Dreamweaver CS3 frameset browse problem

When I click to preview in a browser for a .CFM file which
contains a frameset, Dreamweaver opens the browser with the
PHYSICAL path (eg. C:\CFusionMX7\wwwroot\mysite\frameset.cfm) and
so all that is displayed in the browser is markup. On the other
hand, if I click to preview in a browser for any other .CFM file,
Dreamweaver correctly opens the page using the web url (eg.
http://localhost:8501/mysite/test.cfm)
and so the page is parsed properly.
Also, If I click the "Live Data Viewer" button on the
frameset page, then I get a message:
The testing server did not execute any of the scripts in your
document. Possible explanations: Testing server is not running.
Testing server ignores .cfm files.
That message only occurs on the frameset page. Other .CFM
pages display correctly in the Live Data Viewer.

Broadcasting your serial number to the entire internet probably isn't going to help things in the activation department.
Can a moderator delete that?
See if anything here helps: Re: Dreamweaver CS3- Can't activate after reformat of hard drive
If not, go here: Contact Customer Care
Choose Adobe Dreamweaver
Choose How To's and Troubleshooting
Choose Troubleshoot
Click the Still Need Help button to get a phone number or direct chat with adobe support.

Similar Messages

Dreamweaver CS3 First Run problems

Installing Dreamweaver CS3 Saga.
I've had some trouble and despite looking for answers and
trying a few things I'm getting nowhere. I've included a timeline
of events below to help explain.
0) System: New Dell Opliplex 745 running XP Pro Sp2 and
networked to a domain. Educational License ordered for MOPS school.
Disk delivered.
1) Tried installing in regular user's account. When it
prompted for admin details, I entered them, but it didn't work.
Insufficient rights to install, fair enough.
2) Logged on as domain admin. Tried installing. Failed!
Insufficient rights. Hmmm.
3) Logged on to local computer as administrator. Installed.
Success! However, could not find the serial number so selected
"trial" option. All worked ok. Emailed supplier to find out why
serial was not included with disk.
4) Gave regular user full admin rights on computer to avoid
future hassles.
5) Obtained serial from supplier (it was on the invoice).
Entered serial number while logged on as user. Dreamweaver accepted
serial but then a blank dialog box (titled Adobe Dreamweaver CS3)
opened over the top of the rest of Dreamweaver and froze up access
to Dreamweaver. Can't close box, can't interact with box apart from
moving it around over the top of DW. It doesn't count as a separate
window in the task bar.
6) Ended Dreamweaver process, loaded it again. Blank dialog
box appeared yet again however Dreamweaver began some adobe
updating. ~140mb download. Around 20mb in, some files began
installing - so far so good. Then, adobe updater vanished and we're
back to frozen dialog box.
7) Restarted computer. Logged on as user again, ran
Dreamweaver again. Frozen blank dialog box again HOWEVER I did find
that if I was quick I could interact normally with Dreamweaver,
open files, etc for a few seconds until dialog box kicks in. Also
when ending the task instead of ending the process, the windows
message says "The system cannot end this program because it is
waiting for a response from you. To return to windows and check the
status of the program, click cancel. If you choose to end the
program immediately, you will lose any unsaved data. To end the
program, click End Now." Obviously this refers to the blank dialog
box but I can't interact with the box so I can't respond to DW.
8) Remembering previous troubles, logged off and logged on to
local machine as administrator. Ran Dreamweaver again. This time an
initial dialog box asking about file associations popped up. Then,
Adobe update began running, this time 120mb download. Once again,
around 20mb in, some files installed and then Dreamweaver frozen
dialog box once more is revealed. The rest of the updates are
nowhere to be seen, adobe updater does not seem to be running any
more.
9) Found an issue in forums with corrupt Bonjour installation
causing DNS trouble. Figured this might be affecting the updates,
uninstalled the service as outlined elsewhere on this forum. Did
not help.
10) Decided to attempt a repair install from the disk. It
seemed to work but then only the shared components seemed to
install. But underneath that in the installation window, it said
both Dreamweaver and the Shared Components failed to install. So
did it fail or did it not fail? Your guess is as good as mine.
11) Ran Dreamweaver again. This time, a green "scrolling
credits" style window appeared, with "Click here to continue". Upon
clicking, the credits window disappeared and all looked well. I
alt-tabbed to something else but when I went back into Dreamweaver
the blank dialog window was back again.
I've searched the net, and scanned these forums but I am
unable to find a similar issue or any clue as to how to proceed
next.
I am going to try to uninstall Dreamweaver and reinstall it
fully, while logged on as local admin, probably I will use the CS3
clean script that I found on the forums to make sure its all gone;
and then I will enter the serial at the same time as installation
to avoid ever triggering the trial installation conditions. In the
meantime if anyone has any suggestions feel free to chip in with
ideas.
PS Further information which I just remembered: Internet
access is restricted by a proxy. Adobe updater worked fine after
giving it username and password to log on to the proxy. Perhaps
this frozen screen is trying to access the internet?

