Dreamweaver CS3 Uploading Problem
Cannot upload my first Web Page to the Web Site (Host). I
have tested and have received the following message:
"Adobe Dreamweaver CS3 connected to your Web Server
successfully."
When I PUT Index.html from Local to Remote, I receive the
following error message: "Index.html - error occurred - An FTP
error occurred - cannot put Index.html. Access denied.
I have invested too much dough for a WW2 non-profit
organization for this not to work.
Thanks in advance.
I tried enabling passive FTP but it doesn't help.
Similar Messages
-
Dreamweaver CS3 Installation Problems
Hello,
I have just got Dreamweaver CS3 and Photoshop CS3 and have
had some real issues with installing them! Here is my situation
explained.
I first installed Dreamweaver CS3 after un-installing a
previous version of Dreamweaver (the one from Macromedia) and it
installed as normal. I then tried to install Photoshop but it only
got as far as 8.46% and would go no further! I did a system restore
and tried installing Photoshop before Dreamweaver and it installed!
I then tried to install Dreamweaver but once the "Adobe Setup" got
to 100% it disappeared and the Installation screen did not appear,
in fact nothing happened! I went in an endless loop of installing
one before the other and have landed and having Photoshop on the
computer and not been able to install Dreamweaver! As I mentioned,
if I don't have Photoshop installed, Dreamweaver will install and
vice-versa.
I'm thinking it is a conflict problem, but I dunno where to
begin looking. I've cleared the computer of useless files and
registry entries (I use a program called CCleaner) and I also went
into
C:\Program Files\Common Files\Adobe and did a search for
'dreamweaver' and deleted everything that came up, just so it'd be
like Dreamweaver was never installed.
I used the CS3 Cleaner because I previously had the PS BETA
but it never worked right and it kept failing when deleting stuff,
so I dunno why that was.
If anyone knows any reason why this is doing it and have any
ways of helping me out, I would be greatly appreciated. Thanks
P.S. I am on Windows Vista Home PremiumYou may experiencing the same problem that I had. If you had
a previous Beta installation installed, it may be preventing the
new installation.
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=kb401090
quote:
Originally posted by:
joeh75
I upgraded to Photoshop CS and spent four hours with Adobe
tech support (valiant attempts). They told me I should call
Microsoft. Microsoft shuttled me to Dell. Dell told me they could
fix the problem with Windows Installer on my XP Pro system for
$245.
Symptom is that the Photoshop installation gets as far as a
screen that says "Loading Setup," blinks, then goes away. I
re-installed the Windows Installer and the Photoshop install still
fails.
Any help appreciated...
Thanks/Joe -
Hi,
I am unable to connect to my remote server using my new copy
of Adobe Dreamweaver CS3
When I test the FTP connection I get an error message
I can connect without problems to my remote server using
Microsoft Frontpage and the exact same FTP address, login, and
password - so it is not the server which is at fault
Things I have tried without success
My hosting company told me to either leave the host directory
box blank or put a / in it. Neither of these options work
I have tried retyping my login details carefully.
I have tried checking the ‘use passive FTP’ box
I have tried putting a colon and the port number after the
FTP address
I have tried writing the FTP address with and without the
ftp:// symbol
I have tried setting the FTP time out preferences at 60secs,
30 secs, 120 secs, 10 secs, and 5 secs
I am wondering what else to try, and how I can check whether
or not the software is being blocked by a firewall (in Norton for
example - my windows firewall is switched off) as I do remember
getting a message about this during the install. Or would it be a
good idea to uninstall and reinstall the software?
I would be most grateful for any further information or
advice.
Many thanks
Pippa> When I test the FTP connection I get an error message
What is the error message?
Here's my experience.
1. A firewall (any firewall, including but not restricted to
SP2) may be
blocking your attempts. It's best to completely disable them
while you are
troubleshooting this.
2. The FTP host field should usually always be filled in like
this -
''www.domain.com'' (without the quotes) and with NO leading
protocol (e.g.,
http:// or ftp://) (of course, you can always
use the IP address, too).
3. Enabling Passive FTP (usually the default for 3rd party
FTP programs) in
your Remote site definition can often be the gating factor in
a balky FTP
connection.
Make sure you use those guidelines and usually your
connection problem will
be solved.
By the way, if you find that #1 allows the connection to
proceed, then you
have to figure out what it is about your firewall that is
blocking
transmissions. CS3 allows you to fine tune firewall support
via the
Remote site definition, but you may also need to do a very
simple thing of
permitting CS3 to make outgoing connections in the Firewall
configuration.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Pippa Mattinson" <[email protected]> wrote
in message
news:[email protected]...
