Dreamweaver CS3 used with CS2?

I currently have the complete CS2 package. I would like to
buy Dreamweaver CS3 but do not know if it would be compatible with
CS2. Any help would be appreciated.

There was no DW CS2.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"SnakEyez02" <[email protected]> wrote in
message
news:g14b5l$gg8$[email protected]..
> Yes you can use one program in CS3 while the rest are
CS2. Some
> functionality
> of sharing between programs may be affected but nothing
else should.
>
> If you have a previous package you can upgrade to a CS3
suite with
> Dreamweaver
> even if you did not own DW before. You can contact Adobe
sales for
> further
> information on this.
>

Similar Messages

  • Slow CS3 compared with CS2

    I'm seeing an overall sluggish performance in inDesign CS3 compared with CS2. I use G5 processors and I have plenty of Ram (8 Gigs on a x2 G5 and (2 Gigs on an iMac) I . Even CS2 running on a G4 PowerBook seems faster. The preview of the images set on Typical makes me think that I have the setting on High Quality, whilst I don't. Images take ages to show up. Seeing the same document open on an Intel machine seems much faster even if has only 2 Gigs of Ram. Is there a problem with G5 Macs and InDesign CS3? Photoshop CS3 works just fine.

    Is it like this with any document? There have not been much complaining of CS3 being slow so it is certainly not a general problem. I have only toyed with the tryout, I am stuck in CS1(!) until fall, but didnt notice any slowdowns in screen redraws on a few magazines I converted.
    You said in a previous post it is like having high res display on, does that mean that they also display in high res or was it just to compare the sluggishness? Placing overly large images and downsizing in Indesign could cause that I think. See what ppi the image are reported to be, actual and effective.
    Are those images on a server or on your local disk? If on a server see if it behaves any better when trying with images placed from you local drive.
    Also try an export to .inx and reopen that with hope of getting rid of any corruption.

  • Does Dreamweaver CS3 work with 64 bit version of Windows 7?

    Windows 7, 64 bit, Home Premium was clean installed.  I had no difficulty reinstalling Dreamweaver CS3, but when I try to open a file I get a message that  says." A problem has caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available."  Apparently none is.  So my question is, does Dreamweaver CS3 work with the 64 bit version of Windows 7?  If not, does CS4 work or would I be wasting money by upgrading?

    I just installed it and ran it fine.  I have Windows 7 Ultimate 64 bit
    Make sure it is a clean install from a fresh "boot".  I ran into problems the first time when I tried to install it right after I installed another program.  I simply uninstalled it.....which took a long long time, but after it was removed and I rebooted, everything went fine.
    Rick

  • Opening CS3 Files With CS2

    I am running iMacs (Leopard). I have CS2 on 1 machine, CS3 on the other.
    When I try to open a CS3 file with CS2, I get a long list of extensions/plug ins that need to be updated.
    Where can I find the updates?
    Thanks.
    Darryl

    I assume you're referring to InDesign (please post application specific
    question in the application forums), you'll need to export as INX and
    open that.
    Don't expect perfection.
    You can search the InDesign forums for INX for more info.
    Bob

  • Dreamweaver CS3 stops, with blank registration screen

    Today I started to work with Dreamweaver CS3 Mac, It opened fine until a registration screen appeared, on top of everything.
    The screen is blank but I remembered that sometimes Dreamweaver asks me to register. I always say: Later!
    But now, I cannot work! The screen is blank and stays on top of everything that is grey highlighted.
    The things I did:
    - deleted cache file
    - delete Configuration map
    - installed Dreamweaver from the CD DVD
    Furthermore I changed my password from my Adobe ID (because of the security flaw there has been)
    I work on a MacBookPro 17" 2006
    10.6.8
    Dreamweaver CS3 NL Creative Suite Web Premium
    Please your advice to fix this problem?
    Greetings
    Geert (NL)

    SOLVED IT
    Looked at a old post :
    3. gortmend,
      Nov 19, 2013 8:57 PM    in reply to AmazonWench 
    Hit the same thing, I found a work around.
    1. Disconnect your internet.
    2. Start CS3
    3. You'll get an error screen, click "never register."
    Hope it works for you.

  • Dreamweaver CS3. problem with installation

    Greetings...
    I have some strange problems with installation of Dreamweaver
    CS3: when I'm running setup -- it shows "initialization" window and
    then shows message that at one time I can install only one adobe
    produc. But there is no unfinished installations...
    Also this setup adds it's button to "Add or remove
    programs"...
    What should I do?
    Best regards...

