Dreamweaver CC Won't Connect to the Right Root Directory

Hi there.
I'm running DW CC on a Macbook Pro running OSX 10.7.5. I made an edit to a link in a page file and put it to the remote server but the live page was still showing the old link (even after refreshing).
After troubleshooting a number of possible causes I found that the hosting provider (Hostway) apparently recently moved the site files from the original "www" root directory to a new root directory called "web". So I'm putting files to "www" which is now a dead directory.
I deleted the old server configuration (because just editing the root directory didn't change anything) in DW ftp client and created the new one with the new root "web". But when I connect to the remote server it's still showing the "www" directory and there's no way to get to "web".
I no longer have any reference to "www" in my server settings but DW still insists on going there and won't let me connect to the correct "web" directory.
I deleted my personal config file and that didn't make any difference.
I uploaded the edited file to "web" successfully with Fetch and the live page is now updated.
Any ideas? I can't seem to use DW's ftp client.
Thanks!

Sure thing.
Here's the server setup in DW:
And here's a shot of the local and remote files in the DW ftp client (note the "www" directory):
And, for comparison's sake, here's what the remote files look like in Fetch (pointing to the "web" directory:
Thanks for your help!

Similar Messages

  • XBox 360 won't connect to the right AirPort

    My wireless network is set up as follows:
    Cable Modem in far left end of the house => AirPort Extreme Next to Cable Modem => AirPort Express in Center Bedroom => XBox in far right end of the house
    The Express is set to extend the network created by the Extreme and it works wonderfully for everything EXCEPT the 360. For some reason, the 360 will only connect to the Extreme on the opposite end of the house. It's got a signal of -1, noise of -88 and a rate of 1... it's horrible. I've tired to force it to connect to the Express using MAC filtering, but because it's an extended network the MAC filtering is only applied to the network as a whole, and not the individual base stations. Is there a way I can force the XBox to connect to the Express?
    I tried placing the Express in the same room as the 360 but it's connection to the Extreme fades in and out and it's not very effective.

    Don't know if it was an update to the XBox software or the fact that I moved some stuff around on the network, but it works fine now.

  • I installed the latest version of iTunes on my Windows XP.  I can launch it but it won't connect to the store because it says I don't have a network connection but I do because I'm on the internet right now!  Help!

    I installed the latest version of iTunes on my Windows XP.  I can launch it but it won't connect to the store because it says I don't have a network connection but I do because I'm on the internet right now!  Help!

    The requirement shoul be on the box the iphone came in.  they are also on the website
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.6.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.7 or later (free download from www.itunes.com/download)"

  • What to do when your Game Center won't connect with the game?

    My game center won't connect to the game I'm trying to play and what is happing is the game would come one. But when its loading it will stop right in the middle of it and won't do anything. I don't know if its the game or game center. I believe its the game center because it doesn't open the apps inside of it on the first page. What should i do?

    Hey GarretTAT!
    Here is an article that will help you troubleshoot this issue with Game Center:
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    http://support.apple.com/kb/ts3970
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • My iPod Touch 2nd generation won't connect to the Internet

    After restoring my iPod Touch 2nd gen to factory settings because that's what iTunes advised me to do after doing the iTunes update a week ago, my iPod won't connect to the internet anymore. I was able to connect to our wifi but it won't go to any website, to iTunes, etc. I'm 100% sure the problem isn't our wifi because I'm using it right now with my laptop so it's not the wireless problem. Before restoring my iPod to factory settings iti has always worked and I never had a problem connecting it. I tried restoring it again but it still didn't work. I already also reset our router but still no luck. I wish someone could help me asap!! Thank you.

    You can try:
    - reset:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Power off an then backon your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - The troubleshooting here:
    iPhone and iPod touch: Troubleshooting Wi-Fi networks and connections

  • My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    My 1st Generation time capsule won't connect to the internet thru a new motorola sb6121 - get continuously flashing yellow light. Using a router in between the modem and capsule yields good but slower connection to internet. Any thoughts?

