Dreamweaver CS4 on Win7x64 only starts once per session

Hello.
I use DW only occasionally so I didn't notice that whenever I exit DW I am unable to restart it during the same windows session.  If I try to open it a second time, nothing happens.  However, if I log off as a windows user and then log back in, I can run DW again (but only once).
Does anyone else have this problem on windows 7 64 bit ?  Is there a work around ?
If it matters, my version is 10.0 build 4117.

Ok.  While trolling thru other posts, someone asked about using different compatibility settings.
So, ..... I right clicked my desktop icon to start Dreamweaver and selected Troubleshoot compatibility.
During the windows wizard that runs, I eventually established the successful compatibility settings "Compatibility mode: Windows Vista Service Pack 2"  and "User Account Control: run as Administrator".
After saving these settings, I am now able to run DW multiple times without any problems.
I will be interested to see if I do not experience the other Windows 7 problems I see in the forum postings.
Compatibility settings may be a way to avoid these issues.

Similar Messages

  • ITunes 7&8 will only start once per install on Vista 64-bit.

    This problem has been going on for quite awhile (but not always). iTunes works great immediately after install and will play and run forever until closed. Once closed iTunes no longer will start (even after restarting computer) until completely uninstalled and re-installed. Repairing does not fix it. This happens with iTunes 7 and the newly released 8.
    Any ideas?
    Thanks.

    I've tried that several times now. It's a brand new computer, never had iTunes on it before, and I get the same issue. I even used restore discs to restore the computer. I tried running the install program straight from the web site, downloading the program and running it from my hard drive... I'm fresh out of ideas. I just keep getting the same "errors were encountered during installation" generic message.

  • PCMICA Media Card Reader only mounts once per session

    After I restart and insert my PCMICA media card reader will show up on the desktop but only once. After I eject the card and reinstall it will not show up on the desktop. The card appears in the menu bar but no where else not on the desktop or in a finder sidebar. It acts like it is permanently ejected. The only solution is to restart which is time consuming during a photo-shoot (Sleep/Wake and Finder Relaunch do not solve this). I have two media card readers one for CF cards and a 4in1 for smaller cards. Both act in the same way and once one has been ejected the other wont mount as well. Both cards worked fine in system 10.3.9. System log does not show any difference in loading when it mounts and when it doesn't.

    Well, I tried the hardware test and now we know it is a software problem(hardware checks out fine).
    I checked out the Delkin website. That was disappointing. Looks like I need to buy more hardware to solve this one. Worse yet if I spend the $100 for two cards they wont work in my next laptop as I plan to get a MacBook as soon as PhotoShop is Intel ready.
    So now the question is what do I do with this growing mountain of unusable peripherals. My business is small but we've bought a lot of macs. Close to 50 now. We had a few before Y2K and just before we replace all the PCs with iMacs and G4's. System 8.6 was great and every printer and reader and camera and scanner and external storage device (some going back to 1989) worked great. Now that we have "upgraded" the software so we can do really complicated things like properly viewing web pages and send authorized email nothing works right. I have faxes (Apple 56k in a G4) that can't detect detect dial tone when faxing but can connect to the internet as a modem. Printers that print fine in TextEdit (PS fonts and all) but can't print out of Excel. Dont even get me started about fonts. The list keeps growing and the only answer I hear is to replace perfectly good hardware with new stuff. Then when I do I find the software wont work. (I had to use a old laptop with 10.3 to run the latest software from Version to set up a friends home DSL.) I need to get out of this loop it is costing more than it's worth.

  • How to float a landing page to capture email address, only shown once per visitor to the site, and not on return visits?

    I would like to float a landing page to capture email addresses, that is only shown once per visitor to the site, and not on return visits OR after they submit their email not to be asked again.
    thanks guys!

    Hi Scott,
    Thanks a lot for the advice.
    Actually I added user names to the apex_access_control table and assigned each user the desired privilege but did not notice that I should do the following setting.
    *Access Control Administration > [RUN] > Set Application Mode: Restricted access.*
    Thanks,
    Guy

  • Public and Authenticated App with Authorization Scheme once per session

    I have a question . . .
    Let's say I have an application and at the application level I have an authorization scheme (auth1). If auth1 is set up to evaluate once per session, does it authenticate for the public user, then pass me back to the page and then check then evaluate the auth1 scheme. Or does it evaluate the auth1 scheme, then log in, then return to the page. Is it the same regardless of authentication scheme (e.g. Oracle SSO).
    It may make a big difference. If the authorization sheme is based upon the user (most will be) then setting it to evaluate once per session can be a real problem. If it evaluates before the user logs in, then it won't really work.
    This is an even bigger question when the application does not have a authorization scheme at the application level and allows public pages. If a page that is not public has an authorization scheme set, and the user goes directly to that page, it seems to authenticate the authorization scheme and then logs you in, but does not re-evaluate authorization scheme after you are logged in. Is this accurate? I realize that I could set it up to evaluate for every page view, but I really only need it once after login.
    Is this clear?

