Dreamweaver CS5 - Welcome Screen shows CS4!

Hi,
after upgrading Dreamweaver from CS4 to CS5 the welcome screen insists on identifying itself as CS4. What's going on?
Win7 64bit
All updates installed. I also tried re-installing DW CS5 to no avail.
Any suggestions?

CS5 does not actually upgrade CS4.  It just installs a new version alongside CS4.  You could try trashing the prefernces located in the application support folder and restarting DW.  However, only way users here would probably know how to get rid of this is to run the Clean Tool to remove the previous versions, up to and including CS5 and then reinstall CS5.
http://www.adobe.com/support/contact/cs5clean.html

Similar Messages

  • Dreamweaver cs5 does not show part of the properties tools...

    Hello Everyone,
    Dreamweaver cs5 does not show part of the properties tools on the bottom of the page, i.e. on HTML : TITLE and TARGET and on CSS: BOLD, ITALIC and PARAGRAPHS sections.
    I have DW CS5 and WIN 7 Home Premium 64 bit, I have uninstalled and reinstalled several times but no luck, I tried to clean through regedit still no show.
    I have onother computer installed same DW CS5 works OK.
    Is there any folders keeping the old DW CS5 files or how can I uninstall all the traces complete DW CS5.
    Thank you in advance
    Denis

    Make sure your settings are set to 96 dpi, for the font.
    desktop right click
    personalize
    change to default 96 dpi
    you will be good to go

  • Photoshop CS5 Welcome Screen

    Hi all,
    Since installing CS5 Web Premium, the Welcome Sceen does not display and I cannot find how to get it back.
    I like having the Welcome Screen displayed at startup, and normally (all other CS5 programs) to get it back you go to the "Help" menu and select "Welcome Screen", but this is not the case in Photoshop CS5 (at least not with my software).
    Has this been taken away from Photoshop, or has the process to get it to show again changed?

    Photoshop Elements had a Welcome Screen.
    For me Photoshop full version only has a splash screen, but I do not have the full suite.
    -Noel

  • CS5 Welcome Screen

    After installing CS5, the welcome screen in Photoshop isn't there. I can't find where to turn it on. In Illustrator CS5, the same problem was there, but I turned it on under the "Help" menu. But, alas, Photoshop welcome screen cant' be found anywhere (either in preferences or help menu).
    Anyone know?
    Thanks,
    Bruce

    Stop searching!
    There is one in Illustrator, but none in Photoshop

  • Muvo^2 Hangs at Welcome Screen (Showing the word "CREATIV

    This is the first time I have posted in this forum.
    I have a problem with my Nomad MuVo^2 .5 GB player.
    It seem to be working fine until I have re-formatted it by using it's recovery mode.
    And then I upgrade a firmware to the lastest (.6.0) version.
    Since that there was a little problem.
    The process of upgrading the firmware seem to be really slow.
    And when it completed it said something like the device is rebooting.
    And then I heared the unpluged sound from windows XP (The sound that happen when you disconnect the player from USB port)
    Since that there was nothing happened
    So I looked at the player's screen
    It's freezing at the welcome screen (The screen showing the CREATIVE logo) and nothing else (no harddisk reading sound or anything)
    I have tried pressing every button but nothing happened so I need to remove the batteries and replaced it again but the player stilled got the same problem
    I can't pass through the welcome screen even if I tried the recovery mode, it doesn't show anything else except the welcome screen
    no recovery mode no loading music nothing.
    Anyone know how should I do to fix my player problem?
    Thanks in advance

    If you can't get into Rescue Mode the player has a serious problem. You need to contact Creative Support.

  • Dreamweaver CS5.5 still showing old Widget Browser

    I recently updated from Dreamweaver CS5 to version 5.5 -- and watched a Lynda.com video displaying the new features of CS5.5.
    One of the videos focused on the new features in the Widget Browser, specifically:
    1. The ability to import/export widget preset configurations
    2. The ability to drag a widget into an open document by clicking on a new "Drag and Drop" icon
    Now, when I load 5.5, and go into the Widget Browser...neither of those new features is present. The import/export buttons are nowhere to be seen, and neither is the "Drag and Drop" icon. It seems to be loading the exact same Widget Browser as version 5.
    Any ideas how to get it to load the correct Widget Browser?
    (I still have Dreamweaver CS5 on my system. I thought the update would copy over it, but it didn't...)
    Dax

    Problem solved.
    I did a complete uninstall of CS5, then an uninstall of the Widget Browser, then an uninstall of CS5.5.
    Re-installed everything, and now I have the newest Widget Browser working fine (Version 2.0 Build 230).
    Thanks!