Further information - when I tried to uninstall I was advised
by the uninstaller that I should deactivate CS3. But I couldn't
find how to do that in the few seconds before everything freezes.
I had an inspiration to pull the network plug out and sure
enough, the frozen window became a window which reads:
Dreamweaver is unable to connect to the internet to register
your product. I selected "Register Never" so hopefully this will
fix my problem!

Dreamweaver CS3 Paste HTML Problem

Hi, I'm a fairly basic user of Dreamweaver CS3. I used to be
able to paste HTML into webpages with no problem. I have recently
upgraded to CS3 and that menu command (Paste HTML) seems to have
gone. Can anybody help?
Thanks, your help would be appreciated!

dsbrett wrote:
> Hi, I'm a fairly basic user of Dreamweaver CS3. I used
to be able to paste HTML
> into webpages with no problem. I have recently upgraded
to CS3 and that menu
> command (Paste HTML) seems to have gone.
If you want to paste the actual HTML code into a page, just
switch to
Code view, and paste.
Copy, cut, and paste in Dreamweaver are context-specific. If
you copy a
section of a page in Design view, and paste it in Design
view,
Dreamweaver automatically copies and pastes the underlying
HTML. If you
copy in Code view, and paste into Design view, Dreamweaver
assumes that
you want to display the code (as you might want to do in an
online
tutorial), so it converts all the angle tags into HTML
entities and
displays the tags and attributes in the page.
The simple rule is copy and paste from Code view to Code
view, or from
Design view to Design view.
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Dreamweaver CS3 Design View Problem

I am trying to edit a Dreamweaver site using Dreamweaver CS3 on a Windows XP workstation at work. The site structure was developed by an outside vendor and has been designed using CSS for positioning -- no tables. It is my responsibility to finish the site using template pages provided. When viewing the site in several browsers -- both Mac and PC, everything is fine. When I open the site in Dreamweaver CS3 Windows, all of the positioning is off -- the menus that should be flush left of the text colum, instead, appear at the top of the text column. This issue is repeated throughout the site. Since I am using existing pages as templates for new ones, I'm forced to make edits in code view, upload and then view in my browser. My outside vendor, so far, does not have an answer to this.
This weekend at home, I've installed an old Dreamweaver 8 trial version on my Macintosh. I downloaded the site and everything looks fine in Design View. Any ideas? Is this a settings issue on my Windows version of Dreamweaver? I do have the Style Rendering setting set to Screen Media type.

Hi,
I found this thread after searching and searching for an answer as to why my Design View in DW CS3 started disappearing (even in split view). It will show a partial view, but never the entire view all at once, even after restarting my PC. I have been using CS3 for a few years now and it just started having this issue. When this issue started, nothing had changed on my computer. There has to be a fix for this. Why did it work fine all these years and now, no design view????

