Dreamweaver CS4 auto close not functioning properly

Hey everyone,
A friend just gave me a trial version of Dreamweaver and I've been testing it out. However I found it odd that some tags auto-close and some don't. An example of this is when I put the <b> tag it auto-closes, but when I type in a <div> tag it doesn't. I already changed the preferences so tags are closed after the opening tags ">". Just wondering if there is another preference I need to change or a bug in the software.
Any help would be appreciated.
Thanks in advance,
GK

kbarre wrote:
Auto Sync is functioning as expected, unless I choose Auto Tone first.
If I choose Auto Tone first, a small portion of the selected images will be updated, but most will not.
Lightroom's handling of auto-tone leaves something to be desired - I have a lot of experience with it, trying to make reliable develop-setting plugins which include auto-toning. Those plugins have a bewildering amount of logic - something like this: initiate auto-toning, check back to see if it has properly settled, issue the auto-toning again if it never seems to be properly settling... - usually it works out after a while, but even sometimes it never does, and generates an error: can't get auto-toning to settle across all photos.
The point of all this is that there are bugs in Lr's handling of auto-toning, as you are growing aware.
Try this:
* do the auto-toning, then let it percolate for a while.
* then visit each photo at 1:1 (to force Lr to finalize settings...), and confirm auto-toning has settled...
Then try auto-syncing that preset (make sure process versions are all the same, and preset does NOT include auto-toning - I would leave process version OUT of your presets).
Better?
I don't expect this is a workflow you'll want to do all the time, but as a test it might help shed some light on the problem.
Rob

Similar Messages

  • Auto Sync not functioning properly after Auto Tone

    Auto Sync is functioning as expected, unless I choose Auto Tone first.
    I have about 1000 Images that I wish to apply a Preset to. When I created the Preset using New Develop Preset, I left all of the options checked except Exposure.
    I want to use Auto Tone to set the exposure for each image automatically, and then apply my preset to all images, leaving their exposures unchanged. If I apply the Preset to all of the images before selecting Auto Tone, everyting works as expected. If I choose Auto Tone first, a small portion of the selected images will be updated, but most will not. The preset will change all settings except those in the Basic Tone area. It's as if Auto Tone has somehow become "sticky" and will not allow itself to be overridden. Even if I choose a single image, apply my new settings to it, and then manually select Sync, it doesn't work for all images. It also won't work if I have have Auto Sync selected, and then make manual changes to individual sliders. It will work for some images near the ones I see in the filmstrip on the bottom, but not all of the images selected.
    This is extremely frustrating. Again, everything works exactly as expected, unless I choose Auto Tone first.

    kbarre wrote:
    Auto Sync is functioning as expected, unless I choose Auto Tone first.
    If I choose Auto Tone first, a small portion of the selected images will be updated, but most will not.
    Lightroom's handling of auto-tone leaves something to be desired - I have a lot of experience with it, trying to make reliable develop-setting plugins which include auto-toning. Those plugins have a bewildering amount of logic - something like this: initiate auto-toning, check back to see if it has properly settled, issue the auto-toning again if it never seems to be properly settling... - usually it works out after a while, but even sometimes it never does, and generates an error: can't get auto-toning to settle across all photos.
    The point of all this is that there are bugs in Lr's handling of auto-toning, as you are growing aware.
    Try this:
    * do the auto-toning, then let it percolate for a while.
    * then visit each photo at 1:1 (to force Lr to finalize settings...), and confirm auto-toning has settled...
    Then try auto-syncing that preset (make sure process versions are all the same, and preset does NOT include auto-toning - I would leave process version OUT of your presets).
    Better?
    I don't expect this is a workflow you'll want to do all the time, but as a test it might help shed some light on the problem.
    Rob

  • Satellite P300D-110 integrated webcam is not functioning properly.

    Hello everyone,
    as the title says, the integrated webcam of my Toshiba Satellite P300D-110 is not functioning properly. Allow me to explain. Using the Camera Assistance Software I can take photo's and record music. If I try to record a video the preview screen turns up black and the end result tuns out black aswell, completely black.
    Whenever I try to use my camera with applications such as MSN Live Messenger, Skype or at community websites using Firefox, Internet Explorer or Safari the application in question crashes.
    *How did this happen?*
    You tell me. This is how it went;
    * Day 1: I've started up my laptop and looked at my fresh and clean install of windows vista home premium. I tried out my webcam using the webcam assistance software and it worked like a charm.
    * Day 2: Once again I boot up my laptop and try to start my webcam only to find out that it no longer functions.
    To give a quick summary of the thread;
    * Using Camera Assistance Software provided by Toshiba I can take pictures.
    * Using Camera Assistance Software provided by Toshiba I can record sound.
    * Using Camera Assistance Software provided by Toshiba I can _*NOT*_ record or preview a video.
    * I can not start my camera using any other application such as but not limited to; MSN Live Messenger, Skype, Mozilla Firefox, Internet Explorer and Safar.
    * I have downloaded and isntalled the latest drivers from the Toshiba website.
    * My laptop is about a week old.
    I'm not sure what more I can do, all I want is for the webcam to work, if anyone can help me out please do so.
    And if possible WITHOUT having to reinstall Windows Vista Home Premium.
    I haven't even used it and wouldn't want to make that a solution for all the problems that might occur in the future.
    Sincerely,
    a sad customer.

