Dreamweaver and Windows Vista Problem

Hello,
I ran into a problem with my Dreamweaver - 8 application and
cannot find a fix. I open up the Dreamweaver application, 2-3
seconds later, I get the following error message, “A problem
caused the program to stop working correctly, windows will close
the program and notify you if a solution is available.” I am
using Windows Vista and believe the problem is associated with the
Vista operating system. I am puzzled by the fact that I have been
using Dreamweaver with Vista and have had no problems up until now.
I uninstalled & reinstalled Dreamweaver to no avail. I
restored my computer to an earlier date, and updated Dreamweaver,
and still have the same problem.
Any help to resolve this problem would be greatly
appreciated.
Steve
Text
Text

Hello Again,
I finally fixed the problem. I went into my network settings
and reset my network address. This did the trick, I went back and
opened up Dreamweaver without any problem.
Steve

Similar Messages

Iphone and Windows Vista problem

Okay, so I have windows vista and the iphone seems to be having a hard time with that.
When I plug my Iphone into my computer it recognizes the apple device and asks if I want to import picture. In itunes it shows the button that the Iphone is plugged in and synced, however, when I press that button nothing happens. I can't add any photos to it because everytime I try there is some kind of error. What can I do?

Same exact problem!
Upon returning home after picking up the long awaited iPhone 2, I discovered that my iTunes and/or Windows Vista would not detect the iPhone, and I’ve been searching the Internet for a solution since (going on day two now). Apparently, Vista and the latest iTunes have had this problem quite a lot.
It’s really a shame, as I think Apple is missing a singular opportunity to use the iPhone as a transition drug to more Apple products. I for one have been looking for a reason to dump my Dell and pick up a MacBook Pro, and the iPhone seemed to be it.
However, if I get caught in the middle of a ******* match between Apple and Microsoft, well, they both lose.
When you spend this kind of money, it is imperative that the thing works out-of-the-box. I will never purchase a Dell again for just this reason. Now, if I purchase a Lada, well, I'm expecting to put in some hours and blood to get the thing air born, but an Apple product? No way.
Please help me become an Apple customer.

ITunes and Windows Vista problem

I have Windows Vista and ran iTunes successfully for 8mos. Now I'm getting a message box that says "iTunes has stopped working. Close box and Windows will send a solution." The solution, upgrading Windows, doesn't work. Is Vista the problem?

Scan and Fix windows System files:
Can you go to command prompt (START/ALL PROGRAMS/ACCESSORIES right mouse click "command prompt" and choose "Run as Administrator"
type in
sfc /scannow
let Windows fix any system files that need to be repaired.
Restart the computer if it did actually repair or update files.
Start iTunes again

Zen v and windows vista problem, can you hel

??Hi, We just got a new pc os windows vista. Won't recognize my daughters zen v I got her for xmas, I've tried drivers, firmware update, uninstalling-reinstalling , no joy, I'm an amateur pc user but usually manage to install hardware, I loathe not getting a result after hours, days now weeks?of trying. Can any knowledgeable person please tell me where I am going wrong?

?Hi, no there is no error message, it's been a while since I tried to install it with the disc, it all went ok seemingly but when I went to start transferring files and plugged the player into the usb port( tried more than one)the pc just won't recognize the player, says ' no player has been detected, plug your player in'?It did the same with our printer and I tried for ages to get it to work, ended up getting a new cheap printer as my daughter needs it for her prelims. So rubbishy as I'm super skint and our printer worked fine on xp.

Unknown Device ipod Classic and Windows Vista problem??

Help!! My ipod Classic is not being recognized by my computer. I have read the previous articles and tried the solutions but I continue to get the result "Windows has determined that the driver software is up to date" I continue to get the error noise when I plug the USB in and the Device manager continues to say "Unknown Device" It seems others are having this problem, how do I fix this?

I am having the same trouble with mine, and I can say that it isn't iTunes, I plugged my brothers iPod Nano in and it worked like a charm, but when I plugged my iPod Classic 160g in all it says is it is an "unknown divice". It isn't Vista either as the same thing happens on XP Pro as well, so all I can think of is it is a error on the Classic itself. I just wish someone can help out so that I can use my ipod!!!! Come on Apple!!!! Solve this problem!!!!

Is Verizon going to acknowlege the problems with FIOS and Windows Vista

For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop. I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now. It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
This is what daily scenario is:
When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get internet access. After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks. The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also, I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches.

