Dreamweaver CS3 After Mac Software Update

Dreamweaver CS3 has an issue with CSS background display and
other display issues after installing latest Mac software updates.
Display in browser is unaffected.
The culprit seems to be the Quicktime Version 7.6 update.
Changes to the folder located at System \ Library \ Quicktime seem
to cause an issue with Adobe products.
Solution: Do not intall Quicktime 7.6 update OR after update
replace Quicktime folder with previous version of folder from
backups. Restart computer.

I'm having other similar issues, where the splash window that
launches when you first start the app just sits there for about 3-4
minutes before dreamweaver launches. See no effect with other adobe
apps. This started after a mac update and an adobe update of some
other programs. FYI... I'm using CS4

Similar Messages

Problems waking up and connecting to internet after MAC Software updates.

My Intel Macbook laptop use to connected to the internet automatically when I turned it on the laptop or woke it up. Now after the last MAC software upgrade this week (which included iTune, iPhoto, MAC 10.4.9 and an Airport upgrade) my PC is having problems connecting to the internet.
It attempts to connect but can't. I end up playing with the settings in Airport internet connections – e.g turning Airport on and off, going to NETWORK -Other and reentering the Network name and wireless security passphrase. Most of the time I have to go into System Preferences – Network and play with these settings e.g. Changing Locations, playing with the network status and eventually, magically it connects and stays connected until the next time I wake up my laptop.
The wireless Macbook laptop is connected to a DLINK Wireless Router (DI-624), using WPA-PSK security. I have tried rebooting both the laptop and the router a number of time and even redid the setting on both the router and laptop.
Is there something else I can check/do??? Can I undo any of the MAC Software updates (thinking about the Airport one)??? I would really like to get back to connecting to the internet automatically.
Thanks.
Macbook Mac OS X (10.4.9)

Yeah, the 169.254 addy means it isn't getting a DHCP reply, so it's not connected to anything at all.
Is that Interface dragged to the top of Network>Show?Network Port Configurations and checked ON?
The Interface that connects to the Internet, needs to be drug to the top of Network Port Configurations.
Yes those files get recreated on reboot, (unless critical pieces of the OS are missing for it's defaults), but you don't have to trash/delete them, you can just drag them to the desktop!
But after hearing the latest I might try...
/Users/nnnn/Library/Preferences... the whole Prefs folder there.
/Library/Preferences/SystemConfiguration... the whole SysConfig folder.
/Library/Preferences/com.apple.sharing.firewall.plist
/Library/Preferences/com.apple.AppleFileServer.plist
Reboot... of course you dont have to trash them, you can just move them to the desktop to drag back if it doesn't work.

ITunes no longer works after Mac software update

I have allowed my Mac to update its software today. Ever since it completed the update, iTunes won't run. It is the latest version (also downloaded today), but a message pops up stating that 'you cannot use iTunes with this version of Mac OS X'... What's up with that?

Dropping the bandwidth in iChat to 500 kbps and changing the QuickTime Streaming settings to no more than 1.5Mbps... seems to work. So far testing with my company this morning, my iChat video has not frozen up after about a 5 minute test.
The video quality is not as good as in the past, but at least it is working so far. Hopefully Apple will fix this soon, but THANK YOU for this temporary solution. Work is possible again.

After Mac software update can't output thru firewire

I did a software update (quicktime, dvd studio pro, pro app support) and now I can't view my FCP output on my ntsc monitor. I've tried it with my camcera and with a Canopus ADVC110. Under FCP's View>VideoPlayback Applefirewire has (missing) in front of it, and Audio Playback has DV grayed out.
Any help is greatly appreciated.
Frank

Are you now on 10.3.9 using FCP4.5?
N

HT1338 After a software update, how do I get my camera to work on my Mac Air?

After a software update, how do I get my camera to work on mu MacBook Air?

