Dreamweaver CS6 - FTP changing my file permissions on upload???

ORIGINAL POST: SEPT 19, 2012 http://forums.adobe.com/message/4784335#4784335
Upgraded to cs6. All programs work perfect for me exceopt Dreamweaver.
I have never expierenced this challenge however no matter what file(s) I upload dreamwever is chanign the file permissions.
For instance if I upload an image to the sever the image won't appear. I check permissions and they are set to 0. Same with files.
I have to now go in to each item I upload and change permissions to 644 or 755 depending if its a file or directory.
This is a Dreamweaver exclusive problem as it does not happen when I use Filezilla and Im working on 6 different servers.
ONLY when I upload files with Dreamweaver CS6 do the file permissions change on upload. Cs5.5 no problem.
Any ideas?
Aloha!
STILL NOT WORKING UPDATE:
I was even on with India Adobe support doing a screen share and they watched in real time as I uploaded a file and Dreamweaver and it changed the permissions to 000. You can 'Get' a file with 775 permissions then 'Put' that same file and it will chanve to 000 permissions.
Support failed to address this problem after 30 days and never called back.
STILL NOT WORKING UPDATE: Changing ro SFTP seems to be a workaround.
See Full Discussion here as I posted in the wrong area. http://forums.adobe.com/message/4784335#4784335

I'm using DW6 version 12.2, and this problem is still happening.
The permissions are defaulting to 0664, where I need them to be 0644. Every time I create a new file, it defaults to 0664, and I'm unable (not permitted) to view that file online until I go in, using another FTP program, and change the permissions to 0644... or manually go in the slow-poke way using DW6 Remote View -> [file name] -> Set Permissions.
Too bad there's no way to configure this in the Preferences area of DW6.

Similar Messages

Dreamweaver CS6 hangs when opening file

Starting recently Dreamweaver CS6 hangs for 30 seconds or more, sometimes saying not responding, when I open an HTML file. It appears to do this when the file contains links to external places. To test I created a file that contained nothing except the "new HTML file" basic headers, saved the file, then opened. This test file did not hang.
I have tried the registry fix "ResolveRemoteURLToIPAddress FALSE" and deleting the personal configuration directory (with Dreamweaver closed). Neither of these solved the problem. Dreamweaver still hangs when opening a file.
Any other ideas?
Barry.

Once the document opens, check the code for any protocol relative links (links that start with // rather than http://) and change them to http:// links, at least during development. It is a know issue to Adobe and will cause what you describe.
If you don't have any protocol relative links, links to third party sites can cause issues from time to time if their servers are slow or have any kind of conflict with your network. Unless you absolutely can't, you may want to copy those external scripts to your local site and link to the local versions instead, again, during development.

Dreamweaver CS6 uses old, deleted files: How can I get rid of them?

Hi Everyone,
this is my first posting... I have a problem that is really annoying. Using Dreamweaver CS6 on a Win-7-64bit desktop computer, I had external help for transferring a website into html5 and CSS3. When the site was nearly done, I imported the whole site and worked on it by myself using Dreamweaver CS6. This worked well, until I had external help again in the index.html file. I imported the new index.html file that was worked on externally, but dreamweaver does not allow this: It keeps showing the old index.html file that I had deleted before, even when I try to re-import the site etc. In the web, I found that it might be helpful to remove the file history using regedit. I did that, and also tried my very best to remove every remnant from the old version, aftzer that, used CCleaner and Tuneup Utilities 2014, and again, this did not help. I then thought the only way would be de-installing Dreamweaver CS6, again cleaning my whole computer for any probably remaining filed or .bak files, and then after several re-starts and cleaning processes, I re-installed Dreamweaver CS6, in the hope it would work now. However, Dreamweaver again came up with the same problem. Somewhere in the mists of the harddisk, dramweaver still must have access to long deleted files, and again does not allow me to work on the new corrected index.html file. Does anyone of you have an idea how I can get this working properly? Thanks sincerely in advance, and best regards from the Salzburg Lake District, Giraldus

Something seriously strange is happening on your system.
You deleted the index.html file from your machine and DW is somehow still opening it?
Can you have both the new and old one open at the same time within Dreamweaver?
If so, go into Source View and copy all the code from the new one. Highlight and delete the code from the old file and paste the new code in. Hit Save on the old file.
If that doesn't fix the issue, you'll need to contact your IT guy to have the wombats cleared out of your system. DW only works with the files on your hard drive, it doesn't store them, so if you've tried to delete something and DW can still see it, it's still on your system (the deletion attempt failed). You may have some kind of permissions issue or something more serious going wrong with your OS.

