Dreamweaver CS3 Install on Vista Home Prem

Hi there
I have just got a new laptop with Vista Home Premium
installed and I have attempted to install Dreamweaver CS3. The
first day it seemed to work fine until I got a message stating that
registration had failed catestrophically. It then shut down and I
was unable to run it since.
I have uninstalled the program, checked that all previous
installs had been unregistered and Installed again.
When I double click to run the application I get the little
circle icon that I guess replaces the egg timer in vista but then
after a second or two it disapears and nothing happens.
I have tried to uninstal, repair the installation but to no
avail. I even tried setting the clock to before the time change
last month as that caused an issue on the XP install on the old
computer but nothing seems to work - does anyone have any
ideas?????
I have had a look around the forums but not really came up
with anything.
Thanks in advance

Thanks SnakEyez02 .
The Windows restore said that it failed the two times that I
tried it. But after doing this I tried Dreamweaver again and it
seems to be working. The registration has failed again however I am
able to use it. Hopefully one time it wil let the registration
complete.
Thanks for your help.
Brian

Similar Messages

Need Help upgrading IQ816t Touchscreen from Vista Home Prem to Win7 Ult

I purchased (eBAY) 25" IQ816t with Vista Home Prem, and seller provided Win7 Ult AIO disk with the deal. Seller reset to base OS prior to shipping to me. Everything works fine w/Vista.
When trying to run the AIO disk, using UPGRADE mode, I get conflicting message(s)...you can not upgrade from 64 bit to 32 bit;...and you can not upgrade from 32 bit to 64 bit. What gives? I am doing something wrong?
Seller firm in that they had Win7 Ult running fine and that the AIO disk should work fine.
Thanks in advance.
Mike

I have the same model you have. Our model is Vista 64, so if you are trying to upgrade, you can only upgrade to Win 7 64, and it sounds like you got a Win 7 32 disc. See if it will let you do a full install of it and not an upgrade, if it won't, you need to get the Win7 64 disc for this.

Better privecy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers?

Question
better privacy does not work with windows vista home prem. what other program removes LSO'S AND HOW can I stop trackers? edit
Details

As a temporary workaround, I believe this Adobe management page allows you to clear your "Flash cookies": [http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager07.html Adobe - Flash Player : Settings Manager - Website Storage Settings panel] (hosted on macromedia.com -- Macromedia was the original developer of Flash).
Regarding the script error, if I'm reading the script correctly, it is related to accessing your Flash cookies directory. It seems the publisher's support forum is not currently available for searching, but that might be a good next step.
In the meantime, could you check whether the script has the correct location for your Flash cookies directory? If you can't access Tool > BetterPrivacy, you could check here:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''bpr''' and pause while the list is filtered
(3) There should be a bolded setting named '''extensions.bprivacy.DataDir''' which looks approximately like the following:
C:\Users\''yourWindowsUsername''\AppData\Roaming\Macromedia
Do you have a similar value? If you paste the path used by BetterPrivacy into a Windows Explorer window, does it open? Also, click a couple levels in the folder, can you see:
Flash Player \ #SharedObjects
If the value is wrong, right-click the wrong value and choose Reset. BetterPrivacy should update the value the next time you try to access it.
If the value is blank, you could try inserting a sensible value and see whether that helps.
Any luck?

Can I access my music library on a 32bit PC running Win Vista Home Prem from a 64bit Laptop running win 7 Pro.

Can I access my music library on a 32bit PC running Win Vista Home Prem from a 64bit Laptop running win 7 Pro.I can logon to iTunes from the laptop but can't download my previous purchases thru the wifi.

Miketroach wrote:
Can I access my music library on a 32bit PC running Win Vista Home Prem from a 64bit Laptop running win 7 Pro
Yes.
The following article(s) may help you.
Troubleshooting Home Sharing
Security Software Issues
Troubleshooting Wi-Fi networks and connections
Recommended Wi-Fi settings
Wifi Diagnostic Software (for Mac users)
You may also find some help on this page, where I’ve collected some of the more unusual solutions to network issues.
When making adjustments to your network for better optimisation, you may find some of the points mentioned on this page helpful.