Dreamweaver CS3 Flash Slideshow problems

Hello,
First off, my name is Mike and I would really appreciate anything that you can do to help me.
I'm attempting to use Dreamweaver CS3's Flash Slideshow on a site that I'm building for a friend and I'm having troubles. I have two major issues:
1. I've uploaded my page to a test folder located on my own site.
http://www.mikebailey1979.com/NoahTest/Main.html
As you can see when you go to that page the Flash Slideshow is not appearing. I've attempted to figure this issue out as much as I can, but I'm not getting anywhere.
Using Dreamweaver to test I've deleted the AC script and it appears exactly like how it does now that it's live, so I believe that the problem lies in the Slideshow being able to find the script. What I don't understand is that the AC_RunActiveContent.js is in a folder titled '..Scripts' (which is located in the same 'NoahTest' folder as the 'Main.html')and there should be no problem with it sourcing the Script.
I'm perplexed as to why it's not reading the .js file.
2. When I preview the site in my Dreamweaver Preview it works fine, except for the fact that it looks like it's padding the size of the pictures.
I have all of the dimensions specific to the size of the slice in my site. The slideshow should be 924x668 to match the slice exactly, so that's what I told it to be in width and height. I've turned all borders to 0, frame thickness to 0, and I've even tried to add a command to change cell padding to 0, all with no effect. I've made a still screen capture for you to see my problem.
http://www.mikebailey1979.com/NoahTest/WhiteBorderProblem.jpg
I've left the Background White so you can see how it's not sizing the Slideshow correctly. So the White Border isn't really a border, but a sizing/spacing issue. I don't know what could be causing this.
If you could help me with one or both of these issues I would be so grateful. Thanks for your time.
Respectfully,
Mike

So, bemdesign, you're not seeing the white padding-like effect that I snapped a screen shot of? See here:
http://www.mikebailey1979.com/NoahTest/WhiteBorderProblem.jpg
I've tested the page 'Main.html' that I have live right now using Firefox, IE8, and Safari, and it's still doing this padding issue for me (if that's even what it's supposed to be called).
After a little research I found a post on another site where tons of people are having the same problem as me:
http://brianchau.wordpress.com/2007/07/17/where-is-the-flash-element-in-dreamweaver/
The very last post someone mentions that they fixed the issue that I'm experiencing by adding div tags specifying width and height. I've tried implementing this, but since I'm somewhat novice with coding still I'm not sure if I'm doing it correctly. Adding the div tags in various places seems to have either no effect or it changes the w & h values of the entire page, both of which not being my intention.
Can anyone here who is more advanced at coding than me who can tell me the proper way to implement the div tags in my situation?
This is the code for my page:
<code>
<html>
<head>
<title>Main</title>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1">
<style type="text/css">

</style>
<script src="../NoahTest/Scripts/AC_RunActiveContent.js" type="text/javascript"></script>
</head>
<body leftmargin="0" topmargin="0" marginwidth="0" marginheight="0">

