Dreamweaver CS3 Remote files not visible
Hello,
I have a problem with DW CS3. When I click on remote view, I
cannot see my files. I can connect via Filezilla, and I can log
onto the remote server control panel and all of the files are
there. The site is working fine. When I try "preview in browser"
command, I get a page cannot be found error. Afterward, there is a
folder visible in remote panel with the temp file in it. Here is
what I have tried so far:
Deleted the site in site management panel and set up again as
new site.
Toggled passive FTP, same problem either way.
Everything was working fine until this week when I started
having problems getting DW to connect via ftp. The connection
became intermittent, then seemed to die. Now when I use the site
management panel to test the connections, they work fine, but I
can't see the files.
I have not recently installed or changed any software on my
PC.
I am using Win XP
Any ideas?
Please tell us the following:
1. Do you have a Testing server defined? If so, what are the
field
contents on that page?
2. When you connect to the site and then expand the Files
panel, which
server icon at the top is selected? Is it the one with the
lightning bolt?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"jackhmr" <[email protected]> wrote in
message
news:gmcgk7$ihr$[email protected]..
> Hello,
> I have a problem with DW CS3. When I click on remote
view, I cannot see my
> files. I can connect via Filezilla, and I can log onto
the remote server
> control panel and all of the files are there. The site
is working fine.
> When I
> try "preview in browser" command, I get a page cannot be
found error.
> Afterward, there is a folder visible in remote panel
with the temp file in
> it.
> Here is what I have tried so far:
> Deleted the site in site management panel and set up
again as new site.
> Toggled passive FTP, same problem either way.
>
> Everything was working fine until this week when I
started having problems
> getting DW to connect via ftp. The connection became
intermittent, then
> seemed
> to die. Now when I use the site management panel to test
the connections,
> they
> work fine, but I can't see the files.
>
> I have not recently installed or changed any software on
my PC.
> I am using Win XP
> Any ideas?
>
Similar Messages
-
CS3 Postscript fonts not visible when Installed with Suitcase 11.0 Vista Ult64
CS3 Postscript fonts not visible when Installed with Suitcase 11.0 on Vista Ultimate 64bit.
Truetype and Opentype work fine. I have searched through all the forums here multiple times, but not found a solution. The only workaround I found was to manually put the font files in c:/ProgramFiles(x86)/CommonFiles/Adobe/Fonts.
When I put any font files in that folder, they show up in CS3 for use, but not in windows apps. I thought I would make a permanent work around by placing all of my uninstalled font files in that folder, then use suitcase to install them from there. That didn't work because EVERY font in that folder is available to CS3 and turned on. Do they get installed when you put them in there?? It didn't seem like they were installed, and windows apps didn't see them.
These are workarounds anyway. My main goal is to have suitcase work so I can organize my fonts efficiently. Extensis blames the font and CS3. I have read that there are adobe issues with other font management software as well as suitcase. Any help would be appreciated.Got mine FIXED here is what i did:
Windows 7 64bit SP1, CS 5
Postscript fonts (comprising of *.pfb + *.pfm files) did not show up in any CS5 app, but showed OK in Word, Excel, Notepad etc.
Tried activating through Suitcase Fusion 2 and also through FontExpert 2009 - but neither of them made the fonts visible in CS5 apps
1) open Start Menu/Control Panel/Fonts
2) on the sidebar there is "Font settings" item
3) set the settings as i did
[ ] Hide fonts based on language settings
[ x ] Allow fonts to be installed using a shortcut (advanced)
FIXED mine,
now i can use Suitcase Fusion 2 to install any PFB/PFM fonts without any problems...
PLEASE IF THIS WORKED FOR YOU TOO, LEAVE A MESSAGE HERE SO OTHERS KNOW IF THIS FIX IS 100% WORKING -
Dreamweaver CS3 Remote View file display
Specs:
Dreamweaver CS3 on Windows XP Pro SP2.
Upgraded from DreamWeaver MX
1680 x 1050 60Hz resolution on vertical display LCD panel
with the monitor turned/displayed verticle so I can view more of
our site tree.
Problem:
When viewing files in split panel display (Remote Site on the
left, Local Files on the right) my Remote Site display will
collapse upward...hiding files from view, but they are actually
still there: I can click Refresh and the tree expands again: After
several seconds or sometimes immediately portions of the
folders/files will collapse/hide again.
