Dreamweaver CS4 MacOS X dialog boxes are displaying the wrong font

Just installed a free font I needed to use for a graphic design project. Opened up Dreamweaver to do a different project and found that all the text in the dialog box was being displayed in this font.
This is pretty maddening to look at - how do I change it back?

Er, uninstall the font?
Installing a new font should not do that to Dreamweaver. It sounds as though you have overwritten a system font.

Similar Messages

Indd CS4 save/export Dialog Boxes are so small :(

I have a 24" iMac and now have installed Indesign CS4. The save/place/export dialog boxes are so small. I have dragged them larger and that is great.
But it does not stay that way across the program or even the same document...
I don't know if I did something different on CS3 but once I set it, it seemed to always remember the setting even on new documents.

I can't help but I can confirm I'm getting the same problems in the CS4 apps, not just InDesign (with Leopard 10.5.5). I hope a fix for this comes out eventually. As Mike says, it happens with Save, Save As, Print To Postscript etc so I encounter it at least a hundred times a day. Very frustrating.

Acrobat X displaying the wrong font

I've been using Acrobat X for a few weeks. The other day it installed an update. Since then my documents aren't displaying the font used by the orginal Office 2010 documents.
If I create the PDF from Office 2010 by selecting "save as Adobe PDF" from Word or Excel file menu then Acrobat X renders it using Adobe Serif MM instead of Times New Roman. It seems like a close enough match.
If I create the PDF in Office using "save as" and choose the PDF file type then Acrobat X will substite Adobe Sans MM for Times New Roman,
If I send this to a person who is using Acrobat 9 it is being displayed as Times New Roman.
Does anyone know how I can make this work? We have a lot of pdf documents that were created using Office 2007 & 2010.

Hi Louis,
If I understand you correctly, you are saying that problem started with updating Acrobat 10.0.1 to 10.0.2 and it is there in both Save as "PDF" and Save as "Adobe PDF"
With Save as Adobe PDF, you see Adobe Serif MM font and
With Save as PDF, you see Adobe Sans MM font.
where the actual font is TimeNewRoman.
Am I correct?
Also when you say that "If I send this to a person who is using Acrobat 9" do you mean that you are sending above Acrobat 10.0.2 created PDF to a person who will view this in Acrobat 9? And there this PDF shows correct font. Please correct me if I am wrong.
I tried this for a sample file with Acrobat 10.0.2+Office 2010 Pro Plus+Win7 SP1 but couldn't able to reproduce. So based on above queries we will investigate it more. If possible please share your source file also (you can upload it on acrobat.com)
Thanks,
Vishal Gupta

OCR-B displays the wrong font

New Mac Mini OS-X 10.9.4
Pages 4.3 and 5.2
OCR-B-10 BT Bitstream TrueType
TT0646Z_.TTF
My license for OCR-B (Optical Character Recognition) font fails in Pages 5.2.
The top illustration is what it's supposed to look like (Pages 4.3) and
the bottom illustration is what happens in 5.2. One is not a variant of the other.
They're different fonts.
http://kozco.com/fonts/OCR-B-Problem.png
Photoshop recognizes the correct font as does Pages 4.3. Pages 5.2 and
oddly TextEdit get it wrong. What's up?
Greg Kozikowski
Los Angeles

The saying is 'The quick brown fox jumps over the lazy dog'.
By reversing the animals, you can get the whole alphabet into a coherent sentence of only 32 characters. Drop one "the" and the plural of fox is foxes, but the plural of dog is dogs saving one "e". There are other, shorter versions, but the torture factor goes way up - I think one version features latin - and they're not based on the common phrase.
Koz

Modeless Dialog Box Not Displaying Contents

I have created a simple modeless dialog box. Although the dialog box and title appear, the contents (a label) do not appear. The dialog box does display correctly if the dialog box is switched to a modal box.
I got into this problem because I also cannot get labels to change after their initial display on the main frame. I've tried repaint() and Thread.sleep().
Please help me, I am a newbie to Java.
Sincerely,
John

I actually had a similar problem with a JDialog containing only a progress bar, which ended up being a problem with Swing rather than my code (the bug report has already been filed). Adding a second component to the dialog fixed the problem, counterintuitive as that seems. Try it and see if that helps... If the label is a JLabel, you might try calling revalidate() on it to get the text to update.
Ian

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

I can no longer print to the 3 Canon printers on my local area network. The print dialog box states that the print file is accepted and the job is printing, but the files never print. Everything worked when the computer and printers were initially set up.

