Dreamweaver CS3 will not load up

I went to startup my Dreamweaver CS3 like always and it
would not load. I have been using it fine for months with no issues
and today it just died. I get an error of Program is unable to open
please reinstall or repair files. But nothing else is give for an
error. I removed the program and rebooted and reinstalled. It never
asked me for the serial number I though it is most likley still in
the registry somewhere. I still get same error. Is there a 100% way
to remove all items of DCS3 from my PC and reinstall 100% fresh?
Thanks

tim_ver wrote:
> Licensing of this product has stopped working. Try
unintsalling and then
> reinstalling. I did this again and still same error.
>
> How do i fix this issue?
If you go to the Adobe Support Knowledgebase, you can find
this sort of
answer for yourself. Type "licensing has stopped working"
into the
"Search for" field, select "Dreamweaver" from the "Product"
menu, and
click search. The following page comes up as the first
result:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528&sliceId=1
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

Similar Messages

Dreamweaver CS3 will not save page

I have few details as I'm troubleshooting for a client, but hopefully someone can help get me to the answer...
Client has Dreamweaver CS3. Been using it for about a year (and before that, earlier versions). One person now cannot save files. After making a change, Save is still gray and keyboard shortcut (ctrl+S) does not work.
Other things I know (via phone conversation):
- Using Windows XP
- Check in/Check Out is enabled, and she is able to check out the file
- Editing on local and uploading to remote
- Other people within organization can save changes to the same pages
- all users have same FTP username and password
- I am using DW 8 and can access, make changes and save to same pages
- She can Save As...
Any ideas will help.
Thanks in advance!
Carrie

tim_ver wrote:
> Licensing of this product has stopped working. Try
unintsalling and then
> reinstalling. I did this again and still same error.
>
> How do i fix this issue?
If you go to the Adobe Support Knowledgebase, you can find
this sort of
answer for yourself. Type "licensing has stopped working"
into the
"Search for" field, select "Dreamweaver" from the "Product"
menu, and
click search. The following page comes up as the first
result:
http://kb.adobe.com/selfservice/viewContent.do?externalId=kb401528&sliceId=1
David Powers, Adobe Community Expert
Author, "The Essential Guide to Dreamweaver CS3" (friends of
ED)
Author, "PHP Solutions" (friends of ED)
http://foundationphp.com/

CS3 will not load past registration window

Suddenly today, trying to open CS3 I get blank registration window which it will not go beyond.
The application is there in the background but everything is greyed out. I must say I am not sure I have ever filld inal the registration details, I have just always pressed the 'later' button.
I must have had CS3 for years now – is it trying to force me to upgrade?
Anyone know how I can fix it?
Cheers.

Disconect internet
Start CS3
Say never to error screen
reconnect to internet
Hopefully this should solve the issue:

Dreamweaver CS3 will not launch in OS10.7.5 even with Java plugin.

I installed the Java runtime environment, thinking that would allow me to launch Dreamweaver CS3 in my new OS, but no. I get a blank alert with ! and no message, and no program. Any suggestions? Do i need to do something to get the Java plugin to connect with Dreamweaver??
Thanks!

Did you followed the steps mentioned in http://helpx.adobe.com/x-productkb/global/install-java-jre-mac-os.html ?
If so, restart your computer and then try installing DW.

Indesign CS3 will not load

I have Adobe Creative Suite CS3 installed on my home PC (Windows XP). All the Adobe programs will start without problems, except Indesign CS3. Nothing happens when I try to start the program. Not even a message comes up? Can anyone help me solve this problem?
With kind regards
Maria

I have the same issue on a pc that I've loaded CS3 on. I have a corporate license of CS3 and know for sure the seat is available for install to this machine. It's a Dell Optiplex GS270, P4 @ 2.66Ghz, 2GB ram. the OS is XP pro, fully patched. I'm only using a single Dell monitor. I ran typical install of CS3 from disk, got all the updates from Adobe. Everything opens just fine except for InDesign. When I try to launch the InDesign.exe process appears in Task Manager for 1-2 seconds and goes away. Nothing else happens, no error messages, nothing.
I've loaded CS3 on my other users without any problem. Any help would be greatly appreciated.
Thanks, John

Error message: "Missing required plugins" - Illustrator CS3 will not load

I am running CS3 Web Prem on Vista, dual core Athlon with 2g Ram.
Illustrator has stopped working - gives error message: "Missing required plugins. Pathfinder Suite." Or it says "Missing required plugins. ArtConverters.aip PDFformat.aip Pathfinder suite.aip Rasterize.aip"
I have tried the suggestions from knowledge base article - I have tried deleting AIprefs; I have also tried in new user account - initially worked but not on opening program a second time. I have also re-installed Illustrator.
Any other solutions?

