Dreamweaver CS3 quits when opening some .aspx files

Dreamweaver CS3 has begun suddenly quitting when opening some .aspx files - not all, just some. Other .aspx files open just fine. In most cases these files are virtually identical in every way from one to the next and still, one will open and the other will cause DW to crash. This problem just started about a week ago.
I have been running DWCS3 on the same Vista Ultimate machine for over 2 years now with Service Pack2 installed. Apart from these few .aspx files, the program is running as it always has... perfectly. Nothing has changed on the machine, nothing new is installed, and, as far as I know, no Windows updates have come through from MS.
I have tried bringing the files down from the remote server to see if my local copies were somehow corrupt but... same thing.
Any thoughts?

Similar Messages

Font errror when opening some FrameMaker files

When opening some FrameMaker files in Windows 7, my clients are getting the following message:
The FrameMaker Console provides these details:
The "Arial Black Bolded" Font is not available.
"Arial Black Heavy" will be used in this session.
The "Arial Black" Font is not available.
"Arial Black Heavy" will be used in this session.
The "Arial Black Bolded Obliqued" Font is not available.
"Arial Black Heavy" will be used in this session.
Even if you click OK on that message, and save the file, the same message appears the next time the file is opened.
My clients had this same problem when we upgraded to Windows XP Service Pack 3. I found a resolution regarding the Windows XP OS on this forum, but it does not apply in this case. My clients have FrameMaker 9.0.4 installed and Windows 7 64-bit (we had 32-bit Windows XP). I appreciate your help.

Art - Thank you for your quick response to our problem. Here's what my client replied:
The problem with changing the “Remember Missing Font Names” setting is that it causes all font substitutions to be accepted permanently. FrameMaker is currently making inappropriate substitions, for example so that our manual titles are not italicized as they should be.
We appreciate your help. Many thanks. Melissa

Dreamweaver CS3 Stalling when opening html files

Hello,
I have Dreamweaver CS3 running Mac OS X 10.5.2 on a new Mac
Pro, and have had no problems until now. All of a sudden,
Dreamweaver hangs for between 5 and 10 minutes when opening various
HTML files. Once the files are open, generally it's fine, without
any delays or other problems.
The files are email newsletters, with some of the images
hosted on a remote server, and some hosted locally on my computer.
The only difference I can think of is that I installed Fireworks
and Contribute yesterday, but I don't know if this is related.
Does anyone have any ideas what the problem could be, or if
there is anything I can do to solve it?
Many thanks in advance, D.

I also work with Dreamweaver CS3 running Mac OS X 10.5.2 on a
new Mac Pro
and have had no end of grief... just need to glance at it and
it will hang...
Now I have read the following:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401608&sliceId=1
with a last updated of 06-18-2007 (boy people work fast
around here)
Have tried all the suggestions listed there... and some
more... even reinstalled Dreamweaver... removed all extensions...
even shifted some of our files from the server to the local
machine... still hangs... used IP nos in FTP addresses, Rosetta
mode (that is ugly), removed splash screen, stopped images being
viewed from Internet, reset config files etc etc
I'm not really bleating at Adobe, as CS3 was out long before
Leopard... or is it the Intel based Mac Pro? ...I really don't
care... I just want a service pack from someone that will fix this
nonsense. I have seen many forum threads from all over with people
complaining about this issue.
We also had a you-beaut Mac server installed for our local
files (also running Leopard) and our PCs could not lock/unlock
files (again people pleading for fixes from all around the world).
Now this was a real pain when working in a team environment with
Dreamweaver. Answer to this... install Tiger on the server and all
came good again.
The mess we have had with Leopard and Dreamweaver far
outstrips Vista issues on PCs... on that note... also we run a new
HP PC... CS3 products are running like a dream on that machine.
Even an old PC P4 266 we have chugs (OK slowly) with all CS3 Design
Premium.
So back in 06-18-2007 Adobe admits there is a problem with
the new Macs running Leopard and Dreamweaver... we even had our
local Mac folk admit there are problems (that was like getting
blood out of stone for that admittance)
We have lost a tremendous amount of productive hours over
these issues... can someone from Adobe please communicate with
Mac/Apple over these issues... or is it a case of "it is not our
problem, they need to come up with a solution..."

