Dreamweaver AP DIV and Rollover Actions
New to Dreamweaver. Enviornment Win XP using DW CS4. I have created tables using rollovers but discovered that AP DIVS and rollovers don't always work as expected. Here is the problem. I have a menu column that is about 3 inches tall. The top porton of the menu is a tab that says "About Us." The lower portion of the column lists the menu items. I have the about us tab set up as a rollover. When you mouse over the tab, it is suppose to change color and the tab is suppose to move down about 1/4". Then when you actually click on the tab, you are taken to another web page. When I created this in a table, it was easy. I had two images. One image was set at the size of the td and when rolled over, the second image appeared in the different color and moved slightly down so as to give the appearance that the tab had moved down. However with the ap div, I can get the image to change color, but the smaller size image (to give the appearance of moving down), is actually stretched by the ap div to fit the size of the ap div box. Not at all what I expected. So it appears that an ap div behavior is in order but I am not sure how to accomplish this. I did not find any behavior that would resize the ap div box and move it down to the appropriate position. If you mouse out, it should return to the proper position, original size and return to the original color. Any ideas? A quick response would be appreciated. Thanks!
RM818 wrote:
A quick response would be appreciated. Thanks!
In that case, please cooperate by uploading your test files and posting a link as requested
Similar Messages
-
Loading SWF in Dreamweaver using DIV and Accordian
Hi
I am wanting to create a web page with a vertical navigation panel on the left of the page and because this will includes 'categories' and 'sub categories' (see below)
CATEGORY 1
sub category 1a
sub category 1b
sub category 1c
sub category 1d
sub category 1e
CATEGORY 2
sub category 2a
sub category 2b
sub category 2c
sub category 2e
Ideally I would want the Category tabs when clicked to reveal the sub categories (Accordian)
I have the Spry Accordian set in a Div at the moment in Dreamweaver and the sub categories
open up and function fine. What I would like to achieve is to make all those sub categories links, to insert a SWF in to the div that is located to the right of the vertical nav column. (see attachment simple diagram) So, say sub category 2a was clicked then in the 'SWF display area div', the SWF associated with that link would appear, the if 'sub category 2d' was clicked the same 'SWF area div' was populated with the SWF linked to 'sub category 2d', if 'sub category 2e' was clicked then the SWF associated with 'sub category 2e' would then load into the 'SWF area div'. The attached image may make things clearer.
Many thanks in advance for any assistance you can give me.Hi
What you are talking about is an ajax enabled page, you can use html or xml using spry, (see - http://www.adobe.com/devnet/spry/)
Or any type of page php,asp, etc. using one of the javascript frameworks such as jQuery.
PZ -
I'm having an issue displaying a button using advanced actions and rollover slidelets.
I'm having an issue getting a button to display after the learner places his mouse over three different rollover slidelets which are all on the same slide. I created three variables and assigned each to the rollover slidelets. I also created a conditional action that I assigned to the slide. The variables are set to zero and then the action is to assign the variable with 1 after it's rolled over. The conditional action says that once all three variables are equal to 1, show the button and continue. Unfortunately the button is not displaying after the three rollovers have been viewed. Any insight?
I can only suspect what is going wrong, it would have been a lot easier if you did show those actions.
My suspicion is due to this sentence '... a conditional action that I assigned to the slide'? There are two slide events: On Enter, and On Exit. Read more about those events:
http://blog.lilybiri.com/events-and-advanced-actions
Those events can trigger an advanced action but only at that frame: first frame (On enter), last frame of the slide. But you expect the button to appear when the three rollover events have occurred? That means the condition has to be checked by each action triggered by the rollover events. Have multiple examples on my blog for such use cases, latest one was:
http://blog.lilybiri.com/blog-after-posterous-clickclick
Shortly:
Use the On Enter event of the slide to reset the three variables to zero, that will be a standard advanced action with three Assign statements (this is not necessary if you never expect the user to return to that slide)
Use each Rollover event to trigger a conditional advanced action with two decisions:
First decision 'Always' will be a mimicked standard action, and toggles that variable to 1
Second decision 'Checkit' will have your condition to see if the three variables are equal to 1, if Yes show the button, if No, nothing has to happen (or maybe Continue, depends on setup)
Lilybiri -
Can I use photoshop text styles and photoshop actions with creative cloud photography?
I'm really confused by this subscription pricing. If I purchase the $9.99/month, do I get the full desktop app of Photoshop and Lightroom? But I see on this page Products they list something called Photoshop CC that costs twice as much. How is that different from the Creative Cloud Photography?
My main question is whether I can use photoshop text styles and photoshop actions with Creative Cloud Photography, since I just purchased a bundle that includes these and I want to be able to use them. But I'd also like to understand what comes with all of the various products and how they are different.
My other question is how is Lightroom different from Photoshop? I have a sense of what you can do in Photoshop but I don't know much about Lightroom at all.
One more question: the free trial -- is it limited in any way besides the time length? If I do that, will I get a clear idea of all that I will be able to do once I subscribe, or are the functions limited in the trial?
I tried to just send an email to Adobe to ask these questions but apparently they are not interested in responding to emails from people who are not yet paying customers, so I was directed here. Thanks very much for your help!I always like to trot this bit about Bridge once in a while or in the voice of the "Two Bobs" from Office Space,
"Can you tell us exactly what it is you do around here?"
What Adobe Bridge does:
Bridge is the coordinating hub of the Creative Suite. Synchronizing color management settings for all suite programs is done from Bridge, and can only be done from Bridge, to take one important use.
Bridge displays actual thumbnails of many more file types than Finder or Explorer. It also allows instant play of sound or video files more readily than the native OS file managers.