There may be some security issues related to the USPS PDFs.
http://www.certified-mail-envelopes.com/signatures-usps-certified-mail-return-receipt-requested
I can't help with the scan/print problem. You seem to have done everything I would try.
I don't know if maybe using a registry cleaner would help.
John Hoffman
Conway, NH
1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

How to handle the button "cancel" in a dialog box for displaying views?

Hello!
I ve a question about handling the cancel button in a dialog box for displaying views.
I ve already implemented the dialog box by using the following code:
METHOD eh_onnewqact.
DATA stitle TYPE string.
IF m_popup IS BOUND.
    stitle = cl_bsp_runtime=>get_otr_text( alias = 'ZCC_ICRM/NEW_TASK' )."cl_wd_utilities=>get_otr_text_by_alias( 'ZCC_ICRM/NEW_TASK' ).
    m_popup = comp_controller->window_manager->create_popup(
      iv_interface_view_name = 'ZCC_POPUP_NEWBT/NewQActWindow'
      iv_usage_name = 'CUNewQAct'
      iv_title = stitle
    CALL METHOD m_popup->set_on_close_event
      EXPORTING
        iv_view       = me
        iv_event_name = 'NEWQACT_POPUP_CLOSED'.
ENDIF.
m_popup->open( ).
ENDMETHOD.
My dialog box consists two buttons - cancel and create.
The cancel buttons should close the popup and the create button should create an entity of a specified object. but let us come to the cancel button. I did´nt find any information about implementing an cancel button. So, how should I implement it? I thougt
me->close( ). But that didnt works!
Could u give me further information about that, because my cancel event-handler is empty?
method EH_ONCANCEL_QACT.
endmethod.
After that I would know how my calling view could know that the user pushes the Create Button and how the data of 2 inputfields of the dialog box finds their way to the calling view in order to process this data there?
Thank you very much!

Hi Michael,
thank you for your advice! This problem is solved...
...but I have another issue. Ive implemented 2 editable fields in my popup. The user should fill that fields with context and that context should be processed in the calling view of my popup.
My question is how to transfer these information from my popup to my calling view or method?
I tried the following...
      lv_context_node ?= m_popup->get_context_node( 'QUICKACT' ).
      IF lv_context_node IS NOT INITIAL.
        lv_text = lv_context_node->get_date( attribute_path = '' ).
      ENDIF.
But it doesnt work! The context node object is always empty/initial.
Thank you!
PS: Another possibility could be that the object / node of the calling view is transferred to the pop-up in order to process it there.
Edited by: Marcus Findeisen on Feb 22, 2011 12:13 PM

Portal 7.3 masthead customization - How to remove Logoff dialog box "Are you sure you want to logoff?"

Portal 7.3 masthead customization - How to remove Logoff dialog box "Are you sure you want to logoff?"
I have recently upgraded our portal to 7.3 sps10 and we are using the Ajax framework
I have a requirement to Remove the Logoff Dialog box "Are you sure you want to logoff?"
I am able to Import masthead.war into NWDS and get the project ready for development with the appropriate jar and libraries.
I am able to deploy the project also. I need help finding How to turn this dialog box off and just log the user off. I was able to accomplish this in Classic frame work page HeaderiView.jsp.
I have looked at afpmasthead.org.sj and masthead.jsp. I am not a js/jsp developer.
I can see the logoff dialog box being created but I am having trouble finding the logoff code.
Please advise me on the code changes required to remove the Logoff dialog box "Are you sure you want to logoff?" from the Ajax framework.
Any help on this matter would be greatly appreciated.
Thank you
Sarah

Thank you Troy for your Helpful Threads.
Problem Solution:
Followed the thread on How to download and change AFP Masthead on SAP Portal 7.3
Located the file which contains the logoff code from thread http://scn.sap.com/thread/3265584
The File with the Logoff coding in it is a Javascript file afpmasthead.js
Identified logoff code without dialog box using this thread https://scn.sap.com/thread/3307601
NovaDialogBox.performLogout(); (perform logoff)
I was able to remove the Logoff dialog box Do you really want to logoff? And replace it with logging the user off.
afpmasthead.js All the code is on 1 line, To fix this go to -->Source -->Format
Comment out the following lines of code and replace with logoff code
logoffLinkElement.onmouseup= function(aS) {
logoffLinkElement.onmouseup= function(aS) {
NovaDialogBox.performLogout();
Sarah

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

I just updated to 10.8.4 and my mail program is showing a series of boxes with AAAAs inside them instead of the email addresses. Also when on Safari web pages are displaying the same AAAAAs instead of type. Firefox displays fine. Can someone help me?

