Dreamweaver CS3 fails when publishing to the web server using WebDAV

Dreamweaver CS3 fails when publishing to the web server using
WebDAV
using an earlier version (7.x/8.x) works fine.
Does anybody know if there is a solution for this.. This is
urgent..
Attempting to call the 1-800-833-6687 number fails with:
recording, music, rings as though someone will finally answer, but
gets a few dial tones and connection goes silent..
Thanks
J.

If all of your credentials are correct, Server Name/IP Address, Username, Password, Root Directory and it's still not connecting, I would try toggling the Passive FTP checkbox.
If you still can't connect in DW, try downloading a third party FTP program like Filezilla (free) and uploading there. If the third party app doesn't work either, there is likely a problem with your credentials and you would need to contact your hosting provider to straighten it out.

Similar Messages

Remove IRM permission programatically in the web server using super account

Is it possible to remove IRM permission programatically in the web server via super account

Hello Tolab,
I'd suggest asking SharePoint specific questions on the
SharePoint 2013 - Development and Programming forum instead.

Links changing size and not appearing normally when published to the web

I can figure out what is happening. No matter what I do I can't get the 'main page' button to appear as it does in iWeb when published. Help!
http://web.mac.com/andrew.santangelo/iWeb/Site/Booking.html

http://web.mac.com/andrew.santangelo/iWeb/Site%202/Private%20Lessons.html
http://web.mac.com/andrew.santangelo/iWeb/Site%202/Home.html
http://web.mac.com/andrew.santangelo/iWeb/Site%202/Booking.html
Here are the pages I'm having problems with

FLV File does not play when published to my web server

Hi. I have created a short video in VC3 and selected the FLV option to create a web page. When I uploaded the entire file content to my web server (windows 2003 server hosted at Network Solutions) the FLV file will not play. Now... if I do the same with a WMV tile, the video plays.
You can view the file at
http://www.airforcehomeseller.com/videos/va_education/VATutorials/index.htm
We have another video published in WMV format, although the video vs audio sync is out of wack at the moment, at
http://www.airforcehomeseller.com/videos/Energy%20Pricing%20101/index.htm
What am I doing wrong?
Any help would be greatly appreciated.
G-II

Hi again
You should probably double-check to ensure the standard.js file was also copied in when the HTML page was imported. It should be there but it never hurts to double check.
You might also perform a double-check to ensure things ended up in the correct folder (if you are organizing your project into folders). It could be that you moved the HTML page into a different folder and orphaned the JavaScript file.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Barcode error when executing it in Web Server, using BAR_CODE_39

Hello. following error is evidenced when executing the Barcode sample in web-server :
REP-108: File '/tmp/srw088834566' not found
The variable CLASSPATH y DISPLAY were changed.
I miss it the fact is that it works when I use BAR_CODE_128.
With 39 he encounters error REP-108.
Your suggestions
Karina Gaona V.

you mwy check this to trouble shoot front end
Troubleshoot the SAP NetWeaver 2004s BI Frontend Installation

Uploading a file to the web server

How can i upload a file to the web server using JSP.

hello sir,
Could U even tell me performance which one is better.
U have mentioned that Multipartrequest is Complex for Beginers,
but as far as performance is concerned which is better.
If Taglib is used is it error Free , as I do not know much abt taglib.
have just read a little abt it , have never created my own Custome Tag.
Could U just Guide me which is the best site where I could get know a little abt Taglib.An easy tutorial where I could read and start working on My application.
I have been given a Deadline. So Please help me man.
If U have the source Code for Uploading of a File Please Cut Paste it.
I have to finish the project on time .
Please
With Regards
Eklavya

VIDEO CUTS WHEN I PUBLISHED ON THE WEB

Hi all,
My name is Dario. I am working in one society for worker's formation.
I often use Captivate CS 6.
I have one problem, when I upload one video (video lesson) in Captivate and export a SCORM document, the video published in the web, cut last second.
I don't understand.
In my project a slide's duration is same at video's duration.
Could somebody help me?
Thanks

Hello Dario,
When you inserted the video, did you insert the event video or Multi Slide Synchronized Video, or is it a Video recording done in Captivate?
Do you face this issue when you publish your Project and see that locally?
Make sure that there is no effect applied onto that video like Fade out only in the Properties of that Video.
and also check from edit>Preferences> Project> start and end> fade out should not be checked.
Thanks.