Bridge allows direct access to file metadata, to embed copyright information and keywords where appropriate (e.g., for corporate logo vector and raster files). It also displays the fonts used in an InDesign file, the swatches in an INDD or AI and the output plates (including spot color plates) they use.
When managing the assets for a design project, Bridge allows quick and simple sorting, rating and custom labeling (with color flash indications) of assets. I can rate images according to whether they are rejects, possibles, for review by client, or approved. The filters built into Bridge allow instant isolation of only the approved images or designs in a folder, only the rejects (for deletion) or only files with certain ratings, no matter how many files it contains. It recognizes aspect ratios, so if I only need a landscape or a 16:9 image in a folder of hundreds of images, I turn off the aspect ratios I don't need.
Once filtered, the remaining visible files can be selected and copied, moved, or deleted without affecting the rest of the contents of a folder.
Collections are a massively useful feature. One of my clients is a performing arts center, and in a season we turn out dozens of ads, flyers, brochures, web banners, playbills, billboards and other collateral using the same assets over and over. These assets are organized by artist and/or show on disk, but I set up each season's repeating assets as a Collection in Bridge, so that I just have to open the collection and drag and drop these assets into new INDD, AI, PSD, HTML (in Dreamweaver), FLA or AE projects without having to navigate from folder to folder picking up individual files.
Bridge's Favorites is another place I stack frequently-accessed folders, such as stock photography, backgrounds, and top-level folders for active projects.
Assets can be divided into subfolders, but a quick toggle of "Show items from subfolders" exposes all of the assets in a single view while maintaining their organization. I will typically keep AIs, PSDs, EPSs, stock photography and client images in separate subfolders within a project. When I'm ready to start pulling assets into an InDesign layout, I toggle this on and simply drag what I need into the layout.
Bridge comes with Adobe Camera Raw built in, which is many times faster than using Photoshop to adjust jpegs or tiffs for things like tonal range, white balance, cropping, spotting and sharpening, and is non-destructive.
One tremendously useful Bridge function for InDesign CS5+ users is the "Show linked files" feature, which opens all the linked files in a layout into a single view, regardless of where they are physically located. I often use this when doing alternative layouts from a client-approved mockup for a campaign, to be certain the same assets are used in each piece, or when creating a motion graphic or interactive piece for the campaign in After Effects or Flash.
The batch and image processing scripts built into Bridge automate things like creating web-ready small jpegs from multiple images, renaming large numbers of files in place or by copying to an alternative location, creating sets of PSD, png, jpeg or other file types from an assortment of image files, and so on.
Bridge is so much a part of my daily workflow that on my main workstation I have one monitor dedicated to it almost 100%. Bridge just sits open 24/7, ready for use. I would run at half speed without it, no question. -
Inserting Images into Dreamweaver through Div Tag
Hi im quite new to Dreamweaver and i've got CS3...I've just
designed and sliced up a website in Photoshop and have started to
compile it together in Dreamweaver using HTML and CSS. I've just
added a Div tag and added images into the page and i've got stuck,
i cant seem to put another image next to one iv already placed
their.
I need help on how to work with Div Tags and applying images
so that i can fix my website like a Jigsaw.
I have provided the code i hav in my HTML so far...Maybe this will help you -
Taking a Fireworks comp to a CSS-based layout in Dreamweaver
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt1.html
http://www.adobe.com/devnet/fireworks/articles/web_standards_layouts_pt2.html
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"DThandi" <[email protected]> wrote in
message
news:gk8anj$4qc$[email protected]..
> Let me show you the before and after images of the site
im working on,
> then
> maybe what im trying to describe can become more
clearer...Your right that
> i do
> need some basic understanding, I actually used to know
the answer to my
> own
> question but since i havn't played around with
Dreamweaver for a while i
> seem
> to have forgotten.
>
> This was the image on Photshop:
>
http://i187.photobucket.com/albums/x151/ohhchakdeh/SAMPLE.jpg
>
> This is where I am stuck now:
>
http://i187.photobucket.com/albums/x151/ohhchakdeh/stuck.jpg
>
> These are all the small images i have sliced up from
Photshop:
>
http://i187.photobucket.com/albums/x151/ohhchakdeh/Untitled.jpg
>
> As you can see i have trouble coding in HTML. So far i
have been
> following a
> tutorial video showing me how to had images and align
them through Div
> Tag...But now i am trying to put images side by side in
the Navigation
> area and
> on top of and underneath each other. As you can see i
have Home.jpg and
> Home-Scrap.jpg. Home Scrap needs to go under Home and
both of them images
> need
> to go next to image Left-Short.jpg.
>
> Thank You
> -
Server Startup - log4j:WARN Failure in post-close rollover action
Hi,
Could anyone kindly help me to fix this issue??
We are Migrating Weblogic from 11g 10.3.2 to 10.3.6
After starting the server and checking the log, it keeps on prints "log4j:WARN Failure in post-close rollover action" in the log for several time.
It would be very helpful if you give me a solution to solve this issue.
Thanks
JanesHi,
Still i didn't get any solution to resolve this issue.
It would be very kind if someone help me.
Thanks in advance.
Regards,
Janes -
Aligning two divs and centering them.
so i am running into one main issue with my website. As of now the only two things on my site are a gray image and an image slider. I managed to get them into the same div and next to each other but i need them to both be static and centered by the webpage. I have put them into the same div with class="col-xs-6" and what you see happened. I know that my slider is responsive. They basically need to be next to each other and centered. I am new at making websites but this would help me a lot.
My site: http://rootforsite.azurewebsites.net/ (f12 for code)
I just need them next to each other and centered. Any thoughts?Copy and paste the following into a new document and view in the browser.
