Dreamweaver cs3 FTP Fault - Not connecting anymore
Hi,
I hope someone may know the cause of this wierd problem
My dreamweaver cs3 has just stopped connecting to server for
any of my sites
(i got over 100 sites and tried quite a few).
My other ftp program external to cwcs3 is fine and continues
to work. This
using the same connection settings as dwcs3 site profiles.
Nothing has
changed on my dwcs3 profiles but yestarday I had the daylight
saving problem
(and last year) where i had to delete the cache file as per
adobe tech doc.
DW no longer crashing but i think this ftp not connecting is
only since
yesterday.
I have also installed the various windows updates that came
out recently.
The other machines in the office continue to work fine. All
machines import
the same saved profiles, but if i remove the site profile and
reimport it
still dosent connect, but repeating this on another machine
works without a
problem.
All machines in this floor have Vista Business/ CS3 web suite
connecting to
a windows 2003 standard ed server running iis and
iis/microsoft ftp server.
Same result with windows firewall disabled. Only other
security app is NOD
anti-virus, again all machines are the same.
All i get is an error telling me to try passive etc, but i
know this isnt
the fault as the other machines with the same settings are
fine..
here is a copy of the ftp log after trying to connect,
selecting a file, and
selecting put.
< 220 Microsoft FTP Service
> USER mmdftp
< 331 Password required for mmdftp.
> PASS
< 230 User mmdftp logged in.
> PWD
< 257 "/mmdftp" is current directory.
> PWD
< 257 "/mmdftp" is current directory.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> MKD MM_CASETEST4291
< 257 "MM_CASETEST4291" directory created.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> RMD mm_casetest4291
< 250 RMD command successful.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> PWD
< 257 "/mmdftp/carrs-billington.com" is current
directory.
> QUIT
< 221
> CWD
/mmdftp/carrs-billington.com/mmdftp/carrs-billington.com
< 220 Microsoft FTP Service
> USER mmdftp
< 331 Password required for mmdftp.
> PASS
< 230 User mmdftp logged in.
> PWD
< 257 "/mmdftp" is current directory.
> PWD
< 257 "/mmdftp" is current directory.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> PWD
< 257 "/mmdftp/carrs-billington.com" is current
directory.
The file "/mmdftp/carrs-billington.com/Company.asp" was
skipped because the
old remote file could not be deleted.
If i was that anal about cpu overhead, would i be using
dreamweavers built
in ftp with its feature 100%cpu usage. Even on my core 2
extreme 9000 cpu!!
Thanks for the links, but everything in them has been ruled
out. The issue
is clearly not a setting within dw. Its some sort of windows
firewall
corruption
Even running wf.msc (advanced win firewall config) provides
no clues
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
>> why on earth?? why on earth not!
>
> If you are connecting via a router, wherever you are,
you do not need a
> firewall. Firewalls add overhead to your CPU and can get
in the way of
> other things, unexpectedly.
>
>> What puzzles everyone is why is still happens even
with windows firewall
>> disabled (even not behind any firewall or router wen
tested with usb
>> broadband via vodaphone)
>
> Disabling a firewall is sometimes like disabling Norton
AntiVirus.
> Neither of those will ever see the light of day on my
computers! 8)
>
> Anyhow, you may find this useful -
>
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19012&sliceId=2
>
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "RyGa" <[email protected]> wrote in message
> news:[email protected]...
>> why on earth?? why on earth not!
>>
>> This is a laptop and only sped 60% of its life in
the office. All
>> machines in here are identical an this is the first
problem with this
>> setup in over 4 years out of 23machines. so i doubt
its a security issue.
>>
>> I have also discover renamining the dreamweaver
folder allows dream
>> weaver.exe to function ok. whatever is causing the
problem it is tied to
>> the full path.
>>
>> Our it people have also copied renamed cuteftp to
match the same path/
>> exe name and it too fails to function but renaming
the exe back to its
>> proper cuteftp name allows it to work.
>>
>> What puzzles everyone is why is still happens even
with windows firewall
>> disabled (even not behind any firewall or router wen
tested with usb
>> broadband via vodaphone)
>>
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> So - you are running Windows Firewall AND a
network firewall? Why on
>>> earth?
