Dreamweaver & BC product option design help

Hi everyone, hope we are all well?
I have been building non e-commerce websites for a long time, i would say im above average at the job but i need some help as i take on my first e-commerce.
Im using Business Catalyst and Dreamweaver CC and the site is for my new business, what im aiming to do may be reaching for the stars for someone with my experience but this is where i hope you clever boys and girls can help me out.
I want the create a product page where the customer can configure their purchase, but i want to make it extremely user friendly. Im selling a lot of cool products but the focus of this part is built to order computers, i want to create a check out so only one option (ie. processor, hdd, case etc) is up at a time almost on different tabs, then you hit next/ back to move on/or back is this possible? Its like Dell/Alienware's old configuration, It would also be nice to have the price update as they select an option.
I have set up all my products on BC and before i go any further with designing my site i wanted to get this bit nailed, so any ideas?
Sorry if this is the wrong place to post but im sure dreamweaver has something to do with it,
Pulled this of the net, so it looks like this....
Any help would be a great help :-)
Have a good one.

Thank you

Similar Messages

Non-profit needs Dreamweaver design help

Small non-profit serving homeless veterans and veterans in crisis needs design help with Dreamweaver website. The website was created as a school project by university students but there are some design issues that we are not able to correct.

It appears to be template driven so the basic layout is inside your site folder's Templates directory -- main.dwt. This file drives the site wide elements such as navigation, common headers, footers and sidebars.
Child pages created from that main.dwt file contain editable regions for content that will change from page to page. Only content in these editable regions are editable from child pages.
Whoever will be responsible for updating content should get familiar with CSS & HTML code. This is required knowledge to work with Dreamweaver.
Start here:
HTML & CSS Tutorials - http://w3schools.com/
Code validation tools
http://jigsaw.w3.org/css-validator/
http://validator.w3.org/
Also thoroughly read DW's Help docs (F1) under working with DW Templates.
It looks like the students did a pretty fair job of building the basic site for you. Now it's up to your org to swap out the generic stuff with relevant content. I don't advise you to alter the basic layout or structure. It's all there. You just need to get up to speed on how to work with it.
Nancy O.

CS3 Design Standard - Unable deactivate on OLD PC in order to activate on NEW PC. Deactivate is not an option under HELP

I have read the guidelines to deactivate CS3 on old PC before being able to re-activate on NEW PC. However in my CS3 there is no 'deactivate' option under HELP. Had chat with Adobe Tech Support, and they confirmed I should uninstall CS3 from old PC and then it could be re-activated on NEW PC. This has now been done - however still same error message, that need to deactivate on old PC (which no longer has CS installed!). Anybody been through same ordeal?

if you see an activation count message when you try to activate cs3, contact adobe support by clicking this link and then clicking 'still need help' as soon as it appears, https://helpx.adobe.com/contact.html and request an activation count reset.