Glad to hear it.
Not sure what possible nuances to performance or memory management there may be to running in compatibility mode. Since I can't run in any other mode, it is hard to make a comparison.
It seems to run fine though, for me.
There should be a Windows Update that came out in the last day or so that is supposed to address this issue (http://support.microsoft.com/kb/947562). At least thats what it says.
BUT, after that fiasco with SP1, I am real reluctant to do any more updates.
SP1 toasted my ability to connect with network resources, external and some internal hard drives, ALL my USB equipment failed to connect anymore. I removed SP1 (uninstalled it per the instructions on the MS KB) but that process trashed the OS and required a complete clean re-install of Vista. A week later I am pretty much back to where I should be (see, my system backups were with SP1. Brilliant, eh?).
Still have to run many so-called "Vista Compatible" applications in this compatability mode though.

Legacy CS3 will not load on MAC Air, (Lion 10.7)

CS 3 fails to install on a new MAC Air. Set stalls after initial screen. What's going on?
Thanks

Not a big shock actually. There's a Lion FAQ on the Adobe website with all known issues.
http://kb2.adobe.com/cps/905/cpsid_90508.html
Bob

Installed Dreamweaver and now my Photoshop 5.5 will not load.

I just paid for, downloaded and installed Dreamweaver/Creative Cloud and now when I try to start Photoshop 5.5 the program will not load (not responding.) Anyone have a fix for this?

Also... here are the details in the "close window box".
Description:
A problem caused this program to stop interacting with Windows.
Problem signature:
Problem Event Name: AppHangXProcB1
Application Name: Photoshp.exe
Application Version: 5.0.128.0
Application Timestamp: 377aeb69
Hang Signature: 15b9
Hang Type: 32
Waiting on Application Name: Adobe CEF Helper.exe
Waiting on Application Version: 2.9.1.474
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Hang Signature 1: 15b9637c1870353073a48b8c42420590
Additional Hang Signature 2: bcb0
Additional Hang Signature 3: bcb02abbce45adbdf96aa5831a7f6ae8
Additional Hang Signature 4: 15b9
Additional Hang Signature 5: 15b9637c1870353073a48b8c42420590
Additional Hang Signature 6: bcb0
Additional Hang Signature 7: bcb02abbce45adbdf96aa5831a7f6ae8

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It quits when the Twain portion of the program starts loading. Does anyone know how to fix this so my printer will work with Photoshop??

I recently bought an Epson Artisan 837 printer. I installed the driver and now Photoshop from CS3 will not open. It closes every time it gets to the point where it is loading the Twain portion. Does anyone know how to fix this so my printer and Photoshop will work together? Thanks for any help I can get!

You're welcome.
But, no, don't look to Epson for fixes to their driver in newer versions, and Adobe has deprecated the TWAIN plug-in. Hoping for a solution there is futile. That has not happened and it's never going to happen. The consensus is that it's pretty foolish to tie up Photoshop to scan. Honestly.
Any improvement in the behavior of newer versions of the Epson drivers in that regard would be pure coincidence.
You need to understand that you never, ever scan "within" Photoshop, as Photoshop has no scanning capabilities whatsoever. When you use the Import > Twain plug-in all you are doing is blocking Photoshop while you call up the stand-alone Epson scanning software. If you think about it, its most inefficient.
VueScan has a pretty powerful scanning plug-in that can be called from the Impost menu—if you insist. VueScan is not free, but it's a pretty good value, IMO.
As for the Epson CD printing software, I have no clue. Sorry.

Adobe Premiere CS3 will not open!