<table id="Table_01" width="1024" height="768" border="0" cellpadding="0" cellspacing="0">
     <tr>
          <td colspan="4">
               <img src="images/Main_01.gif" alt="" width="1024" height="50" border="0"></td>
</tr>
     <tr>
          <td rowspan="2">
               <img src="images/Main_02.gif" alt="" width="50" height="718" border="0"></td>
<td colspan="2"><script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','width','924','height','668','src','Assets/Main_Flash','quality','high','flashvars','flashlet={imageLinkTarget:\'_blank\',captionFont:\'Verdana\',titleFont:\'Verdana\',showControls:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSize:10,transitionsType:\'Fade\',titleColor:#333333,slideAutoPlay:true,imageURLs:[\'Assets/Main_Flash_01.jpg\',\'Assets/Main_Flash_02.jpg\',\'Assets/Main_Flash_03.jpg\',\'Assets/Main_Flash_04.jpg\',\'Assets/Main_Flash_05.jpg\',\'Assets/Main_Flash_06.jpg\',\'Assets/Main_Flash_07.jpg\',\'Assets/Main_Flash_08.jpg\',\'Assets/Main_Flash_09.jpg\',\'Assets/Main_Flash_10.jpg\',\'Assets/Main_Flash_11.jpg\',\'Assets/Main_Flash_12.jpg\',\'Assets/Main_Flash_13.jpg\'],slideLoop:true,frameThickness:2,frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}','pluginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','flash_component','ImageViewer.swc','movie','Assets/Main_Flash' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="924" height="668">
    <param name="flash_component" value="ImageViewer.swc">
    <param name="movie" value="Assets/Main_Flash.swf">
    <param name="quality" value="high">
    <param name="FlashVars" value="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',showControls:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:true,imageURLs:['Assets/Main_Flash_01.jpg','Assets/Main_Flash_02.jpg','Assets/Main_Flash_03.jpg','Assets/Main_Flash_04.jpg','Assets/Main_Flash_05.jpg','Assets/Main_Flash_06.jpg','Assets/Main_Flash_07.jpg','Assets/Main_Flash_08.jpg','Assets/Main_Flash_09.jpg','Assets/Main_Flash_10.jpg','Assets/Main_Flash_11.jpg','Assets/Main_Flash_12.jpg','Assets/Main_Flash_13.jpg'],slideLoop:true,frameThickness:2,frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}">
    <embed src="Assets/Main_Flash.swf" quality="high" flashvars="flashlet={imageLinkTarget:'_blank',captionFont:'Verdana',titleFont:'Verdana',showControls:false,frameShow:false,slideDelay:5,captionSize:10,captionColor:#333333,titleSize:10,transitionsType:'Fade',titleColor:#333333,slideAutoPlay:true,imageURLs:['Assets/Main_Flash_01.jpg','Assets/Main_Flash_02.jpg','Assets/Main_Flash_03.jpg','Assets/Main_Flash_04.jpg','Assets/Main_Flash_05.jpg','Assets/Main_Flash_06.jpg','Assets/Main_Flash_07.jpg','Assets/Main_Flash_08.jpg','Assets/Main_Flash_09.jpg','Assets/Main_Flash_10.jpg','Assets/Main_Flash_11.jpg','Assets/Main_Flash_12.jpg','Assets/Main_Flash_13.jpg'],slideLoop:true,frameThickness:2,frameColor:#333333,bgColor:#FFFFFF,imageCaptions:[]}" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="924" height="668"> </embed>
</object>
</noscript></td>
<td rowspan="2">
               <img src="images/Main_04.gif" alt="" width="50" height="718" border="0"></td>
</tr>
     <tr>
          <td>
               <img src="images/Main_05.gif" alt="" width="689" height="50" border="0"></td>
<td>
               <img src="images/Main_06.gif" alt="" width="235" height="50" border="0"></td>
</tr>
</table>

</body>
</html>
</code>
I've tried adding <div style="width:924;height:668"> both before and after the
<td colspan="2"> tag of the AC_FL_RunContent section, but to no avail.
Thanks again to all of you!
-Mike

Dreamweaver CS3 - Database Panel Problem

I set up a site in Dreamweaver CS3 trial - my ColdFusion data
driven pages display OK in browser preview but I when I try to
display my datasources in the Database panel I get error "server
name or address cannot be resolved" even though the server name is
correct and working. The site's testing server is set up properly
(they run in the browser) and coldfusion is running properly.
I removed the connection scripts but that was no help. I'm
using the miserable SQLServer 2005Express (I tried checking
security permissions in WinXP - my file system is NTFS so there
*should* be a "Security" tab present in properties for me the
change permissions but it's not there...
i've run out of ideas - does anyone have any suggestions that
I can try?
thanks!

