Dreamweaver CC June 14 will not start up on a Mac OS 10.9.3.

I have the newest iMac 27 inch model. Downloaded Dreamweaver update and it will not start up, icon flashes but that is all that happens. Never shows up in dock. Earlier versions have worked and continue to. Have reviewed log file see nothing, fixed permissions, uninstalled and re installed. Still the same. Did start up on a different user on the same machine. Any suggestions on what might be causing the non-start?
Thanks,
Ted

Thanks for the suggestion. Dreamweaver never got far enough into the startup to even write pref files, so I had nothing to remove. Was able to get Dreamweaver to start up by coping the pref files from a "clean" user account that Dreamweaver started up in, to my normal user account. Now have to rebuild my server info files etc. as they did not transfer.
thanks for the response.
Ted

Similar Messages

Dreamweaver CC (2014)- will not start up

Jun 23, 2014
11:08 PM PDT
I too have the same problem. I installed Dreamweaver 2x and removed it 2x. Still No startup. Just bounces in dock for about 1/2 sec.
Mac Pro 4,1
10.7.5
16GB RAM
I have repaired permissions, checked the logs for errors- NONE.
What else is there to do. I really need this to work.
PS CS CC 2014, Audition, and Muse all work fine.
I cleaned the app and uninstalled.
Please add this to the locked discussion going on.
My Dreamweaver CC (and 2014) will not start/open up.

11:31 PM PDT
Hi,
New development this evening but I still need the conference.
I installed it on another drive in my Mac Pro whose system is 10.8.5- It
opened fine with the welcome screen.
Then I installed it on my main startup drive where all my applications are
and did not attempt to open it.
I then went to the 10.8.5 drive and moved all information regarding DW CC
2014 to the problem drive EXCEPT the actual application.
I pulled information out of /user:/Library/Adobe App. support, Library-
Adobe App. Support, and the /user/Library prefs folder.
Some of the information was merged with existing files and some were
replaced. Including all of the information from the Application folder
(again; except the actual application)
I then repaired user system preferences (just for the heck of it). I only
moved applicable information relating to Dreamweaver not other Adobe apps.
I then started up the Dreamweaver application and it started up fine. But I
didn¹t get the usual Welcome tutorial screen and when I want to open a file
in the resulting dialog box to navigate to a file it also shows all the
invisible files on my drive. Very odd. So yes it does work but there may
be other problems since this my be a symptom or just an isolated anomaly
which does not affect the use of the application.
I tried all my other Adobe apps. perpetual and subscription and they all
work fine.
When do you want to do the remote conference?
Thank You
You said:
Dreamweaver CC (2014)- will not start up
created by lnayal <https://forums.adobe.com/people/lnayal> in Dreamweaver
support forum - View the full discussion
<https://forums.adobe.com/message/6494437#6494437>
Hi fotogra, Will it be possible for you to have a online conference with us?
We will have a look on your machine itself and try to investigate issue there.
Thanks for your patience.
Please note that the Adobe Forums do not accept email attachments. If you want
to embed a screen image in your message please visit the thread in the forum
to embed the image at https://forums.adobe.com/message/6494437#6494437 Replies
to this message go to everyone subscribed to this thread, not directly to the
person who posted the message. To post a reply, either reply to this email or
visit the message page: To
unsubscribe from this thread, please visit the message page at
. In the Actions box on the
right, click the Stop Email Notifications link. Start a new discussion in
Dreamweaver support forum by email
<mailto:[email protected]m>
or at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=2240> For more information about maintaining your forum email
notifications please go to http://forums.adobe.com/thread/416458?tstart=0.
>

I have installed dreamweaver, but it will not start??

I have installed dreamweaver, but it does not start??