Adobe premiere CS3 will not open. When I click on the Adobe icon on my desktop, I get this message: This application has failed to start because prm.dll was not found. I've tried several things such as: uninstalling the program then reinstalliing it. I tried to open Adobe by clicking on one of my projects by opening MY Computer from start on the taskbar, then click on c drive, etc. but it will not open. Before I started getting the error message stated above, when I clicked on the icon, the program would load to the point of showing the top portion of the page (file, edit, etc.) then stop. It would never fully load. HELP!!!!! I'm in the middle of trying to meet several deadlines.

First, search your system for every instance of prm.dll. See if you have one (could be corrupt, but a Repair Install should have repaired it) in your PrPro CS3 folder hierarchy. Do you have any more? How do the dates and sizes compare to the one, if there is one, in PrPro? Here is a LINK to a .dll site. I do not know this site, so cannot even comment on their .dll's. I'd do the first suggestion, well - first.
Also, I do not know this .dll. It could be a VST from an Audio editing program, or similar. Some of these have been known to bring PrPro to its knees, at launch. Might be worthwhile to check into it a bit more.
Also, take a look at Event Viewer. This ARTICLE will give you some tips on what to look for. Could be more happening, than the error message might lead one to believe.
Good luck,
Hunt

My site will not load in design view?

I can not figure this out for the life of me but I am hoping someone here can give me a simple solution. I have spent endless hours trying to figure out why my site will not load when attempting to open any of the template or html files of my local site in design view. They open fine in Code view but when I click on design view, I get an hour glass that only goes away if I close dreamweaver using ctrl + alt + delete and use the task manager to close the process. My web address is www.thebluedot.net if that helps...
Any web pages outside of my actual site open fine so I am not sure what is causing the issue with my site itself? I have opened the template and have deleted all the code from it and attempted to view the file in design view and still get the same problem. Is there perhaps something simple that I am overlooking? My site worked fine in design view several days ago and I can not think of any changes that I made that may be causing the problem. I have uninstalled and reinstalled the entire adobe suite and I am still having the issue.
I am running on Windows Vista and have 4 gigs of ram and a 2.6 Core Duo processor if that helps.
Please help me out here. Really would appreciate any help you can provide!

Really appreciate your response.
I am using Dreamweaver CS4 and I tried deleting the config folder. Still no luck...
Eerything opens fine except for files fom my site. I have deleted the site from Manage Sites and recreated it but still am having the same problem.
When I delete the Configuration folder do I have to reset it up some how? Why is dreamweaver rendering all my other files outside of my site folder successfully in desgn view and not giving any other files an issue? I really hope I can get this resolved soon.
Again, appreciate your help.

Dreamweaver CS6 will not start

I've had this problem for several weeks and thought I had it fixed by resetting the Preferences (http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html), however, my DCS6 application will not start again, and it seems to happen when I'm out of my docking station, and working from home.
Initally, I uninstalled/reinstalled DCS6 twice, and each time it worked, and then stopped working when I got out of the dock. Then, as I said, I found the documentation to remove the established Preferences. It worked fine in the office, but will not load again working from home.
The DW logo comes up on the screen, but hangs there. It never loads plug-ins or any of the other animations I normally see on the logo screen during a normal launch. The only way to stop the logo is to open Task Manager, locate Dreamweaver(whatever).exe under the Processes Tab and End Task. Dreamweaver is not listed in the Applications Tab.
Fortunately, Dreamweaver CS5.5 wasn't automatically deleted when I installed the new software, and it works fine, so at least I can get my work done.
i need some help with this, please.
Thank you.
Frank

So I take it that you have also cleared the registry entries as suggested in the document linked in your first post.
So we now need to prove that your Windows Profile isn't the culprit to make DW un-startable. To prove this, create a new user account on your machine (temporary or otherwise). To do this follow these instructions:
To create a user account
To open User Accounts, click the Start button , click Control Panel, click User Accounts and Family Safety, and then click User Accounts.
Click Manage another account. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
Click Create a new account.
Type the name you want to give the user account, click an account type, and then click Create Account.
Please post back if this worked or not. If it worked then you may want to use this account for your DW work otherwise we need to find some other solution. Make sure the account is Limited if you plan to use for everyday work because creating an Administrator account is not advisable.
Good luck this time.