Launch the app that does what you want to do with the camera:
OS X Mavericks: Use your Mac computer’s built-in camera.
Message was edited by: EZ Jim
Mac OSX 10.9

Dreamweaver CS3 for Mac crash

I want to create a tree panel in my extension. I do a test with "<mm:treecontrol>" and "<mm:treenode>" tags on Dreamweaver CS3 for Mac.
There are only two nodes in the testing tree panel, Dreamweaver crash instantly when I try to drag the node, but it works well on Dreamweaver CS4 for Mac although the tags don't support drag.
Is it a Dreamweaver CS3 for Mac bug?
Does anyone have solution to resolve this issue?
Thanks
Simon

I've been a Mac convert for about 2 years now. Right now, I'm
running DW CS3 on an Intel iMac and it runs beautifully. On my
Powerbook G4 (1.33 GHz PPC G4 and 2 GB of ram) the performance is
slightly lacking. One thing to be wary of with adobe products -
they can be memory hogs. Photoshop is especially notorious for
this.
Also, the more you have installed on a Mac laptop, the slower
it will run. Mine used to take a few minutes to boot because of all
the programs I had installed, and nothing was starting up with the
machine. After a format and clean install it runs like new.
That is something for you to consider, if you have all the
necessary software to reinstall everything you want. I never turn
off any features in DW and I have only had a few buggy problems.
Nothing major though.

Macbook will not boot up after running Software Update (Couldn't fix it)

Hi there,
I also have been experiencing some problems after running Software Update (Security update + Java) a couple of days ago. Similarly to Jandaf (http://discussions.apple.com/thread.jspa?messageID=9000023) I have only the gray start up screen + Apple logo + gear wheel constantly rotating. Based on the information provided in this forum I have tried some procedures which didn't solved my problem so far. Below I describe I have tried:
1) I have booted using the installation DVD and run the disk utility. When performing the First Aid/Verify Disk I found some errors ('Invalid node structure'). But I couldn't fix the problem using disk repair (same problem 'Invalid node structure' 'Volume check failed'.
2) I also tried to boot in single user mode (command + s) to run fsck -fy. It didn't work. I got the following message (last 4 lines):
CSRHIDTTransitionDriver::probe: -s
CSRHIDTTransitionDriver::probe: booting in single user .. do not match
Extension "com.apple.driver.AppleUSBTCKeyboard" has no kernel dependency.
Extension "com.apple.driver.AppleUSBTCEventDriver" has no kernel dependency.
3) When trying to boot in safe mode. I got a grey screen with the following message:
'You need to restart your computer. Hold down the power button for several seconds or press the Restart button".
4) I also tried to 'Archieve & Instal'. Again no success. After reading the DVD the action is terminated because some errors (does not specify).
5) I also tried the 'German Medicine' (http://discussions.apple.com/message.jspa?messageID=8728797#8728797) (i.e. Connect the 'problematic MacBook' to my old G4 via firewire and reinstall the 2009-001 update). Again no success. The G4 cannot mount the MacBook hardrive.
I don't know what to do any more.
A) Can I resuscitate my old system? If yes how?
B) If not, can I at least save the data I have in my old HD?
C) Is it possible to format and reinstall the OS or is this this computer doomed?
Apologies for writing so many questions but I'm really freaking out!
Thank you.
B.