    Using Camera Assistance Software provided by Toshiba I can NOT record or preview a video.
    Can you please describe the steps how you try to do this? I must ask you this because it runs well on my notebook. When the recording is finished player opens and you can see recorded movie. It is avi format and at the top of this player you can see the path where the movie is saved.
    Most strange thing for me is that you cannot use it with Skype. Ok for MSN is not the perfect but there is absolutely no problem with Skype. Check the settings and it must work somehow.

  • The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. Please Help!

    The u, j, m and 7 keys on the keyboard are not functioning properly on my macbook air. In its place are a random assortment of keys (Ex - u = "eqrw" or "IOUY"). This randomly happened when logging back in after sleep mode. No liquid damage at all. Please help!

    OK, I fixed the problem by doing a SMC (System Management Controller) reset as follows:
    1. Powered off my MacBook and removed everything connected except for the power chord.
    2. When powered off, I held "Shift" + "ctrl" + "Option" + "Power button" for 5 seconds or so until the little light on the front started to blink rapidly.
    3. Powered up my Mac, which took a little longer than usual to start and tested the "missing" keys which now works perfectly again.
    Just added another couple of years usage with my aging mac :-)

  • The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:  "Extensions may not function properly because it does not meet the dependency conditio

    The list of extensions for InDesign now have a yellow triangle warning symbol in front of a good many of the extensions and when moused over i get one of two messages:
    "Extensions may not function properly because it does not meet the dependency condition."
    OR
    Extension Status is not consistent with extension set configuration."
    The reason I opened the Extension Manager in the first place was to check to see if I had installed a third party extension.  And I was presented with these warning symbols.  I haven't added anything, I haven't done anything that would cause this.
    Does anyone know how to fix this???
    I am running OSX 10.9.5; Indesign CS6 version 8.0.2 And Adobe Extension Manager version  6.0.8.28.
    Thanks in advance!
    Nina

    Many InDesign pre-installed extensions (Those extensions you have immediately after InDesign installation) define dependency rules in their mxi files. Dependency means that one extension works well only if one or more other extensions are installed and enabled. If this condition is not met, the yellow triangle warning will be shown.
    You can select an extension with warning, click "Advanced" tag page in the lower right panel. You will see "This extension has dependency on: <extension name> ...". Check whether every extensions listed here are available and enabled. If not, enable them. Repeat these steps for all the extensions which have warning.

  • HT1665 Bluetooth on my IPhone 3GS seems not function properly

    Bluetooth on my IPhone 3GS seems not function properly. How to check and rectify it.

    It would help if you explained what you mean when you say it doesn't function properly. What are you attempting to do? What happens when you try? What troubleshooting steps have you already taken?

  • Why do QTVR interactive images do not function properly or at all?

    QTVR interactive images do not function properly. Check this page out in firefox and then in safari and see the difference.....
    http://www.edfruinphotography.com/MILLCITY_2.html

    I have Safari 5.1.7. I am using Mac Snow Leopard.
    That page is using Flash as well as Quicktime. With Firefox, when I drag the cursor, there is no movement until I let go of the button. That makes it very jerky.
    You could try disabling hardware acceleration and see if that works better with Firefox, in Preferences > Advanced > General.

  • Click and Drag in OS X Yosemite 10.10.3 is not functioning properly on desktop folders

    The click and drag on my Mac 10.10.3 is not functioning properly.  It won't allow me to click and drag folders on desktop or dropping them into emails.  Thought I looked every where for solution....... Any input would be appreciated.....Thanks! 

    Select
              View ▹ Show View Options
    from the Finder menu bar. In the dialog that opens, select
              Sort by: None

  • Why are my firefox icons and tabs not functioning properly?

    My firefox is not functioning properly since Monday. I have tried uninstalling and installing firefox but the problem is still there when I open it. Please help.