Edge Code will not load in web browser

My OEM edge code will not load in web browser after it has been uploaded to the server. I am using dreamweaver & the OEM file.
The images are all grouped & labeled properly (within Edge Animate). Note the website will not load with ANY web browsers UNLESS you hit the refresh button or reload the web address.
www.anndominion.com
Can somone please tell me what is going on or how to fix the problem? ;(
Here is the code for the website too.
Any help would be great!
<!doctype html>
<html>
<head>
<meta charset="UTF-8">
<meta http-equiv="X-UA-Compatible" content="IE=Edge"/>
<title>Welcome</title>

<meta http-equiv="X-UA-Compatible" content="IE=Edge">
<script>
var custHtmlRoot="edgeanimate_assets/Home/Assets/";
var script = document.createElement('script');
script.type= "text/javascript";
script.src = custHtmlRoot+"edge_includes/edge.5.0.1.min.js";
var head = document.getElementsByTagName('head')[0], done=false;
script.onload = script.onreadystatechange = function(){
if (!done && (!this.readyState || this.readyState == 'loaded' || this.readyState == 'complete')) {
done=true;
var opts ={
    scaleToFit: "width",
    centerStage: "none",
    minW: "0",
    maxW: "undefined",
    width: "1500px",
    height: "800px"
opts.htmlRoot =custHtmlRoot;
AdobeEdge.loadComposition('Home', 'EDGE-292846011', opts,
{"style":{"${symbolSelector}":{"isStage":"true","rect":["undefined","undefined","1500px", "800px"],"fill":["rgba(255,255,255,1)"]}},"dom":[{"rect":["716px","356","88px","88px","aut o","auto"],"id":"preloader5","fill":["rgba(0,0,0,0)","images/preloader5.gif","0px","0px"], "type":"image","tag":"img"},{"rect":["645px","480px","229px","79px","auto","auto"],"font": ["Arial, Helvetica, sans-serif",[24,""],"rgba(0,0,0,1)","normal","none","","break-word","normal"],"id":"Text" ,"text":"Please Tap Refresh <br>To Load Content.","align":"center","type":"text"},{"rect":["555px","283px","361px","103px","auto" ,"auto"],"font":["Arial, Helvetica, sans-serif",[24,"px"],"rgba(0,0,0,1)","400","none solid rgb(0, 0, 0)","normal","break-word","normal"],"id":"Text2","text":"","align":"center","type":"text" }]}, {"dom":{}});
script.onload = script.onreadystatechange = null;
head.removeChild(script);
head.appendChild(script);
</script>
<style>
        .edgeLoad-EDGE-292846011 { visibility:hidden; }
    </style>

</head>
<body>
    <div id="Stage" class="EDGE-292846011"></div>
    </body>
</html>

Keith,
Make sure the Cluster configuration is right. When did you start seeing this problem?
Host A: Dispatcher->server 0, server 2
Host B: Dispatcher->server 0, server 2
i.e The instance IDs are mapped right.
Also try to hit the individual servers in the cluster the following way.
http://hostname1:50000/irj/portal;sapj2ee_irj=instance_id sends a request to server 0.
http://hostname2:51000/irj/portal;sapj2ee_irj=instance_id sends a request to server 1.
This may give more clues. Unfortunately I don't have access to EP6 SP2 to lookup and tell you the right parameters to look for.
Regards
-Venkat Malempati
Message was edited by: Venkat Malempati

Have had to re-install everything on my computer but Photoshop elements 11 disk will not load. Help?

have had to re-install everything on my computer but Photoshop elements 11 disk will not load. Help?

you can download the installation file,
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.<

After install when starting photoshop will not load so I can enter serial number

after installing photoshop cs3 on windows 7 when I start photoshop it will not load so I can enter serial number. why?

iOS devices cannnot be tracked or located with just the serial number. Unless you shared your Apple ID and password with anyone, then your account cannot be accessed at the iTunes Store.
Reporting a lost or stolen Apple product
To be on the safe side, change your Apple ID password ASAP > Support - Apple ID
Read here > Apple ID: Tips for protecting the security of your account

Dreamweaver CS3 will not load up

Similar Messages

Maybe you are looking for