are getting another error message,
Exception: The client certificate is not provided. Specify a client certificate in ClientCredentials.
Any pointers on resolving this issue would be highly helpful.
Thanks

Hi Dhanasegaran,
As per your case, the corresponding details which may guide you to resolve this issue:
1. First of all, you can try to call the wcf service directly from the browser & check where it will point out the correct location.
2. In config file ,Set IncludeExceptionDetailInFaults to true to enable exception information to flow to clients for debugging purposes .
Set this to true only during development to troubleshoot a service like below :
<serviceBehaviors>
<behavior name="metadataAndDebugEnabled">
    <serviceDebug
      includeExceptionDetailInFaults="true"
/>
    <serviceMetadata
      httpGetEnabled="true"
      httpGetUrl=""
/>
</behavior>
</serviceBehaviors>
3. I suggest you to change that <security mode ="TransportWithMessageCredential"> instead of <security mode ="Transport">
for more information, refer the following link :
https://msdn.microsoft.com/en-us/library/aa354508(v=vs.110).aspx

THE DETACH FROM TEMPLATE FUNCTION IN DREAMWEAVER CC DOES NOT SEEM TO BE FUNCTIONAL Can you please explain.

The detach from template function in Dreamweaver CC does not seem to be functional
Can some explain.
Bruce K.

Hi Lalita
Yes you are correct, I TRY THE Modify -> Templates -> Detach from Template. I have built over 50 websites with this method using Modify -> Templates -> Detach from Template in DW CS5.5
After a save a page to a template for future ref.
I create a new page using this temp. but can not use the Modify -> Templates -> Detach from Template. The Detach from Template is not functional. It is there but when I mouse over its not operative.
Does DW CC need update maybe.
Thanks
Bruce

NB550D - battery icon does not always reflect the proper balance of time

I have just recently purchased an NB550D and I must say that at the outset I am very happy with it. It does tend to be a bit slow but I can live with that.
My problem however is that the battery icon does not always reflect the proper balance of time. For instance after a full charge it may show 9 hours remaining but after a shutdown and restart it will may show 75% and 3 hours remaining. If I shut down and restart it may show 75% and 6 hours remaining
When I first started the unit I allowed it to fully discharge (through use) three times as was suggested by the salesman at the store but quite candidly it doesn't seem to have made one scrap of difference!
Any advice will be appreciated.
Regards

Remaining time is not credible value of the battery state - it depends on actual duty of processor and the program wich estimates this sometimes shows wrong that time or corrects this after a while. Percentage of charge of battery is much better factor to use!
But in case your battery loses from 95% to 75% after restart indictates that's something wrong with the battery or program... In my NB550D after restart (pause for 1 day) the battery loses only 2-3% .

Printer settings menu does not always change when switching printers

I am running OS 10.3.9 and also seen this issue on a 10.4 machine. When switching from one printer to another the printer options drop down menu does not always transfer to the correct menu for the newly selected printer. It stays at the menu for the last used printer. I am using several different Sharp printers as well as some HP models. The applications being used are Office 10 Word and Power Point. If anyone has seen this and has a fix I would greatly appreciate it.
Thanks

I don't have a solution but have also noticed that the printer in the menu is sort of like spinning the wheel of fortune.
Hopefully there is a solution but my guess is that it has something to do with a printer preference file that can get hijacked by different printers and applications.
I have noticed that a printer driver when installed will usually appear as the default printer even if it was not selected as such. I have also notice that different applications will do different things with different printers so I hope someone has a solution.

Dreamweaver cs6 does not update links when moving files.

Dreamweaver cs6 does not update links when moving files. I've tried changing my general > settings for "Update links when moving files" to "prompt", and Ive tried "always". Neither work for me. The files are moved fine, but the links don't change. When it's set to "prompt" - I'm never prompted. Is this a bug or is there another setting somewhere?

MadelineCACA wrote:
I haven't define a site. I've opened an index.htm file within a folder structure that I have on my MAC. When I moved a file called art.htm (within the files tab) from a subfolder into the root folder with the index.htm file, it didn't update the image links in art.htm.
In order for DW to manage links, you absolutely MUST Define a Site...
http://tv.adobe.com/watch/learn-dreamweaver-cs5/gs01-defining-a-new-site/
Also, you MUST use the Files tab within DW to move files around within your Defined Site in order for DW to know it needs to update links.

External drive does not always mount?

I have a 1 terrabyte Lacie external FW drive that does not always mount. Are there any issues with Tiger recognizing such a large drive? Is there anything I can do to make it mount better?

hello and welcome to Apple Discussions!
You might try using Disk Utility, (Applications/Utilities) and see if the Lacie mounts in the panel on the left under MacintoshHD. If it does mount, you can try to repair it using Disk Utility.
Are you sure you have your Finder preferences set correctly? Click a clear area on your Desktop then in the Menu click Finder>Preferences. Under, "Show These Items" on the Desktop, make sure you have first three boxes checked.
Also, run Disk Utility and Repair Permissions. That can fix a myriad of bugs.
Carolyn

My iPhone 5s recognizes my fingerprint but does not always unlock.

Hi,
My iPhone 5s recognizes my fingerprint but does not always unlock. Sometimes it will unlock, and sometime it won't. It does not even give the "try again" message. Unrecognized fingerprints will give the "try again" message. Entering the passcode works fine.
Any ideas on correcting this?
Thanks.

Hello there, whitewinter.
The following Knowledge Base article provides some great insight on troubleshooting issues for Touch ID:
iPhone 5s: Using Touch ID
http://support.apple.com/kb/HT5883
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

Dreamweaver 8 - does not always render content correctly when element sizes are specified as %s

Similar Messages

Maybe you are looking for