DW CS3 crashes when opening older asp file made in DWMX

I have some asp files that were created in DW MXa dn when I
try and anything with CS3, CS3 simply crashes.
I get an "informative" ADOBE DREAMWEAVER CS3 has stopped
working"......okay thanks.
I am using DW CS3 with VIsta Ultimate.
I receive the following error....can anyone guide me as to
the solution?
Problem signature:
Problem Event Name: APPCRASH
Application Name: Dreamweaver.exe
Application Version: 9.0.0.3481
Application Timestamp: 4600622f
Fault Module Name: Dreamweaver.exe
Fault Module Version: 9.0.0.3481
Fault Module Timestamp: 4600622f
Exception Code: c0000005
Exception Offset: 002dab57
OS Version: 6.0.6000.2.0.0.256.1
Locale ID: 2057
Additional Information 1: f150
Additional Information 2: 112d33ddab86c076fa96123810cc4032
Additional Information 3: 7287
Additional Information 4:
6413fc23cc8b338dc85422963dbec2cd

I have just looked in another post and turning back the clock
on my pc seems to work for now.

Adobe Reader 9.x crashes when opening some pdf files that work fine with Adobe Reader 8.x

Adobe Reader 9 crashes when opening approximately 10% to 20% of the pdfs in my collection. The remaining 80% to 90% work without problems. The pdfs are launched by double-clicking the pdf file from Windows Explorer. The crashes occur with both v9.0 and v9.1. The pdfs that crash in v9.x work fine in older versions of Adobe Reader, such as v8.1.3. Furthermore, this behavior also occurs on all 3 virtual machine hosted on the same physical machine, with default Adobe Reader settings, for both v9.0 and v9.1. The virtual machines have little running in memory except standard Windows executables - i.e. they are fairly pristine. The operating systems for the virtual machines are XP SP3, XP SP2, and Windows Server 2003.
Error message info in all cases:
app=acrord32.exe
app version=9.1.0.163
module=jp2klib.dll
module version=2.0.0.2579
offset=0003277d
Operating system for real computer: XP SP3
CPU: 1333 MHz Athlon single core
RAM: 1 GB
To sum up, this problem happens on both a real computer running XP SP3, and also on all 3 virtual machines hosted on the same physical computer. I tried changing the Reader setting to not use hardware rendering, to no avail. I also tried various Data Execution Prevention settings in Windows, to no avail. All operating systems, the real and virtual ones, do not have problems with other programs that I use. I also tried a second machine with Adobe Reader v9.1 and the same exact problem pdfs, and had no issues. Thus, the problem happens on only one of the computers, but on the real and 3 virtual operating systems on that machine. There were no errors reported during any of the Reader installations. The virtual machines had no prior versions of Reader prior to Reader installation.