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>> ==================
>>>
>>>
>>> "RyGa" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> Ok, im getting some where with this...
>>>>
>>>> I found this thread
>>>>
http://dreamweaverforum.info/dreamweaver-general/20168-dreamweaver-ftp-suddenly-stops-work ing.html
>>>>
>>>> which had this solution:
>>>>
>>>> The problem was in Windows Firewall, which
did not recognized the
>>>> Dreamweaver on some way even it was removed
from the Windows Firewall
>>>> exceptions.
>>>>
>>>> The solution is a bit tricky:
>>>> 1. Remove the Dreamweaver from the Windows
Firewall Exceptions
>>>> 2. Copy & Paste Dreamweaver.exe on the
Program
>>>> Files\<Macromedia|Adobe>\Dreamweaver\
directory to a new executable
>>>> filename (e.g. Dreamweaver2.exe)
>>>> 3. Run the renamed program. After the first
FTP connection Windows
>>>> Firewall will ask for permissions for
connection
>>>> 4. Close Dreamweaver and run original
executable. SOLUTION: Windows
>>>> Firewall will ask for the permision.
>>>> 5. Remove Dreamweaver2.exe from WF
Exceptions
>>>> 6. Enjoy developing and uploading new sites
>>>>
>>>>
>>>> Now as i said previously, I have tried
disabling the windows firewall
>>>> but to no avail. but however, renaming (and
coping to a different exe
>>>> name) the dreamweaver.exe file allows me to
launch the newly named file
>>>> and ftp works fine.
>>>>
>>>> But following the solution above makes no
difference if i run the
>>>> original exe, I dont get to re-add to
firewall exceptions even though
>>>> it isnt there anymore, and the dw still
refuses to play ftp.
>>>>
>>>> I think this is a corruption of some sort
with windows firewall.
>>>>
>>>> Id like to get to the bottom of it though,
because after googling for a
>>>> while i see lots of others are having the
exact same issue. Even if the
>>>> problem is windows firewall related and dw
is innocent in all this, its
>>>> still good to have a solution for anyone
else to follow.
>>>>
>>>> I dont think leaving the dreamweaver.exe
called dreamweaver2.exe is it
>>>> as this breaks all the current registry
references to the proper file
>>>> name.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\SharedAccess\Parameters\FirewallPolicy\F irewallRules
>>>>
>>>> "Dooza" <[email protected]> wrote
in message
>>>> news:[email protected]...
>>>>> RyGa wrote:
>>>>>> I should have mentioned. Last night
i took my laptop home as i do
>>>>>> quite frequesntly.
>>>>>>
>>>>>> The problem remains even though in a
completely different
>>>>>> environment, so that rules out
network at work.. I even tried
>>>>>> disabling all security apps (win
firewall, nod and even that win
>>>>>> defender)
>>>>>>
>>>>>> My cuteftp using the same login
credentials (exactly the same)
>>>>>> continues to work without a problem.
>>>>>>
>>>>>>
>>>>>> I have this morning went through the
site area of the dreamwaever
>>>>>> options and double checked they are
the same as the machine nearest
>>>>>> me and they are.
>>>>>>
>>>>>> still no joy..
>>>>>
>>>>> Very odd indeed, maybe backup all the
site files and re-install
>>>>> Dreamweaver? Its a last ditch effort
though, as its a very strange
>>>>> problem.
>>>>>
>>>>> Dooza
>>>>
>>>
>
Similar Messages
-
CS3 FTP will not connect!
I am quite furious with Adobe. I paid the $450 to upgrade
from 8 to the Creative Suite 3 Web Standard package and installed
it last night. The main reason for the purchase was for Dreamweaver
CS3. I manage about 10 sites for clients and wanted to upgrade from
Studio 8 to CS3.
The installation went smoothly, no glitches... I fired up
Dreamweaver and began trying to connect to all of my sites.
Dreamweaver could only connect to three of my 10 sites. All other
sites gave me the standard login in inocorrect or wrong password
notice.
I then checked to make sure the firewall settings were
correct and the timeout set at something greater than 2 seconds. No
luck.. the program still will not connect to my sites.