    Anton,
    It seems that all authorization schemes that are set to evaluate once per session are evaluated with the beginning establishment of a session.Sort of correct. Authorization schemes don't get evaluated until the component that uses them is considered for rendering or processing. So if the authorization scheme is attached to a page, it won't fire until the page is requested. If another component uses that scheme first, the evaluation will happen then and will not happen again during the session.
    What if I have another page that is not public. If it is the first page I go to, what happens. Obviously, I get redirected to login, then login. Do the authorization schemes get evaluated at this point?Yes, assuming the authorization scheme is used by the page, the scheme is evaluated during the first rendering or processing of the page in the session, after the authentication step.
    Now, what if I have a page that is public, but also has an auth scheme (odd, but could happen). Now what happens, does the auth scheme get evaluated before or after login?During the rendering or processing of the page after the authentication step. For a public page, the authentication step is performed up to the point where it determines that no authentication is required.
    OK, now let's add in Application level auth scheme. I can have public or private pages. If I go to a private page, when does the app level auth scheme kick in? How about for a public page?When an application uses an authorization scheme, it gets evaluated before the authorization scheme (if any) for the page that is being requested, so the public/private property of the page doesn't matter.
    General advice: when an authorization scheme uses :APP_USER, it doesn't work well to have it fire once per session because it'll get run before authentication to the application occurs, which sets APP_USER. You can have such schemes fire once per page view and for PL/SQL function-type schemes, have them give a "pass" when the current page is the login page, that kind of thing.
    In addition, if the overhead of running a scheme is high, one can set an application-level item to indicate that a once-per-page scheme has already run satisfactorily. The PL/SQL-type schemes can access the value of such an item to skip the expensive part of the evaluation and return true immediately.
    Finally, the htmldb_application.reset_security_check API can be called in order to reset the "fired" status of all authorization schemes in the session, allowing them to be re-evaluated if/when they are encountered again in the session.
    Hope this helps,
    Scott

  • Once per session, connected anyway

    I have an authentication scheme that is set to once per session. The users are defined in oid and have to logon using sso.
    So far so good. But in following scenario it goes wrong.
    1. User enters the htmldb url
    2. User gets the logon screen from sso
    3. User logs in and is than forwarded to the application where the authorisation scheme says him he has no access and he is redirected to a public page that tells him this.
    4. the user presses the 'Back' key on the browser, so he gets the login screen again.
    5. he enters again his username and password, and enters.
    -> now he is logged in and gets the screen he is not allowed to.
    What goes wrong here? Why does the session not remember that this user has no access ?
    Grtz,
    Chris.

    Scott,
    The solution of htmldb_util.reset_authorizations works fine. But in the end we choose another option.
    We are using the error page now to display wether the user has no access to the application. It looks like the user has access to the error pag even if he has no access to any of the application pages. Now it works fine.
    Now the authorization also returns false.
    Tnx for the replies,
    Chris.

  • Sort by columns once per session

    Hi there, I am using apex 3.1 and I have a report generated by a pl/sql function. There are several columns on which the user might sort. Is it possible to reset the sorting preferences when the user logs in? (like: a process running once per session?)
    thx in advance
    Edited by: 814932 on 23-Nov-2010 08:00

    You can use the <tt>apex_util.remove_sort_preferences</tt> method (although it is a bit of a blunt instrument). See the Admin guide for more information on user preferences.
    To run it once per session, code the call as an Application Process with execution point On New Session After Authentication.

  • How to customize Dreamweaver CS4 to follow only HTML 4.0 standards

    While writing a code I realize that Dreamweaver will compile it as I write But is any option in Dreamweaver to check the code source according to any specific and precise Web Standards like HTML 4.0 or HTML 5.0? I have a dispute with software developers from Itransition that this is possible to code only in any certain specific way with the help of Dreamweaver.