Planning "Configure Product Option" using configuration utility

Hi All,
I have installed HSS on server1 and Planning, Oracle DB in server 2.
Done the HSS configuration and i can able to log into HSS successfully. When i tried to configure my planning,
1. Open the EMP system configurator from planning server
2. Select Hyperion Foundation ( Configure DB, Common database). Here by default "Previousely configure the DB" was secected and configuration was success.
3. Next select planning "Configure Product Option" was not success.
Register with shared service was failed.
getting following error messages.
(Jul 24, 2011, 00:29:22 PM), com.hyperion.cis.config.CmsRegistrationUtil, ERROR, Authentication failed:
com.hyperion.interop.lib.OperationFailedException: Unable to Authenticate.Unable to Authenticate.
     at com.hyperion.interop.lib.helper.RegistrationHelper.register(Unknown Source)
     at com.hyperion.interop.lib.CMSClient.register(Unknown Source)
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:142)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Jul 24, 2011, 00:29:22 PM), com.hyperion.cis.config.wizard.RunAllTasksWizardAction, ERROR, Error:
java.lang.Exception: Unable to Authenticate.Unable to Authenticate.
     at com.hyperion.cis.config.CmsRegistrationUtil.registerProduct(CmsRegistrationUtil.java:154)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.executeHubRegistrationTask(RunAllTasksWizardAction.java:452)
     at com.hyperion.cis.config.wizard.RunAllTasksWizardAction.execute(RunAllTasksWizardAction.java:236)
     at com.installshield.wizard.RunnableWizardBeanContext.run(Unknown Source)
(Jul 24, 2011, 00:32:12 PM), com.hyperion.audit.client.exception.AuditLoggingHandler, ERROR, XML-RPC failed
org.apache.xmlrpc.XmlRpcException: org.apache.xmlrpc.XmlRpcException: null values not supported by XML-RPC
     at org.apache.xmlrpc.XmlRpcClientResponseProcessor.decodeException(XmlRpcClientResponseProcessor.java:104)
     at org.apache.xmlrpc.XmlRpcClientResponseProcessor.decodeResponse(XmlRpcClientResponseProcessor.java:71)
     at org.apache.xmlrpc.XmlRpcClientWorker.execute(XmlRpcClientWorker.java:73)
     at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:194)
     at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:185)
     at org.apache.xmlrpc.XmlRpcClient.execute(XmlRpcClient.java:178)
     at com.hyperion.audit.client.AuditXmlRpcClient.pingServerForStartUp(Unknown Source)
     at com.hyperion.audit.client.runtime.PingForServerStartUp.run(Unknown Source)
Please help me to solve this issue.
Thanks in Advance,
GTS.

Hi
Assuming this is 11.1.2.1 env.For Planning were you able to
Deploy to app server
Configure database

How to Disable\Remove Registration option under Help menu in Lightroom 5.3

Hi,
Could someone kindly guide as to how can we remove\Disable the Lightroom Registration option under help menu for Adobe lightroom 5.3?
I intend to deploy the application for enterprise users and do not wish that the users should be able to see the Serial number or try registering the product on thier own.
I know this can be done for Adobe CS6 and CS5 using the AAMEE tool which again does not work for Lightroom.
Is there any tool from Adobe or any registry key/File to suppress this option.
Kindly Advice.
Thanks in Advance!

Currently, there isn't a way to do this. But this has reacently become a common feature request and we are working to get it added.

Dreamweaver: cannot find CSS Designer

I need some help. I am trying to find the tab or panel that allows me to use the CSS Designer. I try to follow the videos that Adobe posts on learning how to use Dreamweaver, but it doesn't help a lot cause i can never find any of the buttons the videos are using. Espcially now, I cannot find the tool to allow to edit using CSS. I need some help here.

Go to Window > CSS Designer or hit Shift + F11 to open the CSS Designer.
If those don't bring it up, you're likely using a version that is older than the addition of the CSS Designer (DWCS6 or earlier).
Go to Help > About Dreamweaver to check your version.
If you do have CC or later and only get the old CSS Panel when you go to that menu or hit the shortcut, it would mean you need to hit Ctrl + Alt + Shift + P to switch the CSS Panel to the Designer.

I am currently a full time college student and last term I had access to the creative cloud products, when I attempt to access InDesign I am asked to purchase products. Please help.

I am currently a full time college student and last term I had access to the creative cloud products, when I attempt to access InDesign I am asked to purchase products. Please help.

Do you have a subscription that you purchased and still pay into? If so, contact Adobe support thru chat and see if they can assist you with your subscription.
Chat support - For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )
Did the school provide your access for free? If so, check with the school to see if they still provide free access to the software for students.
If neither of the above situations match yours, please provide more detail regarding what gave you access to the software.

Design Help / Education

Does anyone know if Adobe offers any design education
I need some basic design help using Dreamweaver (as I am
having issues migrating from Go Live)
If not Adobe, are there any experienced DW users out there?
thanks

Experienced DW users? Well, yeah.
What do you need?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"golfingdad" <[email protected]> wrote in
message
news:gefblj$2pt$[email protected]..
> Does anyone know if Adobe offers any design education
>
> I need some basic design help using Dreamweaver (as I am
having issues
> migrating from Go Live)
>
> If not Adobe, are there any experienced DW users out
there?
>
> thanks
>