    >I run the ADBEDRWVCSE_WWE.EXE 292.289 KB
    Where did you get this file?
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "ABK54" <[email protected]> wrote in message
    news:fojl9t$e10$[email protected]..
    >I run the ADBEDRWVCSE_WWE.EXE 292.289 KB (for trial
    version of Dreamweaver
    >CS3)
    > and after I have try to run the Setup.exe file.
    > After 2 sec open a window - preparetion of Adobe
    Dreamweaver CS3 -
    > ,transer
    > some files and open a window Loading setup... in 2 sec
    close this window
    > and
    > after nothing!!!
    >
    > I need your help please
    > tks
    >
    >
    > sorry for the shuting
    >

  • Dreamweaver cs3 problem with leopard

    Dreamweaver CS3 is much slower with Leopard. And I have trouble uploading pics to remote site. Anyone got a solution?

    If there is a solution, you'd probably find it on the Adobe forums:
    http://www.adobe.com/support/forums

  • Dreamweaver CS3 Reinstall with no disc :s

    I'm not sure how it happened, but I can't seem to find my
    disc for my copy of Dreamweaver CS3.
    I went to install it onto my laptop but I opened the box and
    there was no disc. I have a legal serial number, but everywhere I
    look there's only downloads for CS4 and none for CS3.
    Anyone have any ideas? :( I only need the installer
    portion...

    Grab just about any book on Dreamweaver CS3. They almost
    always come with a disc that includes the 30-day trial. When
    prompted for the serial number enter your own and you're good to
    go.

  • Dreamweaver CS3 bug with templates?

    Hello,
    I am having a very major problem with a template. I am on
    Dreamweaver CS3 and my template has been created in Dreamweaver 8
    and it says in parenthesis (xhtml) - even though all my pages from
    the template are html.
    When I now make even the most minor change (even adding one
    single letter) to my template or when I try to create a new page
    from that template, the resulting pages have missing images (my
    whole top banner), but the actual template looks perfect. You can
    actually seean example of a page on a test website at
    http://ww2.itrak.com/iTRAKnouveau/
    I seem to remember I actually had this problem once before
    and I did not have it in Dreamweaver 8 but I am not sure of my
    recollection.
    Unfortunately, this time I cannot access Dreamweaver 8
    anymore... I am really hoping someone can solve this one with me!!
    Christine

    nope
    Jo
    "Murray *ACE*" <[email protected]> wrote
    in message
    news:[email protected]...
    > Sounds like it's not a DW problem after all....
    >
    > --
    > Murray --- ICQ 71997575
    > Adobe Community Expert
    > (If you *MUST* email me, don't LAUGH when you do so!)
    > ==================
    >
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    > ==================
    >
    >
    > "josie1one" <[email protected]> wrote in
    message
    > news:[email protected]...
    >> There's this:
    >>
    >> body {
    >> background-color: #d3d5d6;
    >> margin-top: 0px;
    >> background-image: url(); <----------- no image
    defined
    >> background-repeat: repeat-x;
    >>
    >> and
    >>
    http://ww2.itrak.com/iTRAKnouveau/images/header_print.jpg
    >>
    http://ww2.itrak.com/iTRAKnouveau/images/header_itrack_4_01.jpg
    through
    >> to 4_24 don't appear to be on the server - Not
    Found. Can you check your
    >> site definition?
    >>
    >> --
    >> Jo
    >>
    >>
    >>
    >>
    >> "Strateege Health"
    <[email protected]> wrote in message
    >> news:[email protected]...
    >>> Hello,
    >>> I am having a very major problem with a
    template. I am on Dreamweaver
    >>> CS3 and
    >>> my template has been created in Dreamweaver 8
    and it says in parenthesis
    >>> (xhtml) - even though all my pages from the
    template are html.
    >>> When I now make even the most minor change (even
    adding one single
    >>> letter) to
    >>> my template or when I try to create a new page
    from that template, the
    >>> resulting pages have missing images (my whole
    top banner), but the
    >>> actual
    >>> template looks perfect. You can actually seean
    example of a page on a
    >>> test
    >>> website at
    http://ww2.itrak.com/iTRAKnouveau/
    >>> I seem to remember I actually had this problem
    once before and I did not
    >>> have
    >>> it in Dreamweaver 8 but I am not sure of my
    recollection.
    >>> Unfortunately, this time I cannot access
    Dreamweaver 8 anymore... I am
    >>> really
    >>> hoping someone can solve this one with me!!
    >>> Christine
    >>>
    >>
    >>
    >