    Thanks for your response
    Let me give the history - I started with an Apple Express being fed thru a D-Link  EBTR 2310 cable Router from an RCA DCM315 Modem (Pure). Comcast service all the way.
    Got the 1st generation TC in 2008 and merely replaced the Airport Express with the TC. Worked ok
    A year or two ago I did try removing the modem and feeding the TC directly from the modem. Resulted in the same condition I have now - Continuous flashing amber on the TC. So I put the router back in the chain.
    Some time later, at the recommendation of a Comcast rep, I replaced the router with (a Belkin F5D 5231) to see if speed and dropout problems would be improved. I thought it helped some at the time but now I am not so sure.
    Last week I decided to see if a new modem would help with download speeds. So I got another pure cable modem (Motorola SB 6121- high on the Comcast recommended list).
    Got up and running easily with Comcast help and with the modem connected directly to a computer.
    Next I put the TC in the link and again could not get past the TC continuing to flash amber. Although I did get connected to the internet with this configuration I lost connection two both of my printers - one connected by USB and the other wirelessly to the TC. Again everything works fine when I put the Belkin router back in the system.
    However with the router in there, the modem shows the downstream connection to be 10/100 ethernet speed. (Modem light changes color for indicating speeds.}
    I have gone thru all of the combinations of powering down/ up, but all stays the same.
    I can live with what I have but something still doesn’t seem right.
    Thanks again

  • I have bought the wireless keyboard for my iPad.  I was working for a day but now the power light won't stay on and as such won't connect to the iPad.  I have changed the batteries but still no difference.

    I have bought the wireless keyboard for my iPad.  I was working for a day but now the power light won't stay on and as such won't connect to the iPad.  I have changed the batteries but still no difference.

    Not knowing which wireless keyboard you bought, it is difficult to be specific.  but ...
    it is quite normal for the keyboard's power light not to stay on - it is a way of conserving battery power.
    Try this:
    turn you keyboard off
    on your iPad go to Settings > Bluetooth
    if your keyboard is listed under Devices, then touch the little blue i to its right and choose Forget this Device
    now reset your iPad:  hold both the Home and Power buttons down for about 10 seconds until the Apple logo appears, let go promptly when the Apple logo appears and wait another 30 seconds for your iPad to turn itself on
    After your iPad is back on again go back to Settings > Bluetooth
    now turn your keyboard back on and see if it appeard under Now Discoverable
         if it doesn't read your keyboard guide to figure out how to put it into Discovery mode
    touch the listing for your keyboard under Now Discoverable, it should now appear under Devices
    touch the listing for you keyboard under Devices, and choose to pair with it.

  • Ipod won't connect to the computer at all.

    My 3rd Generation iPod nano won't connect to the computer at all. Therefore it has no battery for me too be able to reset or try to do anything with it.
    I've only been advised to make sure that i have the most recent version of iTunes?
    Could anyone help please?
    Thanks, Hollie.

    Try uninstalling the drivers,
    Plug in your iPod
    Right click on My Computer and click on Manage
    that will bring you to the Computer Management
    On the left hand side click on device manager
    on the right side click on the plus sign next to Universal Serial Bus Controllers
    it will show a list, in that list locate iPod or USB mass storage device
    right click and select uninstall
    Unplug your iPod and plug it back in
    Windows should automatically start installing them again
    if nothing pops up then right click on Universal Serial Bus Controllers
    and choose scan for hardware changes
    If that doesn't work
    Go back into Computer Management
    Click on Disk Management on the right
    and on the left it should say your iPod
    Right click and go into change drive letter and paths
    click on the change button
    Change it to something like N or M
    Click ok, you will get a message saying "changing the drive letter may cause the program to no longer run are you sure you want to change this drive letter"
    click ok
    then restart your computer

  • My hotspot won't connect my computer to the internet since I upgraded my phone to ios7. The PC sees the hotspot but won't connect. The op sys on the PC is windows 7 ultimate. Can anyone help?

    My hotspot won't connect my PC to the internet since I upgraded the op sys on the 4s iphone. The PC sees that hotspot but won't connect. The op sys on the PC is windows 7 ultimate. Can anyone tell me what to do please?