It will do this to files I have selected. It will hide files
I have checked out. The worst of it is that sometimes files will
hide or collapse within sub-folders..giving the appearance that
files are stored in incorrect folders.
Thank you for your timeCan you explain the symptoms in more detail? Mixing the use
of DW8 with
DWCS3 would not make remote files appear and disappear.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"shimmerdark" <[email protected]> wrote in
message
news:fs91gm$dea$[email protected]..
> Having the same problem with our company website. It
seems that files
> randomly
> disappear and reappear when they feel like it. Not sure
if it is a FTP
> issue or
> something else. I am the only one in our organization
that is currently
> using
> dream weaver cs3. Everyone else is still use DW8.
> -
Dreamweaver CS3 Menu's not working
Using shortcuts or even manually clicking on the menu items
to say "Put" a file, it just doesn't work. I don't get it. It
worked fine... then (if memory serves me) when I downloaded a CS3
update to all my cs3 applications, it stopped working.
Any ideas what this is and how to fix it, besides
uninstalling the update?
JPAre you working from a site definition? Can you connect to
the remote site?
Can you GET files from it? Does this happen with all your
sites? Does this
site have a testing server defined?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"joshperkins40207" <[email protected]> wrote
in message
news:f4ndd2$8vq$[email protected]..
>I don't know what I'm saying. Bottomline, some menus are
not working. I'm
>on
> a mac.
>
> CMD+SHIFT+U should upload (put) a file. It doesn't work.
Well before you
> think I changed my shortcuts, going to the menu and
choosing SITE > PUT
> doesn't
> work either.
>
> A couple other things like right clicking on the Files
area to "add a
> folder"
> or "create a file" doesn't work. I click it... nothing
happens.
>
> Dreamweaver CS3 is the only software I am having this
problem with.
> -
Dreamweaver cs3 FTP Fault - Not connecting anymore
Hi,
I hope someone may know the cause of this wierd problem
My dreamweaver cs3 has just stopped connecting to server for
any of my sites
(i got over 100 sites and tried quite a few).
My other ftp program external to cwcs3 is fine and continues
to work. This
using the same connection settings as dwcs3 site profiles.
Nothing has
changed on my dwcs3 profiles but yestarday I had the daylight
saving problem
(and last year) where i had to delete the cache file as per
adobe tech doc.
DW no longer crashing but i think this ftp not connecting is
only since
yesterday.
I have also installed the various windows updates that came
out recently.
The other machines in the office continue to work fine. All
machines import
the same saved profiles, but if i remove the site profile and
reimport it
still dosent connect, but repeating this on another machine
works without a
problem.
All machines in this floor have Vista Business/ CS3 web suite
connecting to
a windows 2003 standard ed server running iis and
iis/microsoft ftp server.
Same result with windows firewall disabled. Only other
security app is NOD
anti-virus, again all machines are the same.
All i get is an error telling me to try passive etc, but i
know this isnt
the fault as the other machines with the same settings are
fine..
here is a copy of the ftp log after trying to connect,
selecting a file, and
selecting put.
< 220 Microsoft FTP Service
> USER mmdftp
< 331 Password required for mmdftp.
> PASS
< 230 User mmdftp logged in.
> PWD
< 257 "/mmdftp" is current directory.
> PWD
< 257 "/mmdftp" is current directory.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> MKD MM_CASETEST4291
< 257 "MM_CASETEST4291" directory created.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> RMD mm_casetest4291
< 250 RMD command successful.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> PWD
< 257 "/mmdftp/carrs-billington.com" is current
directory.
> QUIT
< 221
> CWD
/mmdftp/carrs-billington.com/mmdftp/carrs-billington.com
< 220 Microsoft FTP Service
> USER mmdftp
< 331 Password required for mmdftp.
> PASS
< 230 User mmdftp logged in.
> PWD
< 257 "/mmdftp" is current directory.
> PWD
< 257 "/mmdftp" is current directory.
> CWD /mmdftp/carrs-billington.com
< 250 CWD command successful.
> PWD
< 257 "/mmdftp/carrs-billington.com" is current
directory.
The file "/mmdftp/carrs-billington.com/Company.asp" was
skipped because the
old remote file could not be deleted.If i was that anal about cpu overhead, would i be using
dreamweavers built
in ftp with its feature 100%cpu usage. Even on my core 2
extreme 9000 cpu!!