Windows Vista Home prem Sleep issues on macpro

Hi all i recently purchased a Macbook Pro 15" 2.5 processor and duel booted it with vista home prem,
(i use refit as my boot-up program)
recently after using the vista side more often i've discovered that if i leave the laptop on and its idle it will go into sleep or hibernation not sure which one(i use a LED mouse which stays on during the laptops 'sleep' state), however i cannot re-awake the laptop from this state i usually have to turn the laptop off then on again, when entering windows after i have done this it says its recovered from a serious error and would i like to start in safe mode etc..
i was wondering if anyone else has had this problem and knows a way to solve it,
thanks all

It is possible that even the latest Apple BootCamp 2.1 drivers don't handle the latest MBP hardware.
Early on, hibernation was a problem for anyone on Vista, PCs as well as Macs.
I have to unplug my mouse and keyboard when it goes into hibernation. When you restart in that manner, do you do a chkdsk or have any errors crop up as a result? I know on OS X side that can leave the disk dirty and in need of repair.
PS: I thought you were talking about the desktop MacPro, not the MacBook Pro...

DW CS3 fails to Install in Vista Home Premium

Hi,
My new DW CS3 disk will not install DW to my Vista Home
Premium machine.
I am looged on as admin. I have tried the suggestions on the
support page. Disabled norton, Disabled Google toolbar. Tried to
weed out incomplete Adobe files etc.
Starngely older Adobe apps, Premiere Pro and After Effects
installed with right click and selecting "run as XP program. i have
found no way to do this with the CS3 disk.
A forum search uncovered no new ideas. Two other DW support
forums have been fruitless also.
I need this to run ASAP.
Any help would be appreciated.
Thanks,
Adrian

If that fails to solve the problem, then I recommend you
contact Adobe
directly and use one of your one-on-one support incidents.
http://www.adobe.com/support/programs/dreamweaver/index.html?tab:contact=1
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Vidflow" <[email protected]> wrote in
message
news:fp5pi7$jv5$[email protected]..
>I have now tried to install DW CS3 8 more times.
>
> I have tried the following suggestions from listers and
the university
> help
> desk;
>
> 1. running cmd and typing regsvr32 jscript.dll to fully
establish admin
> privledge.
>
> 2. Using AdobeCS3Cleaner in both methos 1 and then 2 to
clean out old
> files
> that might interfere. MS cleaner was installed also as
per Adobe
> instructions.
>
> 3. Running msconfig to do an alternate shutdown of all
non MS program,
> virus
> checkers, etc.
>
> 4. I have used these separatedly and in combination. The
same failure to
> install DW CS3 occurs. DW does not get installed and
shared components
> also
> fail.
>
> This is maddening.
>
> Adrian
>
>
>
>
>

Windows Vista Home Prem SP1, iTunes 76, after install, refuses to launch

I have just resinstalled Windows Vista Home Premium to a 1 yr old Acer 5610 laptop.
Installed Vista SP1.
Downloaded and installed latest (v7.6.something) iTunes and let it do the full, all apple media installation. It seemed OK, showed his music, let us reactivate the computer and loginto iTunes store.
But now, one day later, when he starts computer, it refuses to lauch when iTUnes is clicked. just acts as if nothing was happening.
So tried to uninstall iTUness and planned to do a reinstall, but now the uninstall has been running 30 minutes and seems to be doing nothing.
Any thoughts on what is going on here?
Should I force the uninstall by using a 3rd party Uninstaller tool?
Should I download iTunes + Quicktime separately as EXE and run the installer again (I have downloaded it (57MB) to my Mac and plan to take it over to the Vista laptop on Monday when i am there again).
Any other thoughts on why it worked once after the install and now has gone silent?
thanks!

Well that's weird that it quit working. Was that the first time the PC had been restarted since a lot of stuff got installed?
The uninstall shouldn't take more than a min or so.
Use the Microsoft Installer Cleanup Tool:
http://support.microsoft.com/default.aspx?scid=kb;en-us;290301
Norton or other security software can cause that, there are several other reasons too...

Firefox CS3 very slow (on Vista Home Prem. 64 bit)

Firefox CS3 is running very slow on Vista Home Premium 64
bit.
New Gateway AMD Phenom quad-core (2.3 Ghz quad) with 8 GB of
Ram.
The rest of the CS3 suite works fine, but there's a delay
every time I do anything in Fireworks.
I upgraded from 4 GB of Ram to 8, thinking that might make a
difference. But the problem remains essentially the same. I've
gotten all Adobe updates, but nothing seems to solve it.
Originally, I thought it was a matter of having other programs open
that was bogging it down. But even when it's the only program open,
it runs slow.
I was wondering if there are some other settings I need to
change, or what... The last Macromedia version of Fireworks ran
much faster on my XP system with less power and Ram, so this just
doesn't make sense...
Any tips are appreciated. Thanks!

