Dreamweaver cs5 does not show part of the properties tools...
Hello Everyone,
Dreamweaver cs5 does not show part of the properties tools on the bottom of the page, i.e. on HTML : TITLE and TARGET and on CSS: BOLD, ITALIC and PARAGRAPHS sections.
I have DW CS5 and WIN 7 Home Premium 64 bit, I have uninstalled and reinstalled several times but no luck, I tried to clean through regedit still no show.
I have onother computer installed same DW CS5 works OK.
Is there any folders keeping the old DW CS5 files or how can I uninstall all the traces complete DW CS5.
Thank you in advance
Denis
Make sure your settings are set to 96 dpi, for the font.
desktop right click
personalize
change to default 96 dpi
you will be good to go
Similar Messages
-
Dreamweaver Design view does not show parts of the page
Hello all,
I was working on a page update - page was created using a
template so
that the client can add content with Contribute - and have
discovered
that suddenly whole sections of the page are no longer
visible in Design
Mode. This caused me some panic until I viewed in code view
and found
everything still in there. Viewing in browser shows the page
there in
entirety too, and uploads just fine. But no matter what I do
- restart
the program, restart the computer - nothing changes, the page
design
does not show parts of this page. Everything is in an
editable area and
should be visible.
I have been editing the code as that was my only option, but
now I have
heard that my client cannot view those sections of the page
in her
Contribute either.
The page is here:
http://www.craft-design.ns.ca
Any help would be gratefully received.
Thanks
Ellie> (I find it strange that it is now like this, as I
understood that th was
> depracated? So I went through and removed them all.)
<th> deprecated? Certainly not.
> There are editable regions in the page as it has been
working for the past
> year and a half. I find that after an amount of editing
by Contribute
> users, the pages do tend to fall apart.
Normal template files have two editable regions in the head
of the page -
doctitle, and head
The one you linked does not.
That's what I was talking about.
> Contribute sounds a great thing, but is a huge pain and
ends up costing me
> money fixing the messes my clients end up making, though
this should not
> be possible...
I have stopped recommending it to my clients.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Ellie" <[email protected]> wrote in message
news:[email protected]...
> Thanks Murray,
>
> I see all this.
>
> (I find it strange that it is now like this, as I
understood that th was
> depracated? So I went through and removed them all.)
>
> There are editable regions in the page as it has been
working for the past
> year and a half. I find that after an amount of editing
by Contribute
> users, the pages do tend to fall apart.
>
> I will have to remake the template and remake the page
from that.
>
> Strange thing is it was working perfectly well before.
>
> Thanks for the help, Murray.
>
> Contribute sounds a great thing, but is a huge pain and
ends up costing me
> money fixing the messes my clients end up making, though
this should not
> be possible...
>
> Ellie
>
> Murray *ACE* wrote:
>
>> You have no editable regions in the head of that
page - why is that?
>>
>> As for the display in DW, perhaps it's the 175
validation errors that the
>> W3C validator finds on the page?
>>
>>
http://validator.w3.org/check?verbose=1&uri=http://www.craft-design.ns.ca/mbg_past_shows.h tml
>>
>> Most of these are serious coding problems....
>>
> -
My photoshop CS5 does not show a tool sidebar as my CS3 does. How do I bring this up?
My photoshop CS5 does not show a tool sidebar as my CS3 does. How do I bring this up?
Window>Workspace>Essentials (Default)
"Window" is a menu title in the Menu Bar. -
I've a new account on iMac. When composing an email the contact list does not show up on the bar, which would allow me to select the persons I want to include on the distribution of the email. When I start keying in a name in the email, it comes up with the person's address, which shows it is synced. How do I engage the contact list from the email like I do on my old account (where a contact list icon shows up, along with the "attach" and other icons) ?
With the New Message window open, go to the View menu and select "Customize Toolbar...".
In the screen that opens, drag the item labelled "Address" into the Toolbar area of the New Message window, then click the "Done" button.
That item should be then added to the Toolbar for the New Message window.