  • Dreamweaver CS5 not working with CS4 templates?

    I upgraded from CS4 to CS5 of Dreamweaver today and so I opened a template up in CS5 that I made for my site in CS4. So everytime that I make a new page from the CS4 template it will look good in the editing view and I can edit everything I'm supposed to like it should. But whenever I test the page in my browser or the Live View it won't use JavaScript or it won't show me AdBrite ads in the page and it messes up my CSS. I have no clue why its doing that because the new pages from this template in CS4 work fine but new pages in CS5 from the template wont show up correctly. Oh and every other page that I made in CS4 works very well in the CS5 but the new pages in CS5 just won't seem to preview well. Do you guys know of any solution for this or how I can solve this annoying problem?
    Any answers are greatly appreciated!!!

    One thing to note if you attempt JulesN's solution of moving the DIV tag inside the editable region... since this move is to a "non-template" area.. on many pages of your site it will simply mean the removal of the DIV tag outside the editable region.  You will need to manually go into each page and add the DIV tag back into the editable region as Template updates do not modify the content of those regions.. I tried this today and had hundreds of pages instantly stop displaying correctly before I realized the logic behind it.. I was able to recover.  However if you are using nested DIV tags as containers.. they are all either one big editable region or you need to wait till Adobe fixes this and use CS4 as I'm being forced to.  I have submitted as a bug as well.

  • Dreamweaver CS5 not showing all recordsets in databases/bindings/server behaviors windows

    Dreamweaver CS5 is not showing all recordsets created on a page in the databases/bindings/server behaviors windows.
    I'm on XP, DW version 11.5 build 5344.
    Any idea of how I fix that?
    Thanks,
    Betty

    Dreamweaver CS5 is not showing all recordsets created on a page in the databases/bindings/server behaviors windows.
    I'm on XP, DW version 11.5 build 5344.
    Any idea of how I fix that?
    Thanks,
    Betty

  • Flex-box model not correctly implemented in Dreamweaver CS5.5, pleas improve!

    Hi all,
    there is a good introduction to: Flexible Box Layout module
    see: http://www.css3.info/introducing-the-flexible-box-layout-module/
    I tried the same example in my new Version of Dreamweaver CS5.5
    --> surprise: Dreamweaver CS5.5 cannot show in a correct manner a following div:
    <div class="flex_box flex_stretch flex_vertical">
    where css are:
        .flex_box {
                            background: url('./img/box-model.png') no-repeat center center;
                            height: 180px;
                            margin-top: 16px;
                            width: 180px;
                .flex_stretch {
            display: -moz-box;
                            display: -webkit-box;
                            display: box;
            -moz-box-align: stretch;
                            -webkit-box-align: stretch;
            box-align: stretch;
                .flex_vertical {
            -moz-box-orient: vertical;
                            -webkit-box-orient: vertical;
                            box-orient: vertical;
    CS5.5 can only strech in 1 direction, when shown as in a browser (German "ENTWURF").
    In Firefox, sam is ok:
    I need a correct representation of these boxes, when will there be an improvement??????????
    WSteiner

    John,
    I misundrstood you response
    I entered http://localhost in my browser and recieved the following page:
    Asd you can see everything is working. I thought that when you called local host, it went to the www/ directory where I have my sites
    I still don't see a problem with my settings
    Server Folder: C:\TNG813onMowesII\www\
    Web URL: http://localhost/genealogy/
    I hate it when the tool is more trouble than the work.
    Larry Voyer
    Site Creator/Administrator
    http://larryvoyer.com/genealogy/

  • Dreamweaver in CS5.5 (blank welcome screen)

    My dreamweaver in CS5.5 shows no info in the welcome screen  how do I get it back?
    Subject line edited by moderator to make it clearer

    Hello Bruce,
    because I can't reproduce your error message I suggest you contact Adobe at the following page:
    http://helpx.adobe.com/contact.html
    > View all Products ... > Dreamweaver > Select a topic ... > Using my product ... > I still need help ... > see screenshot:
    Please use chat, I only had the best experiences.
    Hans-Günter

  • Dreamweaver CS4 Stalls at Welcome Screen

    When you open Dreamweaver CS4, the Welcome Screen never show up.  You can still work in it, but I have a user who really likes the Welcome Screen.  I have had this issue with Windows 7 in both 64 and 32 bit.  Please advise.