> Hi,
>
> I am unable to connect to my remote server using my new
copy of Adobe
> Dreamweaver CS3
>
> When I test the FTP connection I get an error message
>
>
> I can connect without problems to my remote server using
Microsoft
> Frontpage
> and the exact same FTP address, login, and password - so
it is not the
> server which is at fault
>
> Things I have tried without success
> My hosting company told me to either leave the host
directory box blank or
> put
> a / in it. Neither of these options work
> I have tried retyping my login details carefully.
> I have tried checking the ?use passive FTP? box
> I have tried putting a colon and the port number after
the FTP address
> I have tried writing the FTP address with and without
the ftp:// symbol
> I have tried setting the FTP time out preferences at
60secs, 30 secs, 120
> secs, 10 secs, and 5 secs
>
> I am wondering what else to try, and how I can check
whether or not the
> software is being blocked by a firewall (in Norton for
example - my
> windows
> firewall is switched off) as I do remember getting a
message about this
> during
> the install. Or would it be a good idea to uninstall and
reinstall the
> software?
> I would be most grateful for any further information or
advice.
>
> Many thanks
>
> Pippa
> -
Good day, I am having problems using my new version of CS3.
When I am working in split view, or design view for that matter,
any css that I add to the page does not show up when designing the
page. Whether it is inline or attached, I don't see the changes to
the page while working on it. Is there something I need to adjust
in my properties to make this work? I have not had this problem in
Dreamweaver MX 2004. Any and all help would be so helpful. Thank
you in advance.
RobHi SnakeEyez, thank you for a prompt reply. I do not have the
page uploaded as I just started working with it. I don't understand
how it would be a code problem if Dreamweaver is adding the code
for me. For example, when I add
<style type="text/css">
<!--
body {
background-color: #003333;
-->
</style>
the page is still white when designing. Any ideas why this
is? Thanks. -
Dreamweaver CS3/Flash problem
Hi everyone, I recently upgraded to Dreaweaver CS3 from 2004
MX. However, I'm having a problem trying to display a Flash banner
on my website.
My site is www.flaccidsacks.co.uk, you'll notice on the index
page the Flash banner at the top.
However, I updated a couple of pages, and you'll see if you
click on "Record Labels" that the Flash banner doesn't appear. The
source doesn't even appear to have the name of the Flash file.
However, in the Dreamweaver design panel the Flash file is in
the correct position, and it appears fine when I preview it. It
seems though that Dreamweaver is doing something when I publish the
page that's preventing the Flash banner from appearing.
I would be very grateful for anyone who can spare a minute to
help me.
Thanks
Lyle> Additionally, when I opened the pages to update,
Dreamweaver asked if I
> wanted
> to covert <object> tags to browser safe scripts,
which I said 'yes' to,
> although I didn't really understand what the problem
was.
When you clicked "yes" a folder named Scripts was generated
in your files.
Upload that folder to the server.
Regards,
Adriana.
[ put out the rubbish if you need to reach me by e-mail ]
www.spinsister.nl -
This topic may have been mentioned before, but cannot find
anythinf for it. I have used several versions of Dreamweaver and
had no problem updating to web sites. Since I've updated to the CS3
version, whatever web site I am working on, or varying hosting
companies, it always misses pages or files that I've been working
on. It will go through the whole site, telling me which ones are
needed to be uploaded, but will always miss some or all that I have
just edited.
I've noticed that I can edit a file say 12/02/2008 11.03am.
Upload it manually and find that on (any) of my hosting sites that
it's modifed date/time will be 12/02/2008 7.03pm. 8 hours ahead.
Has anyone else had any similar experiences?
Many thanks,
Alan.This topic may have been mentioned before, but cannot find
anythinf for it. I have used several versions of Dreamweaver and
had no problem updating to web sites. Since I've updated to the CS3
version, whatever web site I am working on, or varying hosting
companies, it always misses pages or files that I've been working
on. It will go through the whole site, telling me which ones are
needed to be uploaded, but will always miss some or all that I have
just edited.
I've noticed that I can edit a file say 12/02/2008 11.03am.
Upload it manually and find that on (any) of my hosting sites that
it's modifed date/time will be 12/02/2008 7.03pm. 8 hours ahead.
Has anyone else had any similar experiences?