<!doctype html>
<html>
<head>
<meta name="viewport" content="width=device-width, initial-scale=1.0">
<meta charset="utf-8">
<title>Untitled Document</title>
<link href="http://maxcdn.bootstrapcdn.com/bootstrap/3.2.0/css/bootstrap.min.css" rel="stylesheet">
<link href="http://bxslider.com/lib/jquery.bxslider.css" rel="stylesheet" />
</head>
<body>
<nav class="navbar navbar-default" role="navigation">
<div class="container-fluid">
<div class="navbar-header">
<button type="button" class="navbar-toggle collapsed" data-toggle="collapse" data-target="#bs-example-navbar-collapse-1"> <span class="sr-only">Toggle navigation</span> <span class="icon-bar"></span> <span class="icon-bar"></span> <span class="icon-bar"></span> </button>
<a class="navbar-brand" href="#"><img src="img/logo.png" style="position: relative; top: -7.5px;" /></a> </div>
<div class="collapse navbar-collapse" id="bs-example-navbar-collapse-1">
<ul class="nav navbar-nav">
<li class="active"><a href="#">Link</a></li>
<li><a href="#">Link</a></li>
<li class="dropdown"> <a href="#" class="dropdown-toggle" data-toggle="dropdown">Dropdown <span class="caret"></span></a>
<ul class="dropdown-menu" role="menu">
<li><a href="#">Action</a></li>
<li><a href="#">Another action</a></li>
<li><a href="#">Something else here</a></li>
<li class="divider"></li>
<li><a href="#">Separated link</a></li>
<li class="divider"></li>
<li><a href="#">One more separated link</a></li>
</ul>
</li>
</ul>
<form class="navbar-form navbar-left" role="search">
<div class="form-group">
<input type="text" class="form-control" placeholder="Search" size=60px>
</div>
<button type="submit" class="btn btn-default" value="Open Window" onclick="window.open('http://www.cnn.com')">Submit</button>
</form>
<ul class="nav navbar-nav navbar-right">
<li><a href="#">Link</a></li>
<li class="dropdown"> <a href="#" class="dropdown-toggle" data-toggle="dropdown">Dropdown <span class="caret"></span></a>
<ul class="dropdown-menu" role="menu">
<li><a href="#">Action</a></li>
<li><a href="#">Another action</a></li>
<li><a href="#">Something else here</a></li>
<li class="divider"></li>
<li><a href="#">Separated link</a></li>
</ul>
</li>
</ul>
</div>
</div>
</nav>
<div class="container">
<div class="row">
<div class="col-sm-8">
<ul class="bxslider">
<li><img src="http://rootforsite.azurewebsites.net/img/Day1.jpg"></li>
<li><img src="http://rootforsite.azurewebsites.net/img/Day1.jpg"></li>
<li><img src="http://rootforsite.azurewebsites.net/img/Day1.jpg"></li>
<li><img src="http://rootforsite.azurewebsites.net/img/Day1.jpg"></li>
</ul>
</div>
<div class="col-sm-4">
<div class="imagess"> <img src="http://rootforsite.azurewebsites.net/img/pic.jpg" class="img-responsive center-block" />" </div>
</div>
</div>
</div>
<script src="https://ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min.js"></script>
<script src="http://maxcdn.bootstrapcdn.com/bootstrap/3.2.0/js/bootstrap.min.js"></script>
<script src="http://bxslider.com/lib/jquery.bxslider.js"></script>
<script>
$(document).ready(function(){
$('.bxslider').bxSlider();
</script>
</body>
</html> -
AS2 Clicktag and Rollover questions
I'm creating a banner ad for Yahoo.com and am running into a conflict with the Rollover replay and Clicktag. Both are buttons on separate layers with the ClickTag on top. If the Clicktag button is on, the rollover (replay) button is ignored.
I'm wondering what changes I need to make, but I need to keep the AS2 out of the Clicktag button. Also, if I rollover and out quickly, the animation replays, when it should stop. Thanks for any help. I've attached my .fla CS4 for analyzing.
Yahoo specs of note:
Animation can begin again on mouse over, but must stop immediately on mouse off.
When building flash creative, please note that the expression box must be checked and the URL should say clickTag.
If you would like to see the CS4 file, which may explain a lot more, please visit this link.
http://board.flashkit.com/board/showthread.php?p=4291469#post4291469
Thanks again!
Rollover/replay AS2 code
on (rollOver) {
this.play(2)
on (rollOut) {
this.gotoAndStop(33)
Clicktag
on (release) {
getURL(clickTag, "_blank");Thanks for the quick response. So here is exactly what I did.
Removed the codes from both button objects.
Renamed both button objects (clickTag_btn and replay_btn).
Removed Var loop code from Actions layer frame 1
Added following code to Actions layer, frame 1.
clickTag_btn.onRelease=function(){
getURL(clickTag,"_blank");
replay_btn.onRollOver=function(){
this._parent.play(2);
replay_btn.onRollOut=function(){
this._parent.gotoAndStop(33);
I changed the second and third actions to replay_btn, rather than clickTag as you noted. Otherwise it wouldn't call for replay, and why rename it correct? In any case, the file doesn't click through or rotate with this code. The hand appears, when I hover over it, but no frame 1 actions are executed.
Layer 1 - Clickthrough button (no code)
Layer 2 - Rotate button (no code)
Layer 3 - Actions (see above for code)
What am I missing that is not allowing both buttons to be recognized by the actionscript? Thanks again! -
Greetings
I am trying to connect to my FTP Server with Dreamweaver using SFTP (port 22). I can connect using FTP (port 21). I can also connect using the same credentials, with SFTP using CuteFTP client.
Any suggestions?Jive
Sorry, no I am not able to connect to the FTP server. The credentials are
correct. I can connect using a ftp client and Coldfusion Builder but, I
cannot connect through Dreamweaver or Contribute.