Vista & Windows 7 require you to run as Administator.
http://netsecurity.about.com/od/quicktips/qt/qt_run_as.htm
Hope this helps,
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Dreamweaver mx 2004 will not start on Mac running OSX 10.6.2

Right after installation I go to run Dreamweaver (or any of the mx 2004 suite), the item bounces, then dissepears and does not start up. I looked in the console and found the following item... "translate: MACH_RCV_PORT_CHANGED - INVALID POINTER, RCV BUFFER NOT SWAPPED".
Now, I have found hundreds of people on the internet having the same issue, and the standard replies given, (by the way, never work!). Re-installing does not work, clearing out the preferences does not work, re-installing the OS is not an option (I have a brand new laptop with OSX 10.6.2).
I did see that Adobe had received this error question, but they have removed it from their site. It seems that they do not want to address this issue for some reason. I would like to know how to fix this error. Let's put it this way, Anyone who buys a new Mac, then installs their MX Studio 2004, it will NOT work under any circumstances. I have seen hundreds of other people with the same problem, and never get it resolved. So, do I toss dreamweaver out for good or is there a fix that Adobe will allow anyone to talk about?

Re: "Alternatively, if you don't want to do this, the only other option I am aware of to solve this problem is to buy software like Fusion or Parallels and install Leopard (10.5) as your OS and run MX 2004 within a virtual environment."
Just so this is perfectly clear..... NO CAN DO
I have VMWare and Parallels on a Brand New MacBook Pro. It came with 10.5.11 and that is absolutely the OLDEST Mac OS I can install in a virtual environment. Believe me, I tried Tiger, Panther and Jaguar to no avail.
If the Mac in question came loaded with Snow Leopard, it has a "Snow Leopard or better" firmware write on the logic board and it will not allow an older OS to be installed.... even in a virtual environment, unless there's a secret that nobody I've spoken to in support for both VM clients knows.

Dreamweaver CS6 will not start

I've had this problem for several weeks and thought I had it fixed by resetting the Preferences (http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html), however, my DCS6 application will not start again, and it seems to happen when I'm out of my docking station, and working from home.
Initally, I uninstalled/reinstalled DCS6 twice, and each time it worked, and then stopped working when I got out of the dock. Then, as I said, I found the documentation to remove the established Preferences. It worked fine in the office, but will not load again working from home.
The DW logo comes up on the screen, but hangs there. It never loads plug-ins or any of the other animations I normally see on the logo screen during a normal launch. The only way to stop the logo is to open Task Manager, locate Dreamweaver(whatever).exe under the Processes Tab and End Task. Dreamweaver is not listed in the Applications Tab.
Fortunately, Dreamweaver CS5.5 wasn't automatically deleted when I installed the new software, and it works fine, so at least I can get my work done.
i need some help with this, please.
Thank you.
Frank

So I take it that you have also cleared the registry entries as suggested in the document linked in your first post.
So we now need to prove that your Windows Profile isn't the culprit to make DW un-startable. To prove this, create a new user account on your machine (temporary or otherwise). To do this follow these instructions:
To create a user account
To open User Accounts, click the Start button , click Control Panel, click User Accounts and Family Safety, and then click User Accounts.
Click Manage another account. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Click Create a new account.
Type the name you want to give the user account, click an account type, and then click Create Account.
Please post back if this worked or not. If it worked then you may want to use this account for your DW work otherwise we need to find some other solution. Make sure the account is Limited if you plan to use for everyday work because creating an Administrator account is not advisable.
Good luck this time.

Settings (and other Apps) Will Not Start (Metro)