    Hi
    You can set the code 'standard' in the preferences / new document.
    However nothing in Dreamweaver is 'compiled' or is required to be for the web, unless you are writing 'custom' server side extensions for the server side language but this would be written in C not a server side language.
    PZ
    www.pziecina.com

  • Firefox will only open once per login

    This started acting up i think around when i updated firefox when i was opening it. It only allows me to have one firefox window open. The tabs work find but i can't move tags to new windows, can't get on chat sites cause they require another window to open and i have to restart my computer if i close firefox window. I've cleared the cookies on here but doesn't seem to help.

    You can make a copy of the Firefox desktop shortcut and open the Properties of that shortcut via the right-click context menu.
    You can add a space and the "-new-window about:blank" text without quotes to the current command (target) line to open the about:blank in a new window if you use that desktop shortcut to launch Firefox.
    Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Creating a profile":
    *https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
    *http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
    If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • With a document open password - is there a way to ask only once per session?

    Here's my scenario:  User is reading a "password to open" document that contains links to other web pages, etc.  The user clicks on a link, goes to the new page, then uses the back button/back key to return to the password protected document, where they must type in the password to open again, and must do this every time they click a link then later attempt to return to the document. 
    Is there a way around the repeated retyping / reentering / rekeying the password?  (My guess is no, but I'll ask anyway).  The user did type in their password, most of the time just a minute or two earlier, before they clicked on the link in the password protected document. 
    P.S. I have a couple other questions, indirectly related (byproducts) to this general topic.  I'll post those in their appropriate forum, then edit this post with links to those posts.  FYI, the other posts are/will be:
    Is there a better way than manually adjusting each and every link in a document to use javascript and repeating that process each time the document is updated, to make links open in new windows, (when viewing a pdf from within a browser window).  [Edit:  here's that link:  http://forums.adobe.com/message/5055202#5055202 ]
    Is there a way from an html page or from something within a PDF document (at the discretion of the document's author) to open a pdf in the acrobat reader window instead of in the browser, without asking each user to change their reader settings?  [Edit:  I ended up asking this question in the same post listed above]

    Once the instance of Acrobat or Reader containing a password-protected PDF file has been closed, you can't avoid having to re-enter the password. If the links don't target a new tab or window, then the browser will unload the plugin - and aside from changing all the link targets, you can't prevent that.

  • The 'DbProviderFactories' section can only appear once per config file. (System.Configuration)

    Hi I have installed just the enterprise manager, and client connectivity tools on my workstation. When I try to do something in Enterprise manager like create a new view I get the error in the Title line. I have checked and double checked the section mentioned
    in the machine.config files in the .NET framework config folder for version 2 and 4 both 32 and 64 bit and can find no "doubled section" further more I have compared the files to machines that are working correctly and the sections are the same.
    I have uninstalled and reinstalled with no luck, same error. I also get the same error if I try to use the SQL tools within visual studio. I need to get this fixed. None of my searches have turned up anything except the machine.config file.
    Note I also have SQL 2005 tools installed on this machine as well as SQL 2008 Express.
    Lee

    Hello,
    Have you examined the Machine.Config for all .NET Framework folders?
    C:\Windows\Microsoft.NET\Framework\XXXXXX\Config
    Where XXXXXX is a different .NET Framework version.
    Remove any empty entry for DbProviderFactories.
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Applet load once per session

    Hello All,
    I make a simple application has only 2 jsf pages(page1.jsp and page2.jsp) and I make a page template.
    in page template I put an applet as chatting applet. when I run page1.jsp the page is open and I found the applet but when I navigate to page2.jsp applet will reload again.
    I want when user open application the applet will load only once. if user navigate between pages I want this applet not reload again.
    How can I make this?
    I use JDeveloper 11.1.1.4.0
    Regards,

    Hi,
    Applets are implemented through an Applet tag on a page. If the page loads, an instance of the applet is created. In your case, you dismiss a page and the re-load it again. I am not sure what you are trying to do will work, but you can give partial navigation a try:
    http://docs.oracle.com/cd/E23943_01/web.1111/b31973/ap_config.htm#sthref409
    use onWithForcePPR
    This will perform navigation using an implicit iframe. Chances are that the template doesn't change and the applet thus stays. If this doesn't work then I think you need to work on a new strategy for setting up your chat application
    Frank

  • Browser does not seem to prompt for more than once per session, to accept untrusted sites. I have to close/open firefox to visit multiple untrusted sites in one sitting. Is there a way to fix?

