Dreamweaver CC2014.1 won't launch. Everything else works fine.

When I launch Dreamweaver CC 2014.1 the icon jumps but nothing happens. I have all other CC software working fine. My DreamWeaver CS5 is working fine. I have installed JAVA 8, I do not get any pop up about Java SE 6.

Ask in the DW forum and provide exact system info. Sounds like some of the startup scripts are not working.
Mylenium

Similar Messages

ITunes, app store, iBooks store, etc won't load and I can't figure out why. I tried rebooting and it didn't help. Everything else works fine. Help please?

iTunes, app store , iBooks store, etc won't load and I don't know why. Everything else works fine, and I've rebooted it. The problem is still there and I know I have a good Internet connection. Help please?

Have you tried disconnecting and re-connecting to your network ?. And when you say rebooted do you mean a reset ? If not then try that : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
You could also try closing those apps completely. From the home screen (i.e. not with any of those apps 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the iTunes, App Store and iBooks apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.

Safari pages are darkened and unresponsive. Internet is fine. Syncing with MacBook did not solve problem. Everything else works fine.

Safari pages are darkened and unresponsive. Internet works fine. Syncing to MacBook didn't help. Everything else works fine, including a different browser and apps that use the internet. Safari responds to searches and bookmark changes, but pages are not clickable. Help, please.

Have you tried a reset ? Press and hold both the sleep and home buttons for about 10 seconds, after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. Also have you cleared the cache : Settings > Safari > Clear Cache (and Clear History). Also, if your equipment list is correct, you update to 4.3.3

Can I get help with podcasts? When I try to open the podcasts, itunes crashes, says "itunes has detected a problem and must close", or the spanish equivalent since my xp is in spanish. everything else works fine, it even downloads podcasts and syncs.

Can I get help with podcasts? When I try to open the podcasts tab, itunes crashes, says "itunes has detected a problem and must close", or the spanish equivalent since my xp is in spanish. everything else works fine, it even downloads podcasts and syncs.

The only other thing I can suggest is to use the Repair option for iTunes.
Download the iTunes programme (do not uninstall your current iTunes) and then "install" the new copy. At some stage you should see an option to "install" or "Repair". Take the Repair option.
Once you've done that, if you still have a problem, I don't know what else to suggest, except to search through the discussions to see if anyone else has had the problem and managed to fix it.

This an IPOD I bought used. Everything else works fine. It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine. Any ideas?

This an IPOD I bought used. Everything else works fine. It syncs to my computer and plays my music but will not connect to the USB interface in my car. My wife's IPOD, which seems to be identical, works fine. I should say it connects but then immediately disconnects. Any ideas?

Then my last suggestion is to Reset it, while connected to the BMW Audio.
Toggle the Hold switch, make sure you dont see the red mark when you do the next step
Reset the iPod -> Press Menu and Center button simultaneously for about 10 secs or till the Apple Logo comes ON
Then release the buttons
Select your preferred language.
Here is the Apple support Article on the 5Rs
http://www.apple.com/support/ipod/five_rs/classic/
Good Luck!

I just updated to windows 10 and I have no audio, everything else works fine

i have no Audio, sounds or volume afte the update/upgrade to Windows 10. This is NOT the case yesterday when I did not have Windows 10 updated/upgraded into my Sony Vaio Laptop. Everything else works fine, it's taking a usb logitech mouse among other things. My Audio jack will not function so earbuds will not do the trick. I have found a old PS3 usb headseat seems to work, following that logic a usb speaker set would do the same. If you have a HD Cable you can link your laptop to a HD TV and use the TV's speakers. What can I do to fix my audio problem?

Hi judedudemude!
Welcome to Sony Comnuntiy!
I am glad to hear that you were able to resolve the issue by following jshanholtz suggestion (Thank you by the way). I'll save this on my bookmark and will refer to this thread if there will be post with the same issue.
Thank you guys,
Vincent

My HP will not print a photo from the computer file. everything else works fine. The memory slot

My hp office jet pro L7680 suddenly will not print a photo from the computer. shows in the printer que. Memory slot light blinks. Everything else works fine. N.