Thanks for the links, but everything in them has been ruled
out. The issue
is clearly not a setting within dw. Its some sort of windows
firewall
corruption
Even running wf.msc (advanced win firewall config) provides
no clues
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
>> why on earth?? why on earth not!
>
> If you are connecting via a router, wherever you are,
you do not need a
> firewall. Firewalls add overhead to your CPU and can get
in the way of
> other things, unexpectedly.
>
>> What puzzles everyone is why is still happens even
with windows firewall
>> disabled (even not behind any firewall or router wen
tested with usb
>> broadband via vodaphone)
>
> Disabling a firewall is sometimes like disabling Norton
AntiVirus.
> Neither of those will ever see the light of day on my
computers! 8)
>
> Anyhow, you may find this useful -
>
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_14834&sliceId=2
>
http://kb.adobe.com/selfservice/viewContent.do?externalId=tn_19012&sliceId=2
>
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
> ==================
>
>
> "RyGa" <[email protected]> wrote in message
> news:[email protected]...
>> why on earth?? why on earth not!
>>
>> This is a laptop and only sped 60% of its life in
the office. All
>> machines in here are identical an this is the first
problem with this
>> setup in over 4 years out of 23machines. so i doubt
its a security issue.
>>
>> I have also discover renamining the dreamweaver
folder allows dream
>> weaver.exe to function ok. whatever is causing the
problem it is tied to
>> the full path.
>>
>> Our it people have also copied renamed cuteftp to
match the same path/
>> exe name and it too fails to function but renaming
the exe back to its
>> proper cuteftp name allows it to work.
>>
>> What puzzles everyone is why is still happens even
with windows firewall
>> disabled (even not behind any firewall or router wen
tested with usb
>> broadband via vodaphone)
>>
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>> So - you are running Windows Firewall AND a
network firewall? Why on
>>> earth?
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>> ==================
>>>
>>>
>>> "RyGa" <[email protected]> wrote in
message
>>> news:[email protected]...
>>>> Ok, im getting some where with this...
>>>>
>>>> I found this thread
>>>>
http://dreamweaverforum.info/dreamweaver-general/20168-dreamweaver-ftp-suddenly-stops-work ing.html
>>>>
>>>> which had this solution:
>>>>
>>>> The problem was in Windows Firewall, which
did not recognized the
>>>> Dreamweaver on some way even it was removed
from the Windows Firewall
>>>> exceptions.
>>>>
>>>> The solution is a bit tricky:
>>>> 1. Remove the Dreamweaver from the Windows
Firewall Exceptions
>>>> 2. Copy & Paste Dreamweaver.exe on the
Program
>>>> Files\<Macromedia|Adobe>\Dreamweaver\
directory to a new executable
>>>> filename (e.g. Dreamweaver2.exe)
>>>> 3. Run the renamed program. After the first
FTP connection Windows
>>>> Firewall will ask for permissions for
connection
>>>> 4. Close Dreamweaver and run original
executable. SOLUTION: Windows
>>>> Firewall will ask for the permision.
>>>> 5. Remove Dreamweaver2.exe from WF
Exceptions
>>>> 6. Enjoy developing and uploading new sites
>>>>
>>>>
>>>> Now as i said previously, I have tried
disabling the windows firewall
>>>> but to no avail. but however, renaming (and
coping to a different exe
>>>> name) the dreamweaver.exe file allows me to
launch the newly named file
>>>> and ftp works fine.
>>>>
>>>> But following the solution above makes no
difference if i run the
>>>> original exe, I dont get to re-add to
firewall exceptions even though
>>>> it isnt there anymore, and the dw still
refuses to play ftp.
>>>>
>>>> I think this is a corruption of some sort
with windows firewall.
>>>>
>>>> Id like to get to the bottom of it though,
because after googling for a
>>>> while i see lots of others are having the
exact same issue. Even if the
>>>> problem is windows firewall related and dw
is innocent in all this, its
>>>> still good to have a solution for anyone
else to follow.
>>>>
>>>> I dont think leaving the dreamweaver.exe
called dreamweaver2.exe is it
>>>> as this breaks all the current registry
references to the proper file
>>>> name.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\Services\SharedAccess\Parameters\FirewallPolicy\F irewallRules
>>>>
>>>> "Dooza" <[email protected]> wrote
in message
>>>> news:[email protected]...