    I use firefox to connect to the console of different Sun/Oracle servers. The www pages are "untrusted" and I get a question to continue to connect or not. When I say continue, it pops up a window to either accept or deny the cert. This window, once I accept it, to continue to do my work. When I'm finished with that server and continue to another one, that window no longer pops up for me when another untrusted www page is loaded. But when I quit firefox, and then revisit the page, the dialogue pops up and I can accept the new cert and continue to work.
    I'm considering going back to the older version of firefox as this is severely impacting my day to day use of it. I'm still trying to see if I can get around it by fiddling with different firefox options.

    Thanks. I tested it, and found that I can create a bookmark in FolderA, and them manually copy it to FolderB, FolderC, and FolderD.
    Once that is done, I tried the old method of "Bookmarks" --> "Bookmark This Page" and added it to FolderE. When I did that, it deleted the copy in FolderD but left the other three alone!
    This is fine with me. I personally think this is a bug, because I don't think that Firefox should ever delete a bookmark without asking me (or at least, informing me). But now that I understand the algorithm, I can work around it. Thanks!

  • My rMBP HDMI display cuts out once per session

    I have a rMBP (15 inch) that I use mostly with the lid closed and connected to dual monitors, (both identical ASUS monitors with HDMI and DVI-D connections).  I use the Thunderbolt DVI-D adapter and a HDMI cable.  When either running Windows 7 via Bootcamp or using Mountain Lion, the HDMI connection goes dark for about 3-5 seconds when I first start using the computer, then the picture reappears.  The DVI-D connection is not affected.
    All software updates are current and I've switched monitors and cables to no avail.  Has anyone else encountered this issue?

    Thanks. We are using the same setup the salesman sad he had at home: Mac Mini as media server with TV as monitor. We bought the server, not for the services, rather for the two 500GB drives. We let the default services run when we first set it up. I suppose I could shut everything non-essential down and see what happens.
    I finally isolated the problem to today to either the HDMI cable, the miniDVI-to-HDMI adapter, or the Mac Mini itself. I would love for it to be just the adapter. Funny thing is the guy who sold us the system didn't know an adapter came with it so he sold us another one--which we promptly took back. Blergh!
    This was supposed to be an easy migration. Imagine the naivete!
    -starkravingchad

  • Start systemd --user once after first login, not per session?

    Hey guys,
    So I've been toying around with using systemd to manage user daemons and some oneshot processes, it seems like it could be really nice
    Here's what I'm thinking I would like to do:
    I would have two user targets, `console.target` and `graphical.target`.
    The console target will start things like pulseaudio, ssh-agent (envoy), transmission, stuff like that.
    The graphical target will start xorg and then other things like the WM, set the wallpaper.. you get the idea. Obviously the graphical target will want the console target.
    Now, the part I wanted to get some feedback on is this: I would like a systemd --user instance to only be started once after my first login, not once per session.
    So for example, I login from vt1 and it brings systemd --user up to the graphical.target. Then if I later SSH in from somewhere, it won't start a new systemd --user session (Ie, won't start pulse-audio, transmission-daemon, etc).
    However, if I haven't logged into my machine yet and I SSH in, it will start up systemd --user and will start the console.target. If I then later login via vt1 it will see that there's already a systemd --user session started and start the graphical.target
    Does this make sense? Is it a bad idea?

    You could make a column in the database, and when the
    information is set (emailed) make the value to be 0, then when they
    first register use a IF recodset("column_name") = 0 Then
    reponse.redirect("filloutpage.asp") end if, then when they fill out
    the info have a hidden form field thats updates the value to 1. on
    the login page after the first if make another IF
    recordset("column_name") = 1 Then response.redirect("index.asp")
    end if.
    i have forms that have three different redirect based on user
    input, and you could do the same thing you could add the one for
    the first time to dw made code, here is an example, you could
    change the request.form to a recordset value and it will work.
    If Request.Form("select") = "Self" Then
    MM_editRedirectUrl = "FridaySchedule.asp"
    Response.Redirect(MM_editRedirectUrl)
    End IF
    If Session("MM_AdminEdit") = "True" Then
    MM_editRedirectUrl = "FridayScheduleAdmin.asp"
    Response.Redirect(MM_editRedirectUrl)
    End IF
    MM_editRedirectUrl = "FridayScheduleDept.asp"
    If (Request.QueryString <> "") Then
    If (InStr(1, MM_editRedirectUrl, "?", vbTextCompare) = 0)
    Then
    MM_editRedirectUrl = MM_editRedirectUrl & "?" &
    Request.QueryString
    Else
    MM_editRedirectUrl = MM_editRedirectUrl & "&" &
    Request.QueryString
    End If
    End If
    Response.Redirect(MM_editRedirectUrl)

Maybe you are looking for