I hope that helps.
Sincerely
Ray Bakker
Web Developer | Corporate Information & Technology | City of Thunder Bay
T: 807.625.3024 | F: 807.623.3999 | E: [email protected]
http://www.thunderbay.ca
From: SnakEyez02 <[email protected]>
To: Ray Bakker <[email protected]>
Date: 02/11/2011 12:08 PM
Subject: Dreamweaver CS5.5 and SFTP
Re: Dreamweaver CS5.5 and SFTP
created by SnakEyez02 in Dreamweaver - View the full discussion
So based on this last post you are able to connect but you are not able to
transfer files. And based on the error I will assume uploading new files
is ok, it's just the overwriting that is causing an issue or uploading,
even new files, to a specific folder is causing an issue. Can you verify
that the ownership settings are correct on your account (you may need to
contact your host to fix if this is the issue)?
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/4003679#4003679]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/4003679#4003679]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver by email or at Adobe Forums
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.
The information transmitted by electronic communication is intended
only for
the person or entity to which it is addressed and may contain
confidential
and/or privileged material. The sender does not waive any related
rights or
obligations. Any review, re-transmission, dissemination or other
use of, or
taking of any action in reliance upon this information, by persons
or entities
other than the intended recipient, is prohibited. If you received
this in
error, please contact the sender and delete the material from any
computer -
Floating divs and scroll bar in div
I've been searching the postings and can't find an answer to
this. I'm trying to make #content a div that, when content is too
much for the div, scroll bar will appear and not expand the entire
design. I assigned a height to the div and added overflow:auto; but
it still doesn't work. Please advise! Thank you...again....
http://www.nsbcustomjewelry.com/DIVTEST.shtmlYou page is completely broken in Firefox and IE7.
You will need to go through your container widths because
they are not
correct. In FF for example, you can't see the right sidebar
nav, in IE7,
the content area is being dropped down.
If you remove the margin-left: 175px; from #content and
change the width to
around 322px; it moves it into position correctly, but you
need to narrow
the width of the #leftnav to at least 155px;
Work out the rest of your widths and the right sidebar should
show up ok.
The scrollbar does show up once you narrow down the width of
the content
area. At the moment, there's not enough content in there (at
the width you
have) to invoke a scrollbar.
Hope this helps :)
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
"SisAndi" <[email protected]> wrote in
message
news:f4783n$5ln$[email protected]..
> I've been searching the postings and can't find an
answer to this. I'm
> trying
> to make #content a div that, when content is too much
for the div, scroll
> bar
> will appear and not expand the entire design. I assigned
a height to the
> div
> and added overflow:auto; but it still doesn't work.
Please advise! Thank
> you...again....
>
>
http://www.nsbcustomjewelry.com/DIVTEST.shtml
> -
I need help importing navigation bars and rollover buttons from fireworks?
I need help importing navigation bars and rollover buttons from fireworks, drop down menus and rollover states won't work!
ThanksIn my experience, the code created by graphics apps is less than satisfactory. And image based menus are very awkward for several reasons.
#1 If you decide to change your menu later, you must go back to your graphics app and re-craft the whole thing. After 2-3 times of this, it gets old in a hurry.
#2 Image based menus cannot be "seen" by search engines, screen readers and language translators.
#3 CSS styled text menus are better for your site's visibility, accessibility and they are a snap to edit in Dreamweaver.
That said, if you're still married to image based menus, use Fireworks to create images only. Use Dreamweaver's Image Rollover Behaviors to create your rollover scripts.
Nancy O. -
Issue with container divs, and absolute/fixed positioning
Hello everyone, I have an issue getting my divs to function properly. I have a container div and I want the table div to float inside (and move with page resize). Right now it doesnt move with the page (see photo).
However, when I change the position to relative of that div, it moves under the container div and locks itself there.(Second photo)
Any help would be great! Thanks!
Picture one:
Picture two
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<!-- TemplateBeginEditable name="doctitle" -->
<title>davide marchetti architetto</title>
<!-- TemplateEndEditable -->
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1/jquery.js"></script>
<link href="ttp://mottie.github.com/tablesorter/css/theme.blue.css" rel="stylesheet">
<script type="text/javascript" src="http://mottie.github.com/tablesorter/js/jquery.tablesorter.js"></script>
<script type="text/javascript" src="http://mottie.github.com/tablesorter/js/jquery.tablesorter.widgets.js"></script>
<script type="text/javascript">
$(document).ready(function()
$("#myTable").tablesorter();
</script>
<style type="text/css">
body {
font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
background-color: #FFFFFF;
margin: 0;
padding: 0;
color: #000;
background-image: url();
background-repeat: no-repeat;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
padding-right: 15px;
padding-left: 15px; /* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
color:#414958;
text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
color: #4E5869;
text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
text-decoration: none;
/* ~~ this container surrounds all other divs giving them their percentage-based width ~~ */
.container {
width: 80%;
max-width: 1260px;/* a max-width may be desirable to keep this layout from getting too wide on a large monitor. This keeps line length more readable. IE6 does not respect this declaration. */
min-width: 780px;
margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout. It is not needed if you set the .container's width to 100%. */
/* ~~ This is the layout information. ~~
1) Padding is only placed on the top and/or bottom of the div. The elements within this div have padding on their sides. This saves you from any "box model math". Keep in mind, if you add any side padding or border to the div itself, it will be added to the width you define to create the *total* width. You may also choose to remove the padding on the element in the div and place a second div within it with no width and the padding necessary for your design.