>>>>> RyGa wrote:
>>>>>> I should have mentioned. Last night
i took my laptop home as i do
>>>>>> quite frequesntly.
>>>>>>
>>>>>> The problem remains even though in a
completely different
>>>>>> environment, so that rules out
network at work.. I even tried
>>>>>> disabling all security apps (win
firewall, nod and even that win
>>>>>> defender)
>>>>>>
>>>>>> My cuteftp using the same login
credentials (exactly the same)
>>>>>> continues to work without a problem.
>>>>>>
>>>>>>
>>>>>> I have this morning went through the
site area of the dreamwaever
>>>>>> options and double checked they are
the same as the machine nearest
>>>>>> me and they are.
>>>>>>
>>>>>> still no joy..
>>>>>
>>>>> Very odd indeed, maybe backup all the
site files and re-install
>>>>> Dreamweaver? Its a last ditch effort
though, as its a very strange
>>>>> problem.
>>>>>
>>>>> Dooza
>>>>
>>>
> -
During any "Put" operation I am
usually getting a failure for some or all the files I am
trying to upload.
When this happens the progress bar zips through, regenerates
and then progresses very slowly on the same file. The log records
the error "
The file "documentname.html" was skipped because the old remote
file could not be deleted".
Often I can immediately try again and it works. Sometimes I
have to retry several times.
This started suddenly (no system changes that I am aware of)
during the fall (2007). It's happening on ftp accounts for several
hosting providers so the common element seems to be DW CS3.
Any thoughts, folks?I have had these issues before they just solved themselves
eventually. Why this happends? I have no idea.
Try another FTP program or use the hosting services Control
Panel to remove the file. Or ask hosting service to do it.
Shane -
Remote Files not showing in files window
DW 8.0.2, WinXP, Ubuntu Linux server, FTP
All was working fine for the past few months and earlier
today. Now, I can connect via FTP to my Ubuntu web server but the
remote files are not showing up and thus synchronization is not
working (I can PUT, but not GET). Everything shows up fine in
Filezilla. DW FTP log shows activity, including listing the
folders, but still nothing shows in the remote view. AFAIK, nothing
on the server changed (I asked) and this happened while working in
DW...one minute all is fine, the next it was not working.
Because sync stopped working (it wants to upload ALL files
ALL the time because it does not see Remote files) I tried the
troubleshooting thing of disabling sync, exiting, restarting,
enabling sync, attempting a sync, etc, but now the xml file (in
_notes folder) will not come back. What ths heck is going on?!?
So far I've tried:
- Exit and restart DW
- Reboot PC
- Restart FTP service (though I doubt that's the problem
since it works fine with Filezilla)
- The troublshooting for sync issues
- Re-install 8.0.2 update (can't reinstall all of DW right
now because the disks are at home)
- Creating a new site
- Mucking with the FTP settings (currently using passive FTP
with sync turned on...all other setting are the usual)
I plan to try a reinstall of DW tonight. Any help is
appreciated!Wow...not a single response. Anyway, problem solved. Turns
out a server restart restored the remote view. This was after an
FTP service restart did not fix it. Weird in any case because
"regular" FTP worked fine, just not in Dreamweaver. -
DW cs3 help files not installed
DW CS3 F1 does not work. . . files not installed. Am I
missing something? I began to reinstall dw but did not see a custom
or options so I backed out. Any ideas?Not suite...I installed DW CD only and all its apps. like
Bridge etc.
I press F1 and I do get the help viewer, but it says files
not available, and I searched *.chm files only found xmxml.chm or
something like that (sorry not at that PC now).
I am not squeemish about installing software, but with adobe
I am extremely cautious. My last resort is to
deactivate/un-register license and reinstall.
quote:
Originally posted by:
Newsgroup User
Did you install just Dreamweaver or the whole CS3 Suite? I
can't say .. F1
opens the Adobe Help Viewer 1.1 for me with Dreamweaver
selected.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"iigman" <[email protected]> wrote in
message
news:fn6gml$25i$[email protected]..
> DW CS3 F1 does not work. . . files not installed. Am I
missing something?
> I began to reinstall dw but did not see a custom or
options so I backed
> out. Any ideas? -
I use Dreamweaver (8.0.2) which I have been using for several
years without incident. Now, I am unable to see my remote files.