This morning most Modern Apps will not start on my system, including the Settings app. It seems to be a DCOM failure and seems directly related to this old thread.
http://social.msdn.microsoft.com/Forums/en-US/7e6fe520-af09-4a38-b333-30ed5978f70c/control-panel-will-not-start-metro?forum=windowsdeveloperpreviewgeneral
This is a current Windows 8.1 installation, full up to date on patches, and the problem still occurs after rebooting. I checked for newly installed patches, etc. and the only thing recent was the Windows Defender definitions update.
It's an i7 with 32 GB of RAM, fast SSD's etc. I don't believe this is a hardware problem in any way.
Here's the details from the System event log:
Log Name:      System
Source:        Microsoft-Windows-DistributedCOM
Date:          19-Jun-2014 09:21:53
Event ID:      10001
Task Category: None
Level:         Error
Keywords:      Classic
User:          SARSYS9\Michael Sargent
Computer:      SarSys9
Description:
Unable to start a DCOM Server: microsoft.windows.immersivecontrolpanel as Unavailable/Unavailable. The error:
"15612"
Happened while starting this command:
"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" />
    <EventID Qualifiers="0">10001</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8080000000000000</Keywords>
    <TimeCreated SystemTime="2014-06-19T13:21:53.648625200Z" />
    <EventRecordID>546613</EventRecordID>
    <Correlation />
    <Execution ProcessID="972" ThreadID="4068" />
    <Channel>System</Channel>
    <Computer>SarSys9</Computer>
    <Security UserID="S-1-5-21-802678348-186571299-231467638-1001" />
</System>
<EventData>
    <Data Name="param1">"C:\WINDOWS\ImmersiveControlPanel\SystemSettings.exe" -ServerName:microsoft.windows.immersivecontrolpanel</Data>
    <Data Name="param2">15612</Data>
    <Data Name="param3">microsoft.windows.immersivecontrolpanel</Data>
    <Data Name="param4">Unavailable</Data>
    <Data Name="param5">Unavailable</Data>
</EventData>
</Event>
That matches almost exactly with the referenced thread. But that thread never seemed to give a set of steps to resolve the issue (other than doing a Refresh which would be a catastrophic waste of time, reinstalling my whole development environment).
I really would appreciate some help resolving this issue. If I'm in the wrong forum, please move or suggest a more appropriate place.
Thanks,
    Mike

Please post questions and problems about using Windows in the Windows forums on
http://answers.microsoft.com
The MSDN Windows Store apps forums are for developers to discuss writing their own Windows Store apps.
--Rob

PowerMac G5 will not start up.

Hello,
I have a PowerMac G5 2.5GHZ Dual Processor (June 2004) that will not boot past the grey apple screen.
It will not get to a second chime by holding Command-Option-P-R at startup.
If I start up using Command-Option-O-F and enter reset-nvram (return) and reset-all (return) it freezes.
I have pressed the PMU button once.
It will start up using the hardware diagnostic disk and I can run the extended test multiple times (everything passes). When I press shut down or restart on the diagnostic screen, it freezes.
It will not start up from the Leopard installer disk.
It will not start up from the Disk Warrior startup disk.
I did run Disk warrior on the hard drive via Target Disk Mode and another computer.
Everything is disconnected from the computer except monitor, keyboard and mouse.
I have swapped the RAM with another identical computer that runs fine.
Battery has been tested and is fine.
Does anybody have an idea of where to look?
thanks
Ken

I seem to have similar issues. 3 out of about 40 times have I been able to get a second chime out of my pram reset...then I hols and get about 3 more. Each time...OS starts up and works just fine...until I sleep/shut down the computer. My drive has 5 gigs left on it, i hear that may be the issue. How do we remove the graphics card and reset that????
oh and BTW...leaving the plastic door off and trying to reset PRAM worked 2 out of the 3 times for me. This is getting frustrating. Im gonna free up some drive space and see what happens. Let me know if/how the graphics card trick works. It's fairly ridiculous that so many of us have these same issues.
Alex

UI API server is unavailable, the installation process will not start!

Hello Experts!
SBO VERSION IS: 2007A SP01 PL05
We are trying to install a partner solution's ADDON and we recives Error message:
"UI API server is unavailable, the installation process will not start"
I have deleted the folder: SM_OBS_DLL from temp folder
Re: UI API server is unavailable
But it didnt helped...
Your help please...
BR,
Meital
Edited by: meitalmo on Jun 30, 2010 11:18 AM
Edited by: meitalmo on Jun 30, 2010 11:20 AM

Hi ,
You may check following thread:
[Re: Connection to UI API Error]
Thanks
Ashutosh T