I do a search on Google and discover that this appears to be
a well known issue with Dreamweaver CS3 but I can't find any real
answers as to how to fix the problem. One would think that Adobe
would address this on their own site but I can't seem to find a fix
there either.
I am using Windows XP Pro with Service Pack 3 installed. My
old version of Dreameweaver (8) still functions and can connect to
all sites.
I find this absolutly maddening that such a well known issue
has not been corrected by Adobe. They have posted nothing about a
fix or workaround. They continue to sell a product that obviously
has issues.. one of the most important issues.. being able to FTP
from the program.. one of the features I have loved about all
previous versions of Dreamweaver.. now seemingly rendered
useless... but I still pay a premium to upgrade to a program that
does not work.
Mad, you bet! Macromedia did not have these issues.. and just
try to get tech support to help you at Adobe.. I end up in
Bangalor, wait forever and then "Mike" puts me on hold afterwhich I
get disconnected and a dialtone.
Has anyone been able to solve the FTP probelm with DW CS3? Is
there documentation somewhere? Is there a webpage that clearly
outlines what to do to fix this issue? I'm out $450 here and mad as
hell!I finally got CS3 working by removing all the sites currently
definded from the program then recreating them all over again...
That's not the way this should work and I still can't believe Adobe
has not addressed the problem in some manner. I searched and
searched for info on this issue and found nothing but posts
regarding firewall issues and 2 second timeouts.. none of which
would have solved my problem.
Adobe's switch to outsourced "help" is a further irritant.
Several times I have called support and ended up being disconnected
when the support guy could not "fix" the problem.
I bought a CS3 updgrade for Dreamweaver months ago but it
would not install because I had the Studio 8 product. I was
informed that I had to buy the CS3 Suite to upgrade Dreamweaver. So
I was out the money for the store bought boxed upgrade.. Adobe told
me to submit a LOD "Letter of Destruction" along with proof of
purchase and they would refund the money... that was over six
months ago and I have yet to see a dime. Every time I call about it
I end up talking to "Mike" in India and the connection gets
dropped.
Needless to say I am very dissappointed with Adobe these
days... on a number of levels. -
Dreamweaver CS3 ftp won't connect
Very unusual ftp problem: Server is MS IIS. I have multiple
Dreamweaver sites defined for this server. Been using them for
years. All sites connect fine except one. The one initially worked.
For the one problem site, clicking the Test button in Remote Info
tab connects just fine. Clicking the Connect button in Files will
time out every time. Using WSFTP to the same site and folder works
just fine. The only difference between this site and the ones that
work is the folder name. They even share the same parent folder.
ftp connection parameters are the same. How can this be?I solved it myself. It turned out to be a corrupt site
definition in Dreamweaver. By deleting the site, then recreating
it, everything works as it should. -
Ftp problem , Not connected.
I am trying to ftp to one window server from my labtop but can't , i can ftp to other unix servers, any idea to fix this?
C:\Users\arif.gulzar>ftp orasbo2
ftp> dir
Not connected.
ftp> bye
C:\Users\arif.gulzar>ftp 172.29.0.119
ftp> dir
Not connected.
ftp>
C:\Users\arif.gulzar>ping orasbo2
Pinging orasbo2.internal.local [172.29.0.119] with 32 bytes of data:
Reply from 172.29.0.119: bytes=32 time=60ms TTL=123
Reply from 172.29.0.119: bytes=32 time=56ms TTL=123
Reply from 172.29.0.119: bytes=32 time=54ms TTL=123
Reply from 172.29.0.119: bytes=32 time=55ms TTL=123
Ping statistics for 172.29.0.119:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 54ms, Maximum = 60ms, Average = 56msHi.
It's look like ftp server on orasbo2 is not started.
For check:
on orasbo2 netstat -na | grep 21
For enable.
Solaris 10:
svcadm enable ftp
Solaris 9 and below:
Edit /etc/inetd.conf for uncomment ftp and restart (kill -HUP) inetd
Regards. -
Logic remote of my iPad is not connecting anymore with Logic Pro X of my i Mac
Logic remote of my iPad is not connecting anymore with Logic Pro X of my i Mac.