Something to chek, open a document, press CMMAND P, this will bring up the print screen, you can click on the arrow to expand the options
Then click on the presets and make sure that the preset you want is selected.
From the preset drop menu you can select Plain paper best or fast draft, which should then be color.
Hope this helps

Microsoft Office X won't print, everything else does fine

At work, I have to use MS Office. I am on a Windows network printing through the server to an HP Laserjet 2100 PCL5e. All my apps will print to the printer correctly except MS Office. It states it is printing and the dialog box closes. All that comes out of the printer is blank paper, but with the correct number of pages for the document that was being printed.
Any thoughts or help?
Thanks,
Jamie

I just installed Snow Leopard and thought everything was just fine, until I went to print MS Office X documents (yes, I still use Office X -- never had a problem with it until now). I got the blank pages too. Fishing around online for info (via Mactopia and other sites), I came across some references to font issues in 10.6 -- specifically that 10.6 installs new versions of several common fonts, including Times New Roman. Apparently the 10.6 version conflicts with the older Microsoft version.
Solution number one: Just by way of experiment, I replaced all the Times New Roman in a sample document with plain old Times. The document printed with no problem (BTW, I'm not having -- knock on wood -- problems with with wireless printing and printing to my HP Laserjet 1300).
Solution number two: I searched out the versions of Times New Roman that were contained in various font folders. I trashed the old Microsoft version. On my machine, I had to trash it from two separate locations where it resided: my user/Library/Fonts folder, and also the Application/Office/Fonts folder. The new 10.6 version of the font is in the hard drive (main system)/Library/Fonts folder. I left this one in place. Documents that I opened now in Office X -- even those with Times New Roman, which I use a lot -- printed with no problem.
NOTE: Times New Roman is not the only font that has these conflicts. Arial, e.g., is also affected, and several others. But, as I said, Times New Roman is one that I have used extensively, in almost every MS Office document I've ever created.
Bottom line: Try checking the fonts used in your documents. If one of these "conflicted fonts" is used, then substitute another font, or trash the old versions of these fonts, and leave only the Snow Leopard version.

YVM302 error, everything else working fine

Hi there, my fairly new HUMAX YouView box started playing up last night, we had no Freeview tv channels for about an hour with error message YVM302 being displayed. I rebooted twice, and it suddenly sprung back into life again. Tonight, I have rebooted, retuned, all to no avail, we have no Freeview channels at all. Everything else is working fine, and the aerial cable works fine when plugged directly into the TV, so why is the YouView box telling me there is no signal from the aerial?
Any help gratefully received!
Chris

Hi Rod, the re-boot worked for me the previous night so thinking about it I'm not sure it was the update yesterday as the box started displaying the weak/no signal message the night before. I left it switched off at the mains overnight last night, started it up again just now and it still hasn't found any channels. Re-tuning speeds through and comes up with zero channels found.
Guess it will be a calll to BT this morning. At least the TV still works through the aerial, and we can still watch On Demand and BT Vision through the box, but really that isn't the point is it!
Glad your box is working fine again though.
Chris

Device: iPad 2. Problem: since iOS 7.0.2 upgrade I can't open iTunes Store. I've done hard reset to no avail. Everything else works fine! What's the safe fix?

Is anyone having trouble opening ITunes Store on IPad 2 (or other apple devices) since the latest upgrade? Mine worked for about five minutes after upgrade, and then it would not open up any longer giving me the message: "CANNOT CONNECT TO STORE"I, but I can connect to the Apps store. I synced my devices. I have latest soft wear updates on my PC and IPad. Everything worked fine before upgrade. I did a hard reset. My wifi connection was checked and rechecked. I had enough storage at the time of the upgrade. I'm not computer savvy, so please speak computer for dummies language should you be so kind to respond. Thank you in advance.