.content {
padding: 10px 0;
font-size: x-small;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
padding: 0 15px 15px 40px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
float: left;
margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the overflow:hidden on the .container is removed */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
body,td,th {
font-family: "Courier New", Courier, monospace;
font-size: 12px;
#apDiv1 {
position: relative;
width: 618px;
height: 268px;
z-index: 1;
left: 186px;
top: 147px;
overflow: hidden;
#apDiv2 {
position: relative;
width: 698px;
height: 299px;
z-index: 1;
left: 266px;
top: 117px;
overflow: scroll;
table.tableizer-table {
border: 1px solid #CCC; font-family: Courier New, Courier, monospace;
font-size: 12px;
.tableizer-table td {
padding: 4px;
margin: 3px;
border: 1px solid #ccc;
.tableizer-table th {
background-color: #000000;
color: #FFF;
font-weight: bold;
#apDiv4 {
position: relative;
width: 697px;
height: 299px;
z-index: 1;
left: -141px;
top: -636px;
overflow: scroll;
#apDiv3 {
position: relative;
width: 700px;
height: 300px;
z-index: 2;
h1,h2,h3,h4,h5,h6 {
font-family: "Courier New", Courier, monospace;
</style>
<!-- TemplateBeginEditable name="head" -->
<!-- TemplateEndEditable -->
</head>
<div class="container">
<div class="container"><img src="../images/Davide.png" width="800" height="600" usemap="#Map" border="0" />
<div id="apDiv2">
<map name="Map" id="Map">
<area shape="rect" coords="48,416,125,435" href="../news.html" />
<area shape="rect" coords="262,416,304,436" href="../studio.html" />
<area shape="rect" coords="490,416,545,435" href="../projects.html" />
<area shape="rect" coords="702,415,751,436" href="../contact.html" />
</map>
<table id="myTable" class="tableizer-table">
<thead>
<tr class="tableizer-firstrow">
<th>YEAR </th>
<th>PROJECT</th>
<th>LOCATION</th>
<th>CATEGORY</th>
<th>STATUS</th>
</tr>
</thead>
<tbody>
<tr>
<td>2013</td>
<td>EXPO 2015 - Italian Pavilion</td>
<td>Milan - Italy</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td>2012</td>
<td>Requalification of "Almerici", "Bufalini" and "Fabbri" Squares</td>
<td>Cesena - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Re-thinking Shanghai: sustainable intervention along the Suzhou Creek</td>
<td>Shanghai - China</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>VCC Flat</td>
<td>Rome - Italy</td>
<td>Interior design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td>2011</td>
<td>London 2012 Olympic Games Information Pavilion</td>
<td>London - UK</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Enhancement project for the sacred area of the sanctuary of Hercules Victor</td>
<td>Tivoli - Italy</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td>2010</td>
<td>VTL Flat </td>
<td>Rome - Italy</td>
<td>Interior design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td> </td>
<td>BNC Flat</td>
<td>Rome - Italy</td>
<td>Interior design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td> </td>
<td>Expansion of the "Farnesina" High School</td>
<td>Rome - Italy</td>
<td>Education</td>
<td>Competition / Selected Project</td>
</tr>
<tr>
<td> </td>
<td>Neanderthal Art Center</td>
<td>Pilo�a - Spain</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>New pedestrian & cycling footpath in the site of the "San Leopoldo II" old bridge</td>
<td>Poggio a Caiano - Italy</td>
<td>Infrastructure</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Proposition 2065 - St. Leonards site</td>
<td>Sidney - Australia</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>MEIS - National Museum of Italian Judaism and Shoah </td>
<td>Ferrara - Italy</td>
<td>Culture</td>
<td>Competition / 3rd Prize</td>
</tr>
<tr>
<td> </td>
<td>36 The Calls Design Competition</td>
<td>Leeds - UK</td>
<td>Offices</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Europan 10: masterplan for an harbour area</td>
<td>Rudk�bing - Denmark</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td>2009</td>
<td>"Scuola in Piazza a Levante" - Kindergarten and public areas</td>
<td>Bisceglie - Italy</td>
<td>Education</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>CIBAF - City of Kids </td>
<td>Frattamaggiore - Italy</td>
<td>Education</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Designing in Teheran</td>
<td>Teheran - Iran</td>
<td>Mixed use</td>
<td>Competition / Selected Project</td>
</tr>
<tr>
<td>2008</td>
<td>DawnTown 2008: Waterworks</td>
<td>Miami - USA</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Venice Biennale New Australian Pavillion</td>
<td>Venice - Italy</td>
<td>Culture</td>
<td>Competition / 1st Prize</td>
</tr>
<tr>
<td> </td>
<td>New pedestrian and cycling bridge</td>
<td>Civita di Bagnoregio - Italy</td>
<td>Infrastructure</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Renovation of "San Ciro" Square</td>
<td>Portici - Italy</td>
<td>Urban planning</td>
<td>Competition / 2nd phase selected / 3rd Prize</td>
</tr>
<tr>
<td> </td>
<td>Renovation of "Umberto I�" Square</td>
<td>San Ferdinando di Puglia - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Historic Renovation of the "Corsie Sistine" Hospital Wards </td>
<td>Rome - Italy</td>
<td>Culture</td>
<td>Tender Competition (design/bid/build)</td>
</tr>
<tr>
<td> </td>
<td>Cupboard</td>
<td>Rome - Italy</td>
<td>Furniture design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td> </td>
<td>Office table and lighting system</td>
<td>Rome - Italy</td>
<td>Furniture design</td>
<td>Commission / Built</td>
</tr>
<tr>
<td> </td>
<td>New City Library</td>