Pls help
tks
Kind Regards
Richard Garrell
Belo Horizonte
BrazilHi Richard Gl ,
Welcome to the Apple Support Community!
I understand that your Logic Remote is not connecting. In this situation I suggest reading over the attached information and making sure that Logic Remote is set up correctly. I would also suggest trying to connect using Wi-Fi and Bluetooth.
Logic Remote for iPad: Get started
Cheers,
Joe -
Dreamweaver CS3 FTP Error: Cannot make connection to host
I have Windows Vista with a new purchase of Adobe Dreamweaver
CS3 Web Premium. I am a regular Dreamweaver user since version 2.
But this FTP situation still baffles me.
1. I have set up all my FTP parameters as usual and have
tried to use "Passive FTP" and the "Secure FTP" settings, but to no
avail
2. I tried to FTP via explorer and do have access to my
hosting service. The problem lies related to Dreamweaver itself.
3. I tried to check to see if my Windows Firewall would
affect it, but it is included in the firewall exception list.
I checked the other forum listings related to this problem,
and one of them mentions about the 60 second issue. I also checked
my site preferences and it is set to 60.
I don't want to use Cute FTP. I've been using Dreamweaver for
all these years and found it annoying to get another program just
for this. I am hoping to resolve this issue here on the forums so
that other Dreamweaver CS3 users can use FTP to upload their
site.http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_14834
http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_19012
Maybe those will help.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"David J." <[email protected]> wrote in
message
news:fj5vul$mi2$[email protected]..
>I have Windows Vista with a new purchase of Adobe
Dreamweaver CS3 Web
>Premium.
> I am a regular Dreamweaver user since version 2. But
this FTP situation
> still
> baffles me.
>
> 1. I have set up all my FTP parameters as usual and have
tried to use
> "Passive
> FTP" and the "Secure FTP" settings, but to no avail
> 2. I tried to FTP via explorer and do have access to my
hosting service.
> The
> problem lies related to Dreamweaver itself.
> 3. I tried to check to see if my Windows Firewall would
affect it, but it
> is
> included in the firewall exception list.
>
> I checked the other forum listings related to this
problem, and one of
> them
> mentions about the 60 second issue. I also checked my
site preferences and
> it
> is set to 60.
>
> I don't want to use Cute FTP. I've been using
Dreamweaver for all these
> years
> and found it annoying to get another program just for
this. I am hoping to
> resolve this issue here on the forums so that other
Dreamweaver CS3 users
> can
> use FTP to upload their site.
> -
Hi,
I am unable to connect to my remote server using my new copy
of Adobe Dreamweaver CS3
When I test the FTP connection I get an error message
I can connect without problems to my remote server using
Microsoft Frontpage and the exact same FTP address, login, and
password - so it is not the server which is at fault
Things I have tried without success
My hosting company told me to either leave the host directory
box blank or put a / in it. Neither of these options work
I have tried retyping my login details carefully.
I have tried checking the ‘use passive FTP’ box
I have tried putting a colon and the port number after the
FTP address
I have tried writing the FTP address with and without the
ftp:// symbol
I have tried setting the FTP time out preferences at 60secs,
30 secs, 120 secs, 10 secs, and 5 secs
I am wondering what else to try, and how I can check whether
or not the software is being blocked by a firewall (in Norton for
example - my windows firewall is switched off) as I do remember
getting a message about this during the install. Or would it be a
good idea to uninstall and reinstall the software?
I would be most grateful for any further information or
advice.
Many thanks
Pippa> When I test the FTP connection I get an error message
What is the error message?
Here's my experience.
1. A firewall (any firewall, including but not restricted to
SP2) may be
blocking your attempts. It's best to completely disable them
while you are
troubleshooting this.
2. The FTP host field should usually always be filled in like
this -
''www.domain.com'' (without the quotes) and with NO leading
protocol (e.g.,
http:// or ftp://) (of course, you can always
use the IP address, too).
3. Enabling Passive FTP (usually the default for 3rd party
FTP programs) in
your Remote site definition can often be the gating factor in
a balky FTP
connection.
Make sure you use those guidelines and usually your
connection problem will
be solved.
