DreamWeaver cc running slow and not responding on Win 7

Hi Guys,
As of late my DreamWeaver has started not responding (eventually recovers) and is very slow to do anything. It has run fine in the past. The file I am running works fine on other PCs running the same edition of DW.
Have tried reinstalling DW and changing the antivirus permissions. Kind of stuck with what else to do.
Thanks

Try clearing the program cache file...
http://forums.adobe.com/thread/494811
...and see if that helps at all.

Similar Messages

  • After Mavericks, applications tend to become slow, painfully slow. Particularly iMovie; all other applications, Mail, Browser (Chrome) and others too are either running slow or 'not responding'. Help, please

    After upgrading to Mavericks, from Mountai Lion, all applications are slowing down. iMovie particularly is painfully slow. When iM is running, any other application that is opened up also runs slow or does not respond altogether. It was fine before Mavericks, can somebody help, please.
    Thank you.

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches. 
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and  Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Snow Leopard running slow, freezing, not responding.

    I am running Snow Leopard on Mac 2.4 GHz Intel Core 2 Duo with 3 GB SDRAM.
    Over the last few days the machine has gradually become slower and slower, the spinning wheel frequently appears and programs are not responding and the system freezes.
    When I restart, on a couple of occasions a white screen with grey pixel blocks has flashed up during start up, other times it has frozen on the blue screen.
    I have tried running Disk Warrior, Disk Utility, ClamXav, Onyx and disconnected all hardware, then finally I have reinstalled Snow Leopard but still seem to be having the same problems.
    By the way, I am also running VMware Fusion, don't know if this is relevant.
    Any suggestion, please?
    Message was edited by: STEVO75

    I would try running the extended version of your Apple Hardware Test.
    It's not perfect but may flag something. 
    DALE

  • Adobe reader too slow and "not responding," why?

    I downloaded adobe reader XI (11.0.10) for my touchscreen laptop with Windows 8.1 but when reading PDFs it's scrolls too slow, gets stuck when highlighting or performing other commands, and then I normally get "not responding."
    It's really slowing down my productivity!
    Would appreciate your help please. Thanks

    Try disabling Protected Mode [Edit | Preferences | Security (Enhanced)].
    If that does not resolve the problem, please tell us your operating system.

  • Computer slow and not responding since installation of new iTunes update

    Good Morning,
    I downloaded the new iTunes update two days ago.  As soon as I did it my computer was freezing up and none of my programs would respond.  I uninstalled it as my computer was working fine.  I did the update again and the same thing happened.  So this time I uninstalled iTunes only, not Quick Time and my computer is fine.  Is there anyway I can get a link to download the previous version?  I can not do a system restore because my compute does not have one for some reason.  I have tried that.
    Also my computer's CPU usage runs normally at anywhere from 4% to 12%, both times after I did the update, it was running at 100% all the time.  I could not shut it off or close any programs.
    Does anybody have any ideas?
    Thank you for your time.

    Many thanks Matt - when I spoke to my son last night he did say the anti-virus programme might be the cause, so he told me how to re-install the old Thunderbird version which worked, and to tick the option which says 'allow me to choose whether to install new versions'. So far so good! Very grateful for your help - thanks.

  • Macbook pro has been running slow and not restarting

    A few days ago I had to shut down my macbook because it froze. When I tried to restart it, it would sit on the grey apple screen and then after a few minutes it would restart again, and again, never getting past that screen. I called apple support and they tried to help me do a few things, non of which would work. Then they said I needed to reinstall OS Leopard but I did not have the discs, so I am waiting on them to be shipped. However, the next day I turned my mac on, and it worked. Since then I have turned it off and it has not worked again, but after doing a pram reset it works. However, it is very slow, only the safari browser will work, I cannot empty the trash (among other things) and just now when I tried to download an article off the internet, it said my disc was full and I had to delete things in order to clear space. Does anyone know if this is a hard drive issue, so if just reinstalling OS Leopard or upgrading to Lion will help? Any ideas what I should do?

    Sounds like a failing hard drive. Take it to an Apple Store for testing.

  • Safari running slow and not loading all of the page

    A couple of days ago Safari, started to runn slow on some sites and won't fil the hole progress bar. for several minutes, leaving the website with bitts missing. Im also getting wre it won't load the pages at all. But when i try the site using firefox or Opera they work ok. When safari stop working its is as if safari is not requesting any data as i have a meter that checks my upload and download rates and it is not moving at all. But then next day safri will work ok on all sites and then stop with no worning.
    Pls help.