Many thanks,
Alan. -
Dreamweaver site upload problem
I created a site using templates and unfortunately my website is in nested folders and the Template folder was automatically created at the root, so on my host I need to upload my site to my folder root. My site is defined as either a number<blue<html or a number as the root. Unfortunately if I define it as number<blue<html the Templates file gets lost and all my pages have broken links and don't display correctly. I tried copying the Template folder to this directory but it was a mess. I tried copying the number<blue<html directory to the root where the templates are a mess again.
The site is fine on my computer with the right paths, but the minute I upload it either to the number to root, or number<blue<html the templates cease to function and some of my images disappeared. I have to confess, I was panicked and uploaded the site about 5 times with different configurations, puting the previous upload in a folder on the host.
Somehow a templates folder appeared in the number<blue<html directory and all of the pages did not display correctly on my computer until I moved it out to the Desktop. Needless to say, I was new to Templates and made about 20 with many dependencies and updating is also a mess. Should I start over with new templates in the root directory? Will the Templates function there? Please help me, I had to put up the old site while I sort this out. Thank you very muchHi,
The path to the Dreamweaver Template folder is root (templates)/blue/html/site files. I may have another problem. When I went back to the original site a large number of my templates were corrupted and image files missing.
I will have to re-create the templates and then my pages to solve the problem. This time I will use 3 instead of 12 hopelessly nested ones. If the templates don't have to be uploaded then ther shouldn't have been a problem, but when I uploaded it the first time it created a templates folder in the root and I think this is when I think my pages didn't work.
Anyway, thank you very much for the help -
Dreamweave cs3 install problem
Currently running DW8 on Windows Vista, I thought I would
have a look at CS3. I downloaded the trial version of DW CS3 and
ran it. After extracting the files, the setup starts ('Initializing
Adobe setup') but then immediately disappears with no messages.
I've tried running as Administrator but the same happens.
A search for a fix has turned up nothing so far. Any ideas
from anyone would be welcomed.
Colin.type the exact error you get into google and see what pops
up. Have you preciously had another version of dreamweaver on your
computer and it was uninstalled by chance? Maybe email adobes
support and let them know. But I am sure someone else has gotten
this error before so if you search google Im sure you will find
your answer. I just downloaded the trial also and didnt get that
message. Google is the best for answers.. -
Dreamweaver CS3 install problem
I have this problem
I downloaded the trial today (27/06/2007) and begin the
instalation process
It starts installing, the "LOADING SETUP" screen appears for
a few seconds and then it closes and nothing else happens
I don't know what to do to solve this problem and complete
the installation process, anyone has an idea to solve this problem?
Never installed the BETA version
ThanksHave a look at these technotes to see if there's anything
there that may
help:
http://www.adobe.com/go/kb401401
http://www.adobe.com/go/tn_15296
Nadia
Adobe® Community Expert : Dreamweaver
CSS Templates |Tutorials |SEO Articles
http://www.DreamweaverResources.com
~ Customisation Service Available ~
http://www.csstemplates.com.au
Spry Widget Examples
http://www.dreamweaverresources.com/spry-widgets/
~ Forum Posting Guidelines ~
http://www.adobe.com/support/forums/guidelines.html
CSS Tutorials for Dreamweaver:
http://www.adobe.com/devnet/dreamweaver/css.html
"Shaka_60hp" <[email protected]> wrote in
message
news:f5ufo3$6j0$[email protected]..
>I have this problem
> I downloaded the trial today (27/06/2007) and begin the
instalation
> process
> It starts installing, the "LOADING SETUP" screen appears
for a few
> seconds
> and then it closes and nothing else happens
> I don't know what to do to solve this problem and
complete the
> installation
> process, anyone has an idea to solve this problem?
> Never installed the BETA version
> Thanks
> -
Adobe Dreamweaver CS3 installation problem
Hi to everyone, i just download trial version for
Dreamweaver, but i can't install it.
My OS is windows vista home premium, and when it finish
install it will appear a box shows that internal error 2739.
Can anyone help me?Thanks.This MAY help - Clean Script to Remove Adobe
http://www.adobe.com/support/contact/cs3clean.html -
Fireworks CS3 and Dreamweaver CS3 (Menu problems)
I am trying to develop buttons in fireworks, import them into Dreamweaver, but for some reason it it cause my menu at the top of the page to expand outward. Take a look here. http://www.gcfa.org/episcopal-revision.html Any help would be great. Thanks in advance.
I figured it out. It was really stupid and to tell you the truth I am not sure what happened. But I fixed it by taken out all of the menu and redoing it.Weird huh! Thanks anyway.