schep wrote:
> I set up a site in Dreamweaver CS3 trial - my ColdFusion
data driven pages
> display OK in browser preview but I when I try to
display my datasources in the
> Database panel I get error "server name or address
cannot be resolved" even
> though the server name is correct and working. The
site's testing server is
> set up properly (they run in the browser) and coldfusion
is running properly.
>
> I removed the connection scripts but that was no help.
I'm using the
> miserable SQLServer 2005Express (I tried checking
security permissions in WinXP
> - my file system is NTFS so there *should* be a
"Security" tab present in
> properties for me the change permissions but it's not
there...
>
> i've run out of ideas - does anyone have any suggestions
that I can try?
> thanks!
>
I can't help you with the central issue, but permissions in
XP are
controlled by a setting in folder options.
start, control panel, folder options, view. Near the bottom
of the list
is an option that by default is checked - "Use simple file
checking".
Try unchecking it, and you should be able to access the full
security
tab for files.
Harvey

Dreamweaver cs3 deactivation/activation problem

I am trying to deactivate Dreamweaver CS3 on my windows pc and it is not working. I have tried to activate it on my laptop but am having no success with that either. My Dreamweaver CS3 serial number is
<Edited by moderator>
Please can someone help with this problem ?
Regards,
Lynne Goddard

Broadcasting your serial number to the entire internet probably isn't going to help things in the activation department.
Can a moderator delete that?
See if anything here helps: Re: Dreamweaver CS3- Can't activate after reformat of hard drive
If not, go here: Contact Customer Care
Choose Adobe Dreamweaver
Choose How To's and Troubleshooting
Choose Troubleshoot
Click the Still Need Help button to get a phone number or direct chat with adobe support.

Dreamweaver CS3 strange FTP problem

Helllo,
I have just passed from windows to Mac (I got Leopard) .... I
have installed Dreamweaver CS3
and I have imported all the site definition (like Host FTP,
username, password, etc...) from the windows version
But when I try to connect to any server, I recive this error
"An FTP error occured - cannot make connection to host
no response from the server this may be due to one or more
reasons:
- Accessing the server requires firewall settings that aren't
properly set. Please verify that the firewall settings in the Site
category of the Preferences dialog box are properly set, and that
the Use Firewall option in the Site definition dialog box is
selected.
- The server may be accepting only passive mode or only
active mode. Toggling the "Use Passive FTP" checkbox may help you
establish a connection.
- If you are connecting to an IPv6 enabled server, please
select "Use IPv6 transfer mode" checkbox in the Advanced site
definition dialog.
- Your local firewall may be blocking the incoming FTP data.
Please disable it to see if it makes a difference.
- It is possible your FTP may be using a non-standard FTP
port (21). If you need to specify a non-standard port, enter the
port number after host name separated by a colon":". "
I have tryed to use other FTP programs and I got mix results:
Cyber Duck and Fetch are working
Fugu and Filezilla for Mac do not connect to any server
I am clueless .... .... can someone give me a hand?
thanks in advance

Are you running a firewall?
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"sharemind1" <[email protected]> wrote in
message
news:[email protected]...
> Helllo,
>
> I have just passed from windows to Mac (I got Leopard)
.... I have
> installed
> Dreamweaver CS3
> and I have imported all the site definition (like Host
FTP, username,
> password, etc...) from the windows version
>
> But when I try to connect to any server, I recive this
error :
>
> "An FTP error occured - cannot make connection to host
> no response from the server this may be due to one or
more reasons:
>
> - Accessing the server requires firewall settings that
aren't properly
> set.
> Please verify that the firewall settings in the Site
category of the
> Preferences dialog box are properly set, and that the
Use Firewall option
> in
> the Site definition dialog box is selected.
>
> - The server may be accepting only passive mode or only
active mode.
> Toggling
> the "Use Passive FTP" checkbox may help you establish a
connection.
>
> - If you are connecting to an IPv6 enabled server,
please select "Use IPv6
> transfer mode" checkbox in the Advanced site definition
dialog.
>
> - Your local firewall may be blocking the incoming FTP
data. Please
> disable it
> to see if it makes a difference.
>
> - It is possible your FTP may be using a non-standard
FTP port (21). If
> you
> need to specify a non-standard port, enter the port
number after host name
> separated by a colon":". "
>
>
>
> I have tryed to use other FTP programs and I got mix
results:
>
> Cyber Duck and Fetch are working
>
> Fugu and Filezilla for Mac do not connect to any server
>
> I am clueless .... .... can someone give me a hand?
>
> thanks in advance
>