By the way, if you find that #1 allows the connection to
proceed, then you
have to figure out what it is about your firewall that is
blocking
transmissions. CS3 allows you to fine tune firewall support
via the
Remote site definition, but you may also need to do a very
simple thing of
permitting CS3 to make outgoing connections in the Firewall
configuration.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Pippa Mattinson" <[email protected]> wrote
in message
news:[email protected]...
> Hi,
>
> I am unable to connect to my remote server using my new
copy of Adobe
> Dreamweaver CS3
>
> When I test the FTP connection I get an error message
>
>
> I can connect without problems to my remote server using
Microsoft
> Frontpage
> and the exact same FTP address, login, and password - so
it is not the
> server which is at fault
>
> Things I have tried without success
> My hosting company told me to either leave the host
directory box blank or
> put
> a / in it. Neither of these options work
> I have tried retyping my login details carefully.
> I have tried checking the ?use passive FTP? box
> I have tried putting a colon and the port number after
the FTP address
> I have tried writing the FTP address with and without
the ftp:// symbol
> I have tried setting the FTP time out preferences at
60secs, 30 secs, 120
> secs, 10 secs, and 5 secs
>
> I am wondering what else to try, and how I can check
whether or not the
> software is being blocked by a firewall (in Norton for
example - my
> windows
> firewall is switched off) as I do remember getting a
message about this
> during
> the install. Or would it be a good idea to uninstall and
reinstall the
> software?
> I would be most grateful for any further information or
advice.
>
> Many thanks
>
> Pippa
> -
Dreamweaver CS3 Remote files not visible
Hello,
I have a problem with DW CS3. When I click on remote view, I
cannot see my files. I can connect via Filezilla, and I can log
onto the remote server control panel and all of the files are
there. The site is working fine. When I try "preview in browser"
command, I get a page cannot be found error. Afterward, there is a
folder visible in remote panel with the temp file in it. Here is
what I have tried so far:
Deleted the site in site management panel and set up again as
new site.
Toggled passive FTP, same problem either way.
Everything was working fine until this week when I started
having problems getting DW to connect via ftp. The connection
became intermittent, then seemed to die. Now when I use the site
management panel to test the connections, they work fine, but I
can't see the files.
I have not recently installed or changed any software on my
PC.
I am using Win XP
Any ideas?Please tell us the following:
1. Do you have a Testing server defined? If so, what are the
field
contents on that page?
2. When you connect to the site and then expand the Files
panel, which
server icon at the top is selected? Is it the one with the
lightning bolt?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jackhmr" <[email protected]> wrote in
message
news:gmcgk7$ihr$[email protected]..
> Hello,
> I have a problem with DW CS3. When I click on remote
view, I cannot see my
> files. I can connect via Filezilla, and I can log onto
the remote server
> control panel and all of the files are there. The site
is working fine.
> When I
> try "preview in browser" command, I get a page cannot be
found error.
> Afterward, there is a folder visible in remote panel
with the temp file in
> it.
> Here is what I have tried so far:
> Deleted the site in site management panel and set up
again as new site.
> Toggled passive FTP, same problem either way.
>
> Everything was working fine until this week when I
started having problems
> getting DW to connect via ftp. The connection became
intermittent, then
> seemed
> to die. Now when I use the site management panel to test
the connections,
> they
> work fine, but I can't see the files.
>
> I have not recently installed or changed any software on
my PC.
> I am using Win XP
> Any ideas?
> -
Using CS4, used to work, now will not connect with any ftp settings. Using "test" says connected right away, try all combinations of ftp setting and will not connect. Same pw and user will work thru Filezilla and older version DW. This the screen that comes up.BTW, works on ALL other DW projects, all hosted by same company but not this one...it is on a different server...
I went to an older computer with Dreamweaver MX, set up identically, and connects to ftp right away, no problems. Other websites i have with DWCs4, no connection problem, it is jsut this one site, the one I need to work on. And it connects thru Filezilla...frustrated no end. Also, on other computer, same website will not connect thru DWCS4...sure could use a solution.