I have svg's in my adobe animate animation then import to muse via (oam) but when its published to the web I lose all my sag's. Why and how to fix?

I have svg's in my adobe animate animation then import to muse via (oam) but when its published to the web I lose all my sag's. Why and how to fix?

I have svg's in my adobe animate animation then import to muse via (oam) but when its published to the web I lose all my sag's. Why and how to fix?

8.0.1 fails to connect to the web AT ALL when Internet Explorer can

8.0.1 has failed to connect to the web persistently since updating to this new version - Internet Explorer has no problem at present.

See http://kb.mozillazine.org/Firewalls

Color shift when going to the web?

I spent 2 hours yesterday trying to get a graphic I had done in illustrator to export for use on the web. No matter what I did, the color always shifted - it looked like a gamma or lightening thing. The thing is, I'm not a noob to graphics or the web, I've been doing this professionally for over 10 years. But either CS3, or my recent move to the Mac, or something... has completely thrown a wrench in the works. The final response from Tech Support was that it was inevitable, and that was it. ?? What? That makes no sense.
Here's the lowdown: Illustrator document is set to RGB color space. I tried the standard color profile, and also tried setting it to unmanaged. I then tried both export and 'save for web'. I always get this shift. Everything is lighter. soo.. I then tried taking it over to Photoshop and saving from there. Strangely, it looked right in Photoshop, and then still wouldn't export without lightening everything.
Ultimately, nothing worked. What am I missing?

Here are a couple of good links about sRGB and color spaces in general.
http://www.color.org/sRGB.xalter
http://www.drycreekphoto.com/Learn/color_spaces.htm
The first one gets pretty technical after a few paragraphs; don't worry about the more technical aspects, just read the first part.
To make a long story short, the reason we create in or convert to sRGB before posting to the Web is that it has become a standard reference space for work that is intended to be displayed on monitors. No individual monitor behaves exactly as sRGB describes, but historically it was developed to be a good average color space that most monitors can achieve, or come close to.
When you go to choose a hex color for a web page, if you watch what you are doing, you will notice that the same color has a different hex code for every different color space you might try out. For instance, I have a client that uses PMS 109C in their logo and all their packaging. The only way I can select a hex color for that PMS color in a reproducible manner is to choose that color in a defined working space.
For the Web, we have all already agreed that working space should be sRGB. If I chose that color in my monitor's display space used as a working space, it would be different on every different machine I have available to me. I work on 4 different monitors, so I personally could potentially choose four different translations of that color. Which would be correct? None of them, because each monitor is different, each has a different profile, and so each would give me a different translation of the same color. So I need to make that translation while working in a standard working space. I can either select my color directly in sRGB, or I can select it in Adobe RGB (or another standardized working space that actually contains that color), and convert the entire file to sRGB before publishing to the web. Either approach works.
Since sRGB has the 2.2 gamma, you want to set your display to 2.2 so you won't see a lightening of the image when you view it without a profile.
why strip the profile? As far as I am concerned, you often do not have to, but under some circumstances will want to.
For photographs, illustrations, and paintings I leave the profile on jpegs, because color managed browsers will display them more accurately with the profile embedded. This is particularly true of Safari, for reasons I have already stated.
For graphics that need to match hex colors, I leave the profile off, because safari does not color manage hex colors. so Safari will set-up a mismatch between tagged jpegs and hex colors. If you need to match a graphic to hex colors on the page, it's better to leave the profile off.
If you are working on a page or a site with very large numbers of images, you may want to leave the profile off to save on disk space and download time as well. For me that is usually not a big consideration... but for some sites it may be.

Can I publish my RoboHelp project directly to a web server using the Generate Primary Layout (WebHelp) function?