Adobe creative Cloud photshop cs 6 register user iam not getting COPY CSS options please help

iam adobe creative cloud photshop cs 6 register user iam not getting COPY CSS options even i have updated photoshop several times
still not getting this options please help
Thanks
Koushik

13.0.1 is the last version of Photoshop to run on Windows XP but it does not include the Copy CSS feature.
The Copy CSS feature was first introduced in Photoshop 13.1 (Cloud only) and higher.
http://blogs.adobe.com/jkost/2013/02/copy-css-attributes-in-photoshop-13-1.html
Photoshop 13.1 does not run on Windows XP. So your operating system is preventing you from upgrading Photoshop to 13.1+.
http://helpx.adobe.com/photoshop/kb/new-system-requirements-photoshop-131.html
If you plan to remain a Cloud member then you will have to upgrade to Windows 7 or Windows 8 (or get a new computer) very soon in order to run Photoshop CC to be released on June 17, 2013.

Can i have html code for date select options (SEARCH HELP)

Hi frinds,
I have a BSP Page with input as date.
Can i have html code for date select options (SEARCH HELP)
Moosa

Hi
Please find the sample code below.
FROM DATE
      <htmlb:inputField id        = "dd"
                        width     = "45%"
                        type      = "DATE"
                        showHelp = "X" <- Search help
                        alignment = "CENTER"
                        maxlength = "10"
                        disabled = "TRUE"
                        value     = "<%= w_FROMDATE %>" />
TO DATE
      <htmlb:inputField id        = "dd"
                        width     = "45%"
                        type      = "DATE"
                        showHelp = "X"
                        alignment = "CENTER"
                        maxlength = "10"
                        disabled = "TRUE"
value     = "<%= w_TODATE %>" />
Thanks
kalyan

I just paid for Adobe PDF pack and I think I am having problems installing. When I select to print from word, PDF is not an option. Help!

I just paid for Adobe PDF pack and I think I am having problems installing. When I select to print from word, PDF is not an option. Help!

Hi voltric2014,
If you are on Windows, you can download and install the CreatePDF Desktop Printer, which would allow you to "print" to PDF from Word. You'll find a link to the installer on the CreatePDF page at https://cloud.acrobat.com. Here are the instructions for installing it: Using Adobe PDF Pack
Please let us know if you have additional questions.
Best,
Sara

Unable to toggle between LiveCycle Designer & Help

If we opened the LiveCycle Designer Help window, we are unable to switch to the Designer util the help window is minimized. This is slightly annoying the developers.
It would be better if it can behave like other applications (e.g. Adobe Workbench ES)
Thanks,
Nith

Charlie
I am unable to duplicate the problem you are experiencing. I was able to use Acrobat Pro 9 and X, to apply the Reader Extension permissions (to the sample form I posted earlier) and open and sign the form in both Reader 9 and X.
What is the exact version of Acrobat you are using to apply the Reader Extension rights. The dialog I see when doing so with Acrobat 9 Pro is...
If you are using Acrobat Standard, it seems there is a limitation (save data only) on the Reader Extension permissions that you can apply.
Regards
Steve

Does anybody know of a product that can help scratchs?

does anybody know of a product that can help scratchs?

Well this guy took most scratches off http://todd.dailey.info/archives/2005/09/27/restore-your-ipod-nano-to-new-condit ion-with-a-4-can-of-brasso/

I have installed Adobe Acrobat XI on citrix (server 2008, x64) and need to suppress repair option in Help menu for the users via registry.

i have installed Adobe Acrobat XI on citrix (server 2008, x64) and need to suppress repair option in Help menu for the users via registry. Have tried Disable_repair dword key in HKLM\software\Wow6432Node\Adobe\AdobeAcrobat\11.0\Installer and it does not work. please help.

Look in the ETK Preference Reference here: Installer settings

I like to pdf my score. I design my score properly, but then when I make the PDF it changes, in not correct design, help!

i like to pdf my score. I design my score properly, but then when I make the PDF it changes, in not correct design, help!
the same problem when normal printing

You have 90 days of free AppleCare telephone support, please call them. If you don't know the number please click AppleCare Contact Info to locate the number on your part of the planet.

Dreamweaver & BC product option design help

Similar Messages

Maybe you are looking for