Dreamweaver CC causes wordpress localhost to show a blank page

I have wordpress set  up using WAMP as the local server and it has been working with no problem. Win7 64 bit.
I have just installed Dreamweaver CC and set up testing sites using HTTP://localsite/sitename for several 'normal' website I manage and that was fine i could see them in live view.
I then added a local test site to view the website I manage under wordpress and when I went to live view all i could see was a blank page.
I then closed dreamweaver and just opened my local wordpress site using HTTP://localhost/wordpress and that too just showed a blank page.
I have no problem getting into my wordpress site via the local dashboard but cannot view any of the pages.
I searched the web and tried lots of workarounds but nothing worked. in the end i uninstalled worpress, deleted the wp databse and reinstalled everything with no problem.
Localhost was working with wrodpress again. However as soon as I tried to access the local wordpress site with dreamweaver the problem returned.
This is very frustrating as recreating a wordpress site is not as simple as just copying a load of HTML and PHP pages.
I should add there are no errors shown.
Anyone any ideas?

Hi Nancy,
thanks for taking the time to reply but unfortunately it does not help.
I have my wordpress files and themes in the correct directories for WAMP. I have been using WAMP to test my wordpress site for some time but opening up the PHP files in brackets to write the code. I have several non wordpress websites I maintain which are written in normal HTML, PHP and CSS and I like to code manually. It is useful tough to write the code in Brackets / Dreamweaver to check syntax and adjust the CSS on the fly.
Everything was working fine until I installed dreamweaver and set up a testing site as you indicate above and now all I get is a blank page not only in live view in dreamweaver but also if I simply type HTTP://loclahost/worpress directly into a browser window. There are no error meesages though not even a 404 'NOT Found' message, just a blank page. I can get into the dashborad though by typing http://localhost/wordpress/wp-admin/ and all my pages and content is there but if I try to view a page all i get is the same blank page.
As I said I said I totally unistalled wordpress including the database and reinstalled and all worked fine. I could see the site using http://localhost/wordpress/ but as soon as I set up a testing server in dreamweaver the problem returned. Dreamweaver must be altering something in the wordpress files / database to cause this problem.
Has no on else come across this?

Similar Messages

  • When i open firefox it open as well , but as well as i type any site(google,facebook etc with all sites ) its show a blank page only . please help me

    as well i open firefox , its open normally with no home page , but when i type any of the site it always show a blank page and loading circle is also round once (only one round) as before i didint face this problem because always loading circe round many times till page not open but now it round only once and page remain blank.

    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls

  • Hi, I've just installed mavericks but my HPc4180 will not print and is showing a 'blank' page in previews can anyone help me?

    Hi, I've just installed mavericks but my HPc4180 will not print and is showing a 'blank' page in previews can anyone help me?

    A few suggestions for you:
    Try:
    uninstall all HP utilities or other HP apps on your Mac
    see if there is updated software on the HP website
    go to System Preferences > Printers & Scanners > Print
    control-click on your printer in the column on the left
    select "Reset Printing System..." and "reset" in the dialog that follows
    Do a factory reset on your printer
    go back to printers & scanners and it should see your printer and download a driver for it from Apple

  • With brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

    with brand new iphone 4s when plugging into computer itunes shows a blank page with an apple logo in top left and a small lock in the top right. right clicking iphone under devices shows only eject.

    Having same issue here:
    https://discussions.apple.com/message/19043181#19043181

  • New hp envy all in one printer shows a blank page after scanning

    I just went through this problem with my old printer and hp sent me a refurbished (new) one. I go to scan something into my computer and it won't scan. It shows a blank page on preview. I checked the settings and they all seem to be right. I am not wanting to spend 3 hours with support and another 3 weeks to get a new printer. Can you help me?

    Please check the copying function. Is that blank.
    If the printer is copying blank there could be something else wrong with the Envy 120
    We have had reports of pages being placed upside down.
    The Envy 120 scans with the original facing up.
    Russ@HP
    Say thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution
    (Although I am employed by HP, I am speaking for myself and not for HP)
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++

  • I upgrade firefox from 7 to 8 and now when i start firefox everytime it opens "getting start with firefox" page, in options i select the option 'show a blank page" how can i resolve this issue?

    i upgrade firefox from version 7 to version 8, now when i start firefox everytime it open self the "getting start with firefox" website, in the options on firefox i select the 'show a blank page' but its not working. i am using firefox on windows XP- SP2.

