Dreamweaver CS3 not displaying all PhotoShop CS4 galleries correctly

I maintain and support a camera club website for the Peoria Camera Club in Peoria, Illinois.
I recently added 6 new galleries to the website.
These are the current galleries: Nature 1,Nature 2,Nature 3,Nature 4,Open 1,Open 2,Open 3,Open 4,Open 5,PJ 1,Creative 1,Creative 2,
Urban Landscape.
These galleries are located at
http://www.peoriacameraclub.com/competitions/Gallerys/gallery.html
Here's the story:
Running a browser test on my local location everything works perfectly and all of the images are accessible and work smoothly.
After uploading to my server, a number of galleries are not working correctly.
I have followed this scenario.......
All of the galleries seem to be functioning correctly except for Nature 4, Open 3, Open 4, and Creative 2.
I recreated Creative 2 from scratch and re-uploaded with no effect
First, all of these galleries worked in the testing mode using internet explorer on my laptop.
All of the images appeared and ran perfectly.
Unfortunately, the four previously mentioned galleries displayed a smaller number of images although the count on the page is correct.
I’ve re-uploaded the galleries using Dreamweaver including the gallery html page.
That accomplished nothing; things were the same.
I used Filezilla to re-upload the 4 galleries plus the gallery html page.
Filezilla runs a lot faster that Dreamweaver.
Again, nothing changed.
I have no explanation why the majority of the galleries are working and a few are incomplete.
These galleries were created in PhotoShop CS4 Bridge.
I have searched the web and the forums at Adobe and NAPP and other bread crumbs from the net.
Any suggestions would be appreciated.
Thanks.
Jim

It seems to fail at the point where there are missing images. For example, Nature 4 fails to display thumbnails in image 11, which according to its group.xml is the same as the following 404 Not Found images.
/competitions/Gallerys/Nature%204/resources/images/thumb/GREAT%20BLUE%20HERON%20&%20CHICK%20by%20Rich%20Seeman.jpg
HTTP/1.x 404 Object Not Found
/competitions/Gallerys/Nature%204/resources/images/medium/GREAT%20BLUE%20HERON%20&%20CHICK%20by%20Rich%20Seeman.jpg
HTTP/1.x 404 Object Not Found
And likewise for Open 3. It falls apart on the third image according to its groups.xml file and that corresponds exactly with these missing images.
/competitions/Gallerys/Open%203/resources/images/thumb/03%20Birdhouse%20&%20Flowers%20by%20Veronica%20Anderton.jpg HTTP/1.x 404 Object Not Found
HTTP/1.x 404 Object Not Found
/competitions/Gallerys/Open%203/resources/images/medium/03%20Birdhouse%20&%20Flowers%20by%20Veronica%20Anderton.jpg HTTP/1.x 404 Object Not Found
HTTP/1.x 404 Object Not Found
I didn't check the other two galleries, but it is probably similar. I am guessing that you somehow forgot to upload those images or they got uploaded to the wrong folders.
If you have FireFox, I recommend getting the LiveHTTP Headers and/or FireBug add-ons to help find these 404 Not Found headers.
BTW, I realize you already have a ton of files online, but you should be aware that it is not considered safe to use spaces in filenames or directory names. http://www.ietf.org/rfc/rfc1738.txt
Mark A. Boyd
Keep-On-Learnin' :-)
If you are reading this via email, be aware that it may not be an accurate representation of my message. Login to read the actual message and/or to reply.

Similar Messages

  • Dreamweaver CS3 Not Displaying Some Images

    Hi,
    About a week ago, certain images that have always displayed
    correctly within Dreamweaver started appearing as the "broken page"
    icon. A table background image I just created today decided it was
    going to act up as well. These images display fine in all the
    browsers, and the web pages I'm designing look right. But not being
    able to see these images within Dreamweaver makes designing very
    difficult. Any ideas?
    I am using Dreamweaver CS3 on a Mac Pro at work.
    Josh

    Looks like my message got lost. Would really appreciate some
    help on this as I have to use this software every day. Thank
    you.

  • Dreamweaver CS3 installation asking for Photoshop CS4 disc

    I am trying to install Dreamweaver CS3 from the original install disc and a progress bar gets about 1/2 way through the installation process and I'm asked to insert the Photoshop CS4 install disc.
    The Dreamweaver installation is not an upgrade. It is an original install.
    I am on a Mac, OS 10.6
    This is weird.
    Does anyone have a solution?

    Run this, the re-install.  Ignore the name of the file.  They condensed everything into one package for CS3-CS5 instead of separate packages for each:
    http://www.adobe.com/support/contact/cs5clean.html

  • All photoshop cs4 tools are not responding. how do I get them to work, again?

    all photoshop cs4 tools are not responding. how do I get them to work, again?