Hi BDAqua,
I did as you said and got a firewire backup drive (Seagate - FreeAgent Desk 500GB). I tried to make a carbon copy of HD but it seems that the copy had some problems. Below I report both the CCC and console logs:
1) "Cloning method: Backup everything
Delete items on target that aren't on the source: No
18:23:39 Enabling ownership on the target volume...
18:23:50 The target volume has ownership enabled.
18:23:50 The target volume has Access Control Lists enabled.
18:23:50 Authenticating...
18:23:50 Initiating synchronization engine...
18:23:51 Cloning...
18:31:20 rsync: readdir("/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj"): Input/output error (5)
19:04:41 rsync: readdir("/System/Library/Components/AudioCodecs.component/Contents/Resources/Fr ench.lproj"): Input/output error (5)
19:05:41 rsync: readdir("/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:06:01 rsync: readdir("/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj"): Input/output error (5)
19:07:05 rsync: readdir("/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSBC DCECMData.kext/Contents/Resources/French.lproj"): Input/output error (5)
19:10:13 rsync: readdir("/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Resou rces/French.lproj"): Input/output error (5)
19:50:10 rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2] (51)
19:50:11 rsync: Some errors were encountered during the backup., Error code: 51
19:50:14 Sync Engine warnings: (
"rsync: readdir(\"/Applications/Utilities/Audio MIDI Setup.app/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Components/AudioCodecs.component/Contents/Resources/F rench.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/IrDA.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/CoreServices/Menu Extras/User.menu/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/Extensions/IOUSBFamily.kext/Contents/PlugIns/AppleUSB CDCECMData.kext/Contents/Resources/French.lproj\"): Input/output error (5)",
"rsync: readdir(\"/System/Library/PrivateFrameworks/Assistant.framework/Versions/A/Reso urces/French.lproj\"): Input/output error (5)",
"rsync error: some files/attrs were not transferred (see previous errors) (code 23) at /Volumes/Home/Users/bombich/Development/Bombich_Software/rsync-3.0.5pre2/main.c (1047) [sender=3.0.5pre2]"
2) "Mac OS X Version 10.4.11 (Build 8S2167)
2009-03-01 10:30:14 +0100
2009-03-01 10:30:21.962 SystemUIServer[213] lang is:en
Mar 1 11:20:32 Bs-Home-Mac /usr/sbin/ocspd: starting
Mar 1 11:38:25 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 12:46:40 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 13:54:55 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 15:03:13 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 16:11:31 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 17:19:46 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 17:47:20.393 Skype[313] SkypeApplication::init called
2009-03-01 17:47:21.554 Skype[313] SKInitDebugLogging
2009-03-01 17:47:46.169 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
2009-03-01 17:47:47.208 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Starting the process...
2009-03-01 17:48:36.186 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:36.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.367 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:48:37.369 Skype[313] MacVideo getDimensions rc == NO, width 0, height 0
2009-03-01 17:59:16.450 Skype[313] SkypeSound::setAudioDeviceUID: cannot find audio device with UID (null), trying to use default system output device instead
Mar 1 17:59:19 Bs-Home-Mac crashdump[355]: Skype crashed
Mar 1 17:59:20 Bs-Home-Mac crashdump[355]: crash report written to: /Users/bernardolima/Library/Logs/CrashReporter/Skype.crash.log
Mar 1 18:23:50 Bs-Home-Mac authexec: executing /Applications/Carbon Copy Cloner.app/Contents/Resources/helper_tool
Mar 1 18:28:01 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Main starting
2009-03-01 18:41:03.154 Skype[393] SkypeApplication::init called
2009-03-01 18:41:12.433 Skype[393] SKInitDebugLogging
Mar 1 19:36:16 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 19:55:54 Bs-Home-Mac mdimportserver[480]: -[ABAddressBook sharedAddressBook] Can't ABACQUIREFILELOCK Framework/AddressBook/ABAddressBook.m:2746
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 19:57:12 Bs-Home-Mac mdimportserver[480]: * +[NSUnarchiver unarchiveObjectWithData:]: extra data discarded
Mar 1 20:44:34 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 21:52:51 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor
Mar 1 23:01:07 Bs-Home-Mac ntpd[191]: sendto(17.72.255.12): Bad file descriptor"
Due to my lack of knowledge I can't judge how bad this is. But I can tell you that every time I read the word bad in the log it scares the s*** out me.

After running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened??