  • Dreamweaver CS3 incompatible with Contribute CS3

    All my Conribute connections no longer work with DW CS3 &
    CT CS3. Why?
    1. I have correctly set up a remote connection in Contribute.
    The contribute connection to the website IP is established.
    2. The FTP connection from DW to the website IP is also
    correctly established and working.
    3. The connection information is identical for both
    applications and verified.
    4. PROBLEM: When trying to set up the Contribute connection
    from within DW, the following error msg appears: "Dreamweaver could
    not connect to the remote server. You cannot perform Contribute
    administration tasks without a connection to the remote server.
    Please fix the remote connection before proceeding."
    5. NOTE: When the "Administer Site in Contribute" (or Test)
    button is clicked in DW, it appears that several files are being
    loaded to the remote server before the error message appears.
    Subsequent attempts at clicking the buttons seems to load more
    files. Very weird.
    6. FACTS: There is no problem with the remote connection from
    either DW or CT.
    QUESTION: What's up with this message? Why is there a failure
    to communicate between these two application that wasn't there
    before?
    Thanks in advance for any assistance,
    Chris Kane

    Contribute Connections have always sucked and break for a
    variety of reasons. There is little acknowledgment or support from
    Adobe on this issue, and many threads offer cryptic server settings
    that should only be employed by a qualified web administrator.
    You can sometimes solve the problem by trying some different
    FTP settings.
    In Dreamweaver Remote Info settings:
    Passive FTP ON/OFF, or Server Compatibility--FTP Performance
    optimization ON/OFF
    In Contribute Advanced FTP settings, try toggling the
    settings ON/OFF
    Be willing to blow away your previous Administrative
    Settings, so you will need to rebuild all of the roles,
    permissions, and users....

  • Preparing images for Dreamweaver cs3, using InDesign for templates

    Hi, I'm about to start putting all my files together for my
    website, but need to know in what form to save my images. I know
    they should be jpegs or gifs, but what resolution, and what size?
    Should I size them close to the size I want to see them on my
    website? For example if I want to make a little linked (like a
    thumbnail that you click on) image of a painting, and have the full
    size image of that painting open up, should I save that image in
    two different sizes?
    Also, the tutorial I'm learning from says I can make a
    template for use in Dreamweaver, with Photoshop or Illustrator, but
    I'd rather use InDesign. Can I use InDesign files as templates in
    Dreamweaver? If so, in what form should I save them?

    > Can I
    > use InDesign files as templates in Dreamweaver?
    it won't be of any practical use, except to print out and use
    as a guide.
    on the images, make them the PIXEL size they need to be in
    the web page.
    If you aren't sure yet what exact size they will be, make
    them a bit
    oversize. Then after changing the html display size of them
    in dreamweaver
    (click on the image, then press shift key and drag corner of
    image to
    resize) you can jot down the pixel size shown in the dw
    properties
    inspector, and resize the image in an image editor to those
    pixel
    dimensions. For a resolution, just use 72 ppi as a number to
    put there.
    It's the pixel dimension that matters.
    Alan
    Adobe Community Expert, dreamweaver
    http://www.adobe.com/communities/experts/

  • Dreamweaver CS3 - Problems with Firefox

    Hi,
    I'm pretty new to css and divs and need help fixing an error
    on two pages of the following site:
    www.caroleoconnell.com and
    www.caroleoconnell.com/OnlineStore.html
    The site appears fine in IE7. If one tries to open the same
    site in Firefox, the content in the middle section looks scrambled
    and overlapping, which obviously indicates that the css rules
    create somehow a conflict for Firefox.
    The error message in Dreamweaver shows the following:
    “Found 1 errors in external css files
    Affects: Firefox 2.0; Internet Explorer 6.0, 7.0; Internet
    Explorer for Macintosh 5.2; Netscape 8.0; Opera 8.0, 9.0; Safari
    2.0”
    The attached shows the css rules.
    Please let me know if you can walk me through the correct
    setup or if you have any info/knowledge about resolving this issue.
    Thanks in advance.
    Fred
    Phone - 404.513.4902
    E-Mail - [email protected]