FIOS is short for fiber optics. fiber optics is different technology than DSL.
With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software. AND they offer you a fix.
cjacobs001

CS5 Dreamweaver on Windows Vista. Will not open at all. Please advise

CS5 Dreamweaver on Windows Vista. Will not open at all. Been fine until now. No recent updates on computer, other Creative Suite software all work fine too.
I have the Student package installation so I am unable to uninstall then re-install as one off set up. Or is it possible to get the re-installation on a student package, and if so will I have to re-install everything?
have been using Dreamweaver only two months ago and now it is will not open. I do not get anything on the screen, no egg-timer or anything. Tried to look up online to solve problem, but no joy.
Please advise....
James

When DW starts acting weird, the first thing to try is Deleting Corrupted Cache in DW
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences. Note: your work space, custom settings & 3rd party extensions will be wiped out by this. So make backups of anything you need to keep.
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CS Cleaner Tools below followed by a software re-install.
http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Good luck!
Nancy O.

Is there a fix for the incompatibility between itunes and Windows Vista?

I'm having a problem with itunes and Windows Vista. When I download itunes it disables my dvd drive. I have found a fix for that by deleting some registry items, but when I do that itunes is disabled. Does anyone know of a solution to this problem?

Hey Don,
What exactly happens after you install iTunes? Do you see an error message?
This article describes device filter issues that can be caused by application conflicts:
http://docs.info.apple.com/article.html?artnum=305422
Jason

Ipod nano first generation and windows vista

I finally got everything to work right with Itunes and Windows Vista except one minor problem.
On my ipod, the blue "dot" does not show up when a podcast is new, so in a long lists of podcasts, I can't tell which ones I already listened to.
Is there a way to fix this?
Thank you, Debra

I have a new ipod nano and can not download iTunes to Winnows Vista.
Need all the help that i can get. Thanks,
Capt g

Audigy 2zs Gamer and Windows Vista / Windows 7

.Audigy 2zs Gamer and Windows Vista / Windows 7? Hello, I am just wondering if it is a known issue to have really loud static and crackling when playing games using this card in Vista or Windows 7. I had this issue playing Bioshock a few months back on my Vista boot. I never figured out a way to resolve it so I belei've I just eventually uninstalled the driver and used the card without a driver install (not sure but I think this what I did). It worked but I might as well of just ran onboard sound...
Now I have installed and tried to run Windows 7 on a dual boot but I started receiving really loud cracking and popping in Warhammer Online and realized I had not installed a driver for my sound card. I did not expect creative to have a Win 7 driver yet but thought perhaps the Vista driver would work in compatibility mode, it does and sounds awesome and really makes me remember what I am missing without my driver installed on Vista but unfortunatly it randomly starts the crackling and popping again after a while...especially when a lot start happening on screen (pvp raids with many characters on screen and magic effects).
When the crackling starts happening I have no choice but to exit the game and restart the computer to get rid of the noise, but randomly it comes back after a while during gameplay. So as a temporary solution I have installed my onboard sound drivers and have been using that for sound output and my mic port on my sound card for my microphone. I would REALLY love to get my sound issues worked out in both Vista and Win 7 because it sounds SOOO awesome while it's working, the popping though is terrible, I never had that issue in XP.
I know this is an older card but any help would be appreciated!?
Message Edited by grimdeath9740 on 0-4-2009 2:3 PM@
68.95.29.2

One thing you do need to learn is that SHOUTING IS MUCH HARDER TO READ!
But, if you are using Audition 1 and it works with XP, then if you have the chance, I'd stick to that on a new machine. Apart from anything else, it's completely untried with Windows7 and with Vista its a) likely to have problems, and b) going to run slower.
The other part of your question about the 'look' of later versions is that 1.5 looks pretty similar to 1.0, but with 2.0 and 3.0 things have changed somewhat - rather more with Multitrack View than Edit View. Basic operating principle remains the same, though - most people have had very little trouble transferring from one to another.

Oracle 10g XE and Windows Vista

I bought a laptop with an excitement; and installed oracle 10g XE, now I can't run the oracle on this Windows Vista? Any guidance and suggestion would be much appreciated.
I couldn't dare to install linux fedora on this laptop which has Windows Vista for a dual boot sytem because I read all negative things in google about the dual bootying system of fedora and windows vista. Any suggestion and guidance would be one again would be very much appreciated.
[email protected]

I have a problem with Oracle XE installed on my laptop 1GB RAM with Windows Vista :).
It installed ok, but when I run my program (Visual Foxpro 9) it stays 30 seconds up to a minute to make a few selections.
The same program on my laptop works fine with other databases installed on windows xp or windows 2003 server.
Also, from other computers I can connect to Oracle XE on Windows Vista and make those selections fine.
I uninstalled Oracle XE from my laptop.
I downloaded Oracle Database 10g Release 2 (10.2.0.3) Enterprise/Standard Edition for Microsoft Windows Vista and I installed it.
It's the same problem.
On my laptop, my program (VFP9 - connects through ODBC) or PLSQL Developer freeze when I do a select from a table with 72053 rows (the result has 2000 rows).
If I connect from another computer, where I installed Oracle Instant Client from Oracle Database 10g Client Release 2 (10.2.0.3) for Vista, the select runs instantaneously :)
My head hurts very much at this time.
We bought the laptop with Vista OEM for presentations :) - it's unusable at this point :)