    Try restarting Firefox, the one time page(s) after starting a new release should disappear. Actually this last time with 8.0 they did not come up for me.
    If that doesn't work then bring up '''about:config''' and place the url of the page into the filter. Right-click on anything that comes up and use "Reset".

  • Why does firefox many times opens last browsed page when started (I have set 'show a blank page' and 'about blank' in General settings)

    I have made the following settings in general tab of firefox in settings
    When firefox starts - Show a blank page
    Home page - About blank
    Inspite of the above settings, when I start firefox, it many times opens the page I was browsing before I had closed firefox previous time. Please help me with this.

    See [[Firefox makes unrequested connections]]

  • I am unable to print. Preview shows a blank page and it is blank when printed. I've tried all of the suggestions here. Any other ideas?

    When receiving an email that I wish to print, nothing prints. The Preview shows a blank page and it is, in fact, blank when printed.

    When receiving an email that I wish to print, nothing prints. The Preview shows a blank page and it is, in fact, blank when printed.

  • Site Collections shows a blank page and sometimes doesnt show anything

    We are having this issue, it happens sometimes and sometimes not.
    With the site collection, it shows sometimes that the page cannot be found and a subsite sometimes shows a blank page instead of the site. I saw this article that describes the issue and it is regarding the authentication method, what else can be?
    http://adicodes.com/fix-error-empty-pages-when-new-site-collection-is-created/

    Hi Javi,
    According to your description, my understanding is that your site collection sometimes got a blank page and sometimes didn't.
    Whether you have configured AAM (Alternate Access Mappings) for your web application. If yes, please check your process. You can refer to the link:
    http://www.c-sharpcorner.com/UploadFile/93cb27/configure-alternate-access-mappings-in-sharepoint-2013/
    In addition, please check the log to find whether there are some messages about this issue. The path of the log file is: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15.
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • In firefox 30 I am facing issue with my wordpress website. I get blank page.

    After updating to firefox 30 I am facing serious issue with my wordpress website. My Site http://www.anthony.co.in is working fine untill firefox 29.But now getting blank page. Tried Reset/Reinstall, and even tried other PC. Still the issue same. After downgrading to firefox, my site is back fine. Only issue is with firefox 30. Any help would be helpfull

    @Dieog Victor. Thanks for your solution it worked. I can't able to think this could have caused the issue.
    You saved my day bro. Thanks.

  • After installing or upgrading to Firefox 31, starting Firefox does not show homepage, customize shows a blank page and the option button does not work

    I am the Windows admin for a university department and install PCs with Firefox all the time. This problem does not happen with every PC I maintain, only a select few (different model laptops with Windows 8.1 and update 1.) Until today, it only happened with new user accounts (with admin rights) that I setup on the laptops for our staff. Today this happened with The Administrator account while setting up a new laptop. In all cases so far, I install Windows from a saved image that was created using sysprep.
    I have tried the many suggestions of resetting Firefox, deleting the users Firefox profile, deleting the users Windows profile, uninstalling/reinstalling Firefox, uninstalling/reinstalling Firefox and the latest Java, but nothing helps. After uninstalling, I run an app to delete temp files and caches and will even manually remove registry keys HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. Plus I reboot and make sure the install folder is deleted after uninstall.
    Results are the same: after installing Firefox 31, the initial setup window for migrating IE and/or Chrome pops up and after clicking the Finish button, Firefox starts, but does not show the initial new user page, only a blank page. Clicking on the Options button (3 bars) does nothing. Right-clicking in the proper area, the popup menu appears so I can choose to Customize, but that only opens another tab with about:customize in the URL and the page is blank. From the right-click popup menu, I can enable the Menu Bar and get to Options from that.
    My latest attempt has helped a little. I uninstalled Firefox 31, cleaned up, deleted user Firefox profile, rebooted and then installed Firefox 30. Inital startup runs, and tells me I'm not up to date, and the Options button works. But I still cannot customize.
    I then upgraded to Firefox 31, but then it's back to no startup page, no options button and no customize. I can downgrade to 30 and get all but customize working again.
    Only Addon is one for McAfee Scriptscan for Firefox 15.1.0, which just after installing is disabled.
    Any help would be appreciated. Thank you.