    Edit>Preferences>general tab   Check the box that reads "Show Welcome Screen".

  • Dreamweaver CS5 will not open. It shows the splash screen and terminates with non admin login

    Dreamweaver CS5 will not open. It shows the splash screen and terminates with non admin login but works fine with admin login.
    OS - WinXP Sp3
    Things I tried.
    1) Gave full rights on dreamweaver folder in program files.
    2) Disabled welcome screen
    3) Updated to Dreamweaver CS5 11.0.4
    4) Reinstalled
    5) Formated PC
    But issue persists, please help.

    Have you tried deleting or renaming the Dreamweaver configuration file?
    See http://forums.adobe.com/thread/494811
    This can solve many problems and create one in that any snippets that are installed are lost, but you can get them back. Instead of deleting the config file, just name it config.old. When your system is working, just copy the snippets from the .old file to the new one.

  • Dreamweaver CS4 Mac - Welcome Screen Is Blank Under Network Account

    This is a new installation of Dreamweaver CS4 on a computer running Mac OS X 10.5.7 in a computer lab environment.  All updates have been applied.  Users' home folders are hosted via AFP on a server running Mac OS X Server 10.5.7.  The "welcome screen" window that appears after launching Dreamweaver CS4 is blank for users using network accounts (both admin and non-admin).  The welcome screen appears correctly when launched from within a local accounts (admin or non-admin).  The welcome screen window can be closed and then the application appears to run just fine.  Has anyone else experienced this issue or found a solution?

    Some clues: Apparently, the "welcome screen" is an .swf file located in each user's home directory here:
    ~/Library/Application Support/Adobe/Dreamweaver CS4/en_US/Configuration/Content/Welcome/Flash/welcome.swf
    I can open this file in Flash or Flash Player under a network account and it looks just fine, yet it won't load when Dreamweaver CS4 is launched, resulting in a blank, white "welcome screen."
    For now, I've decided to push a default preferences file to new users that turns off the welcome screen, but I'd prefer to find a fix. Anyone have any clues?

  • Dreamweaver CC can't remember not to show welcome screen

    Dreamweaver CC doesn't seem to remember some settings after being relaunched. For example I can't turn off the welcome screen, it launches everytime I open the application. It also can't remember that I don't want to upload dependent files. I didn't have these issues with CS6.
    Mac OS X 10.7.5

    Hi Matt,
    I had a question... Do you Sync after disabling the welcome Screen ?
    If yes , then sync causes the Welcome Screen to reappear
    Please go through this link - http://helpx.adobe.com/dreamweaver/using/synchronizing-dreamweaver-settings-creative-cloud .html
    Let us know if you are doing something else

  • Error message starting up Flash CS5 -- appears to be caused by welcome screen

    Hello,
    I am running windows 7 64-bit, flash player debug (10.1 from labs) and CS5 Master collection.
    I staretd noticing an issue today -- Flash Professional CS5 has begun to freeze on opening it. I eventually get the message "a script in this movie is causing flash player to run slowly. if it continues to run, your computer might become unresponsive. Do you want to abort the script?". At this point, I am not running any movies, I am just trying to open flash Pro CS5. When I choose to click "yes" (eg abort the script), then the buttons on the welcome screen do not work. When I click "no" (and do not abort the script) then flash crashes some time in the first 5 minutes of authoring.
    I also noticed that if I disable the opening page (check "do not show again") and reopen flash -- then no problem
    Any ideas on what is happening - anyone?
    Thank you

    Hello
    Just wanted to report back this was a simple issue -- it turned out to be a corrupted configuration file for Flash CS5. I called Adobe tech support and an engineer helped me to do the following. Please remember I am running windows 7 (64 bit), so this is what I did for that OS ...
    First I closed flash CS5 pro. Then I navigated as follows ... from the C drive ==> then to the users file ==> then to my user file ==> then to appdata (this is normally hidden, so just unhide files or type appdata as next drill-down in navigation window after your user file) ==> then to Local ==> then to Adobe ==> then to Flash CS5 ==> then to en_US ==> then to configuration. Then I renamed the configuration file (to configurationold)
    I restarted flash pro CS5 -- and problem solved.
    Thanks kglad and everyone
    Bob

Maybe you are looking for