    Glad to hear it is all straightened out. You are right about the upgrade cost. That is one reason why Adobe switched to monthly licensing—no more upgrade cost <g, r, & d>. Of course we do have nearly monthly product upgrades. It is almost like playing whack a mole.

  • My brand new iMac won't connect to the internet - the Air is fine?

    Hi All,
    Loved my Air so much I bought an Imac today to do some serious work - but it won't connect to the internet.  It won't load any external webpages, the wireless symbol in the menu bar is at full strength and in settings it says its connected to the modem.  Its also finally recognising local time.  It can also 'see' my Macbook Air in the 'Migration Assistant' but doesn't connect.  The Air can't find the Imac in the 'migration assistant' and just spins.  I've rebooted the modem, turned both on and off, checked  Safari settings eg extensions (none loaded - its new today).
    Essentially I've not been able to view a webpage with the new Imac at all - very frustrating and disappointing. (The Air was a breeze to set up).
    I'm not very technical so does anyone have any suggestions?  Or do I just return it?  TIA.

    You have 90 days of free AppleCare telephone support. Please give them a call right away,  you can find the number by clicking AppleCare Contact Info

  • My iPad won't connect to the Internet while I'm in Europe, how do I connect it ?

    Helpppppp !!!!??? My iPad won't connect to the Internet while I'm in Europe, how do I connect it ?

    jmkaplan wrote:
    What is the difference between roaming and Wi-fi.  I'm going to EU in a week.  Your answer implies that if I use the Wi fI in the apartment I'm staying at for my Mac or my Iphone, I won't have to pay extra.  Do I have that right.  My carrier is ATT on my phone. 
    That's right, wifi is free around the whole world (except if you have to pay to access a protected network). It doesn't matter whether you're with ATT or Verizon. Beaware to turn off Cellular and Data Roaming as it is very costly if you don't have an int'l plan.  I think the cheapest ATT int'l plan at this moment is $25 for 50MB.
    Also, you can text anywhere in the world for 50 cents with cellular and data roaming off.  At this rate, you're not going to be popping 50 text messages back and forth, but for a few, I find it to be very reasonable.  It's cheaper to text a fellow traveler than to call him/her at int'l phone rates.  The cheapest text plan is 50 messages for $10.  See ATT.com for other plans.
    Another option to consider is Skype. With a wifi signal, you can call anywhere in the world for about 2 cents a minute.  When I set my Skype account up, they required a $10 prepayment.  At 2 cents a minute, that's 500 minutes.  While I think I set my Skype account up from Europe, I think it might be easier to do it here.  Skype works great on both my iPad and my IP.

  • Mini Mac suddenly won't connect to the net.

    Hello,
    Didn't realise you guys existed until I was pointed in you direction so I'm hoping you might be able to help.
    I started this thread http://forums.seloc.org/viewthread.php?tid=71654 on another forum I use. It has all the details of my problem. If there is anything I should be doing it would be great If you could point me in the right direction.
    Thanks in advance
    Karl