Note that the main Mail window and the New Message window (as well as the separate message window if you open a message that way) use different toolbars - the settings/inclusions for one do not carry over to another. -
Yesterday I reset my settings on my iphone 4 to correct a problem. Today I am unable to connect to itunes to sync my phone. The device does not show up on the screen. What can I do?
Best practices says plug the USB cable into the computer, then plug the 30 pin connector into the iPhone.
If everything is working correctly, you should be able to plug the iPhone in at any time. Before or after opening iTunes.
Depending on what settings are selected in iTunes, the program may or may not automatically open when you connect the device. -
I have an app that does not show up on the left under iTunes. How do I delete it?
I have an app that does not show up on the left under iTunes. How do I delete it from my Iphone 5?
If the icon exists on your screen, just do a long press on that icon and when the small X appears on top of the app, press it and it will delete it. As long as this is not an Apple app, since those cannot be deleted.
-
my itunes in pc fails to secure link with itunes store it shows the process bar it automatically quits the process it also does not shows any on the screen. i am using windows xp service pack 3. what shoul i do?
Diagnostics test
Microsoft Windows XP Professional Service Pack 3 (Build 2600)
ECS G31T-M7
iTunes 10.5.2.11
QuickTime 7.6.9
FairPlay 1.13.37
Apple Application Support 2.1.6
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.97
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0012ABAC07F3CCB0
Current user is an administrator.
The current local date and time is 2011-12-31 14:06:21.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is not supported. (16005)
Video Display Information
Intel(R) G33/G31 Express Chipset Family
**** External Plug-ins Information ****
No external plug-ins installed.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {7599FAD1-1BB9-4AC6-80AF-404253DC519E}
Description: Atheros L2 Fast Ethernet 10/100 Base-T Controller - Packet Scheduler Miniport
IP Address: 192.168.1.5
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Sat Dec 31 13:46:09 2011
Lease Expires: Tue Jan 03 13:46:09 2012
DNS Servers: 192.168.1.1
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was unsuccessful.
The network connection timed out.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-12-31 14:00:02.
**** Device Connectivity Tests ****
iPodService 10.5.2.11 is currently running.
iTunesHelper 10.5.2.11 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
rawkiss’s iPhone, iPhone 3G running firmware version 4.0
Serial Number: 86931UEAY7H
**** Device Sync Tests ****
Sync tests completed successfully.I have found a fix after doing additional research through this forum. Tech Note #328730 addresses this problem and it works for Photoshop Album 3.2 even though it was written for release 1.0.
Here is a link that will take you directly to the Tech Note:
http://kb.adobe.com/selfservice/viewContent.do?externalId=328730
When using this fix the Tech Note indicates:
"Imported image data and tags are lost when you re-create the My Catalog.psa file, so you need to reimport images and reapply any tags"
however it did retain the captions (at least it did for me). -
I am trying to sync my ipad3 to my itunes on a pc laptop, the ipad does not show up in the itunes left hand column. an ipod is already synced to the itunes. any suggestions welcome
Hi lindaasw,
Welcome to the Support Communities!
Do you have the latest version of iTunes for Windows installed? I would turn on the sidebar and the menu bar just to make sure you are seeing everything. If the iPhone is still not recognized in iTunes, follow these troubleshooting steps:
iTunes: Turning on iTunes menus in Windows 8 and 7
http://support.apple.com/kb/HT5610
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
Cheers,
- Judy -
sharing does not show up on the side column ... tried turning off home sharing then turning it back on ... shared shows up untell i click "done " then its gone.
Yes, I have also tried and failed when setting up Home Sharing. I have followed the instruction given on the Support website, but this is all I see:
Both computers are on the same local network and both allow Home Sharing and are signed in with the same user name. I am not sure what else to do. Any suggestions? -
I read the article on how to remove Bing; however, it does not show up on my list of installed programs and it does not show up in the list of extenstions under "Tools" and "Addon" yet it is installed as an extention to the right of the addlress line. It is not my home page. Help!!!