-
Dreamweaver CS3 Menu's not working
Using shortcuts or even manually clicking on the menu items
to say "Put" a file, it just doesn't work. I don't get it. It
worked fine... then (if memory serves me) when I downloaded a CS3
update to all my cs3 applications, it stopped working.
Any ideas what this is and how to fix it, besides
uninstalling the update?
JPAre you working from a site definition? Can you connect to
the remote site?
Can you GET files from it? Does this happen with all your
sites? Does this
site have a testing server defined?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"joshperkins40207" <[email protected]> wrote
in message
news:f4ndd2$8vq$[email protected]..
>I don't know what I'm saying. Bottomline, some menus are
not working. I'm
>on
> a mac.
>
> CMD+SHIFT+U should upload (put) a file. It doesn't work.
Well before you
> think I changed my shortcuts, going to the menu and
choosing SITE > PUT
> doesn't
> work either.
>
> A couple other things like right clicking on the Files
area to "add a
> folder"
> or "create a file" doesn't work. I click it... nothing
happens.
>
> Dreamweaver CS3 is the only software I am having this
problem with.
> -
DreamWeaver CS3 FTP suddenly stops working
About a week ago DreamWeaver's FTP stopped working, for any
of the 25 plus sites I have set up in it. I control the server I am
trying to FTP to, so I know none of the passwords or anything else
has changed. All of the sites have the same error when trying to
connect, which is:
"An FTP error occurred - cannot open remote folder
/public_html/. Access denied. The file may not exist, or there
could be a permission problem."
Well the folder does exist, as nothing has changed. I am able
to FTP fine with other FTP apps including CuteFTP, so I know this
is a DreamWeaver specific problem. I tried reinstalling / repairing
DreamWeaver from disc to no avail.
Thanks for any help.....I'd like to chime in too if I may. Dreamweaver is a very
reliable software client but can anyone really backtrack to the
point where ftp puts GUI to shame? Forgive me but I'm stuck using
Dreamweaver as my sole island of hope for all client/ server
transactions.. I'm not even interested in using one of those 'mini'
clients who's functionality do make your head spin! I'm somewhat of
a freestyle learner so maybe that explains why I've never seen the
host-server designated "public" folder renamed as "public_html"???
I don't even think my webhost would let me rename that folder as
such, I hope that helps!
Thanks,
Nate -
FTP service not working anymore. ??
We have successfully been using ftp service with a new XServe 2 (Base Station 802.11n as gateway) for about a month. But, possibly following the latest firmware update that was run on the base station a few weeks ago, the ftp service just stopped working.
FTP works within the network if I connect via Cyberduck using the internal server address. But, to connect from the outside using the IP that is offered from within Base Station—the way we've done this successfully for a whole month—Cyberduck will spin and spin and never even see the network much less attempt to authenticate. Crazy.
• I have done a hard reset on Base Station. No change.
• I have unplugged and reset cable modem multiple times. No change.
• The ISP has confirmed that ports 20 and 21 are still open. Nothing unusual from their end.
• I've used ServerAdmin multiple times to stop & start ftp service, restart server, etc. No effect.
• Here's a curious detail: from the server I can go to whatismyipaddress.com, and it correctly sees the Base-Station-issued IP that I am trying to connect via ftp from the outside. Hmm.
Any experience from someone who can help isolate this issue? I'll admit, it appears to be a Base Station issue (maybe. likely.) since I can connect ftp from within the network. And, I am about 60-70% certain the latest firmware update was run near the time it spontaneously stopped working. But, ftp had been working. Not sure what is different now or why resetting things is not fixing anything.
Thoughts? Thanks in advance!
GregYeah im able to connecto to my account no problem. Its that everytime I try to log in to my email on my N8, it keeps saying it could not connect. I just dont understand what this has happened, I never had such problem before.
Did Nokia close hotmail accounts acces for Symbian phones or something? -
My computer does not connect anymore to my airport express
i have an airport express for years and since a few days my computer manages less and less to connect to it. it sees it in the available networks but it does not connect to it automatically and when i try to join it with my password it fails to connect as well. when i go to the airport utility and scan for available devices it does not find it. i can connect through a direct ethernet cable to my cable modem so it's not my internet provider the problem. when i turn on the computer it sometimes gives me the signal that the airport device is on (the little fan) but as soon as i open a browser it greys with a little exclamation mark.
any thoughts on what i could do? would a factory settings restore solve the problem (last resort as i would have to remember all the right settings that have to do with my internet provider plus passwords for station and joining networks, grrr)?Aimée Z. wrote:
since a few days my computer manages less and less to connect to it.