-
Mac OS X and Dreamweaver CS3 Synchronization Problem
Demaweaver does not try to synchronize files located in
expanded subdirectories:
- try to change and then list (click rectangle to expand)
files from one of subdirectories
collapse directory where this subdirectory is located
- try to synchronize collapsed directory
- does not work! (dreamweaver doe not try to put changed
files - check ftp log)
My solution: collapse site with 'alt' key before synchronize
(selecting newer local ...).Okay, now I got tuned sound to the other ear too... but I had to put the balance almost all to the left... and at the same time the max volume is reduced quite a lot even though I put the input volume to Max on system preferences.
-
Dreamweaver CS3 layout problem
So somehow I managed to drag the Tag Inspector panel over to
it's own
seperate panel. It can be seen here:
http://davidgoldmanwebdesign.com/layout.html
Can anyone tell me how the heck to get it back in with the
panels to its
left so I only have one set of panels?
Thanks!
DavidNever mind! Just found the right corner to grab to I could
move it back in!
David G. wrote:
> So somehow I managed to drag the Tag Inspector panel
over to it's own
> seperate panel. It can be seen here:
>
>
http://davidgoldmanwebdesign.com/layout.html
>
> Can anyone tell me how the heck to get it back in with
the panels to its
> left so I only have one set of panels?
>
> Thanks!
>
> David -
Problem uploading files from Dreamweaver CS3 to Yahoo
I am having a problem uploading files from Dreamweaver CS3 to
an FTP site on Yahoo.
The error message I get is "No response from server.
Reconnecting..."
I am able to connect to Yahoo using other FTP clients
successfully.
I am able to connect to Yahoo using Dreamweaver MX 2004
successfully.
I tried playing with various settings (i.e. passive ftp,
server compatibility options) but to no avail.
Any thoughts on this would be appreciated.
Thank you,
StevenI tried enabling passive FTP but it doesn't help.
-
URGENT: Dreamweaver CS3 crashes while uploading any PHP File
Hello,
My Dreamweaver CS3 crashes everytime I try to upload any PHP
file to the Web Server. It does upload the file but crashes and you
received a "Not Responding" error in the Windows title bar. I did
search alot on this issue until I found the ".
Dreamweaver
CS3 crashes after DST ends" problem. I deleted the cache file
as required but of NO HELP.
. It is very annoying to restart Dreamweaver
everytime you want to upload any PHP file to the Web Server after
editing it. It doesn't happen with any other types of files. Please
help me guys here or I will lose my mind.Bad news for you too.
First, you are not addressing Adobe here in the user forums.
Secondly, Adobe does not support CS3 any longer because it hasn't been sold for years.
Therefore, you're left to the good will of fellow users who volunteer their time here free of charge, if one of them has a solution to your issue. No one is under any obligation to reply, so ask nicely.
One thing I can tell you is that you have not applied any of the versions available for Photoshop. Unfortunately, the Adobe auto updater was an unmitigated piece of cr@p in any version prior to CS6. Do not rely on it to assume you are up to date just because it doesn't show any updates available to you under Help > Updates.
You need to look for the downloads and apply them manually yourself.
I can't offer any more assistance because I don't do Windows. Sorry.
Maybe you are looking for
-
How do I stop Google from processing my browser's page access errors?
Whenever I have trouble accessing any web page, I get several "404 Not Found" errors in quick succession followed by a "414 Request-URI Too Large" error from Google. My most recent example of the final URL is :- <u></u><u>== http://google.com.au/cgi/
-
why does my apple id in app store settings show one thing and in the apps it shows a different id (ccl43) no email address) I am unsure what to do I cannot get into my apps account in order to upgrade it. HELP PLEASE!!!!!!
-
Leopard mail.app jpg attachments not viewable
Some PDF and Jpg attachment are not viewable in the message and a blue cube with white question marks appear in both sending, sent and received emails. This is a new phenomenon which started last week.
-
How do I get document from icloud in the Pages app to sync to my ipad?
Ok, so I get the part about not having to sign in to icloud on an ios device, but that still doesn't explain why documents that I have stored in the icloud, itunes, and on my iphone are not automatically syncing to my ipad. When I try to open the Pag
-
BAPI_MATERIAL_SAVEDATA for updating Profit center giving an error message.
Hi All, I have a requirement to update Profit Center in storage view of Material Master. So for updating Profit Center I used BAPI_MATERIAL_SAVEDATA. In this BAPI we will pass Material number, Plant and New Profit center. When I used this it