Dreamweaver CS3 won't run with OS 10.9

How can I use Dreamweaver CS3 with OS 10.9?

You can't. Or at least, you shouldn't.
I'm pretty sure CS3 would require "Rosetta" which Mac OS X hasn't supported since Snow Leopard (OS 10.6)
It ran on some of the early Intel Macs, but you should be using CS4 or newer with Mavericks and a 64 bit Intel Mac.

Similar Messages

Please help, CS3 won't run with 10.5.2! Please!

Installed 10.5.2 on my g5 dual 2.5 w 4.5 gigs ram (NOT) intel. Now my AE projects won't run. One started to and then quit. This is major for me. Involves dozens of projects. Please help.

Yes, my powerbook is also trouble-free.
But it's just too slow to run AE on.
And yes, yes, I did repair permissions. I did everything including a "safe" starup, repair permissions many many times, etc. etc. etc.
I'm beginning to think the problem with AE was with non-ae plugins. But then why did automator and software update cease to work?????

Can Adobe Dreamweaver CS3 be made compatible with Windows 7?

Can Adobe Dreamweaver CS3 be made compatible with Windows 7

You might need to run it in compatibility mode.
http://windows.microsoft.com/en-us/windows7/make-older-programs-run-in-this-version-of-win dows
Nancy O.

The latest Firefox won't run with Mac OS 10.4.11. How can I get the previous version of Firefox?

I have Firefox 12.0. It won't run with Mac OS 10.4.11. I do not want to have to buy a new computer right now. I would like to go back to a previous version of Firefox that will run with my operating system. How can I download an older version of Firefox?

You can find the latest Firefox 3.6.x release in all languages and for all Operating Systems here:
*ftp://ftp.mozilla.org/pub/firefox/releases/latest-3.6/

I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

I have Dreamweaver CS3 on a PC with Windows Vista SP2. The program recently began to hang when opening previously created HTML files. How do I fix this?

Hi rmarchione,
Can you try restoring preferences and let us know if it helps?
Restore preferences | Dreamweaver CS4, CS5, CS5.5, CS6
Thanks,
Preran

MOVED: Won't run with 2 CPUs

This topic has been moved to Server/workstation.
Won't run with 2 CPUs

Okay. Power supply info. Had to break my system down because the side that had the info on it was covered by the top of the tower.
Enhance Electronics
Model: ATX-1140F with Outlet
400 Watt Power Supply
+3.3v(28A), +5V(38A), +12V(18A), -12V(.8A), -5V(.5A), +5VSB(2A)
The 4 pin connector is plugged in. =) I did not overlook that.
As for trying it with fewer memory sticks, no I have not tried that but keep in mind that earlier today the previous mobo was in this machine and running with both CPUs and all 3 memory sticks (512, 512, 1024). All in the same memory slots as the original mobo. I pulled each one and inserted it in the new mobo before taking out the next one to be sure I put them back in the same slot.
I checked and double checked all the bios settings and they match. The only thing that has changed since this morning is the replacement mobo and that is the exact same model as the one I replaced. System works fine with 1 CPU but not with 2. What might cause that on this motherboard but not the original one?

My Dreamweaver CS3 Won't Open

I had to do a System Restore on my Windows Vista, Home Premium PC. Ever since I did that, when I try to open Dreamweaver CS3 I get this...
When I hit OK, it just closes the program. So basically, there's no way I can use Dreamweaver now. Anyone have any ideas?

Sounds like a restore issue. Could be anything from a registry entry that got modified and is causing issues to just about anything. Best bet is to run the clean utility and start a fresh install of CS3.
http://www.adobe.com/support/contact/cs5clean.html
Just ignore the name in the link. As of CS5 they combined the utility into one and it works for CS3-CS5.

Dreamweaver CS3 will it work with Contribute CS4 Mac 2 PC

Hi I asked this same question in the contribute area of the
forum bu then thought t may be best to ask here as I wanted to know
if Contribute CS4 will work with Dreamweaver CS3?
I take it for granted that it will, I have a mac and will
create a site with Dreamweaver CS3 and then have the client who has
a PC to buy Contribute CS4, will this work okay or do I need to
create the site with a PC and with Dreamweaver CS4?

I just read on the adobe website that:
"Contribute CS4 works with Adobe Dreamweaver® CS4
templates"
Does that mean it wont work with Dreamweaver CS3 templates?

How do I roll-back to the previous version of Firefox? An auto update occurred and now one of the programs used at the office (ACT! v6.0 SwiftMail) won't run with the browser.