<td>Legnano - Italy</td>
<td>Library</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Office table</td>
<td>Rome - Italy</td>
<td>Furniture design</td>
<td>Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Volleyball Arena, Hotel and Commercial Spaces</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Concept Design</td>
</tr>
<tr>
<td>2007</td>
<td>New Provincial Archaeological Museum in the Santa Scolastica Monastery</td>
<td>Bari - Italy</td>
<td>Culture</td>
<td>Competition / 5th Prize</td>
</tr>
<tr>
<td> </td>
<td>The City of Water and Health</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Parkway Iconic Bridge</td>
<td>Sheffield - UK</td>
<td>Infrastructure</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Renovation of "Loveno 84" Sport Center</td>
<td>Menaggio - Italy</td>
<td>Sport</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>"Guardia di Finanza" Corp Main Headquarters</td>
<td>Catanzaro - Italy</td>
<td>Mixed use</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>"Lega Lombarda" Real Estate Complex Urban Development</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Tender Competition (design/bid/build) </td>
</tr>
<tr>
<td> </td>
<td>Necklace</td>
<td>Rome - Italy</td>
<td>Jewellery design</td>
<td>Prototype </td>
</tr>
<tr>
<td> </td>
<td>Moon putter</td>
<td>Rome - Italy</td>
<td>Product design</td>
<td>Prototype</td>
</tr>
<tr>
<td> </td>
<td>Aleale Coffee Table</td>
<td>Rome - Italy</td>
<td>Furniture design</td>
<td>Concept Design</td>
</tr>
<tr>
<td>2006</td>
<td>"1st October" Public Square</td>
<td>Santa Maria Capua Vetere - Italy</td>
<td>Urban planning</td>
<td>Competition / 1st Prize / Built</td>
</tr>
<tr>
<td> </td>
<td>"Attilio Pecile" New Square and Sustainable Mixed Use Building</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Competition / 1st Prize</td>
</tr>
<tr>
<td> </td>
<td>Renewal of the "Porta Nuova" Old Tower</td>
<td>Venice - Italy</td>
<td>Culture</td>
<td>Competition / 2nd Prize</td>
</tr>
<tr>
<td> </td>
<td>"Meno e pi� 4": Civic Center and Pre-school Building</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Competition / Mention</td>
</tr>
<tr>
<td> </td>
<td>Urban Renewal of Historic Building and Public Squares</td>
<td>Conversano - Italy</td>
<td>Urban planning</td>
<td>Competition / 2nd Prize</td>
</tr>
<tr>
<td> </td>
<td>New Seafront and Beach Accesses</td>
<td>Fregene - Italy</td>
<td>Urban planning</td>
<td>Competition / Mention</td>
</tr>
<tr>
<td> </td>
<td>Requalification of Main Streets and Squares of the Old City Centre</td>
<td>Bari - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Gyeonggi-do Jeongok Prehistory Museum</td>
<td>Jeongok-ri - South Korea</td>
<td>Culture</td>
<td>Competition / Honourable Mention</td>
</tr>
<tr>
<td> </td>
<td>Low-income housing development</td>
<td>Guadalajara/Ceuta - Spain</td>
<td>Residential</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Shop extension</td>
<td>Rome - Italy</td>
<td>Retail</td>
<td>Commission / Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Temporary Concert Hall</td>
<td>Rome - Italy</td>
<td>Culture</td>
<td>Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Office Space Interior Design - New Seat of the Lombardy Regional Government </td>
<td>Milan - Italy</td>
<td>Office</td>
<td>Tender Competition (design/bid/build)</td>
</tr>
<tr>
<td>2005</td>
<td>Europan 8 - Urban Requalification</td>
<td>Istanbul - Turkey</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Natural Park Visitor Center, Kindergarten and Primary School</td>
<td>Funes - Italy</td>
<td>Education</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Coastal Area Development</td>
<td>Latina - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Requalification of Three Squares</td>
<td>Benevento - Italy</td>
<td>Urban planning</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Office and Data Center New Building in the Ministry of Defense headquarters</td>
<td>Rome - Italy</td>
<td>Office</td>
<td>Concept Design</td>
</tr>
<tr>
<td>2004</td>
<td>JCD Floating Pearl Store</td>
<td>Tokio - Japan</td>
<td>Retail</td>
<td>Competition / 2nd phase selected </td>
</tr>
<tr>
<td> </td>
<td>Requalifications of Rome�s Beachfront and Coastal Areas</td>
<td>Ostia - Italy</td>
<td>Urban planning</td>
<td>Competition / 1st Prize</td>
</tr>
<tr>
<td> </td>
<td>40 Apartments Building and Sport Center</td>
<td>Rome - Italy</td>
<td>Mixed use</td>
<td>Competition / 2nd Prize</td>
</tr>
<tr>
<td> </td>
<td>nMBA New Beaux-Art Museum</td>
<td>Lausanne - Switzerland</td>
<td>Culture</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>The Dubai Residence and Hotel Towers</td>
<td>Dubai - UAE</td>
<td>Mixed use</td>
<td>Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Shoes and Accessories Shop</td>
<td>Rome - Italy</td>
<td>Retail</td>
<td>Commission / Concept Design</td>
</tr>
<tr>
<td>2003</td>
<td>Pedestrian and cycling Bridge </td>
<td>Rome - Italy</td>
<td>Infrastructure</td>
<td>Competition</td>
</tr>
<tr>
<td> </td>
<td>Temporary Pavillion for a Car Show</td>
<td>Rome - Italy</td>
<td>Retail</td>
<td>Commission / Concept Design</td>
</tr>
<tr>
<td> </td>
<td>Belvedere Tower</td>
<td>Castellammare di Stabia - Italy</td>
<td>Infrastructure</td>
<td>Concept Design</td>
</tr>
</tbody>
</table>
</div>
</div>
<!-- end .container --></div>
</body>
</html>#apDiv2 {
position: absolute;
width: 698px;
height: 299px;
z-index: 1;
left:50px;
top: 117px;
overflow: scroll;
Don't forget to fix your code errors. You're still missing a <body> tag in your markup.