When I click on the icon that connects to the remote host (or when
I right click "Put" the file to upload to the remote server), the
background file activity bar appears with the message "Retrieving
remote folder for <site>" It takes longer than usual, about
20 seconds longer. When it finishes, "File activity complete," the
directory (folder) of the site contents appear in the remote site
window, but when I click on it to view the site files, nothing
happens.
Now I am unable to update or see my files on the remote
server via DW.
I manage about 8 files via DW and the same thing happens with
all of them. I have not changed the FTP configuration settings for
any of them.
Do you know what is going on and how do I fix this problem?
AmyAre you sure you are connecting to the proper folder level on
the remote
host site?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"sitedeveloper" <[email protected]> wrote in
message
news:g30lt6$91f$[email protected]..
>I use Dreamweaver (8.0.2) which I have been using for
several years without
> incident. Now, I am unable to see my remote files. When
I click on the
> icon
> that connects to the remote host (or when I right click
"Put" the file to
> upload to the remote server), the background file
activity bar appears
> with the
> message "Retrieving remote folder for <site>" It
takes longer than usual,
> about 20 seconds longer. When it finishes, "File
activity complete," the
> directory (folder) of the site contents appear in the
remote site window,
> but
> when I click on it to view the site files, nothing
happens.
>
> Now I am unable to update or see my files on the remote
server via DW.
>
> I manage about 8 files via DW and the same thing happens
with all of them.
> I
> have not changed the FTP configuration settings for any
of them.
>
> Do you know what is going on and how do I fix this
problem?
>
> Amy
> -
Dreamweaver CS3 preference file location
Dreamweaver CS3 was not able to be shut down on a Macintosh,
and the computer was powered down.
Now Dreamweaver does not have any of the site information in
Manage Sites (the window is blank).
There is a Time Machine backup (OS 10.5) we can restore, but
where is the Manage Sites preference info stored? Or it could be
the info in the Files palette we need to restore, I'm not sure
(it's someone else's computer, who had about 15 sites configured
through Dreamweaver)./HardDrive/Users/username/Library/Application
Support/Adobe/Common/9/Sites/Site Prefs
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Why are shared files not visible when iPhone4S connected to iTunes?
What makes this problem mysterious is that I have exactly the same settings on the same or eqivalent Apps on iPad2 and iTunes4S but when my iPhone is connected to my iTunes (running on my PC under Win7) it shows no files on Apps like Pages, iBooks, Keynote, and Print-n-share. Each of these Apps has files and each shows files when I connect my iPad2. I cannot export or import filesto/from itunes and iphone because the list of files inside the Apps is not visible in itunes.
PS I CAN, btw, export and import files by using the amazing App and service "DropBox" which is the only route in and out of my iPhone (I am not ready to use iCloud).This is not a reply but an addition. While searching for answers as to why "Shared" files in original Apps in my iPhone4S did not appear on itunes I came across a similar discussion on another Forum in which Jim described in some detail how to get the two devices (my iPhone 4S and my iPad2) to recognize similar embedded files in similar Apps. https://discussions.apple.com/message/16690584#16690584
I went through this promising procedure but it did not help. Since the two devices are independent (I think -- they are on the same accoubt but ar different devices) I should be able to make them work the same way with regard to what is seem in iTune. -
Airport Extreme files not visible on USB drive.
Airport Extreme files on Toshiba USB powered drive not visible through Windows. I disabled antivirus with no change. If I copy files onto it they go but then disappear. If I copy again it asks if I wish to overwrite the file as its already on the drive I just can't see them there. I tried another computer, also Windows 7, on our network with the same results. It is formatted as Fat32 and is recognized by the Airport. It is a 1TB size drive.
double post.
-
SQL Developer export files not visible
Hi All,
I've started using SQL Developer recently and I am completely new to this tool.
I've noticed a weird problem. All the export files and the folders I create from SQL Developer is not visible from the normal windows. Say I've executed a query and I need to export the output to a file. I right-click on the data grid; select Export Data -> xls/csv (anything) . I get a pop to mention the Location of the file. I click on Browse ; then select the location and then click on apply. I expect the file to be created. But when I go to that folder; I do not find any files.