Restart your Mac and immediately hold down the Shift key when you hear the startup chime to boot into Safe Mode. Keep holding the Shift key until you see a progress bar towards the bottom of the screen. You can let go of the Shift key at that point.
OS X asks you to log in (you will get this screen on a Safe Mode boot even if your Mac is set to automatically log in). Let the Mac finish booting to the desktop and then restart normally. This will clear Font Book's database and the cache files of the user account you logged into in Safe Mode.
Next, close all running applications. From an administrator account, open the Terminal app and enter the following command. You can also copy/paste it from here into the Terminal window:
sudo atsutil databases -remove
Terminal will then ask for your admin password. As you type, it will not show anything, so be sure to enter it correctly.
This removes all font cache files. Both for the system and the current user font cache files. After running the command, close Terminal and immediately restart your Mac.

HT204291 I cannot stream TV Shows stored on iTunes from Mac to Apple Tv - Checkered Boxes are displaying

I Cannot stream my TV shows to be played from MAC BOOK Air to Apple TV using Mirror Airplay, Checkered Boxes are displaying instead.

Welcome to the Apple Community.
Which application are you using to watch the TV shows.

System dialog boxes are in Franglais - help!

I have noticed that over the past few weeks software installation dialog boxes are in a mixture of French and English. In researching this I have discovered that it is not just software installation: for example if I click the padlock to authenticate in Users and Groups, it says "System Preferences essaie de déverrouiller les préférences Utilisateurs et groupes. Type your password to allow this." I have tried resetting the language to English in Terminal and enabling the root user in order to check that it too was set to English. This is all I could find in the forum. What else is there to do?

More people have reported the problem. Read > https://discussions.apple.com/message/21687010#21687010

Is there dialog box are available in final release?

is there dialog box are available in final release?

You can make your own to some extent by borrowing an old web approach where you just overlay your panels so the front one (the 'dialog') is over the top of your content. You have to roll your own glasspane, close buttons, etc (but on the plus side they are then easy to style) and also it's not a true popup so if your dialog doesn't fit in the containing window it will not float outside of it.
See the code in this post for some more info: Effect that Will Darken a Node and all its children
On a stylistic front, I would also suggest only using dialogs for very small popup-style questions and avoid them for anything major. In my opinion the web has shown us that simpler is better - just go to a new 'page' (i.e. replace the main content of your view) if your 'dialog' is more complex and allow them to tab or 'forward/back' between each view. Swing was a far superior and more powerful UI technology than html/web ever was or ever could be and yet HTML knocked us out of the water by being very simple for users and also pretty-out-of-the-box. There's some lessons for us Java desktop developers there as JFX2 ushers us into the modern development eco-system. :)
Cheers,
zonski
Did you find this answer useful? If so, please mark as 'Correct' or 'Helpful'.

I need help - Open windows and dialog boxes are ghosting and flashing.

Hi All,
My Mac Pro has recently come down with a "bug". When i open multiple windows they don't seem to cope well with each other and parts of the window behind will still show through the window in front in fragments. When downloading, the loading bar will also flicker and partly show the dialog box behind. The only thing that fixes the broken up windows/dialog boxes is to minimize then maximize again. At first i thought it was a memory issue but the problem occurs with no applications running except for finder. I have done several restarts, updated my software and have checked my hard drive in disk utility and everything appears okay?
I can still operate the machine but it's getting a little annoying. Can anyone help me here?

Hi nayefo,
Try installing multitouch, and then see, while in windows, if you've successfully installed multitouch and multitouch mouse, you should have those drivers. Also check if you've installed trackpad and trackpad enabler.
Cheers,
Erik

Where do I find the printer dialog box to change the setting that asks me to save a file before printing

Where do I find the printer dialog box to change the setting that asks me to save a file before printing

Hi Sara,
The problem is every time I try to copy a page from a website or attachment sent to me or anything that I don't create, the dialog box says I have to save it before I can print -- there are no other options on the dialog box. Very frustrating -- one of the girls in my office is having the same problem and we can't find a way around it.
Hope you can help
Thanks
Carol Laskos
"Sara.Forsberg" <[email protected]> wrote:
Sara.Forsberg created the discussion
"Where do I find the printer dialog box to change the setting that asks me to save a file before printing"
To view the discussion, visit: https://forums.adobe.com/message/7070517#7070517
>

When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified

When I attempt to send a text from the new iPad, a dialog box appears with the option to either sign in with Apple ID Password or Create New Account. I try signing in using my Apple ID password but IMessage informs me that email address cannot be verified because it is already in use ??? What am I doing wrong?

settings -> iTunes & App Store
click on apple ID listed there
select Sign Out
sign in with the proper account
from then on, when the store ask for your password it should be with the correct ID

Dreamweaver CS4 MacOS X dialog boxes are displaying the wrong font

Similar Messages

Maybe you are looking for