I was running the newest version of Snow Leopard, and after running Software update, I can no longer run, open, sync or use iTunes in any way. PLEASE what happened?
I really regret that I said "OK" to Software Update message... after Software Update of these updates on 7-26-11:
Migration Assistant Update for Mac
Mac OSX 10.6.8 Supplemental Update
Safari
iTunes
Remote Desktop Client Update
Now I get a message:
iTunes cannot be opened because of a problem
Check with developer to make sure iTunes works with this version of Mac OSX. You may need to reinstall the application. Be sure to install any available updates for the application and Mac OSX.
Process:         iTunes [5092]
Path:            /Applications/iTunes.app/Contents/MacOS/iTunes
Identifier:      com.apple.iTunes
Version:         ??? (???)
Build Info:      iTunes-10315501~1
Code Type:       X86 (Native)
Parent Process: launchd [111]
Date/Time:       2011-07-26 12:08:18.568 -0500
OS Version:      Mac OS X 10.6.8 (10K540)
Report Version: 6
Interval Since Last Report:          504736 sec
Crashes Since Last Report:           20
Per-App Crashes Since Last Report:   13
Anonymous UUID:                      B8B5EE28-970A-4E79-949B-EA2DD6E6DAA2
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Crashed Thread: 0
Dyld Error Message:
Library not loaded: @loader_path/libgnsdk_musicid.1.8.2.dylib
Referenced from: /Applications/iTunes.app/Contents/MacOS/iTunes
Reason: image not found
Binary Images:
0x8fe00000 - 0x8fe4162b dyld 132.1 (???) <A4F6ADCC-6448-37B4-ED6C-ABB2CD06F448> /usr/lib/dyld
Model: Macmini3,1, BootROM MM31.00AD.B00, 2 processors, Intel Core 2 Duo, 2.26 GHz, 2 GB, SMC 1.35f1
Graphics: NVIDIA GeForce 9400, NVIDIA GeForce 9400, PCI, 256 MB
Memory Module: global_name
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x90), Broadcom BCM43xx 1.0 (5.10.131.42.4)
Bluetooth: Version 2.4.5f3, 2 service, 19 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
Serial ATA Device: Hitachi HTS543216L9SA02, 149.05 GB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: External HDD, 0x1058 (Western Digital Technologies, Inc.), 0x0704, 0x24100000 / 2
USB Device: Hub, 0x0424 (SMSC), 0x2507, 0x26400000 / 2
USB Device: iMic USB audio system, 0x077d, 0x07af, 0x26440000 / 4
USB Device: Hub, 0x0424 (SMSC), 0x2502, 0x26470000 / 3
USB Device: Deskjet D4300 series, 0x03f0 (Hewlett Packard), 0x1f04, 0x26471000 / 5
USB Device: GD-0608-U, 0x056a (WACOM Co., Ltd.), 0x0021, 0x04700000 / 4
USB Device: IR Receiver, 0x05ac (Apple Inc.), 0x8242, 0x04500000 / 3
USB Device: Hub in Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x1003, 0x04300000 / 2
USB Device: Apple Optical USB Mouse, 0x05ac (Apple Inc.), 0x0307, 0x04310000 / 6
USB Device: Apple Pro Keyboard, 0x05ac (Apple Inc.), 0x020b, 0x04330000 / 5
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0x06100000 / 2
USB Device: Bluetooth USB Host Controller, 0x05ac (Apple Inc.), 0x8216, 0x06110000 / 5
FireWire Device: unknown_device, Unknown
FireWire Device: d2 DVDRW FW, LaCie, Up to 400 Mb/sec

Same thing happened to me and I get the same error message. These are the programs that don't work
mail
keynote
pages
all Office 2011 programs
safari

Dreamweaver CS3 and Mac OS 10.4.11 Incompatability

I have been using Dreamweaver CS3 under OS 10.4.10 for a few
months without significant issues... but after upgrading to 10.4.11
there is a significant problem.
I am unable to access any of my remote servers to upload
files to the sites I have built.
I was able to reinstall Dreamweaver 8 and it works fine with
all the same setups
I've read a technote on a noted problem with Dreamweaver CS3
and Mac OS 10.5 - but it also appears to happen on 10.4.11
You can read the 10.5 technote here:
http://www.adobe.com/go/kb402780

I have not experienced this problem. Try removing the DW CS3
preferences file in your Library and then let DW build a new one.
BTW, what error you are getting when you try to FTP?

When i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version. What to do?

when i open itunes the warning itunes Library.itl appears with the following message. ..."it cannot be read because it was created by a newer version of itunes. after checking software updates we have the lastest version. What to do?

Perhaps check to see if you're accidentally running two different versions of iTunes. There's some information on troubleshooting that in the Opening iTunes section of the following document:
Troubleshooting iTunes installation on Mac OS X

CAN'T open any applications after mac os update 10.4.11

CAN'T open any applications after mac os update 10.4.11 help

General advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

Time capsule stopped working after installing software update, no lights and reset did nothing. What do I do?

I can't get my time capsule to turn on after a software update. Reset button does nothing and it is pluged in to a live outlet. Is my time capsule dead?