64 bit? Umm...hmm.
First, other people have mentioned problems with FW CS3 on
Vista compared to either running on XP or other CS3 apps on Vista,
so you aren't alone. Unfortunately, nobody seems to be able to pin
down the conflict. Possibly AV, but (if I remember correctly) the
other person who posted about FW CS3 being slow didn't see an
improvement when he turned his AV off.
You might try turning off Aero for Fireworks, that helps with
the bitmap tools. If it's some other conflict, then it's going to
be a matter of experimenting.
I'm running Vista Home Premium 32 bit, and I don't notice any
trouble with FW CS3 (well, except for the bitmap tools, which I
don't use so I haven't bothered turning off Aero). My AV is NOD32,
though, and it's one of the smallest, most nimble AVs out there.

Installation of Adobe Indesign CS3 on Windows Vista Home Premium

Hello,
I can not install Indesign CS3 on my Notebook.
The operating system is Windows Vista Home Premium SP1.
The error message contains: "Internal Error 2739".
It is coming at the beginning of the installation.
Can anybody please help me?
Alois Blaimer

Yes, for installation issues, please call Adobe Technical Support. There is no charge for assistance with installation issues. This is not an issue that you should can expect support for on this forum.
- Dov

HELP ACR 4.6 fails to load/work in photshop CS3 running on vista home premium

Can anyone help me. i had photoshop CS3 on windows xp and it loaded up canon 450d raw files happily/and bridge worked fine- showing raw thumbnails.
now i loaded onto new laptop running vista home premium and it works that is cs3 but auto installer cannot upload new 4.6 raw update (the last one for cs3) and when i look at bridge thumbnails for raw do not work. and when attemp to load a raw file from my canon 450d into photoshop it says file not type recognised or supported or similar.i have service pack 1 installed i believe with vista.
just do not know what to do!!!

Follow the manual instructions from this page:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=4040
Thanks, adriana

Trouble with Dreamweaver CS3 Install

Greetings all. I installed Dreamweaver CS3. After this, I had
a system problem (unrelated) to which I had to do a system restore
which went back to before Dreamweaver CS3 was installed.
I now want to install The Web Premium CS3, but the install
says I can't install Dreamweaver because of a conflict. There is no
uninstall (in control panel) for Dreamweaver CS3 and there are not
even any EXE files in it's folders (product of System Restore I am
guessing?)
How can I get this uninstalled so I can install the entire
package?
Thanks for the help!!

What's the exact error message you're seeing? See if these
help:
Error "Installing Adobe Photoshop CS3 results in a conflict
with Adobe
Photoshop CS3" when you install Creative Suite 3 or Photoshop
CS3
http://www.adobe.com/go/kb401551
Remove Creative Suite 3 and CS3 point products from Windows
XP, Windows
Vista and Mac OS
http://www.adobe.com/go/kb401090
kb401090 points to a Clean Script that will remove files and
registry
entries if Add/Remove Programs isn't working.
David Alcala
Adobe Product Support

CS3 install on Vista issues. Not installing all apps, just MM stuff...

I'm having CS3 install errors/issues too with Vista.... I've uninstalled CS2 Creative Suite on my laptop to be able to update it to the standard I have in my shop (4 computers running their own license of ProdSuite:CS3 = $3996 of Adobe product) and my understanding is we can also install on second computer, which I want to do on my new laptop (Windows unfortunately Vista).
I uninstalled CS2, I've run the Adobe CScleanup app. And then go to install CS3 suite and it acts like it fully install until the end. I then get the 'Failed components' which happen to be all the Adobe stuff: InDesign, Illustrator, PScs3ext., Bridge. All the Macromedia stuff installed: Dreamweaver, Flash.
So, what's it take. When I call Tech support of course they want $40 to solve this. Which ticks me off because I've spent a fortune with this company and all I want to do is use it on my laptop so I can work with the files while out of the office.
Anyone know the trick to install (yes, I'm installing as Administrator and it's the only login) on Vista?

Yeah, I've done that search 'CS3 Vista install' and I've followed all of what I've found and yet still have issues.
I may just spend a weekend, format the laptop and reinstall Vista and all of my apps all over again. So far I'm not getting anywhere with the uninstall of CS2 and install of CS3. Getting too many errors and wasting too much time.
If I go from a fresh box I'll not install anything first until CS3 is fully installed. Then install all my other needed apps.
Any thoughts prior to me doing this (which is a ton of time)?