    Try this:
    Empty Safari's cache (from the Safari menu), then close Safari.
    Go to Home/Library/Safari and delete the following files:
    form values
    download.plist
    Then go to Home/Library/Preferences and delete
    com.apple.Safari.plist
    Repair permissions.
    Start up Safari again, and things should have improved.
    If not, MacFixit have published a very detailed (very!) article on speeding up a slow Safari, here:
    http://www.macfixit.com/article.php?story=20070416000657464

  • Firefox hangs and not responding

    I am having this problem since last week, firefox has become slow and not responding. I have reseted it to the original, changed a file to places.sqlite.old (as suggested in the homepage of support page), unchecked the hardware accelaration, disabled plugins, etc. I have tried almost everything i could find on the net. The problem is very apparent when scrolling down Facebook pages, switching tabs, lags when typing and playing videos. Please email me suggestions at [email protected] ''(email removed - c)''

    Hello,
    '''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
    ''(If you're not using it, switch to the Default theme.)''
    * On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
    * On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
    * On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
    * Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    [[Image:FirefoxSafeMode|width=520]]
    ''Once you get the pop-up, just select "'Start in Safe Mode"''
    [[Image:Safe Mode Fx 15 - Win]]
    '''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
    Thank you.

  • MacBook Pro is running slow and All applications getting not responding..

    MacBook Pro is running slow and All applications getting not responding after every 30 seconds. I have tested by hardware test  nothing wrong with hardware. I am worried Because I am totally stuck with my macbook pro Help me Please !!! I have tested by creating guest account and also new account as administrator. same thing happened. apps running. I opened activity monitor and watched carefully when any app stucked, In activity monitor there is in front of ap name following text appeared : (Not Responding) in red color. 129GB free memory, 4 GB RAM Core i3 MacBook Pro 13 inch.
    Instant help needed..
    Thanks in ADVANCE !!!

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
    If you're booting from an aftermarket SSD, see whether there's a firmware update for it.
    Otherwise, take the steps below when you notice the problem.
    Step 1
    Launch the Activity Monitor application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
    Select the CPU tab of the Activity Monitor window.
    Select All Processes from the menu in the toolbar, if not already selected.
    Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
    Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
    Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
    Step 2
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • I close firefox and try to open it again later, it WON'T and says, "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." Firefox isn't running .

    After I turn on my laptop and click on firefox it works fine and it opens THE FIRST TIME. So can you help? i DON'T WANT TO RESTaRT my computer everytime and sometimes have to clsoe firefox b/c I'm typing paper and computer goes slow.

    Sounds like a "hang at exit" problem. There are several possible causes for that error. See:
    * How to stop the running Firefox process
    ** In Task Manager, does firefox.exe show in the '''<u>Processes</u>''' tab?
    ** See: http://kb.mozillazine.org/Kill_application
    * What may cause Firefox to hang at exit
    ** http://support.mozilla.com/en-US/kb/Firefox+hangs (see "Hang at exit" section)
    ** http://kb.mozillazine.org/Firefox_hangs
    ** https://support.mozilla.com/en-US/kb/Firefox+is+already+running+but+is+not+responding
    * You may need to try Firefox Safe Mode
    ** You may need to use '''Safe Mode''' to locate the problem: http://support.mozilla.com/en-US/kb/Safe+Mode
    **Firefox Safe Mode is a diagnostic mode that disables Extensions and some other features of Firefox. If you are using a theme, switch to the DEFAULT theme: Tools > Add-ons > Themes '''<u>before</u>''' starting Safe Mode. When entering Safe Mode, do not check any items on the entry window, just click "Continue in Safe Mode". Test to see if the problem you are experiencing is corrected.
    ** If the problem does not occur in Safe-mode then disable all of your Extensions and Plug-ins and then try to find which is causing it by enabling '''<u>one at a time</u>''' until the problem reappears. '''<u>You MUST close and restart Firefox after EACH change</u>''' via File > Restart Firefox (on Mac: Firefox > Quit). You can use "Disable all add-ons" on the Safe mode start window.
    ** See the following for more information
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+extensions+and+themes
    *** http://support.mozilla.com/en-US/kb/Troubleshooting+plugins
    *** http://support.mozilla.com/en-US/kb/Basic+Troubleshooting

  • Sometimes when I close Firefox and try to open it in few moments it shows me message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, I haven't o

    Sometimes when I close Firefox and try to open it in few moments it shows me message "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." However, I haven't opened any additional Firefox related programs, and previous Firefox is closed. First I though it is because of my computer, but then I discovered that other people have the same problem as well
    == This happened ==
    A few times a week
    == some 2 month ago ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.0; SLCC1; .NET CLR 2.0.50727; Media Center PC 5.0; .NET CLR 3.5.30729; InfoPath.2; .NET CLR 3.0.30729)

    Hi Andis.
    First of all, this is completely normal behavior, although it's a bit irritating, I know. What happens is that when you close Firefox, despite the window disappearing right there and then, Firefox keeps running for a little bit until the whole closing procedure is completed. This can take a fraction of a second on fast computers, or can take a few seconds on slow computers or when Firefox is storing a large session (if you save your tabs). All you have to do is wait a bit until Firefox closes, and then open it again.
    To see if it's still running, you can press CTRL+SHIFT+ESC and then, under the Processes tab, you can see if firefox.exe is still there. If it's taking an unusual amount of time to close (which happens very rarely, and only if the browser freezes on exit), you can force the application to terminate from this application (task manager).
    Firefox 4.0 will reduce by 97% the time it takes firefox.exe to close, so this problem will be basically erased for Firefox's next version.
    Until then, I can recommend you this extension, which helps you restart your browser more easily and without bothering about closing times:
    https://addons.mozilla.org/en-US/firefox/addon/3559/
    Hopefully this will help.