To add on to my suprise; If i click on open a file and navigate to the above mentioned path; the pop-up shows that the file is present in that folder. But it is not visible from Windows. This is of no use as I cannot use those files.
BTW; version is 2.1.1.64
Note: I've also enabled the option of viewing all hidden files and folders in Windows.
Regards,
ArunHi Arun,
If you are using Windows Vista, Windows 7, or higher, and writing to a directory (like C:\, C:\Windows\, C:\Program Files\) that Microsoft wishes to protect from malware or just simple clutter , then you are running afoul of a redirect feature in the OS that puts the unwanted file in a VirtualStore folder for your user name, specifically:
C:\Users\<yourusername>\AppData\Local\VirtualStore\<full path where you think the file got stored>See the following for details:
http://answers.microsoft.com/en-us/windows/forum/windows_7-files/folder-redirect-in-windows-7/95218744-37e6-40cd-b890-2e647351df16
I just ran across this myself for the case of C:\ and perhaps this applies to your situation also.
Regards,
Gary -
DNG files not visible in Lightroom 2.5
I've installled Lightroom 2.5 in my old desktop (Pentium 4, 1 GB RAM, Windows XP Home SP 3). After I've imported my camera RAW (NEF) images into Lightroom as DNG, I can see the photo info but photos are not visible.How can I make them visible?
I wonder if you have been using sidecars, as I had assumed. Maybe you've got a metadata template? "XMP files" norrmally refers to sidecars, but could refer to templates too. So which is it? How exactly have you been assigning this file to images in Photoshop? I don't know the detail of Photo Mechanic, though I'm betting your friend has been applying a template. If you do this first, you can then use that Read metadata technique. Once you've done that once, in LR you can save the metadata as a preset, or sync it to other images. Sadly LR can't read metadata templates directly.
-
TS1493 files not visible on ipod nano after disconnect from itunes
I have an iPod Nano (6th generation - 16 Gb) which was purchased in early 2011. All of a sudden all files in all categories (music, audiobooks, podcasts, etc) are no longer visible once it is disconnected from iTunes on my laptop. When reconnected to the laptop the files are visible again in iTunes - so they are still on the device. I have searched the Apple online support info and that only seems to provide complicated and unhelpful information about redesigating hard drive network maps etc., which is an action I am not prepared to risk for fear of making a bad problem worse, or contacting my "administrator" - which is me! Can anyone offer any solutions that don't require a PhD in computer science?
Here are a couple of additional pieces of information that might provide a clue:
1) At home, my iPod shows up as having the name I used when I registered it. On the second computer, my iPod shows up with the name DATA1.
2) I have an iPod 4GB mini. At home, that's pretty much the amount of space that shows up in the disk space bar (near the bottom) of iTunes. However, on the second PC, the disk space bar shows 10.35 GB used, 15.66 GB free! Which is just freaky, since it's still a 4GB iPod mini.
3) According to the iTunes display, everything is transferring absolutely smoothly. Since the iPod is configured to transfer music manually, the Do Not Disconnect sign is flashing throughout, but when I'm done and click on the eject iPod button in the lower right hand corner, it turns off, just the way it's supposed to and I can disconnect my iPod. It's just that my songs aren't visible anywhere on my iPod when I try then to play them.
Maybe you are looking for
-
Computer no longer works with burnt CDs
My computer no longer burns CDs, nor will it read any CDs burnt by any other computer. It just tells me iv'e inserted a blank CD. Any suggestions?
-
How to find out the storage category
Hi all, I am currently working on archiving some of our DMS documents. We are doing this by moving the docs that meet the criteria to a different storage category on a different server. I would like to quickly establish how many docs we have archived
-
Imessage won't send, nor receive! Need help quick
I contacted apple and they told me to call sprint and have the re store the settings or something along those lines. I've tried everything from hard resetting to turning wifi on and off. I need help quick nothing is working and I need to stay in touc
-
Hi All,, I am generating one file on unix server using Open dataset statement. I want to move that file from UNIX server to some other server (windows server). How i can proceed? Is it possible to generate the file directly on the
-
Gigabit x non-Gigabit Ethernet Switch
Dear members: I've looked at a few models of Ethernet switches to connect my computers to (a Windows PC, a Powerbook G4 17" and a Powermac G5) but have been confronted with a choice. Some models are called "Gigabit" and others aren't. It apparently h