Dreamweaver CC opening files very slow iMac with Fusion drive

I am working on a small website based off on Bootstrap 3. Now that I am almost done with the project opening files take a few seconds to open them (in code view). I have tried the various fixes like resolveremoteurltoipaddress=FALSE but still the files load very slow. On my Windows Machine it loads very fast and that machine is 4 years old. The iMac I am using at work is the latest version with decked out specs and only Dreamweaver CC and Edge Code have very slow opening of files. Creating new documents inside Dreamweaver CC is fast. Is there a way to make Dreamweaver open files faster? How to make it load faster, open documents faster, especially in code view. My initial thought is maybe its because I am linking to a few JS library like TypeKit and jQuery but I have not experience these problems on my Windows PC. Any help would be appreciated.

Similar Messages

HOW CLOSE CAN BEHRINGER TRUTH B2031A SPEAKERS BE TO A 2013 IMAC WITH FUSION DRIVE?

How close can you put studio speakers (specifically Behringer truth b2031a) to a 2013 imac? I know the speakers are sheilded but is it still safe right next to the computer? Will the fusion drive inside or a external be affected by the speakers? Anyone who has knowledge or experience in this topic your information would be greatly appreciated. Thanks!

This was a concern expressed in this thread: Worrying reply to Apples FAQ on new Fusion Drive
However, Apple has since amended the FAQ, clarifying their earlier Fusion confusion.
Therefore I believe the answer is yes, you can add an external USB HD. If Apple would only state that explicitly in this document, it would eliminate all doubt.

Re-installing Mountain Lion to iMac with Fusion Drive

Hi I have heard all the horror stories from people regarding installing the new Maverick. I was hoping to try it, but wanted to play it safe by first learning how to recover back the original state of my Mac OS.
I have a Mac OS X ver 10.8.5
Processor 3.4Ghz Core i7
Memory 16GB 1600Mhz DDR3
Please advise as to how to install a clean Maverick OS.
I will then re-install all the programs one by one.
But if none of my software work well, I will want to go back to my original OS.
I do not have a Moutain Lion CD so if I wanted to reinstall original OS how do I go about it?
I have also noticed that the cursor problem has never been quite solved. Still occassionaly dissappears.

I read that I cannot use the Recovery Disk Assistant v1.0 to create an external recoevery disk for a fusion drive is that true?
Can you please point out or explain a bit more on how this internet recovery system work? What do I need? Just an internet connection? Or do I have to have some cloudbased recovery system which need to be set up? Do I need my password or Apple ID?
Sorry for my ignorance.

Office mac keeps asking for license key with fusion drive

I'm posting this in case anyone else is having this trouble where Office for Mac 2011 keeps asking for the license key. I have a later 2013 iMac with Fusion drive and never have been able to use office on this computer without entering the key. In talking with Microsoft they removed office and all the files and reinstalled with no help. In speaking with Apple, they said there is a known issue with Microsoft Office and the Fusion drive and Microsoft is working on a patch. Evidently the fusion drive moves the files around and to Microsoft that looks like new hardware so it prompts for the key. Realy annoying! Microsoft

I'm a certified Apple consultant and I recently hit this issue at an installation. On seven iMacs with the Fusion drive, I deleted the "Thunderbolt Bridge" interface from the Network System Preference. We then rebooted the computers, entered the product key one more time, and so far, the problem has disappeared and survives subsequent rebootings.
Obviously, if you are frequently networking two Macs using Thunderbolt, this isn't a good long-term solution (though it is easily added back). However, it does appear to work. I have no sound theory as to why it works, except that Office might be interpreting the existence of that bridge as evidence that the software was copied onto a machine instead of properly installed. This is just a wild guess, though.
I have no idea if it will work for others, but hey, the forums are for throwing out these ideas and seeing if one of them sticks for most people. So...there it is.

Can't Install from CDs with fusion drive.

I have a new iMac with fusion drive. I tried to install Print Shop from CD and was told I don't have enough room. Drive is 75% empty, It must to looking at the flash drive. Any ideas what to do?

In addition to what the others have said, OS X sees a Fusion Drive as a single device called a Logical Volume. The SSD and HHD that make up the Fusion Drive are totally hidden from the application by CoreStorage. So the problem is not that the SSD is full. It must be somewhere else.
Allan

Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

Very slow internet after Mavericks update. Opening websites very slow. Console info here. 9/25/14 11:12:51.416 AM com.apple.launchd[1]: (com.apple.qtkitserver[22059]) Could not terminate job: 3: No such process 9/25/14 11:12:51.416 AM com.apple.launc

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Finder is really slow ( 15 sec.) after mavericks update on brand new iMac 27" WITH fusion drive...