If you unplug the AirPort Express, wait a short time, then plug it back in, does it work better (at least for a while)?
would a factory settings restore solve the problem
If you can get AirPort Utility to recognize it at all, use the menu option File -> Export Configuration File to save the configuration settings. Then you can do a factory reset followed by File - Import Configuration File to reload those settings.
There's a chance that it would help to reset the connection settings on your Mac using these steps one at a time until it works again, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
6) In the folder /Library/Preferences ( not <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
They may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder. -
My touch will not connect anymore
I downloaded the I06 update for my touch, and since I did so, my device will not connect to the internet. When I go to wi-fi, the two routers I own show up, but when I access either of them, the touch connects, then disconnects, then sends me to apple.com to log in, but it says the page I am looking for cannot be found, and there is no connection. Help!
yea. i attempted those suggestions, its still not working. Also, earlier today, i found that its only my router its not connecting to. I'm able to connect to other wifi just fine. i don't know what else i can do except bring my ipod back to apple and see if they can fix it or something.
but please keep offering suggestions! Bringing this back would be my last choice. -
Dreamweaver CS3 menu icons not displaying
I just recently reinstalled my OS X and CS3 Suite with the original CDs because there were some issues with Illustrator unexpectedly closing before it had even opened the desired file. The reinstalls went without problem on all applications in the suite except Dreamweaver; the application menu icons are now replaced "broken image link" icons, and my ftp connect button has disappeared as well.
Here is a screen shot of what I'm looking at in the Dreamweaver interface:
http://i38.photobucket.com/albums/e120/wbelyea/Screenshot2011-04-28at123001PM.png
I have tried repairing/reinstalling the application by itself and the entire suite, but I am still getting the same result, and only in Dreamweaver.
I have also tried clearing the .plist file and cache, but that hasn't helped either.
Has anyone heard of this happening before? I've had a difficult time finding anything similar on the forums.
Thanks in advance for your help!
Willthe.hugonaut wrote:
I'm using OS X 10.6
I've just repaired permissions(without issue), and did a quick Disk Verify after that, this what came back:
Invalid volume file count
(It should be 615725 instead of 615726)
Invalid volume directory count
(It should be 173801 instead of 173800)
The volume Hugonaut HD was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
[could this be the cause of the issue?]
Yes that could definitely be the root of the issue. Put your OSX disc or disc that came with your Mac and boot up to that. Run the disk repair utility from the menu at the top of the screen (you don't need to re-install OSX). See if it can be fixed.
And just a friendly reminder, make a backup of really important data before doing too much more.
Maybe you are looking for
-
Tooltips Not Appearing in Firefox
I searched for answer to this problem, which I thought must be common, but didn't find anything. I added a tooltip using Dreamweaver CS4 insert Spry tooltip option. The tooltip appears with Internet Explorer 8, but not Firefox 3.5.7. The tooltip is
-
E-mail address added to incoming invitation
Hello, Last time I get more and more invitiations in iCal (as expected, it's agreed with the sender). Thet send the invitation from either Outlook or Lotus Notes. When I look in the invitation not only my mail address is in it, but also the one of my
-
Hello, there i need help uploading my project on ROME by adobe i showed you what i did ok i clicked on output then clicked templete something forgot what that last word was then i pressed share then it ses you been loged out what do i do please help
-
Using the Exceptions Table in a Mapping.
Hi,<BR><BR> For a specific mapping I want to catch errors (exceptions) caused by Constraint Violations. I Tried setting the Exceptions Table Name in the configuration of the mapping on the Target table but this doesnot seem to work. I guess I'm missi
-
UDM_DISPUTE - Change field
Hello All, We have a requirement where we need to add extra details into the description of the sold-to party in UDM_DISPUTE transaction. For example there is a sold-to-party 123556 and the description shown is ABCD ,we would like to change the descr