Dreamweaver CS3 Site Manager Problem

I am using Dreamweaver CS3 and when I define my sites in the
Site Manager, for some reason now when I definte the Host
Directory, which looks like this:
"//caflsd/share/DEPTS/BIOSCI/BSWeb/ " (note the two "/" at the
beginning) once I hit the done button and try to connect, I get an
FTP error, and when I go back in to the Site Manager, I will see
that one of the slashes in front of the Host Directory Address is
removed, so it looks like this "/caflsd/share/DEPTS/BIOSCI/BSWeb/"
which misses the first slash. When I put it in manually while in
the Site Manager and test the connection while in the Site Manager,
it works fine...however, when I hit OK and Done, it always cuts out
the extra "/" and then the site will not connect outside of the
Site Manager. How can I get it to stop this?

i posted a reply. sorry new to this forum. the only message I receive is that there is no repsonse from the server. Initially I can connect fine and downloand all remote files. It is only when I go to upload that I get disconnected. I can upload fine with an older version of DW. I do not know if I can upload to other sites.
I called my server and was told everything on their end was fine and they tested it and was able to upload. So I am thinking it must be DW CS3

Frameset browse problem in DW CS3

In DW CS3, if I try to browse locally, a CFM file containing
a frameset, my browser opens with the PHYSICAL path of the file
instead of the localhost web url, and so the file is not parsed and
I see only HTML/CFML. This does NOT happen with CFM files w/o a
frameset, so I know that all the DW settings are correct. Also,
this problem does not happen in Homesite+.

Are you not flying any more, Roy? 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Roy Reed" <royreed@_NOSPAM_reeddesign.co.uk> wrote in
message
news:f3kiq8$p40$[email protected]..
> Does anyone else have a problem with DW CS3 displaying
PNGs with 8 bit
> colour and no transparency? I'm seeing them corrupted
whether they're
> made in Fireworks or Corel PhotoPaint. They display
correctly in all
> other programmes that can view PNGs.
>
> I've done a test to show the problem at
www.reeddesign.co.uk/dw-png/.
> The top table shows the real PNGs and below is a screen
grab from DW
> Design View showing the same table with the corruption
problem in the top
> two.
>
> Roy

Dreamweaver cs3 new browser window

I have a link on my page which will display image in new browser window and window size is fixed but problem is it will display white background but i want it will display black blackground. i have more than 20 link of such type which will display image in new browser window of fixed size.
Rajeev.

Hi Rajeev,
Based on what Paula (PZ) has written I was experimenting with things at my end also.
@Paula: I took a different approach ...actually did this approach for the first time. Your solution of using document.write is perfect but I thought to share a way which I tried also...you may find it interesting
Here it is:
I created a link in the parent page <a href="javascript:;" onclick="openwin('property_files/banner.gif');">Link</a> and defined the openwin() funtion as following:
<script type="text/javascript">
function openwin(imgpath){
window.open('imagewin.html',imgpath,'status=yes,scrollbars=yes,resizable=yes,width=800,he ight=600');
</script>
In the above i am passing the image path from the link's click and using it as window name (second argument in the window.open)
Now I created this blank imagewin.html which has following code:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
<style type="text/css">
-->
</style>
<script type="text/javascript">
function showImg(){
var imgval=window.name;
document.write('<img src='+imgval+'>');
document.bgColor='black';
</script>
</head>
<body onload="showImg();">
</body>
</html>
So on this blank page I am calling a showImg() function and then I have captured the window name into a variable and then used document.write to create the image tag with the captured path and finally set bgColor as black.
So using this one can simply pass the imagepath from each link and it would display new image each time!
Worked well for me!!!
Hows that?
More than anytihng I just loved the fact that there is so much try and experiment with....I just love all this
Regards
Vinay

When I open dreamweaver cs3 i have problem

It says : The following translators were not loaded due to errors: spry.htm: has configuration information that is invalid.... Than I cannot INSERT any pictures or INSERT even tables.... The same message appear everytime... Pls help me what should I do to correct ? I have CS3 dramweaver...
Thank you very much for your help...