The office I work in uses a very old version of ACT!, an accounting package. This package has a component called SwiftPage, an antiquated email system that enables us to email from the ACT DB. SwiftPage runs via the web browser.
Firefox just did an auto update (that I will have to find out how to turn off) and now SwiftPage won't run as it is not compatible.
Can I "roll-back" my version of Firefox or do I have to uninstall and try to re-install an older version?
HELP!

Try loading and using the add-on from this link: https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
Many add-ons do in fact work if you force them to run. The procedure to roll-back is given in this article: [[installing previous versions of firefox]]
Unfortunately the official Firefox policy is that you downgrade to 3.6 which is supported for a while longer, and not the now unsupported Firefox 4. If after installing and running the ''add-on compatibility reporter'' you still have problems there are ways around the official policy.
I think it is absurd that Firefox 4 may be used by tens of millions of users one day and a few days later those that upgrade to Firefox 5 should be not only told not to use a now unsupported browser, if they need to revert due to problems, but are actually obstructed in attempts to do so. See also [/questions/840397#answer-205154]

I downloaded the new firefox and now I get an error stating it won't run with my version of Mac OS? What is the fix?

I was prompted to upgrade to Firefox 4 - I have a 3.6 version. When I move it to my application folder and tried to run it, I get the error that it cannot run with my version of Mac OS. I'm not sure how to update my OS version or go back to an older version of Firefox.

Firefox 4 requires at least OS X 10.5. You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Won't run with 2 CPUs

I just replaced my 6501 motherboard with one that MSI sent me. When I install both processors the computer most times hangs at startup screen. Lights 2 and 3 are red which indicates it stops at the Bios sign-on.
It hangs where it says AMD MP 2800 Processor but before memory test and it does not display the , (2 cpu's) to the far right of the processor (80% of the time this happens on boot-up). Occasionally when I reboot it will detect both CPUs and will initialize the bios and then start loading windows at which point it immediately reboots.
If I remove the second CPU and reboot the machine boots fine and I can load up windows.
I have swapped both CPUs and put both of them in the Primary CPU slot and they both boot up and run fine no issues. Only when I try to have both in do I have problems. The reason I replaced the MB was because of some dried out capacitors. I got the 1.91 bios update already. Not sure what might be causing this but I want both CPUs working like before. Any help would be appreciated.
This is the first time this board has been used. I pulled it out of the box this morning. It is a refurbished board from MSI. The other board with the dried out capacitors ran both CPUs fine without issue but I had data transfer issues so had to replace it. The newest bios available for this motherboard appears to be award bios v1.91 which is the one I have.
If any further info is needed let me know what else you need. (I am on the computer having troubles right now but with only 1 CPU running - works fine albeit a bit slower)

Okay. Power supply info. Had to break my system down because the side that had the info on it was covered by the top of the tower.
Enhance Electronics
Model: ATX-1140F with Outlet
400 Watt Power Supply
+3.3v(28A), +5V(38A), +12V(18A), -12V(.8A), -5V(.5A), +5VSB(2A)
The 4 pin connector is plugged in. =) I did not overlook that.
As for trying it with fewer memory sticks, no I have not tried that but keep in mind that earlier today the previous mobo was in this machine and running with both CPUs and all 3 memory sticks (512, 512, 1024). All in the same memory slots as the original mobo. I pulled each one and inserted it in the new mobo before taking out the next one to be sure I put them back in the same slot.
I checked and double checked all the bios settings and they match. The only thing that has changed since this morning is the replacement mobo and that is the exact same model as the one I replaced. System works fine with 1 CPU but not with 2. What might cause that on this motherboard but not the original one?

Vids won't run with Safari, but work with FireFox just fine

I can't get vids to run with Safari. Where the vid is supposed to be, on YouTube etc, it's just blank. They run fine with FireFox, though. I don't mind using FireFox, its a great browser. I just don't like the idea of something being wrong with my MacBook.

Make sure your plug-ins are enabled in Safari (preferences) and that you're not using Rosetta mode (Get Info window).
http://www.adobe.com/shockwave/download/alternates/
Uninstall Flash and reinstall the software.

My adobe illustrator CS3 won't work with OS X Yosemite

after installing OS X Yosemite software upgrade my Adobe Illustrator CS3 will not open with the ability to use the tools, only as a Read only file. I was told to install JavaForOSX2014-001 but that has not helped.