DW CS4 Will Not Start

I'm using DW CS4 and have been for many months without any problems - Version 10.0/Build 4117. All of a sudden it will not start, When I click on its icon I see the big green DW block and then a Microsoft notice saying Dreamweaver CS4 has stopped working - a problem..... and the only choice I have is to close the program. I've restarted my computer and tried again, with no success. The program sits in my Program Files/Adobe folder on my C: drive.
I badly need the program for the work I'm doing. I've added no new software to my computer lately - at least none that I know of.
Any suggestions?
Joe

Hi Thanks for this. I tried what you said the problem I have Win Vista and have installed dreamweaver cs4 Trial. I have Dreamweaver MX as well and have given up trying to use this on my vista machine. I can run CS4 on XP without any issues. Clearly this is a Vista use, but I can be alone with this problem can I?
When I try to run it It will not get past the splash screen, then reports the following.
I have tried turning off UAC and runing as Admin. Here is the error trail
Description: A problem caused this program to stop interacting with Windows.
Problem signature: Problem Event Name: AppHangB1 Application Name: Dreamweaver.exe Application Version: 10.0.0.4117 Application Timestamp: 48c874b4 Hang Signature: b4b6 Hang Type: 0 OS Version: 6.0.6001.2.1.0.768.3 Locale ID: 5129 Additional Hang Signature 1: 3ff7ef531c8f561f7432659a0b9534bf Additional Hang Signature 2: d4fd Additional Hang Signature 3: 044608c4cccbc38d42ab3134e57441d2 Additional Hang Signature 4: b4b6 Additional Hang Signature 5: 3ff7ef531c8f561f7432659a0b9534bf Additional Hang Signature 6: d4fd Additional Hang Signature 7: 044608c4cccbc38d42ab3134e57441d2
REALLY hope someone can help
Martin

Photoshop Elements 12 will not start

When I start elements 12 I receive the error message "Photoshop elements cannot start or continue because of missing file(s) Please reinstall" I have reinstalled the program twice and still get the same error. I have been using the program for a month with no problem and evrything else on my computer is working just fine. Thanks for any suggestions
Richard

Hi Brian,
Thank you for the advice, I will keep that in mind.
If I succeed, I will let you know.
I am living in The Netherlands.
Ineke
Verstuurd vanaf mijn iPad
Op 25 jun. 2014 om 19:29 heeft "Little_Pale_Face" <[email protected]> het volgende geschreven:
I just bought Photoshop elements 12, installation was no problem, starting organizer is no problem, but editor will not start up. What do I do wrong ?
created by Little_Pale_Face in Photoshop Elements - View the full discussion
Hi,
I meant create a new user account on your laptop. There are some settings that are stored on a per user basis so creating a new user may clear a setting.
However, that may not help in your case - I have been trying to help someone else and got your two problems mixed up.
The only reason that I had the editor fail before was resolved by running the disk cleanup and check tools.
As you have returned the product, you could try installing the trial version. If you get it to work, then you may be able to buy a boxed version from Amazon or similar. I'm not sure where you are but the boxed version can often be on special offer from the big stores at a cheaper price.
Brian
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6496317#6496317
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Message server will not start on AIX 6