  • Slow start up and not responding Firefox 3.6.13

    Slow start up and not responding when I open Firefox 3.6.13. As long as 1 minute. I tried in save mode and it doesn't seem to happen. I used McAfee before and now use Norton IS with Real Time Malwarebytes. Still the same speed opening up, so the virus software is not causing the problem I think. I disable a lot of the add-on and still the same problem. Any suggestions?
    Vista OS

    If other softwares runs fast and smooth it's obvious that it's a Firefox-problem.
    Probably because of a corrupt profile.
    I have done a "checklist" you could follow here: https://support.mozilla.com/en-US/questions/667207#answer-124643
    Regarding slow start up, it's a common and old problem.
    Not all FF-users experience it as a problem, but I used to belong to them who suffered.
    If your cold start up (the first start after a Windows boot) is really slow, but a warm start (the second time you restart Firefox) is much faster - then I think I can help you.
    Try my own simple solution here: https://support.mozilla.com/en-US/questions/762446#answer-119951
    I run on Win 7 64-bit and on Firefox 4.0 betas, but that doesn't matter as it works also on older Windows and Firefox versions.
    Regarding your anti-virus software. I have tried the most of them. The best tradeoff is in my opinion Eset Smart Security (NOD32).
    If you want to try it: http://www.eset.com/download/free-trial/international
    I hope this will help you :)

  • When I click to open firefox it says that "firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system" and I've tried to shut down and restart my computer but it keeps

    when i click to open firefox it says that "firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." and I've tried to shut down and restart my computer but it keeps showing the same message. I've even uninstalled Firefox and then reinstalled in the hopes that the problem would be solved but it this message is still popping up. What can I do to solve this problem?
    == This happened ==
    Just once or twice
    == I was on facebook trying to upload pictures yesterday. ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; InfoPath.1)

    Do you have a profile lock file in your profile folder? If so, delete it and see if TB runs properly:
    http://kb.mozillazine.org/Profile_in_use#Remove_the_profile_lock_file

  • Firefox is OPEN and working fine, but when I click a link in Thunderbird I get 'Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.'

    If I click a link on my desktop or in any other program (while Firefox is open and running), I get this message: "Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." There's about a billion links for this if you Google it, but they all say that Firefox wasn't shut down properly. (OK, maybe not ALL of them, but if the needle is in that haystack, I haven't yet found it.) That's not the issue in my case since I haven't shut FF down at all.
    == This happened ==
    Every time Firefox opened
    == IDK

    This began to happen to me when I tried to run two separate profiles simultaneously on the same installation of firefox with -no-remote

  • I deleted the profile and firefox4 and then downloaded firefox4 again. But when i click firefox it says Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process,or restart your system.HELP!

    somehow i couldn't get rid of one website called www.searchqu.com/405 set as my homepage... I tried all solutions given to change the homepage but whenever i restarted firefox that homepage used to come automatically.. So, I deleted the profile (even from recycle bin!!) and deleted the firefox and downloaded it again hoping to get my problems fixed (which didn't happen!) because i'm getting dialog box saying- Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

    You don't say which operating system you have installed?
    Assuming it's Windows, right click a blank part of the Windows Taskbar and go to Task Manager. Then click the ''Processes ''tab, find '''firefox.exe''' and then right click it and choose '''End Process'''.

Maybe you are looking for

  • How can i re-install my Acrobat X pro in my new computer

    how can I re-install my Acrobat X pro in my new computer?

  • Regarding RFC Sender Communication Channel

    Hi All,   I am working on RFC sender channel, need some important information. 1). Can i use single RFC Sender Channel in Multiple Sender Agreements. 2). Can i use Program ID in Multiple Sender RFC Channels. I am having one RFC to File interface and

  • How to make components appear and disappear dynamically.

    So I admit I am from the HTML world and have been able to dynamically control divs to make them visible and invisible, as needed. How do you do that in Flex/Flash? I have tried the "visible" attribute, but the component takes up the same space when i

  • Delta Management - Urgent

    Dear Gurus, We have done an enhancement to capture Charateristics of an Material, for Example (Quality of the Material Which Can be Prime, Second.....) For Ex: for Line Item 001 the Quality is Prime. Now if an User makes changes to the Quality Field

  • Rules in BPC

    Hello Experts, Do you know what the library *SYSLIB SHELL_Library.LGL contain & how the following statement will execute. *DIM DATASRC WHAT=TOTWITHADJ; WHERE=PRODALLOC; USING=TOTWITHADJ; TOTAL=<<< Please reply ASAP. Thanks & Regards, Suneel Patil