Hello LDinaz,
Thank you for the details of the issue you are experiencing with the iTunes Store on your iPad 2. For the issue you are experiencing, I recommend signing out and back into the iTunes Store on your iPad 2:
Changing your Apple ID account
Tap Settings > iTunes & App Stores, then tap the Apple ID signed in.
Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID.
The last step states to sign in with another account, but for the situation you described, I recommend just signing in with your same Apple ID.
You can find the full article here:
iOS: Changing the signed-in iTunes Store Apple ID account
http://support.apple.com/kb/HT1311
If the issue persists after signing out and back in, I recommend following the iOS steps in the section titled "Isolate the issue: (Mac OS X, Windows, iOS)" in the following article (you can skip any steps you have already taken):
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
Thank you for using Apple Support Communities.
Best,
Sheila M.

ITunes store has no pictures, but everything else works fine

Suddenly after almost 1 year of using iTunes with no problems I logged on and found that no pictures display in the online store. I am connected and everything works fine...in other words, I can select an artist or song or movie and the page will change accordingly. I can play samples and all text is visible...just no pictures or graphics of any kind. I am at the latest software revision. What's the deal?

In my case I also lost the scroll bars and the menus were out of alignment. Tried trashing plist with no success. Then tried Quicktime reinstall after trashing the quicktime plist. Problem solved! Obviously a Quicktime problem. Cheers

ITunes streaming problem, everything else works fine.

I'm having a curious issue that's proven problematic to troubleshoot. I'm hoping someone else has already run into this issue and can possibly provide some feedback.
Recently, and randomly, our AppleTV has refused to stream movies out of our iTunes Library. It'll primarily sit at the loading screen until it times out, and on rare occasion it'll start a movie and then proceed to hang. The curiosity of this is that iTunes and our movie library is the only service on AppleTV to experience this failure. Netflix and Hulu both stream perfectly at high resolution without any issue what so ever.
I'm located in Green Bay, WI, and haven't had any issues with my ISP and streaming (for the most part) I also checked my router for anything in particular, and couldn't find anything that would indicate a service blockage related to Apple.
God help me if my two young girls can't watch Frozen, curious if anyone has had a similar issue.

I have been having the same issue with my Apple TV Gen3 boxes. My Gen 2 devices work fine.
I did find out that if I restart (settings>general>restart) the Apple TV, that it works until I let the Apple TV go to sleep.
I average rebooting my Apple TV Gen3 devices at least once a day.

IPad calendar won't open march 2013 in month view; just this one specific issue, everything else works fine. I've reset to factory but it still happens.

Hmm.....
New iPad, not been fiddled with in any way. When I use calendar, everything is fine except when I try to view march 2013 in month view, whether by switching to "month" from a march day view, or by moving from another month already in month view.
The application just closes down. No issues with data loss. No issues with same calendar data on my mac or iPhone.
I've reset to factory setting and restored but it persists.
Any thoughts? Thanks, Andrew.

The workaround for this is to remove any all day events from April 1 or change from all day to something other than all day event.
The update to iOS 6.1 is supposed to have fixed the bug according to some of those that have posted today.

I know it's a little late but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play my music. It will play spotify and YouTube music but not my music. Everything else works fine but when I go to play a song it just skips to the next. Why

I know it's a tad late, but I recently updated my iPod touch 4th gen to iOS 6 and now it won't play any of my music. It will play Spotify and YouTube just fine, but it won't play my music. It will just skip to the next a d the next and the next after a second or two without any sound. Please help! Thank you.

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Ipad updated to 7.1 but after update takes extremely long time to bring up itunes, everything else works fine

I updated my ipad to 7.1 this weekend. I am using the same wireless network, etc.....nothing else has changed but it takes an extremely long time to load itunes on the ipad. Everything from the store itself and the items I have purchased take anything rom 3 to 5 minutes to load.
I have reset the ipad, reset the "network" from the router to the option on the ipad.
Any other suggestions?

Check App Store
1. Tap "Settings"
2. Tap "iTunes & App Stores"
3. Tap on your Apple ID
4.Tap "View Apple ID"
5. Enter your user name and password.
6. Tap "Country/Region."
7. Tap "Change Country/Region"
8. Select the country/region where you are located.
9. Tap "Done".
Note: If the change doesn't take effect, sign out of account and sign in again.

Dreamweaver CC2014.1 won't launch. Everything else works fine.

Similar Messages

Maybe you are looking for