I am hoping to improve my method of publishing my company
Knowledge Base.
Currently, I generate the RoboHelp layout to a folder on my
local computer and then manually upload the project output files to
our sever via SmartFTP. My question is how do I publish directly to
the server? Is this possible?
On the first page of the Generate Primary Layout "wizard", I
have entered the path to a local folder on my computer. Three
screens later in the Servers box of the "wizard", I have entered a
server and path, and checked its box. When I generated the output,
I expected it to be published to both locations: the local folder
and the web server folder. But it only publishes to the local
folder, not the web server.
How do I get it publish to the server also?
Any help is much appreciated. Thanks!
~Beth

I had been using the HTTP setting, so switched to FTP and
filled in server info. This time the Publish function began
working! However, the process has since hit a snafu.
Certain files are causing errors and I'm getting a message
such as this one:
Publishing has been cancelled. Failed to create file: image
235.jpg
When I click OK to the first error message, I then get this
one:
Publishing has been cancelled. Failed to create file:
bsscftp.txt
After clicking OK to the 2nd error msg, the Publish fails and
I get this:
Warning: Failed to publish to "help". reason: Canceled by
user.
I have run through the Publish a couple times now and various
files cause the 1st error, but the 2nd file is always that same txt
file. I realize this snafu may be particular to my situation but
any ideas?

Communication problem the web server extension (WGATE) failed to receive a

Hi,
When a user tries to access his timesheet he get the below error:
<b>communication problem the web server extension (WGATE) failed to receive a response from the ITS web service</b>
Only ONE user is getting this error. If everyone get\s the same we can check on the ITS side, but if only ONE user is getting it.
Please help.
Regards,
PK

HI ALL,
Thanks for your time. The issue got resolved however without cheking the logs itself. The problem was with the scripfile. All other users and all other scripts were working, except one. And it got recified.
Regards,
P. Kumaravel.

Hit Counter button not appearing when I upload the web site.

I am using iWeb version 3.0.4 on OS 10.6.8, and on the Welcome page, I added the Hit Counter button. When I upload the web site, the Hit Counter button does not appear. Anyone have any solutions as to why it isn't appearing? Thanks...
Peggy Hinsman
Eugene School District 4j
Eugene, Oregon

Where are you hosting the site? The counter will not work on ftp servers, only on MobileMe. If you are hosting on MobileMe increase the footer height considerable and publish. If the counter then appears you can move it closer to the body/footer border and reduce the footer height.
If you're not on MobileMe consider a 3rd party counter like StatCounter. This tutorial describes how to add it to iWeb pages: #13 - Adding a StatCounter as an HTML Snippet
If you're on MobileMe you know that MMe will be discontinued on June 30 of next year. This may be of interest: #23 - Life After MobileMe
OT

HT1665 There is a bug in the spellchecking functionality when typing in the web view or while using Blogsy App. Why? Why my IPad crashes so often?

There is a bug in the spellchecking functionality when typing in the web view or while using Blogsy App. Why? Why my IPad crashes so often?

I have always found spell check to be "buggy" in every version of all of the iOS's that I have run on my original model iPad and my new iPad - especially when replying and typing posts in these forums. It works perfectly in every other application on my iPad but it has never worked perfectly in any web browser that I have used on my iPad - no matter what I have done to try to correct it. That is what MY experience has been with spell check on my iPads.
As for the crashes on your iPad try these basic troubleshooting steps.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Quit all apps and restart. Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.

HP Officejet 4630 Printer....how do change from the default setting when printing from the web?

HP Officejet 4630.....Windows 8, 64-bit
When printing from the web I am not able to change the print size.
1. Click File on Menu bar
2. Click Print open dialog box
3. Click Properties open printing shortcuts
Everything in Printing Shortcuts have a lock on it. Including Factory Default.
Any and all help with this problem will be appreciated.
Thank you in advance

I posted this to the wrong board. Can it be move to the right one?
thank you

Dreamweaver CS3 fails when publishing to the web server using WebDAV

Similar Messages

Maybe you are looking for