    Are Photoshop and OS fully updated and have you performed the usual trouble-shooting routines (trashing prefs by keeping command-alt-shift/ctrl-alt-shift pressed while starting Photoshop, 3rd party plug-ins deactivation, system maintenance, font validation, etc.)?

  • Windows Fonts Will Not Display In Photoshop Elements 9

    Hi,
    I have a new Windows 7 Home Premium 64 bit computer and have just installed Photoshop Elements 9. When I use the "Horizontal Text" tool and click on the fonts drop down list to select a font, it only lists a small number of fonts and does not display all the standard Windows fonts such as Arial, Times Roman, Verdana etc which all display perfectly fine in my other applications such as Word, Excel, Publisher, Notepad etc. Has any one got any ideas as to why all my Windows fonts are not displaying in the drop down list? Is there a special setting I need to configure for Photoshop 9 to see all my Windows fonts?
    Regards,
    Paul.

    Hi 99jon,
    Thanks very much for your reply. Yes I am using a Laptop and you were spot on. If I use the UP/DOWM cursor key's I can scroll through and see the list of all my fonts ok. I was originally trying this by using my scroll up/down wheel on my mouse and for some reason it will not scroll the list (I did not think to try the cursor keys) so thanks very much for your help!
    Paul.

  • Preview App not displaying all pages

    I am finding under Mavericks Preview App is not displaying all pages of some pdf's. 
    If you turn on thumbnails you can see and select all the pages but it's not possible to scroll down through all the pages.  Weird and annoying...

    First, before you do anything else at all, make a copy of your file as a backup. You said "Book" but I'm thinking you mean in one file, not a combined file InDesign Book (.indb) project.
    Now you need to test to see if this is a program problem or a file problem.
    Are the pages still there? Can you choose them from the navigation box in the lower left corner of the document window?
    Is this happening with any other documents? If you export this file to .inx (Interchange format) then open that, do the pages display properly?
    If it's happening in other docs, or if .inx doesn't solve the problem, look at how to replace your application preferences here: Adobe InDesign CS4 * Setting preferences

  • Form does not display all records from table

    Hi guys
    I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
    Any help will be appreciated.
    Thanks

    hi
    Set the block property of "Query All Records" to "YES"
    hope it will work.
    Faisal

  • DWMX Not Displaying All Files

    Hello folks. This is my last attempt to locate a solution for
    why my DWMX is not displaying all my files in my local or remote
    folder. I have a new client who has put us in charge of moving
    their site to a new server. When I create a new site in DWMX, it
    allows me to download and upload just fine, ALL of the site.
    Problem is, DWMX will only display a certain number of files in
    both the local and remote views. In my windows explorer, it shows
    all the files, on the new server it shows all the files, but DWMX
    will not. The folder in question is the dumping ground for all
    their self-managed content images for their site. So it is hard to
    split these up into multiple folders and expect the code to work
    properly.
    Has anyone else experienced this problem? If so, is there a
    solution to this problem with DWMX?
    Thank you.

    Are you using DMX6.0 or DMX6.1? If the former, please update
    to the latter
    at your earliest opportunity - use the updater on the Adobe
    site, please.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "csnetworks" <[email protected]> wrote in
    message
    news:fai93r$hj$[email protected]..
    > Hello folks. This is my last attempt to locate a
    solution for why my DWMX
    > is
    > not displaying all my files in my local or remote
    folder. I have a new
    > client
    > who has put us in charge of moving their site to a new
    server. When I
    > create a
    > new site in DWMX, it allows me to download and upload
    just fine, ALL of
    > the
    > site. Problem is, DWMX will only display a certain
    number of files in
    > both the
    > local and remote views. In my windows explorer, it shows
    all the files,
    > on the
    > new server it shows all the files, but DWMX will not.
    The folder in
    > question is
    > the dumping ground for all their self-managed content
    images for their
    > site.
    > So it is hard to split these up into multiple folders
    and expect the code
    > to
    > work properly.
    >
    > Has anyone else experienced this problem? If so, is
    there a solution to
    > this
    > problem with DWMX?
    >
    > Thank you.
    >

  • Status bar of Oracle from runtime applet is not displaying all of a sudden

    Hello,
    The status bar of Oracle form runtime applet is not displaying all of a sudden..It was displaying before but now its not......It helps me to see errors......how can I restore it?