Yes I am having the same exact issue. CS6 works fine except for InDesign. I have used the Java Legacy Updater with no help to the scenario. Just bounces up/down and then gives me this nice little error message, which I get repeatedly:
Process:               Adobe InDesign CS6 [18601]
Path:                  /Applications/Adobe InDesign CS6/Adobe InDesign CS6.app/Contents/MacOS/Adobe InDesign CS6
Identifier:            com.adobe.InDesign
Version:               8.0.2.413 (8020)
Code Type:             X86 (Native)
Parent Process:        ??? [1]
Responsible:           Adobe InDesign CS6 [18601]
User ID:               501
Date/Time:             2014-10-30 21:46:19.275 +1100
OS Version:            Mac OS X 10.10 (14A389)
Report Version:        11
Anonymous UUID:        B71FA47B-7511-EFDE-446A-BABE89BDBEB7
Time Awake Since Boot: 420000 seconds
Crashed Thread:        0 Dispatch queue: com.apple.main-thread
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000000000000
VM Regions Near 0:
...and then goes on forever.
Model Name: MacBook Pro
Model Identifier: MacBookPro6,1
Processor Name: Intel Core i7
Processor Speed: 2.66 GHz
Number of Processors: 1
Total Number of Cores: 2
L2 Cache (per Core): 256 KB
L3 Cache: 4 MB
Memory: 8 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MBP61.0057.B0F
SMC Version (system): 1.57f18
Sooooo frustrating. Tried re-installing too. Still not working.
Ugh.
Any advice greatly appreciated.
Cheers!

WinProducer2 start error, won't run with nVidia Capture drivers

I'm not having a good experience with the bundled WinProducer2 that came with my MX440VT8x-128.
If I have either of the versions of the nVidia capture-drivers that came on the card's CD (that's v. 1.16 or 1.18) installed, or the 1.22 version from nVidia's website (as of 2-20-03), and then try to start WinProducer, I get the same start-error every time:
"WinProducer.exe has generated errors and will be closed by Windows....need to restart program...an error log is being generated."
If I look at the Dr. Watson log, it says WinProducer 2 generated "Exception Violation c00005."
If I uninstall the nVidia capture-drivers, WinProducer2 opens right up just fine, but, of course, with no capture capability.
I downloaded and tried (after uninstalling v.2) WinProducer3 from InterVideo's website yesterday (2/20/03), with the exact same results! ???
Anybody else having this problem?
This is under Win2k, w/SP2, then added SP3, with no improvement.
Stenn

After I made the original post, I tried a lot more things that didn't help:
I booted in safe mode and tried it but PSP gave an error message that it wouldn't run with the screen resolution that low (800x600); so it did try to run. So I booted normally and set the screen rez to 800x600 manually, then tried to run PSP and got the same error message.
I did a clean boot with all start-up programs and all services disabled; PSP still wouldn't run.
I disabled my anti-virus and PSP still wouldn't run.
Disabled my video card in the device manager and booted with my on-board video; PSP still wouldn't run.
There's never an error message as long as the screen rez is high enough; when I try to run it, it looks like it's starting to run but nothing ever happens.

BC4J Tester won't run with SunJCE provider enabled in JDev 903

I have a working BC4J project that I can access via the Tester and via code in JDev 903. The Module is deployed in 'Local' mode.
I go into <jdev_home>\jdk\jre\lib\security\java.security and add the following line:
security.provider.3=com.sun.crypto.provider.SunJCE
I can no longer run the BC4J Tester - I get "java.lang.NullPointerException" - that's it - in the log window when I try to run the tester. I can still access the BC4J Module via code, just as before enabling the SunJCE provider, its just the Tester that won't run. My code that uses the SunJCE provider runs fine.
I then comment out the new line in java.security, and the Tester runs fine again. (But, of course, my code that needs the SunJCE provider does not...)
Note that I added this provider as the lowest order provider - the following is how java.security is setup when JDev is installed:
security.provider.1=sun.security.provider.Sun
security.provider.2=com.sun.rsajca.Provider
Any thoughts or ideas?
Thanks,
Jim Stoll
(I need this provider for something else I'm doing which uses both the SunJCE provider and BC4J, independent of each other)

Hi,
Can you create a JClient project to test your application module? I have not found why it failed in Tester when using SunJCE privider, but found that if I create a simple JClient using the same application module, it work.
Thanks,
Yvonne

Dreamweaver CS3 won't run with OS 10.9

Similar Messages

Maybe you are looking for