I did further testing of 10 single page pdf files which I created from a single book. All 5 pdf files with images crashed in Reader v9.1. 0 of the 5 pdf files without images crashed in Reader v9.1. Reader v8.1.4 crashes on none of the 10 pdfs. Note that the crash always occurs in jp2klib.dll, which according to the file property description is 'JPEG2000 Core Library', which deals with images. So it seems the issue is in Adobe's jp2klib.dll, in combination with the hardware/software that I have. I used Microsoft's DirectX Diagnostic Tool to test DirectX, including visual tests of DirectDraw and Direct3D - everything worked as expected with no issues detected. Some information about my hardware: Display drivers=Nvidia v84.21 Video card=GeForce FX 5200 with 128 MB RAM CPU=AMD Athlon (single core) System RAM=1024 MB in 3 DIMMs Further information about my hardware: (from the program System Information for Windows) Motherboard: Manufacturer=ASUSTeK Computer INC. Model=<A7V133> Version=REV 1.xx Chipset Vendor=VIA Technologies Inc Chipset Model=VT8363/5 KT133/KM133 System Controller South Bridge=82C686B PCI to ISA Bridge CPU=AMD Athlon Cpu Socket=Slot A / Socket A [SOCKET A] System Slots=5 PCI, 1 AGP OnBoard devices=<unknown> (Disabled) Promise PDC20265 Memory Summary: Location=System board or motherboard Maximum Capacity=1536 MBytes Memory Slots=3 Error Correction=None Use=System memory CPU Info: Number of CPU(s)=One Physical Processor / One Core / One Logical Processor Vendor=AuthenticAMD CPU Full Name=AMD Athlon CPU Name=AMD Athlon(tm) Processor CPU Code Name=Thunderbird Technology=0.18µ Platform Name=Slot A / Socket A Type=Original OEM processor FSB Mode=DDR Type ID=0 CPU Clock=1323.68 L2 Cache Speed=1323.68 MHz L2 Cache Speed=Full CPU Family / Model / Stepping=6 / 4 / 4 L1 I-Cache=64 KB L1 D-Cache=64 KB L2 Cache=256 KB RDMSR=00000000 00000000 00000000 00000000 MMX=Yes MMX+=Yes SSE=No SSE2=No SSE3=No SSE4A=No 3DNow!=Yes 3DNow!+=Yes DualCore=No HyperThreading=No AMD64=No NX=No VT=No PowerNow!=No LongHaul=No LongRun=No Architecture=x86 Video: AdapterCompatibility=NVIDIA AdapterDACType=Integrated RAMDAC AdapterRAM=128 MBytes Availability=3 Caption=NVIDIA GeForce FX 5200 ConfigManagerErrorCode=0 ConfigManagerUserConfig=false CurrentBitsPerPixel=32 CurrentHorizontalResolution=1280 CurrentNumberOfColors=4294967296 CurrentNumberOfColumns=0 CurrentNumberOfRows=0 CurrentRefreshRate=60 CurrentScanMode=4 CurrentVerticalResolution=1024 Description=NVIDIA GeForce FX 5200 DeviceID=VideoController1 DeviceSpecificPens=-1 DriverDate=20060309212900.000000-000 DriverVersion=6.14.10.8421 InfFilename=oem6.inf InfSection=nv4_NV3x InstalledDisplayDrivers=nv4_disp.dll MaxRefreshRate=75 MinRefreshRate=60 Monochrome=false Name=NVIDIA GeForce FX 5200 NumberOfColorPlanes=1 PNPDeviceID=PCI\VEN_10DEDEV_0322SUBSYS_91101462REV_A1\49AEDED500008 Status=OK VideoArchitecture=5 VideoMemoryType=2 VideoModeDescription=1280 x 1024 x 4294967296 colors VideoProcessor=GeForce FX 5200 BitsPerPel=32 DeviceName=NVIDIA GeForce FX 5200 DisplayFlags=0 DisplayFrequency=60 LogPixels=96 PelsHeight=1024 PelsWidth=1280 SettingID=NVIDIA GeForce FX 5200 SpecificationVersion=1025 BitsPerPixel=32 ColorPlanes=1 DeviceEntriesInAColorTable=-1 HorizontalResolution=1280 RefreshRate=60 VerticalResolution=1024 VideoMode=1280 by 1024 pixels, True Color, 60 Hertz Video Bios Version=Version 4.34.20.22.00 Video Bios Date=04/28/03 Name=GeForce FX 5200 Chip Type=GeForce FX 5200 DAC Type=Integrated RAMDAC Memory=128 MBytes BIOS: BIOS Version=ASUS - 30303031, Award Medallion BIOS v6.0, Award Plug and Play BIOS Extension v1.0A, Award Modular BIOS v6.0 BIOS Date=04/23/02 BIOS Web Page=http://www.award.com BIOS Vendor=Award Software, Inc. Version=ASUS A7V-133 ACPI BIOS Revision 1009 Release=04/23/2002 BIOS Size=256 KB Memory: Location=System board or motherboard Maximum Capacity=1536 MBytes Memory Slots=3 Error Correction=None Use=System memory Maximum Memory Module Size=1024 MBytes Device Set=DIMM 1 Device Locator=DIMM 1 Capacity=256 MBytes Memory Type=Synchronous DRAM Data Width=64 bits Form Factor=DIMM Total Width=72 bits Device Locator=DIMM 2 Capacity=256 MBytes Memory Type=Synchronous DRAM Data Width=64 bits Form Factor=DIMM Total Width=72 bits Device Locator=DIMM 3 Capacity=512 MBytes Memory Type=Synchronous DRAM Data Width=64 bits Form Factor=DIMM Total Width=72 bits

FCP 5 quits when opening a project file

Hello...hope someone can help.
I have a project file that gets past all the plugins (I don't have any extras) and then quits when it starts loading. Other project files load fine.
I trashed my preferences, restarted in safe boot and repaired permissions through the Disk Utility program. I moved my media to another folder...and it still does it for this one project file.
Any ideas?
Thanks..

try creating a new user on your computer. Open the project file under that new user. If it won't open, you have a corrupted project file. I hope you have a back-up!

Pages quits when opening an old file

I just purchased a new Mac Pro and transferred all of my old files from my MacG5. I purchased a new copy of iWorks 06 (Universal). When I opened an old file from Pages (PPC), Pages (Universal) would quit on me. I tried to open an old Keynote file, and Keynote (Universal) would also quit on me. Basically, I am unable to open any of my old Pages or Keynote files that were created with my older Mac G5. Any ideas what's going on here?
Thanks,
Mac Pro Mac OS X (10.4.9) PPC files will not open in Universal

I'd suggest first going into the /Library/Preferences folder (the one at the root of your hard drive) and deleting any preference files associated with iWork -- these will be of the form "com.apple.iWork/iWork06/Pages/Keynote.plist". Once this is done, I would re-install iWork '06, and see if the problems is solved.