    Ok. I disabled hardware acceleration. The only extension is the McAfee Scriptscan for Firefox 15.1.0, which was already disabled. I then disabled all plugins (Acrobat, Google Update, Intel Identity Protection (2x), Java Deployment Toolkit, Java Platform, MS Office 2013, Quicktime, Shockwave, Silverlight), which were all up to date.
    Normal or safe mode still has same result. No startup, no option button and no customize.
    Thanks for your help. Got any other suggestions?

  • 3.6.9 shows only blank pages

    I updated from 3.6.3 to 3.6.9 and i can't manage to let firefox work again. It just show blank pages and "loading page.." text on the tab.
    I made several steps but everything failed:
    - I have reinstalled from scratch
    - I have started in "safe mode"
    - I have deleted my profile, plugins etc. and reinstalled
    -I have tried to install a copy on the desktop,
    - I have tried to install beta 4
    but nothing resulted, just white pages, no error of any kind
    (other browsers of course were working fine at the same time)
    but if I revert back to 3.6.3 using Time Machine, oplà, everything works again... I really do not know what It could be
    someone can help me to solve this puzzle?
    Thanks!

    I updated from 3.6.3 to 3.6.9 and i can't manage to let firefox work again. It just show blank pages and "loading page.." text on the tab.
    I made several steps but everything failed:
    - I have reinstalled from scratch
    - I have started in "safe mode"
    - I have deleted my profile, plugins etc. and reinstalled
    -I have tried to install a copy on the desktop,
    - I have tried to install beta 4
    but nothing resulted, just white pages, no error of any kind
    (other browsers of course were working fine at the same time)
    but if I revert back to 3.6.3 using Time Machine, oplà, everything works again... I really do not know what It could be
    someone can help me to solve this puzzle?
    Thanks!

  • Mavericks iTunes shows a blank page for the App Store

    iTunes Store displays correct content for the Music, Movies and other tabs, but the App Store shows up blank. This is without a sign-in.
    Thought sign-in might help, but could not get past the sign-in panel . The same panel is re-displayed without any indication of error (an incorrect password did get a message in red about wrong password).

    This fixed it.
    I had turned off cookies in my Safari browser five or six months ago. After installing Mavericks, I had the above problem seeing the App Store in iTunes.
    I found a hint on what was wrong when I tried to use another AppleID to get into iTunes. In that process, an error message said to check the cookies setting.
    So, I re-enabled cookies in Safari and my iTunes is OK now, without sign-in and with sign-in.

  • HELP! ADE doc showing some blank pages and blocking ADE software on my PC

    I bought a ADE doc and put it in my Nook. The file shows blank pages between page 16 and 116, all other pages seem to be displaying correctly but I'm missing half of my book. Furthermore, when I try to open the file in my PC, the ADE progamm gets stuck trying to open it and then stops working after a couple of minutes. I am currently unable to open any ADE doc in my PC and have a partial file on my Nook.
    I've tryied uninstalling ADE several times and installing different versions but nothing seem to work. Can anyone help me?

    You said you  "even formatted my iPod to try and at least get SOME sort of recognition,"
    An iPod can't be formatted although it can be restored.
    Just what did you do?
    What was the "SOME sort of recognition"?
    Have you tried another computer?

  • Hotmail site just shows a blank page. Although I went to options advanced network clear now.

    My hotmail.com is a blank page. I tried to go to option > advanced > network > clear now. But the problem is still there.
    == URL of affected sites ==
    http://hotmail.com

    I have a client with the same problem but on Win 7 Pro 64 bit. Some pages in Hotmail just show as a blank (absolutely nothing) with the green progress bar hanging forever. Seems to be linked to just clicking on a listed email in the inbox. Using a fully patched O/S and the latest Firefox release. Same page/process in IE8 and no problems.

Maybe you are looking for