See also:
*https://support.mozilla.com/kb/Removing+the+Search+Helper+Extension+and+Bing+Bar
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Resetting_preferences -
Named Criteria created, but it does not show up in the Data Controls view
Hello there,
I wish to use a data-bound ADF Mobile ListView in one of the pages on the app. However, only entries of the underlying data that fulfill a certain condition shall be displayed in the list. The condition basically is an "Equals" test against a bind variable in the pageFlowScope. Therefore, I have created a corresponding Named Criteria for the data control - proceeded like described here:
https://blogs.oracle.com/adf/entry/create_named_criteria_in_ejb
The Named Criteria, in my case, has been created and saved, yet it does not show up in the Data Controls view of JDeveloper. Therefore, I cannot drag it on a UI element to use it.
I only have the "Operations" folder where the quick guide above also shows a "Named Criteria" folder.
Refreshing or restarting JDeveloper did not solve this.It was all taken care of by Gaurav Aggarwal
He got me all fixed up, Thank you for your concern.
Daniel Walters -
On windows 8.1 charms bar does not show up and the touch functionality is also degraded
upgraded my elitepad 900 to windows 8.1 . after this the charms bar does not show up and the touch functionality is also degraded while playing games. i believe i need the latest synaptics gesture suite. Cannot find it. Please help.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this HERE.
HP ElitePad 900 G1 Tablet Support
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping! -
We have a DVD in the super drive on our Macbook Pro that will not eject. The DVD does not show up on the desktop. Have tried the keyboard eject button, and also restarting the computer. Any ideas on how to eject it?
here is a troubleshooting article from Apple about this: http://support.apple.com/kb/ht2801. Hope this helps
-
I have an iPod Nano that is synced to my mac, but it is sent in for the battery issue. Anyway, I have bought a 2nd gerneration Ipod touch and I want to now sync it to my mac, but it does not show up in the left menu bar. Please help. Thanks All!
http://support.apple.com/kb/TS1591
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again. -
I have just installed a new hard drive in my imac intel 20" (2006) and upgraded the memory and now the hard drive does not show up in the 'select destinations' folder of the install program. I can see the hard drive in the disk utilities window however it wont let me do anything.
It is a seagate 1TB SATA II drive however it is displaying it as a 7.3 TB.
If anyone has any suggestions I would be happy to hear them.
I have tried to erase and partition and get the same error message each time, 'Input/Output error'.
I have tried starting the thing with the install disk which is Mac OS X (Tiger?) which came with the computer. No good.
Anyone?Thats correct. I can see it in the list however when I attempt to erase it or partition it it's like it's not being found or recognised and it throws up the input/output error message. I am pretty sure that the sensor it attached correctly and it is a SATA drive. I can see all the infor regarding the drive when disk utility is open and it all looks good but I cant access it or do anything with it. It's taunting me!
The install disk is in the drive and the install program runs right up to the point where you have to select the location for the install and there is just nothing in the box where you have to select the hard drive icon.
I have my suspiscions about the drive but any help would be appreciated.
Maybe you are looking for
-
How do you 'configure' a Workshop application? The normal way to do this in J2EE is to add environment entries in web.xml, ejb-jar.xml or even application.xml. In Workshop there is only web.xml. And when deploying as an EAR file, it gets packaged in
-
Can't find bean with adf bc sdo web service
Hi, I made a sdo web service with adf bc on the customer table in the oe schema. This works fine, I deployed this on the j2ee container of jdev tp4. Now I use this sdo ws in a entity of an other project bc4j project. I add the jars , update the conne
-
Lightroom 3+ (Mac OSX) Spinning Beach Ball on Import only?
Hello -- When I first starting using Lightroom 3 on my 27" quad-core iMac, detection of an inserted memory card (Compact Flash or SDHC) was instantaneous. It's one of the things that really attracted me to Lightroom -- plug in, and go! Sometime
-
Tenemos una central 2921 y telefonos 3905, cambie la hora en la central y me gustaría saber si hay alguna manera de realizar un reset a dichos teléfonos para que actualicen esa hora, sin necesidad de ir a cada uno de los telefonos a desconectarlos y
-
My hp scanjet 3970 lights up, but how to obtain a scan? I have not used it for some time and, at age 76, I have become a little forgetful. I use Windows 8.1, Firefox, and an ACER laptop. When I turn on the plug for the scanner, the bed of the scanner