    Sorry for that, I've cut and pasted the different parts that I wrote.....
    I've been running a mini mac for nearly a year now and all's been well up until last friday. I use Tiscali's cheapo broadband package and that has been problem free until the mac suddenly decided that it can't connect last Friday.
    It's set up so that it automatically tells you when the adsl modem is connected. You can then check the modem and it is running fine. If I then try and open an internet page it's saying that the internet isn't conected. If I open internet connect and click for it to connect then it just say that it is idle and won't do anything different. When you look at the connection log it says that a pipe is broken?? and that's why it won't connect.
    If I look at the system information then it says that ethernet (en1) is enabeld but the cable isn't connected. Tried everything I can think of but it hasn't helped. Contacted apple but they want £35 to try and talk me through the problem. Tried Tiscali but all there suggestions have made no difference.
    I'm now using a six year old PC that's taken the best part of a week to get me online, I'm guessing the connection is OK as it's working on this PC but why isn't it working on the mac? Any advice will be genuinely appreciated
    Tried unplugging/ re attaching all the cables but it made no difference. I'm using the same modem and cables at the moment with this dodgy old PC so I'm guessing there isn't anything wrong with them.
    I do the repair permissions thing so but hasn't seemed to help.
    It's a Mini Mac running OS 10.3.9 ( I think ) I use Tiscali via a phone filter and then into a sagem modem (whatever they give you). The modem is connected to the mac via a usb cable.
    I've tried a different cable, and the modem is working Ok with this PC. So It's not Tiscali's end.
    I've jut spent the last hour messing around with the mac but it's making no difference. The Mac knows that the USB modem is connected but it won't connect to the net. I just tried to use tiscali's DNS number but I can't seem to sort it, I even tried pinging that number but nothing is coming back. It was set up to use ethernet adaptor (en1) and then you just clicked on a little icon in the top bar and it would connect to the net.
    Is there any way to wipe all the settings and try to get it going from scratch. Would it work if I bought a router and plugged it straight into the mac without a modem? There is a firewire connection on the back.
    If I look back it says something about a broken pipe. On the network set up screen it says that the cable isn't connected to (en1), so I'm guessing that may be why it not getting in contact with the net?
    I've now had suggestions to ditch the modem and buy a router?? Is there anything I should looking for in particular?
    Thanks again.

  • Appletv recognizes my wireless network but won't connect to the internet. can't restore to factory settings

    appletv won't connect to the internet, but recognizes my wireless network. ip address starts with 169.. somethings not right. never had a problem with appletv and home sharing until the update that required a change in my apple id

    An IP address starting with 169 indicates you are not properly connected to your network. Try restarting your router and try to connect again. if the problem persists you may be suffering from interference.

  • IPod touch 5th generation won't connect to the tv after doing up grade

    iPod 5th generation won't connect to the tv after doing an software update. Get an error message (this accessory is Not Supported by iPod touch) please help me with this

    First, try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.
    If the Reset doesn't work, try a Restore.  Note that it's nowhere near as quick as a Reset.  It could take well over an hour!  Connect via cable to the computer that you use for sync.  From iTunes, select the iPad/iPod and then select the Summary tab.  Follow directions for Restore and be sure to say "yes" to the backup.  You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod.  Again, say "yes."
    At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod.  As before, say "yes."  Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time.  If that happens, only the apps that are part of the IOS will appear on your device.  Corrective action is simple -  choose manual "Sync" from the bottom right of iTunes.
    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • 10.4.11 Now Virtual PC won't connect to the Internet!

    Since updating to 10.4.11 my Virtual PC (v7.0.1 - XP SP1) won't connect to the internet. I've been right the way though the trouble shooting guide with no success.
    Can anyone help me?

    Any new Gadgets Q, I would suggest updating to v7.0.3. The newest rev.
    You can find it here: http://www.microsoft.com/mac/downloads.aspx
    Cheers,
    Glynn

Maybe you are looking for

  • Loader Component Trouble

    Hey guys... I'm back. I am still working on this site, and have worked through numerous challanges and gotten through, but I have now hit a roadblock that I cant seem to conquer... Here is the situation....I have a "main" file.... I am using the tech

  • Sharing managed media between editors - using FCX lib backups to share projects

    Okay, here is my problem... I started a huge FCX project, hours and hours of XDCAM footage imported and a number of projects created. I imported using managed media option and share with another editor, so we have two complete and separate FCX suites

  • Derivation Rule Tables

    My users have created some transparent tables using the derivation rules in the Grants Management module.  I need to read these tables in a Z program.  The issue is, when the rule is run in each client the table name is generated by the system and va

  • Has an IDML Object an z index? To identify exactly the Object position / arrangement on a layer?

    Hi, let me tell you about my problem. I'm programming a converter from IDML to a special internal XML format. For example I have one Layer with three objekts. - On the bottom of the layer I've got a rectangle.          (z-index: 3) - Above this recta

  • About bash bug update being available but not showing up in software updates???

    Apple has posted a Bash Bug update (as of 9/29/14) for various versions of OS X.  It can be downloaded on the downloads page.  But why doesn't it show up as an Apple update on the Software Updates page??? When I go there it says "there are no updates