Dreamweaver FAQ
JavaScript and other unexpected errors
Mark A. Boyd
Keep-On-Learnin' :-)

CS3 Preview Browser Problem

Hi there, I just downloaded the CS3 trial version and noticed
that in the Browser Preview mode, none of the CSS related
information or imagery shows althought it seems to be linked
correctly. The styles info and images show correctly in the design
view and also when the pages are published accross all browsers.
Any ideas what causes this? Thanks.

VIEW | Style Rendering > Display Styles
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"HTML-Newbie" <[email protected]> wrote in
message
news:f224ig$1nf$[email protected]..
>
>
> Hi there, I just downloaded the CS3 trial version and
noticed that in the
> Browser Preview mode, none of the CSS related
information or imagery shows
> althought it seems to be linked correctly. The styles
info and images show
> correctly in the design view and also when the pages are
published accross
> all
> browsers.
>
> Any ideas what causes this? Thanks.
>

Dreamweaver CS3 Div Alignment Problems.

I have been building a website on my new MacBook. I have it
just about done so I uploaded it to my web host to check out the
appearance. It looks great on my Mac, but I checked it on my
parents PC and it looked terrible. Being a new Mac user, I thought
it was something going on with the operating systems, but I checked
it on a Mac deskop and the alignment was still messed up. On the
Mac desktop it is too far to the left and on the PC it is too far
to the right. This is the link to the site:
http://www.potomacsouth.com/Home.html
You can click View>Source to see the code.
I noticed if you drag the window to a different size the
images behind the div move, but the div stays in place. Is there
some kind of code or something that I can do to make it stay in the
designated area on every computer regardless of settings?
Thanks.

evansdb78 wrote:
> I noticed if you drag the window to a different size the
images behind the div
> move, but the div stays in place. Is there some kind of
code or something that
> I can do to make it stay in the designated area on every
computer regardless of
> settings?
Thats because you are using Absolutely Positioned
<divs> so they stay...
well.... Absolutely Positioned i.e., they WILL NOT move as
you increase
or decrease the width of the browser window.
Solution:
Open your page and go to code view
FIND THIS PIECE OF CODE:
<div align="center"><img src="
http://www.potomacsouth.com/Site-Top.jpg"
width="832" height="558" /><br />
CHANGE IT TO:
<div style="position: relative; width: 832px; margin: 0
auto;">
<img src="
http://www.potomacsouth.com/Site-Top.jpg"
width="832"
height="558" /><br />
NOW FIND YOUR ABSOLUTELY POSITIONED <DIV> CODE:
<div id="apDiv2">
<p class="style6"><u><span
class="style8">Welcome</span></u><span
class="style8">!</span></p>
<p align="left" class="style5"> Welcome to
PotomacSouth.com where
you can leave your work and worries on the beach. Whether you
are
looking to get in on the fishing action Maryland and Virginia
waters
have to offer, or take a tour to one of our destinations via
the water
Potomac South can get you there. We offer tours of St. George
Island
and its surrounding waters including a look at what the local
fish nets
have caught, stop and see the Lighthouse, and two state
parks, Historic
St. Marys City, and Point Lookout. If food is on your
mind take an
evening cruise to catch a bite to eat at The Mooring
Restaurant. If you
have any questions or are interested in a trip today give
Captain Dan a
call or email through our Contact Us
link.</p>
</div>
MOVE IT TO DIRECTLY BETWEEN THE TWO LINES OF CODE YOU
ORIGINALLY
CHANGED. SO IT LOOKS AS BELOW:
<div style="position: relative; width: 832px; margin: 0
auto;">
<div id="apDiv2">
<p class="style6"><u><span
class="style8">Welcome</span></u><span
class="style8">!</span></p>
<p align="left" class="style5"> Welcome to
PotomacSouth.com where
you can leave your work and worries on the beach. Whether you
are
looking to get in on the fishing action Maryland and Virginia
waters
have to offer, or take a tour to one of our destinations via
the water
Potomac South can get you there. We offer tours of St. George
Island
and its surrounding waters including a look at what the local
fish nets
have caught, stop and see the Lighthouse, and two state
parks, Historic
St. Marys City, and Point Lookout. If food is on your
mind take an
evening cruise to catch a bite to eat at The Mooring
Restaurant. If you
have any questions or are interested in a trip today give
Captain Dan a
call or email through our Contact Us
link.</p>
</div>
<img src="
http://www.potomacsouth.com/Site-Top.jpg"
width="832"
height="558" /><br />
NOW FIND THE 'apDiv2' CSS IN THE HEAD SECTION OF YOUR PAGES
CODE AND
CHANGE THE 'LEFT' AND 'TOP' POSITIONING AS BELOW.
#apDiv2 {
position:absolute;
width:315px;
height:358px;
z-index:1;
left: 70px;
top: 160px;
overflow: auto;
THATS IT. IT SHOULD NOW MOVE AS YOUR BACKGROUND IMAGE MOVES