Nancy O. -
I have a table that contains data parsed for a weather station page. It also has a webcam picture on the page. Up until now, the webcam pic has loaded via an applet but I want to change that to a jquery slideshow so it's accessible to more mobile devices. My problem is that no matter what I do (aside from putting a 5x240 spacer) I can't get the table data to display below the webcam div (id="featured"). I've put the webcam and data table in their own div, the webcam's div in the table, used clear:both on the divs, tried setting block size, but it's like nothing is working. So I'm back to go and thought I'd post it here since there are so many folks here who know more about this than me. This is the html, right now with no CSS classes or anything added. So whatever you would suggest as far as div and/or table layout and any CSS would be appreciated.
<table width="100%" cellpadding="3">
<tr align="center"><td >
<div id="featured"> <a href="http://www.spyglasshill.com/Webcam/" target="_new"><img src="http://spyglasshill.com/Webcam/netcam.jpg" alt="Webcam of Holland Channel from Spyglass Condos" width="320" height="253" border="0" id="Img0" /></a>
<a href="http://www.spyglasshill.com/Webcam/" target="_new"><img src="http://spyglasshill.com/Webcam/netcam-9.jpg" alt="Webcam of Holland Channel from Spyglass Condos" width="320" height="253" border="0" id="Img10" /></a>
<a href="http://www.spyglasshill.com/Webcam/" target="_new"><img src="http://spyglasshill.com/Webcam/netcam-8.jpg" alt="Webcam of Holland Channel from Spyglass Condos" width="320" height="253" border="0" id="Img9" /></a>
<a href="http://www.spyglasshill.com/Webcam/" target="_new"><img src="http://spyglasshill.com/Webcam/netcam-7.jpg" alt="Webcam of Holland Channel from Spyglass Condos" width="320" height="253" border="0" id="Img8" /></a>
<a href="http://www.spyglasshill.com/Webcam/" target="_new"><img src="http://spyglasshill.com/Webcam/netcam-6.jpg" alt="Webcam of Holland Channel from Spyglass Condos" width="320" height="253" border="0" id="Img7" /></a>
<a href="http://www.spyglasshill.com/Webcam/" target="_new"><img src="http://spyglasshill.com/Webcam/netcam-5.jpg" alt="Webcam of Holland Channel from Spyglass Condos" width="320" height="253" border="0" id="Img6" /></a>
<a href="http://www.spyglasshill.com/Webcam/" target="_new"><img src="http://spyglasshill.com/Webcam/netcam-4.jpg" alt="Webcam of Holland Channel from Spyglass Condos" width="320" height="253" border="0" id="Img5" /></a>
<a href="http://www.spyglasshill.com/Webcam/" target="_new"><img src="http://spyglasshill.com/Webcam/netcam-3.jpg" alt="Webcam of Holland Channel from Spyglass Condos" width="320" height="253" border="0" id="Img4" /></a>
<a href="http://www.spyglasshill.com/Webcam/" target="_new"><img src="http://spyglasshill.com/Webcam/netcam-2.jpg" alt="Webcam of Holland Channel from Spyglass Condos" width="320" height="253" border="0" id="Img3" /></a>
<a href="http://www.spyglasshill.com/Webcam/" target="_new"><img src="http://spyglasshill.com/Webcam/netcam-1.jpg" alt="Webcam of Holland Channel from Spyglass Condos" width="320" height="253" border="0" id="Img2" /></a>
<a href="http://www.spyglasshill.com/Webcam/" target="_new"><img src="http://spyglasshill.com/Webcam/netcam-0.jpg" alt="Webcam of Holland Channel from Spyglass Condos" width="320" height="253" border="0" id="Img1" /></a> <!--end div featured--></div>
</td></tr>
<tr>
<td><img src="images/spacer5x260.gif" width="5" height="260"></td></tr>
<tr>
<td colspan="4"><p align="center"><a href="images/06/Waterspout/Waterspouts.htm"><br />
</a></p>
<div align="center">
<p><a href="images/Waterspout/Waterspouts.php">Waterspout on Lake Mich </a>||| <a href="images/ANIFreighter.gif">Freighter Leaving Harbor</a><br />
</p>
</div></td>
</tr>
<tr>
<td colspan="4" bgcolor="#EAEFF9"><div align="center">
<h2>Weather Conditions Last Updated wvcurudwv at wvcurutwv </h2>
</div></td>
</tr>
<tr>
<td><div align="right"> Temperature </div></td>
<td><div align="left"> wvcur01wv </div></td>
<td><div align="right"> Wind Speed </div></td>
<td><div align="left"> wvcur18wv </div></td>
</tr>
<tr>
<td><div align="right"> Average High </div></td>
<td><div align="left"> wvahtempwv </div></td>
<td><div align="right"> Wind Direction </div></td>
<td><div align="left"> wvcur17wv </div></td>
</tr>
<tr>
<td><div align="right"> Record High </div></td>
<td><div align="left"> wvrhtempwv in
wvrhtyrwv </div></td>
<td><div align="right"> Peak Wind Gust </div></td>
<td><div align="left"> wvhigh18wv at
wvhight18wv </div></td>
</tr>
<tr>
<td><div align="right"> High
Since Midnight </div></td>
<td><div align="left"> wvhigh01wv
at wvhight01wv </div></td>
<td><div align="right"> Wind Chill Factor </div></td>
<td><div align="left"> wvcur02wv </div></td>
</tr>
<tr>
<td><div align="right"> Low </div></td>
<td><div align="left"> wvlow01wv
at wvlowt01wv </div></td>
<td><div align="right"> Yesterday Max Wind </div></td>
<td><div align="left"> wvyhigh18wv at wvyhight18wv </div></td>
</tr>
<tr>
<td><div align="right"> Rainfall Since
Midnight </div></td>
<td><div align="left"> wvcur16wv </div></td>
<td><div align="right"> Relative Humidity </div></td>
<td><div align="left"> wvcur13wv </div></td>
</tr>
<tr>
<td><div align="right"> Rainfall Yesterday </div></td>
<td><div align="left"> wvyhigh16wv </div></td>
<td><div align="right"> Barometric Pressure </div></td>
<td><div align="left"> wvcur15wv </div></td>
</tr>
<tr>
<td><div align="right"> Sunrise </div></td>
<td><div align="left"> wvsrisewv </div></td>
<td><div align="right"> Heat Index </div></td>