When looking up files it's fine, but when trying to save or open anything through ANY program, i.e. Adobe CS6 programs, Microsoft Word, but also Apple software, finder is really slow (15 sec. or more of the same spinning beach ball) after the OSX Mavericks update on my brand new iMac 27" WITH fusion drive... This ***** really bad because it totally disturbs the smooth workflow I bought the iMac for in the first place...
Any suggestions?
Already tried 'clearing the plist file' through terminal; didn't work... Rebooting (obviously), didn't work.
Will there be a fix soon?
It's costing me way to much time waiting for the finder to show it's content when working.
Any official word from Apple on this?

I had a similar problem. Tried repairing disk permissions, tried cleaning up with onyx and applejack with no luck. Finally what did work was simply starting up in safe mode (hold shift key down after restart) and it sorted itself out
Hope this works for you

How to Cnvert a RAR file to an AVI video file on my iMac with Mac OSx 10.82?, how to Cnvert a RAR file to an AVI video file on my iMac with Mac OSx 10.82?

Good Morning,
I have been trying to find a simple sotware as a trial version to try and covert a RAR file which is suppose to be a video screener and convert it to a AVI video file on my iMac with out any luck!
Could someone please give me some advice on how to convert RAR to AVI. and the best software to try and purchase?
Thank you.
Nellie

Hi,
I did download this from the App Store and when I use The Unarchiver it takes a couple of minutes to convert and it comes out as a DVDRip and will not open. Then a window copens and suggest it may be found at the App Store and when I click OK it "Your Search has no Results."
I would appreaciate any other advice.
Thank you.
Nellie

I cannot open files - they come up with an error opening this file - access denied. Help!

All my adobe files are now the same - they will not open at all - access denied with no reason other than an error! Help!

Hi - Strangely enough the files opened the very next time I tried! It
must be my fickle computer! My Adobe is quite new so I do not think it is
outdated.
Thanks for the reply anyway - I will plough on.
Cheers -Patti
In a message dated 01/04/2015 09:57:13 GMT Daylight Time,
[email protected] writes:
You have been mentioned
by Anubha Goel
(https://forums.adobe.com/people/Anubha+Goel?et=notification.mention) in Re: I cannot open files - they come up with an error
opening this file - access denied. Help! in Adobe Community - _View Anubha
Goel's reference to you_
(https://forums.adobe.com/message/7394775?et=notification.mention#7394775)

Very slow connection with Mifi 4510L??

I'm hoping someone here can give some guidance. I am having very slow connection with the 4510L we just got. Via test on speedtest.net I'm seeing download speed of .17 MBPS at times it was so slow the test was not completing. I normally have 1 or 2 bars on the mifi unit and have seen up to 3 at times. I drove into town and see the same range (1 to 3 bars). I have yet to see the 4G light come on except for prior to activation (would light solid green at times) since activating I have only seen the violet light for 3G.
Verizon advertises full service both around our city (Richmond, VA) and at my more remote location in Hanover. I have been through the recommended resets and nothing seems to improve the connection speed. Could the unit itself be defective? Also, I've noticed when I go to a location website it thinks I am in Pennsylvania when I am in Virginia. Could the Mifi be trying to connect to a signal in that location for some reason (was refurbished device)
Thanks for any help you can offer,
Brian

I was having problems but upgrading to 2.28 seems to have helped me in addition to a few other changes I made based on this review of the 4510L
http://www.anandtech.com/show/4500/novatel-wireless-mifi-4510l-review-the-best-4g-lte-wifi-hotspot/4
1) "selecting WPA2 Personal/PSK (AES)"
2) "manually selecting a channel (instead of Auto) fixes almost all the instability problems"
(I'm not sure if it actually worked as the diagnostics always shows channel 0 no matter what I picked. I did try a couple before one - or the myriad of other things I tried - seemed to make a difference - at least for now - fingers crossed)
3) "allowing for one to select between each network mode manually, so you can force 4G LTE, EVDO, 1xRTT, or all of the above. This is incredibly useful if you’re right at the cutoff for 4G LTE SINR" (that's WWAN Preferred Mode LTE only for me)
4) I also changed my 802.11 Mode to just one mode that works on both computers at my house
5) I am also careful to turn it off when I am done with it and take it off the charger for the night as well.
It is my only internet service due to my semiremote location (no cable etc) and when I first got it as a replacement for my dependable 2200 I was about to pull all my hair out. I was "forced" into it because due to antenna issues on a local tower that supplies my 3G signal my 2200 wasn't even able to load my gmail account. Verizon very helpful on that - call us if its still an issue in a "few weeks"! However, when I inquired about the antenna's effect on a 4G signal, an intelligent tech was able to tell me that it was not the tower I would be getting a 4G signal off of - odd but I didn't question that possibility.
It runs very very warm but I suspect having it on the charger and using it almost all day is part of that. At first I was wondering if heat was part of the problem - going so far as to have it sitting on an ice pack to test that theory. Of course then I had to wonder if maybe I was freezing it -lol. I am careful to turn it off when I am done with it and take it off the charger for the night as well.
I've been on it most of the day and it seems to be behaving well - so fingers crossed

Do I not get the "open file after publishing" checkbox with the trial version?