    Unfortunately, the most likely explanation is an incompatibility with your graphics card/chipset driver software. One of the effects of Safe Mode is to disable Firefox from using hardware acceleration. To turn that feature off in normal mode as well:
    "3-bar" menu button (or Tools menu) > Options > Advanced
    On the "General" mini-tab, uncheck the box for "Use hardware acceleration when available"
    This takes effect the next time you exit Firefox and start it up again. Any difference?

  • Dreamweaver CS4 Code Coloring not updating

    Hi,
    Recently, when trying to edit the code coloring in Dreamweaver CS4, it will not update the colors after I hit "ok." Anyone know why this might be? I've tried restarting Dreamweaver, clearing the cache, and even seeing if it would work on new documents but none of that helps. Thanks for any help!
    - Matt

    Are you sure you're changing colors for you open document ?
    I have issue with coloring too, but I thought after all this time CS5 will finally have Save option for exactly this issue. So I don't have to repeat this over and over again.

  • My iPad is not functioning properly, I want to restore it. but I'm unsure if my Minecraft world will be saved in the backup

    My iPad is not functioning properly, I want to restore it. but I'm unsure if my Minecraft world will be saved in the backup. Please help, I need to use it ASAP

    How to BackUp
    http://support.apple.com/kb/ht1766
    See iTunes will backup the following Information  Here...
    http://support.apple.com/kb/HT4946

  • Cropping tool does not function properly in Photoshop CS3

    Cropping tool does not function properly in Photoshop CS3. Always crops to .004" x .004". Tried reinstall with no luck. Any fixes out there?

    Reset the tool by right-clicking on the crop tool drop-down/fly-out menu in the top options bar (big crop tool icon above the tools panel, when the crop tool is selected). Be sure to check there aren't values in the crop tool by hitting the clear button in the options bar.

  • HT4623 The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back to the main iPad screen.  Any suggestions on how to fix this - all software has been updated to iOS 5.1.1 and no other updates are

    The APP application on my iPad does not function properly - any downloads requested immediately fail and send me back tot he main iPad screen.  Any suggestions on to hoe to fix this?  The software has been updated to iOS 5.1.1, and no furthe updates are available.

    This is my boilerplate response when app downloads are stalled or in the "waiting" mode. There are a bunch of things here to try.
    Tap on the "installing" icon and see if you can pause the install, then tap on it again in order to resume the install.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
    Make sure that you do not have a stalled download in iTunes - a song or podcast .... if you have a download in there that did not finish, complete that one first. Only one thing can download and install at a time on the iPad so that could be what is causing the problem.
    If that doesn't work - sign out of your account, restart the iPad and then sign in again.
    Settings>iTunes & App Store>Apple ID. Tap your ID and sign out. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
    Go back to Settings>iTunes & App Store>Sign in and see if the install resumes.
    If all else fails, download the updates or the apps in iTunes on your computer and then sync the content to your iPad.

  • One or more of cells in the battery are not functioning properly?

    one or more of cells in the battery are not functioning properly
    I assume this means I need a new battery?  This was the message I got when I did the battery check.  
    The battery will not charge.  Laptop just runs on AC power and battery is in but will not charge.  What happens that causes cells in battery to not work?  I did leave it off a few months.  Would take make the battery go bad?
    Thanks for any info you can give me.  Have a HP G60-230US Notebook PC

    Hello dlriowa,
    Take a look at this document and let me know if it helps to resolve your issue.
    Good luck!
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • TS1702 I am using iPad 3, today I upgraded it to iOS 6 however after updating a particular application is not functioning properly. it's Candy Shoot, need help in playing that game

    I am currently using iPad 3, and upgraded it to ios6 today. However after updating the software e a particular game Candy Shoot is not functioning properly. Please suggest how to get it solved

    thanks, but can you tell me how do I get in touch with the app development team?

Maybe you are looking for

  • Mac OS X Won't Boot Up

    Ever since I have installed the new Yamaha Pro Audio network driver, http://www.yamahaproaudio.com/downloads/firmsoft/network_driver/networkmidi.html My Mac won't boot up, when I turn it on, it is stuck at a violent apple/"do not" icon strobe. See th

  • Case Statement in Select Statement - Oracle 8.0.6

    I am trying to do the following, but am getting error - "FROM keyword not found where expected" select s.item, s.dest, s.qty , case when s.dest = 'x' then (sales - returns) else 0 end from table1 s Is this an error or is it because of the version of

  • Having trouble connecting ipad to computer

    having trouble connecting ipad to commputer

  • Audio note in whatsapp is too low

    i have a problem with my audio notes in whats app, when i receive an audio note i can open it but i can barely hear what is playing the sound is too low

  • Recommend me a good video player (and help with GVim!)

    How can I replace these seamlessly? Totem -> some kind of decent gstreamer video player (suggestions?) Gedit -> GVim