    This could use some attention too -
    scrollbar-face-color:#;
    scrollbar-track-color:#;
    scrollbar-arrow-color:#;
    scrollbar-3Dlight-color:#;
    scrollbar-base-color:#;
    scrollbar-shadow-color:#;
    scrollbar-darkshadow-color:#;
    scrollbar-highlight-color:#;}
    just delete the lot.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "fthomas27" <[email protected]> wrote in
    message
    news:[email protected]...
    > Hi,
    >
    > I'm pretty new to css and divs and need help fixing an
    error on two pages
    > of
    > the following site:
    >
    > www.caroleoconnell.com and
    www.caroleoconnell.com/OnlineStore.html
    >
    > The site appears fine in IE7. If one tries to open the
    same site in
    > Firefox,
    > the content in the middle section looks scrambled and
    overlapping, which
    > obviously indicates that the css rules create somehow a
    conflict for
    > Firefox.
    >
    > The error message in Dreamweaver shows the following:
    >
    > ?Found 1 errors in external css files
    > Affects: Firefox 2.0; Internet Explorer 6.0, 7.0;
    Internet Explorer for
    > Macintosh 5.2; Netscape 8.0; Opera 8.0, 9.0; Safari 2.0?
    >
    > The attached shows the css rules.
    >
    > Please let me know if you can walk me through the
    correct setup or if you
    > have
    > any info/knowledge about resolving this issue.
    >
    > Thanks in advance.
    >
    >
    > Fred
    >
    > Phone - 404.513.4902
    > E-Mail - [email protected]
    >
    >
    >
    > td {
    > text-align: left;
    > vertical-align: top;
    > font-family:Tahoma;
    > font-size:11px;
    > color:#6C7D88;
    > line-height:12px;
    > }
    > a {
    > text-decoration: underline;
    > color:#5182B3;
    > }
    > a.1 {
    > text-decoration: none;
    > color: 000000;
    > }
    > .t11 {
    > font-family: Tahoma;
    > font-size: 11px;
    > font-style: normal;
    > }
    > body { margin:0px;padding:0px;
    > scrollbar-face-color:#;
    > scrollbar-track-color:#;
    > scrollbar-arrow-color:#;
    > scrollbar-3Dlight-color:#;
    > scrollbar-base-color:#;
    > scrollbar-shadow-color:#;
    > scrollbar-darkshadow-color:#;
    > scrollbar-highlight-color:#;}
    > .blue {color:#6C7D88}
    > .light_blue {color:#5182B3}
    > .orange {color:#F38900}
    > .bott {color:#FFFFFF; font-size:9px;
    text-decoration:none}
    >

  • Dreamweaver CS3 problem with small fonts

    Hello,
    I am having a problem with text appearing
    REALLY SMALL and unreadable in CS3, when it looked fine in
    Dw8. It also looks fine in in all browsers.
    I talked to Adobe tech support, and they said something about
    my CSS file not being correct. I looked at it, and nothing seems
    out of the ordinary.
    If it was a problem with my CSS file, wouldn't it look bad in
    the browser as well?
    Any suggestions?
    Ron

    Ron,
    Thanks for the sample file. This is a bit complicated, so
    please bear
    with me.
    Up until DW8, DW rendering always targeted the most popular
    browser at
    that time. For DW8, that was IE6. Traditionally, the most
    popular
    browser was the most popular because it was the best browser,
    but that
    no longer holds true. So, DW CS3 now targets CSS 2.1. Note
    that DW does
    not support all of the CSS 2.1 spec, but what it does support
    follows
    the spec.
    Your page does not have a DOCTYPE, so it renders in "quirks"
    mode in the
    browsers that I tested it in on WinXP (FF2, IE7, Opera9). DW
    renders
    this page in IE6 quirks mode, but DW CS3 no longer supports
    quirks mode.
    Put a DOCTYPE such as the following in your page to see what
    I mean:
    <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01
    Transitional//EN"
    http://www.w3.org/TR/html4/loose.dtd">
    The reason that the font is so small is because of the
    font-size
    property in this rule:
    TD {
    FONT-SIZE: 80%;
    Your page has tables nested 4 levels deep, so the 80% is
    compounded at
    each level. I fixed this in DW CS3 by creating a style sheet
    with this rule:
    TD { FONT-SIZE: 100% !important; }
    and the applied it as a Design-time Style Sheet, although you
    may be
    able to remove the 80% altogether.
    Hope this helps,
    Randy
    > Here's a link to the page:
    >
    http://www.ualberta.ca/AICT/IMS/
    >
    > You should be able to download the source for the page,
    if you so desire...!
    >
    > Thanks in advance for any suggestions...

  • Ultra cs3 use with Master Suite 5.5

    I installed Adobe Master Suite 5.5 & reloaded the Adobe Ultra 3. Everything is fine with the 5.5 suite but the Ultra CS3 still asks that a CS3 Suite be provided.
    How do I connect the Ultra to the new suite 5.5?

    How do I connect the Ultra to the new suite 5.5?
    You don't. CS3 was the only version that ever actually contained Ultra, so you need that to run it.
    Mylenium

  • Dreamweaver CS3 quits unexpectedly

    Hello,
    I've been using Dreamweaver CS3 on Windows Vista, and no
    problems until I made some external css to my web page. Now every
    time I open my page to edit or any other page that has this css
    Dreamweaver CS3 hangs with a dialog like this:
    Adobe Dreamweaver CS3 has stopped working
    Windows is collecting more information about the problem.
    This might take several minutes...
    I tested this page on several different systems and always
    get this error. Seems to be a bug with DW CS3.
    I guess I can call it killer.css
    I will attach the code (sorry, it's quite big) so you can see
    it for yourself... really disturbing that a CSS code can crash the
    DW CS3.
    David

    Nevermind.... I rewrote the code an it's not hanging anymore.
    It seems there was a 'hidden' character on the css code... strange.
    David

Maybe you are looking for