Photoshop CS3 quits when opening PDF files

Does anyone have this problem? Because it happens to me a lot. I'll try to open a PDF with Photoshop, choose my settings, then it rasterizes the PDF and unexpectedly quits.
Then I'll try changing the color setting from RGB to CMYK and it will work. Or sometimes vice-versa. It is very annoying. I've submitted bug reports to Adobe as well as about 5 crash reports when it happened. It's not on the same file, but many different PDFs.
I have Mac OS 10.5.x now, but it did the same thing in 10.4.x
I think it has to do with the RGB vs CMYK color setting because it usually opens when changing it from one setting to the other. But I don't understand WHY that would cause PS to crash.

just created a new user account.
same problem. tried opening a cmyk pdf file in rgb mode and photoshop quits. opened in cmyk mode and it opened ok.
then tried opening a different cmyk pdf in cmyk mode and photoshop quits.
do you that have responded have intel macs?
have you tried opening a cmyk pdf in rgb mode?
just trying to find out what's causing this.

Photoshop CS3 crashing when opening or saving files

I wonder if anybody here know why this problem won't disappear even after reinstalling my Photoshop CS3? Whenever I try to open a file (any image format) or save by using Cmd+O, Cmd+S or the File menu in Photoshop, Photoshop is crashing. Brutal crash, goes down. This means I can't save anything I create. Exporting via "export to web" is working, but I can't save (or save as) PS documents.
I have deleted all prefs files etc, and reinstalled Photoshop CS3, but that did nothing.

Hi. To read about application crashes, you can look at http://www.tekserve.com/service/mac-faq/crashes-freezes/application-unexpectedly -quit.php and follow the suggestions in http://www.tekserve.com/service/mac-faq/crashes-freezes/application-troubleshoot ing.php. In particular, I would check for updates to your Photoshop application. The disk installed version of Photoshop CS3 had various problems with Leopard. As I remember, one of the problems was crashing when using the Open and Save dialog boxes. If for some reason you can't update to the latest version of CS3, or you're already at the latest version, you could try going into the Photoshop preferences and seeing if there is a toggle for Adobe dialog boxes vs Apple dialog boxes. I recall CS3 having such a setting but I can't find it in CS4 right now. I also recall having a similar problem with CS3 and Leopard until I ticked that checkbox one way or the other. Good luck!
Jeremy A.
Tekserve Intern
As an intern at Tekserve, I may receive financial compensation for my recommendations and links.

Flash CS3 crash when opening a .FLA file on Mac OSX

I'm not sure if I'm the only one having this problem. I've
experienced similar issue with Flash 8 on my Mac OSX. I was
expecting CS3 will fix these but I'm wrong.
The problem is: Flash will randomly crash when I try to open
a FLA source, or when I try to publish the file to a SWF file. It's
not always happening, it's like I'm ok in the morning but crash
everytime I open the file afternoon.
If any one of you had similar issues, please share

Indeed! I actually love my mac. Its a mac book pro that I
have had since October of 2006. I have literally had no issues with
anything since I got it until I installed Flash. 8 crashed every
now and then - but as I work on a piece today using CS3 - it
crashes on average every 15 to 20 minutes. There is no reason this
should be happening. It's completely unacceptable! When you think
about the price tag they put on the new CS3 suite (web premium) -
this software should be folding my effing laundry and making me
margaritas too!
And you are right! I work at a creative agency where we use
macs. Adobe has always made their products better on the mac side.
But this just sucks. They should have held off padding their
pockets until their product was right.
Just another company that forgot what quality is. Good
lookin' out, Adobe!

CS3 crashes when Opening and saving files - also runs slow

Today, while using photoshop, it locked up on me & I had to force quit. It then wouldn't open a file either via Bridge or the open menu. I could create a new file, but it would hang while attempting to save.
I downloaded and ran the FixVCUIFramework, and it allowed me to open and save 1 file, before it started not saving or opening again. Running the Fix again has no effect.
I switched to another user account, and everything works fine - in fact PS runs much speedier in the 2nd user account than in my main account. I hadn't noticed how slow it had become in opening and saving.
Any ideas of where to look in trying to repair my main account? I don't want to have to migrate everything over to the 2nd account. Bridge in the 2nd account doesn't allow me to open all my folders, so I'd prefer not to work totally with a new user account.
PSCS3 10.0.1
Mac 2GHZ dual 4.5 gig ram
10 gig external scratch disk - PS running at 71%
Mac OS X.4.11
A day without Photoshop is like a day without sunshine ...
Thanks

A forced quit WILL create corruption.
An Archive and Install of the OS will give you a fresh system in your regular account while preserving your settings. Should take you less than 45 minutes.
But you may want to try deleting your Photoshop preferences and running the 10.4.11 update over your existing 10.4.11 system first. That may work too, and it would be faster.