Welcome to Apple Discussions, Freepisces
I have all the latest updates on my Macs, and I have no problem at all.
If you applied the latest (7.4.1) QT update, your problem may be due to the fact that the System Requirements for QuickTime 7.4.1 for Tiger include Mac OS X 10.4.9 or later, and you show that you are using Mac OS X (10.4.3). You can check which QT version you have installed using the QuickTime Player > About QuickTime Player menu command.
If your QT version is an older one that is compatible with your Mac OS, and if you have not done so since you applied the QT update, repairing permissions may help you.
If the problem is somehow related to your iSight rather than to your QT software, Apple's How to Troubleshoot iSight may help you identify and fix your problem.
Unless you have a compelling reason for not doing so, you should consider updating to the latest version of Tiger (10.4.11). To find out what improvements you are missing by staying with 10.4.3, see some of the "About the Mac OS X 10.4.xx Update" documents for updates later than 10.4.3. A couple of examples are:
• About the Mac OS X 10.4.6 Update (combo) and
• About the Mac OS X 10.4.11 Update
If you are interested, other "About..." documents are linked in this search list.
Because System Requirements for the latest combo applicable to your MacBook, Mac OS X 10.4.11 Combo Update (Intel), are for Mac OS X 10.4.4 or later, you will need at least two steps to upgrade from your Mac OS X (10.4.3), so pay careful attention to the System Requirements of any updates you plan to apply.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.1) External iSight

IPhone not recognized after Mac security update

I have a Mac iBook G4 running OSX 10.4.11, and an iPhone 3G running OS 3.0. Up to now they have worked fine together. The phone was charged on the iBook this morning. This afternoon I ran software update on the Mac which installed the latest security update (2009-05, I think). After that, the phone is not recognized when plugged in the USB port. It no longer charges, nor is it recognized by iTunes.
I have checked the following to be sure that the security update is the culprit:
The iPhone with the same cable works fine on another Mac (running 10.5).
Other devices (thumb drive, printer) work fine in the same USB ports.
Finally, I restarted the iBook from the original installation CD for OSX 10.4. When running with the original version, the iPhone is recognized correctly.
So, I am reporting a problem with the security update, and I need to know how to back it off, or how to get it fixed.
Thanks for any help.
NOTE: Software update also installed iTunes 9.0.1 along with updates to Quicktime and Safari. However, none of these apps even have to be running to show that the phone will not charge.

The problem was solved by resetting the System Management Unit, thanks to a helpful phone call with an Apple Expert. On the iBook this required unplugging, removing the battery, and holding the power button in for 15 seconds.
Earlier I tried zapping the PRAM, as someone suggested, but the phone was not recognized. But it turns out it did show up in the System Profiler.
I have no idea why this happened in the first place, right after the software update.

TS1367 after a software update, my macbook pro was supposed to restart, since then, it doesn't restart & there is nothing i can do, any help please ?

Hello,
after a sofware update, my macbook pro was supposed to restart,
since then the start up process begins & after few seconds, the mac goes back to off without starting, what's wrong ?
thanks for any support,
Amine

Let me add a little bit of details,
after the software update, I was asked to restart my laptop,
while doing it, I got a message error :"some files couldn't be updated".
Since then, everytime I start my macbook pro, I have the grey apple & screen, with a kind of updating bar (grey as well) at the bottom,
when the bar reaches approximately 30 to 40%, it disappears & the laptop swiths off.
Ihave tried to start on a safe mode, it doesn't work either,
thanks

New Mac Software update causes blue screen

Hello, I need some help...
I Updated my Macbook Pro with the reqular Mac software update (includes quicktime, itunes and a couple others) I was given the option to "shut down" or "restart"...
I clicked "shut down".
My computer then proceeded not to turn off but simply turn to a blue screen...
After some time I turned off my machine and restarted it...
It took a little longer time to start up as it usually does after a software update...
But after going through the main white screen with the apple, then moving through to the next screen that has the loading bar. that loading bar window comes up for a split second and then disappears leaving a blue screen with the cursor and then does nothing more...
I am stuck with a blue screen and a curser...
I have already tried to start up in safemode...
Any help would be much appreciated

Very astute question, for Tiger on Intel you must use the exact install disk for that Model, Gray in color for one thing.
One thing to try other than a Safe Boot...
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Tough without the Tiger Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: 
The volume (nameofvolume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: *** FILE SYSTEM WAS MODIFIED ***   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214

Dreamweaver CS3 After Mac Software Update

Similar Messages

Maybe you are looking for