Dreamweaver CS3- Add this button code help

Hi, I have a problem in Dreamweaver CS3. The problem is that when I insert my add this button code, in to the codeing area, it does not work.
When I open my page in chrome, it simply says 'more shraeing services'. I will copy the code, in to this discussion. I would be greaftful if someone
can help me resolve this problem, so I can get the add this button to work on my site. The final bits of code are as follows-

<div class="addthis_toolbox addthis_default_style addthis_32x32_style">
<a class="addthis_button_preferred_1"></a>
<a class="addthis_button_preferred_2"></a>
<a class="addthis_button_preferred_3"></a>
<a class="addthis_button_preferred_4"></a>
<a class="addthis_button_compact"></a>
<a class="addthis_counter addthis_bubble_style"></a>
</div>
<script type="text/javascript">var addthis_config = {"data_track_addressbar":true};</script>
<script type="text/javascript" src="http://s7.addthis.com/js/300/addthis_widget.js#pubid=ra-4dd57258352fac8e"></script>


<g:plusone></g:plusone>
</div>
</form>
<script type="text/javascript" src="http://www.google.com/jsapi"></script>
<script type="text/javascript">google.load("elements", "1", {packages: "transliteration"});</script>
<script type="text/javascript" src="http://www.google.com/cse/t13n?form=cse-search-box&t13n_langs=am%2Cel%2Cml%2Cpa%2Cta%2Car% 2Cgu%2Cmr%2Cru%2Cte%2Cti%2Csa%2Cne%2Chi%2Cbn%2Cen%2Ckn%2Cfa%2Csr%2Cur"></script>
<script type="text/javascript" src="http://www.google.com/coop/cse/brand?form=cse-search-box&lang=en"></script>
<script type="text/javascript" src="http://www.google.com/cse/query_renderer.js"></script>
<div id="queries"></div>
<script src="http://www.google.com/cse/api/partner-pub-5783950232732081/cse/4522012035/queries/js?oe=UT F-8&callback=(new+PopularQueryRenderer(document.getElementById(%22queries%22))).render"></script>
</div>
<div align="center"></div>
</div>
<script type="text/javascript">var addthis_config = {"data_track_clickback":true};</script>
<script type="text/javascript" src="http://s7.addthis.com/js/250/addthis_widget.js#pubid=ra-4dd57258352fac8e"></script>

</div>
<script type="text/javascript">

</script>
</body>
</html>
Is there anything in this piece of code I should edit in order to make the add this button work? Many thanks

A link to your page would be the best possible way to get help with this.
Code fragments don't tell the whole story.
Nancy O.

Dreamweaver CS3 frameset browse problem

Similar Messages

Maybe you are looking for