    My console was set to a specific window name..it was not null at all....but the status bar wont show...
    But I solved it ...by changing the applet size...
    Applet container size is controlled by the HEIGHT and WIDTH parameters in the formsweb.cfg. To maximize the applet area to the size of the browser, do the following:
    HEIGHT=100%
    WIDTH=100%
    Thank you all for your help and support...
    Edited by: user10746194 on Feb 11, 2010 6:33 AM

  • I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7.   Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

    I wanted to know if others were having difficulties getting All Day Events appear in the Notification Center in iOS 7.
    Currently my Calendar in the notification center will show events that are at certain times, but they will not display All Day Events.

    Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

  • I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

    I have just installed iPhoto 11 and all of photos on my iphone have now all disappeared and ended up in my photo stream and the library in iphoto does not display all my pictures?? Can anyone help?

    And I cant work out why all of my pictures are not diplaying in iphoto?
    Is this iPhoto on your Mac?  Are you referring to the photos that were in your iPhoto LIbrary prior to the upgrade to iPhoto 11?  If so then apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
    If that's not what you're referring to then you should describe what is happening in more detail. Remember we can't see your Mac or your iPhone so need detailed and accurate descriptions of what you're experiencing.
    Also we need infomartion like do you have an iCloud account and are you logged into it on all of your devices, iPhoto and Mac? do you have Photo Stream enabled on both.
    OT

  • Photo App does not display all photos

    Running iOS 7.0.4 on an iPhone 4S. The new Photo App does not display all photos properly. All photos show up as thumbnails. However, when you tap on some of them, only a blank page is displayed. The rest is fine. This issue started after the upgrade to iOS 7. Is this a bug? Hardware-related?

    Upon closer inspection it appears that the missing photos are in a folder called IPhoto Library.  This folder is greyed out when I choose the import folder.
    When I use 'show package contents' it reveals the missing photos (below).  Why is my iphoto library so scrambled!  Thanks for any insight.

  • Query not displaying all records when execute it first tme

    Hello,
    i have an issue with the WEBI report.when i run  the report first time it's displaying only few records, but when i run the same report second time it's displaying the more records and it's correct.
    Could any one tell me why it's not displaying all records when i execute first time.
    Thanks in advance for your help.
    Regards,
    Prathap

    Which BOBJ version do you use?
    Which kind of data source are you retrieving data from?
    Regards,
    Stratos

  • Finder not displaying all files in remote directory

    Sorry, this is a repost as I have gotten no response from my original request here: Finder not displaying all files in remote directory
    I've exported pictures from iPhoto on my iMac to a shared directory on my mac mini. When I access that directory from my iMac, I can see some but not all of the pictures. I know the pictures exported properly because I can see them all from the mac mini. I can open up a terminal window on my iMac and see all of the files; I can also open those files from the terminal.
    I'm running OSX 10.9.4 on both computers, with the mac mini also running OSX Server. I've placed a screen grab below from my iMac of what Finder sees vs what I can see from the terminal.
    Why isn't Finder displaying all of my files?

    thanks for responding
    Adding a new file to the shared folder results in me being able to see the new file from my clients regardless of where it was added from, however the "hidden" files do not suddenly pop up.
    I tried a few more experiments that had interesting results, but still didn't lead me to an answer.
    First I tried copying the files from the remote directory to a local directory; I did this in 2 different ways and had different results. Method A) I copied files from the mounted share to a local dir: "cp /Volumes/MyShare/dir/*.JPG .". Method B) I copied the files using secure copy: "scp user@server:/path/to/dir/*.JPG .".
    Method A resulted in Finder not being able to see the files in the local directory, while Method B did. This was interesting and lead me to suspect an issue with the way I am sharing the directory on the server. From Server settings I have both afp and smb checked. I tried enabling only one or the other and reconnecting; but this did not fix the problem.
    Next I tried exporting the photos from iPhoto again. Exporting them locally results in files that Finder can see. Exporting them to my server results the same bad behavior
    Getting desperate, I also tried renaming all of the files from "*.JPG" to "*.jpg" but this didn't help.
    One last experiment, I see the same behavior from both another Mac and a PC on my local network... FTP works fine.
    Any more ideas?

  • Filter not displaying all values

    When I attempt to filter a product code. the drop down list (under heading Expression) displays about 100 codes when in reality there are about 2000 values.
    I have changed the Maximum Rows per Page under Search Bar to 2000, but this still does not display all the codes.
    Is there a setting I am missing?

    I think that your description of the problem doesn't help a lot. Are you using interactive reports?
    Denes Kubicek
    http://deneskubicek.blogspot.com/
    http://www.opal-consulting.de/training
    http://apex.oracle.com/pls/otn/f?p=31517:1
    -------------------------------------------------------------------

Maybe you are looking for