I owned the Adobe Acrobat 8 Professional version on my pc, and recently bought a Mac. Do I not have the option to "Open file after publishing" checkbox with the trial version? Do I have to repurchase the whole program to get that?

uninstall.
download from prodesigntools.com.
if you follow all 7 steps you can directly download a trial here: New Adobe Lightroom 6 (CC) Direct Download Links – Free Trials | ProDesignTools
and activate with your serial number.
if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies.
the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com).
failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. Any ideas?

Can't back-up new iMac with fusion HD. The back-up proceeds to within 10% of the total storage needed and then the "of" number increases. I suspect there is a problem with backing up the fusion drive. We have a new 3 TB time Capsule. I tried excluding different parts of the software from the back-up but it didn't make any difference. I even tried exluding "invisible items" to no avail. Any ideas?

When you setup the wireless and ethernet in the computer.. ipv6 will be on automatic.. this is wrong for the latest TC firmware and airport utility. http://support.apple.com/kb/TS4597
Go to the wireless and ethernet setup in preferences and change ipv6 to link local.
Once you do the big backup by ethernet the wireless will function fine for incremental.. it is obviously not estimating the size correctly..
A full back-up on the iMac would be about 650 GB. The partial updates that I have been trying start out at 115MB and keep growing indefinitely. The original back-up never finished nor have any of the follow-up attempts.
The first estimate should be the full backup but it will keep growing as the backup advances.. I would also delete any inprogress files to make sure it is not messing up .. delete even a sparsebundle if there is one for the imac on the TC and start afresh once you have ethernet connection.
See A10 here.
Pondini may have some other clues there to give you an idea of why the backup is slow or not finishing.. there is a lot of issues with TM when it decides not to work.

I am planning to buy an iMac 21.5 inch with Fusion drive and 16 GB RAM while i visit USA for a conference. My country of origin is India. Once i am back to India, will my iMac be covered by the Apple's Protection Plan?

I am planning to buy an iMac 21.5 inch with Fusion drive and 16 GB RAM while i visit USA for a conference. My country of origin is India and the option of configuring to my need is not avaialble here in India. My concern is once i am back to India, will my iMac be covered by the Apple's Protection Plan if something goes wrong here in India?
I recently came across some posts regarding International warranty related issues for iPhone and iPad....hence this crossed my mind...
Waiting for response from the support group members...

Thanks Ralph
This essentially means that if my iMac develops some problem (both software and hardware) in my country (India), it will be completeley attended (even the whole system requires replacement) by the AASP in India...is that what you say?

How to add a SSD to 2010 iMac with 1tb drive

How to add a SSD to 2010 iMac with 1tb drive? I have a mid-2010 iMac with 1tb HD and would like to either replace the HD with SSD -or- add 256 or 400gb SSD to maybe the Optical Drive and use it as the boot drive. Is this possible with Model 11,2? i thought i\I'd read it was, but recently am reading my system is too old - OWC have SSD drives for newer models not Model 11,1 -or- 11,2

Any SATA SSD will work, whatever you are reading is incorrect.
You have 2 choices with this model-install the SSD in place of the HDD or the Superdrive.
If you are installing in place of Superdrive you will need some form of SSD Caddy-these can be found on the cheap at places like eBay, also OWC sell one called the DataDoubler.
Guide:https://www.ifixit.com/Guide/Installing+iMac+Intel+21.5-Inch+EMC+2389+Dual+Hard+ Drive/8643
If installing in place of old HDD you will notice that the propietary Temperature Sensor will not fit on the new drive, you will need to replace this with a sensor such as this or this
You will also need a 3.5inch to 2.5inch drive adaptor such as this
Guide: https://www.ifixit.com/Guide/iMac+Intel+21.5-Inch+EMC+2389+Hard+Drive+Replacemen t/6284
If you still have doubts contact OWC as mentioned above, I would start deciding whether your Superdive is needed or if you want to swap out the HDD.
Hope this points you in the right direction

What external dvd drive is compatible with IMAC with optical drive

what external drive is compatiblee with IMAC with optical driv

As far as my experience goes I have had all external dvd drives work throu USB, the USB stands for Universal Seriel Bus and that means the drives are already in the device, so you can probably just go to best buy or to new egg and order a cheap one.
If you have usb 3.0 I would go with that since its one of the faster ones and you will save money on using a thunder bolt device, and trust me a $17 dvd player works just as good as a $120 dvd player.

Dreamweaver CC opening files very slow iMac with Fusion drive

Similar Messages

Maybe you are looking for