I have a standard ECC6 system running the 185 kernel and ORACLE 10.2.0.2 on AIX 6. which is giving me a problem. I also have 2 other systems apparently with the same configuration which operate perfectly.
The problem I have is that if I stop the system the message server will not start. If I wait until the following day the message server starts pefectly. I have not been able to test stopping the system and waiting an hour or so and then restarting in the same day, so I do not know if the overnight wait is relevant.
dev_ms contains the following:
[Thr 01] Fri Jun 19 23:58:54 2009
[Thr 01] WLM Tag 'HQS/MSG' successfully set for this process
[Thr 01] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   324 (IBM RS/6000 with AIX)
relno      7000
patchlevel 0
patchno    163
intno      20050900
make:      multithreaded, ASCII, 64 bit, optimized
pid        254088
[Thr 01] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 254088) [msxxserv_mt. 1835]
[Thr 01] SigISetDefaultAction : default handling for signal 20
[Thr 01] ***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cp
p 3227]
[Thr 01] *** ERROR => NiIBindSocket: SiBind failed for hdl 1 / sock 8
    (SI_EPORT_INUSE/67; I4; ST; 0.0.0.0:3950) [nixxi.cpp    3227]
[Thr 01] *** ERROR => MsSCommInit: NiBufListen(3950) (rc=NIESERV_USED) [msxxserv
_mt. 10186]
[Thr 01] *** ERROR => MsSInit: MsSCommInit (internal) [msxxserv_mt. 1886]
[Thr 01] *** ERROR => main: MsSInit [msxxserv_mt. 5951]
[Thr 01] ***LOG Q02=> MsSHalt, MSStop (Msg Server 254088) [msxxserv_mt. 5999]
Regards,
Paul Richardson
Certified Netweaver, Portal and Migration Consultant
Sandpiper I.T. Ltd

Hi,
Thr 01 ***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cp p 3227]
Looks like port 3227 is already used. You can check the ports by netstat -a -n from your command prompts. Also check your settings in /etc/services and /etc/hosts files.
Check your filewall rules/disable antivirus if any and give a go.
Hope this helps.
Manoj

Just loaded Yosemite on my Mac and Illustrator will not start-up?

Just loaded Yosemite on my Mac and Illustrator will not start-up?

Reinstall the software and also read this:
http://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html
Mylenium

System PI 7.11 will not start because of R3INLPGM error

Dear experts,
our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
On the source node the PI system starts without any problems. If we switch over to the target node,
the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
ran under QUSRWRK.
In the pool files from SAPSTART we found the following errors:
QPRINT:
R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
QPJOBLOG:
*NONE      Information                 XXXXXXX SAPINLPGM    XXXXXXX *STMT    SAPINLPGM   XXXXXXX *STMT
                                     From module . . . . . . . . :   O4TMKLIBIX
From procedure . . . . . . :   prtjoblA
Statement . . . . . . . . . :   15
To module . . . . . . . . . :   O4TMKLIBIX
To procedure . . . . . . . :   prtjoblA
Statement . . . . . . . . . :   15
Message . . . . :   SAPINLPGM: Error in ChangeGidToR3GROUP - check whether
                                     R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority
But the authority from all libs and objects are same as on the source machine.
Any idea?
Best regards,
Matthias

Hello Matthias,
Please log on as QSECOFR (or a user with SECOFR authority),
ADDLIBLE SAPXIP71
and run command
FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
Best regards,
B. Wolf

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

My ipad will not start. It is 1 year old...I have tried holding the two buttons and nothing..I have it connected to my desktop and it will make a ding noise but nothing comes up on the screen.

Frozen or unresponsive iPad
Resolve these most common issues:
    •    Display remains black or blank
    •    Touch screen not responding
    •    Application unexpectedly closes or freezes
http://www.apple.com/support/ipad/assistant/ipad/
iPad Frozen, not responding, how to fix
http://appletoolbox.com/2012/07/ipad-frozen-not-responding-how-to-fix/
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
Black or Blank Screen on iPad or iPhone
http://appletoolbox.com/2012/10/black-or-blank-screen-on-ipad-or-iphone/
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

HT5654 Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Just tried 3 times to update iTunes on my PC running Vista. There was an error. It stopped the installation. Now iTunes will not start at all. The error message tells me to reinstall which I tried but did not work. What should I do?

Hello, Jdragone.
Thanks for the question. Start with completely uninstalling iTunes and all of it's components in the order specified in the article below. Once this is done, download and install iTunes.
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
If you receive any errors when uninstalling any components of iTunes, try the steps in the article below for each component that gives you an error.
"The feature you are trying to use is on a network resource that is unavailable" alert appears when removing Apple software in Windows
http://support.apple.com/kb/TS3704
Cheers,
Jason H.

Dreamweaver CC June 14 will not start up on a Mac OS 10.9.3.

Similar Messages

Maybe you are looking for