Photoshop CS3 Freezes When Opening/Creating New Files

My System: Mac OSX 10.5.8, 2.1GHZ Intel Core 2 Duo, 1 GB 667 MHz DDR2 SDRAM
My Problem:
It seems to be that if I download print drivers Photoshop will freeze anytime I want to open or create a new file. This problem arose when I downloaded a new print driver (unfortunately after deleting several others to ensure the problem was fixed). I was able to delete the print driver resolving this issue, but now it seems to be that anytime I download a new print driver, even though these previous print drivers had been on my computer before it freezes PS again. These previous drivers had worked perfectly fine when I had PS on my system before and I can't understand why all of the sudden now PS won't work with them.

Because of a bug in the printer drivers.
Photoshop asks for basic information ("name of printer", "default page size", etc.) when creating a document.
If the printer driver has serious bugs, then it may hang or crash at this point.

DW CS3 crashes when opening one particular file

I'm using DW CS3 on Mac OSX. I have a huge website built in php. Today after making minor changes to a page, adding one recordset, DW crashes every time I try to open just that page. Everything else is working okay. Can that page be corrupt? Cause?

It also applies to multiples of 8192 bytes.
BTW, you should log into the Web forum and edit your last reply to remove your email address before the spambot email harvestors pick it up. You'll also want to be careful of that when replying by email.
Mark A. Boyd
Keep-On-Learnin' :-)
This message was processed and edited by Jive.
It shall not be considered an accurate representation of my words.

Quicktime quits when opening any m4v file

found simular problems, none of the solutions worked.
any ideas?
qt 10.2
os 10.8.4
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.4 GHz
Number of Processors:          2
Total Number of Cores:          8
L2 Cache (per Core):          256 KB
L3 Cache (per Processor):          12 MB
Memory:          18 GB
Process:         QuickTime Player [1430]
Path:            /Applications/QuickTime Player.app/Contents/MacOS/QuickTime Player
Identifier:      com.apple.QuickTimePlayerX
Version:         10.2 (603.17)
Build Info:      QuickTimePlayerX-603017000000000~5
Code Type:       X86-64 (Native)
Parent Process: launchd [150]
User ID:         501
Date/Time:       2013-08-22 20:12:07.543 -0700
OS Version:      Mac OS X 10.8.4 (12E55)
Report Version: 10
Interval Since Last Report:          62106 sec
Per-App Interval Since Last Report: 2913 sec
Per-App Crashes Since Last Report:   12
Anonymous UUID:                      4B433519-3610-6EE1-E9C0-B48A7C11C516
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_BAD_ACCESS (SIGSEGV)
Exception Codes: KERN_INVALID_ADDRESS at 0x0000000000000000
VM Regions Near 0:
-->
    __TEXT                 0000000106c8d000-0000000106eea000 [ 2420K] r-x/rwx SM=COW /Applications/QuickTime Player.app/Contents/MacOS/QuickTime Player
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.apple.CoreFoundation                0x00007fff8caefbb2 CFDictionaryGetValue + 18
1   com.apple.QTKit                         0x00007fff932a

The files I'm most concerned with playing are my animations exported from Final Cut and from another system's quicktime. These usually are quicktimes or .wma's that are either uncompressed or with a variety of compression, usually DV-NTSC, H.264, HDV 1080 60i, or mpeg4 for the web. But as I've professed before, it seem that the file type isn't necessarily factor. Any video file that should play in Quicktime does not and the program crashes. Upon this I get a very vague error message which reads "Quicktime Player has encountered a problem and needs to close. We are sorry for the inconvenience." That unfortunately is as much detail as I can give at the moment. I know this is a vague problem and that my information is just as vague, but that is all I have gathered. Anything is appreciated.

Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?

Hi. I was trying to open some pdf files and got a message my adobe reader was deinstalled. I installed a new version of Adobe Reader for Mac and when trying to open a PDF file I am getting a message in a foreign language. Any suggestions?

Are you launching Pages from an icon in your Dock? Installing the update does not change the Dock icons & it does not remove the older versions. Go to your Applications folder & launch the new Pages from there.

Dreamweaver CS3 quits when opening some .aspx files

Similar Messages

Maybe you are looking for