Acrobat 8.1.2 on Vista Home Prem. SP1 - Adobe Printer Failure

I've searched these forum for a similar case but I've been unable to find a fix.
I had to uninstall and reinstall this Acrobat Standard 8.1.2 on a system with Vista Home Premium (32bit). I could not print to the Adobe printer from Outlook Express, MS Publisher, Internet Explorer until I disabled UAC. With UAC disabled it works fine. This program was working fine before I had to reinstall it. Do you know if there is a MS Hotfix to fix this version of Windows? I see references to the 64bit version. Any help would be appreciated. Apologies if this has already been addresses.
Bob Miller

OK, here is a new twist. I had a problem with a program called Blood Pleasure Tracker by Soundtells. I lost a year of data. Note sure what happened but I decided to restore to a point yesterday that was just before installing installing Adobe Acrobat the last time hoping I would get the data back. I thought there might be trouble with Adobe after restoring to this point so I did another install and then did an Uninstall with a program called REVO Uninstaller. (REVO Uninstaller was reviewed in PC World). I used it to get a clean uninstall. When I reinstalled Acrobat and the 8.1.2 update everything worked! Acrotray was still running. UAC was also reactivated. The one thing that I think made a big difference is the REVO Uninstaller has several option to more toughly do a clean uninstall. I used the medium selection. It listed some registry entries that it thought could be deleted. I don't like messing with the registry so I declined that option. It also scanned and listed a bunch of files that were left in the Adobe directory. I made the selection to delete those. I wonder if there was something in those files that doesn't get written over on the install but can cause the problem I was having with the printer. Everything worked after that. <br /><br />It should be noted that I had no problems with Acrobat AA8.1.2 until I did an uninstall via the control panel and they tried to do an install. I did the uninstall because It started showing the registration screen each time I brought it up even though I had registered it. I think Registry First Aid caused that little problem. I won't be running that again........<grin>.......sorry for the ramblin'......<br /><br />Bob Miller

Dreamweaver CS3 Install

I am rebuilding my system with XP SP3. Installed Photoshop
CS4. Now am trying to install Dreamweaver CS3 vrom DVD, and it
fails. Shared components go in fine, but that's all. I need to make
a custom installation to a different drive. That option is not
shown in the standard installation sequence.
Any help appreciated.

What error(s) are you getting on the fail?
Depending on the issue you may want to check out Adobe's
support section here and submit a ticket. They will allow you to
upload files to them like the installer log to see what the problem
is. Just remember that it is a holiday weekend and the new year
weekend is right around the corner so there may be a delay with
their basic support response.

Can't run updater 8.0.2 on Dreamweaver CS3 install

I have that FTP user name and password problem where it's
lost every time you re-start the program. Reading this forum I
found that I needed to use the updater 8.0.2. That downloaded fine
and when I tried to run it I got the following message:
The upgrade patch cannot be installed by the windows
installer service because the program to be upgraded may be
missing, or the upgrade patch may update a different version of the
program. Verify that the program to be upgraded exists on your
computer and that you have the correct upgrade patch.
I double checked I downloaded the English version of 8.0.2
and I have the English version
My disk is an upgrade disk which I've also had in the drive
during the update.
I tried totally uninstalling dreamweaver and then installing
and doing the update again.
Regardless I get this error, I also get the error with 8.0.1
updater
Any suggestions?

Your subject line says you're trying to run this on DW CS3.
It's already
built in to CS3. The 8.02 updater was for DW 8.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"derkdiggler" <[email protected]> wrote in
message
news:ffip5h$s3t$[email protected]..
>I have that FTP user name and password problem where it's
lost every time
>you
> re-start the program. Reading this forum I found that I
needed to use the
> updater 8.0.2. That downloaded fine and when I tried to
run it I got the
> following message:
>
> The upgrade patch cannot be installed by the windows
installer service
> because
> the program to be upgraded may be missing, or the
upgrade patch may update
> a
> different version of the program. Verify that the
program to be upgraded
> exists
> on your computer and that you have the correct upgrade
patch.
>
> I double checked I downloaded the English version of
8.0.2 and I have the
> English version
> My disk is an upgrade disk which I've also had in the
drive during the
> update.
> I tried totally uninstalling dreamweaver and then
installing and doing the
> update again.
>
> Regardless I get this error, I also get the error with
8.0.1 updater
>
> Any suggestions?
>
>

Dreamweaver CS3 Install on Vista Home Prem

Similar Messages

Maybe you are looking for