<td><div align="left"> wvcur04wv </div></td>
</tr>
<tr>
<td><div align="right"> Sunset </div></td>
<td><div align="left"> wvssetwv </div></td>
<td><div align="right"> Dew Point </div></td>
<td><div align="left"> wvcur03wv </div></td>
</tr>
<tr>
<td> </td>
<td> </td>
<td> </td>
<td> </td>
</tr>
<tr>
<td> </td>
<td>Moon
distance from earth</td>
<td><span>wvmdistwv</span></td>
<td> </td>
</tr>
<tr>
<td><h2> </h2></td>
<td><h2> </h2></td>
<td><h2> </h2></td>
<td><h2> </h2></td>
</tr>
<tr>
<td><h2><a href="http://www.coastwatch.msu.edu/twomichigans.html" target="_blank">Lake
Michigan<br />
Water Temp</a></h2></td>
<td><h2><a href="http://www.woodtv.com/Global/category.asp?C=2906&nav=0Rcf">TV
8</a> & <a href="http://www.wzzm13.com/weather/forecast/weather.asp">TV13</a> Weather </h2></td>
<td><h2><a href="http://www.deq.state.mi.us/beach/Default.aspx?County=70" target="_blank">Ottawa County Beach Conditions</a></h2></td>
<td><h2><a href="http://www.crh.noaa.gov/product.php?site=grr&product=nsh&issuedby=grr" target="_blank">Nearshore
Marine Forcast</a></h2></td>
</tr>
</table>Of course as soon as I posted that, I found the error of my ways. I had forgotten to set containerheight: on my .js script for 'div#featured'
Arrrghh, why couldn't I have realized that a hour ago!!! -
Use of user status and business actions
Hi all,
I'm new at status profiles, user status and business actions.
Currently we are using status profiles and user status for orders - but business actions aren't assigned to the user status. In a project I should evaluate whether we can use those business actions.
After reading a lot of documentations there is still one question left. What are the business-actions for and how can I use them?
Let's say I've a status profile with following user status with according business actions:
- status: new; business action: to progress
- status: in progress; business action: to confirm
- status: confirmed; business action: decline or close
- status: closed; business action: close
What happens when a user sets the status of an order to "confirmed"? Will be done additional checks for my order? - If yes: Wich checks will be done and exists there an API to effect these checks or to implement additional checks?
Regards,
ChristianChristian;
If you´re wanting to speak about Status Profile in OP. You can execute whole theses steps in T-code BS02, when in this IMG:
1. Enter a Status Profile.
2. Assign the status profile to an Object Type.
3. Define the User Status.
4. Assign Business Transactions to user statuses.
5. Translate the status profile and user statuses.
You can also to use this function to simulate the status development for a particular object.
To do this, select a status profile and branch to the screen "Allowed Object Types". Then place the cursor on one of the object types.
Using the function Extras -> Status simulation, you can simulate the status changes that could be caused by performing various business transactions, or by changing the staus manually, during the lifetime of the object concerned.
You can also branch directly from simulation to status maintenance for the object concerned, to display information on which transactions are allowed or disallowed in the current situation.
The log function records all the changes you simulate and allows you to navigate freely to see what effects these are having.
Status profile info
Using the function Extras -> Status profile info, you can display a list of all the entries you have made for a particular status profile. The list is structured as follows:
The first block contains the permitted object types.
The second block contains the user statuses.
The third block contains the following information for each user status:
which transactions it allows
which transactions it allows with a warning
which transactions it disallows.
I hope help to you
Regards
Luciano Nobrega -
My backup external hard drive hasn't work since I insalled Snow Leopard. Bad:( I am still learning about my MAC and would just like to re-format the hard dive and set everything up again. I want to upgrade to Lion but can't untill I backup what I.
Read through the links here, calm down and take your time.
https://discussions.apple.com/community/notebooks/macbook_pro?view=documents
Maybe you are looking for
-
Videos wont load or play on macbook pro, videos wont load or play on macbook pro
Cant view web videos
-
BPM: Transformation Error with Interfaces/ MT's in different namespaces
Hi all, Developing an integration process on XI 3.0 SP20 I'm facing following problem: I've created a transformation mapping interfaces/ message types from different software components/ namespaces. Softwarecomp. 1 is used for the mappings and integr
-
Completely new to Soundtrack Pro - need help for school project
I've never used Soundtrack Pro before, but I need to record and modify some dialogue for a project for one of my classes, and I think that's the only audio program we have on the computers in the lab I'm using. Can I use Soundtrack Pro to record myse
-
Presenting project in PDF with a lengthy gap
Hello, I have created a Project, there was a lengthy gap where the project was on hold, as a result the project extends to 250 days. My question is how do I present this Project without the huge gap? Currently, when I export to PDF, there are many bl
-
Hi, I doubt in Interface. Interface means : Only Method declaration & static final variable, there is no implementation of the methods. When we use it in the class, then we have to implement that method in our class, insted of that we can directly wr