Incompatibility among the authentication WEB-based and Windows Vista

I have a Wireless LAN Controller 5.0.148.2 and Access Points 1252 and 1231; the customer have 8 laptops with Windows Vista that they present problems when to get connected to the Guest's WLAN; these same ones do not present problems when they authenticate to Employee's WLAN through PEAP. The laptops with Windows XP do not present this problem.
The users that are connected to the Guest's WLAN then they obtain correctly the direction IP through DHCP; the Guest's users can not visualize the page find salutatory Web or when sometimes they visualize it, they introduce the username and password and next do not visualize the page accordingly, and they do not connect to the Internet.
Them laptops in mention come from different manufacturers ( HP and DELL ), Windows Vista's versions ( Home Basic and Home Premium ) and wireless cards ( INTEL and ATHEROS ).

I'm having the same problem with our student wireless. It uses web authentication and Windows Vista and Mac users are having problems but Windows XP works fine. They all get IP addresses but aren't getting presented with the login page.

Officejet 6110 and Windows Vista lost communication

I have used this printer with this computer for years. It is an HP Officejet 6110 and Windows Vista. No problems and prints all the time using the built in driver that came with Vista. We powered the computer and the printer down. Moved them to the other wall, 6 feet. Plugged them back in, excatly, all same ports and cords, and when you print the spooler shows "Print - Error". Only message and no more details. Thought maybe cable for printer bad but tried one form a different computer and same thing. Uninstalled printer and when rebooted Windows did not see it to Auto install. Told Windows to search for new hardware and it found nothing. Turned printer off and tried reboot and still nothing. Tried manually adding and choosing old port, and nothing. Looked all over web and did not see solution. Went in to safe mode and printer not listed. Where can we go to completely remove printer so Windows will find new hardware and reinstall properly?

Hi RFG1022,
Thanks for getting back to me with the printer information. Much appreciated.
What I would like to do is go step by step through a series of troubleshooting steps with you.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
The next step would be to remove the usb cable from the printer and from the computer and leave it disconnected until further notice.
Please click on the following link for Uninstalling the Printer Software.
Once the uninstall is complete, reboot the computer so the changes take affect.
When the computer is back up and running, disable any firewalls or anti virus protection you may have running so that we don't have any conflicts with the reinstall.
The next link is for the HP Officejet 4630 e-All-in-One Printer series Full Feature Software and Drivers.
Save the file the desktop so that it creates its own icon. Double click the new icon and follow the instructions. The install will prompt you as to when to connect the usb cable or wireless option so please do not connect the usb until asked to do so.
If you have any other questions, please let me know.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Is Magic Mouse compatible with PC and Windows Vista

Hello to everyone, I'm a new member of this forum, I hope someone will help me, please.
I'm taking a look at the latest beautiful Apple's product and I felt in love with Magic Mouse, I'd like to have it for ma PC (not a Mac) with OS Vista.
Is there anyboby who knows if this mouse is compatible with a Pc and Windows Vista OS?
Actually I don't have bluetooth thecnology on my pc but if Magic Mouse were compatible I'd buy an usb adaptor.
Thanks to everyone will help e!

I asked a similar question a few hours back and no answers yet. I think nobody knows since nobody has had the chance to test them. If previous releases are any indication, you'll probably get basic functionality because it is bluetooth, but for the advanced features or setting options you'll have to wait for a Windows driver, which can sometimes take a few months or more.
My thread: http://discussions.apple.com/thread.jspa?threadID=2205313

Fieldpoint Hardware Drivers that are compatible with LV 8.5 and Windows Vista

I trying to develop in LabVIEW for some Fieldpoint hardware. I was going to download the hardware drivers from NI, but only see drivers that are compatible with Windows XP and LV 8.2
Or, am I just misinterpreting this?
Also, are there any potential conflicts with me developing on Vista, if my end-user, is uding another OS?
Daddy-O
One should welcome adversity as an opportunity to excel.

Hi Daddy-O,
Thank you for contacting National Instruments. This is a little misleading, and unfortunately the driver you are looking for is currently not directly searchable. In order to use your FieldPoint hardware with LabVIEW 8.5 and Windows Vista, you will need the FieldPoint 6.0 driver. This can be found within the disk that is distributed with new FieldPoint hardware, and any Device Drivers CD from August 2007 forward. Unfortunately, a standalone installer is not available for this driver, and if you do not have a hard copy of the Device Drivers, you can download this here. From this installer, you should be able to select FieldPoint 6.0 and install this software.
I hope this helps! Let me know if there is anything else I can clarify. Have a great day!
Jason W.
National Instruments
Applications Engineer

Dreamweaver and Windows Vista Problem

Similar Messages

Maybe you are looking for