How to change default file permissions so others can write to file

We have 15 people sharing files on a network. If we open a file on the network, work on it, and save it, it is readable and writeable for everybody. But if we drag the file off the network, work on it on our own hard drive, and save it, and THEN drag it back to the network, it is read-only for everybody. Documents made on our own hard drives are, by default, read-only for others.
This is a real time waster for us!
This means that every time we make a document on our own hard drives, we have to remember to go to the extra trouble to change it's permissions before we put it on our network. Please, is there some way to change the default settings, so that if I, say, save a Word doc on my hard drive and then move it to the network, it is readable and writeable by everybody without me having to change it's permissions?

Sounds like you are not using ACLs. When you double click your share point in Server.app, how many entries do you have in the Permissions window? If you have only 3 then you are not using ACLs which explains why your permissions are not inheriting. POSIX permissions, the base three of owner, group, and everyone, do not inherit. You need to add at least one more permission entry to the table. This is called an ACE (access control entry). Together, you are building an ACL (access control list). Try not to use users. Always add groups if possible as it is easier to manage and never requires propagation of the permissions.
R-
Apple Consulting Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

Dreamweaver CS6 doesn't open files

Hi Forum,
I have installed DW CS6 from the cloud on my Mac. I have exported the sites from DW CS3, and then imported them in CS6.
After first time installation, none of my files would open after double-clicking on them ( I allways got the 'design-notes', even if I have switched it off in the site preferences). I could only open them by using right-click -> Open with Dreamweaver
After deleting DW6 and re-install, opening works with one site, but when switching to another site, the same anoying issue happens...
Design notes pop-up and the document doesn't open, only when using right-click -> Open with Dreamweaver.
Looks there is some kind off cache somewhere which is corrupted, but thats only a wild guess.
Please help, because for the time being I am switching back using DW CS3.
Regards Will

Hi Nancy,
its Mac OS X 10.8.2, and all associations are ok. ( Double clicking on a file in the Finder works ok ).
In the meantime I have found the problem;
After deleting the folders of the sites in Users/<name>/Library/Application Support/Dreamweaver CS6/en_US/Configuration/SiteCache, and restarting Dreamweaver, all works ok.
And again, thanks for helping !
Regards Will.

Changing WRP file permissions with a GPO

I would like to set my domain workstations so that users are not able to launch regedit.exe, only administrators. Is there a way to set file permissions with a GPO where TrustedInstaller is still the owner and the file permissions are TrustedInstaller defaults
minus users? As soon as I push these manually defined settings via GPO, it completely breaks regedit.exe, and I get an access denied when I try to run it (even as local administrator).
Is there another way to deny domain and local users from launching regedit.exe (or any other WRP file) and only allow SYSTEM and Administrators access through TrustedInstaller?
Thanks in advance

Hi,
Is there another way to deny domain and local users from launching regedit.exe (or any other WRP file) and only allow SYSTEM and Administrators access through TrustedInstaller?
To achieve your goal, please enable this group policy Don't run specified Windows applications which is under User Configuration\Policies\Administrative Templates\System.
You can input “regedit.exe” within the group policy to prevent specific domain users from open regedit.exe. Those users will get a message as below when they trying to open regedit.exe:
More information for you:
HOW TO: Restrict Users from Running Specific Windows Programs in Windows 2000
http://support2.microsoft.com/kb/323525
Best Regards,
Amy

Dreamweaver CS6 - ftp stops on some files or get permission errors

Just installed DW CS6 version 12.0 build 5861 yesterday on windows 8.1. The FTP connects & will upload some files but stalls with images. An example is an image called gov_logo.jpg . It is only 27kb but it stalls with only part of image on server. This is not the only problem image. Time-out is set to 60 seconds & the image will upload with a different ftp client as my host has checked & tested it. I have seen lots of so called fixes & have tried all but have noticed this issue is unresolved for lots of people. Could someone please help.
Thanks Chris

Hi Nancy,
I have used DW since DW MX back when it was Macromedia, then upgraded to Studio 8 & they worked well. Macromedia even did some trouble shooting for me & I'm just one of the small guys. Adobe on the other hand seem to leave you high & dry.
this just seems absurd(I'm not getting at you). I had researched these products from their respective sites before purchase. Yes it does seem that it's a win8.1 issue yet Adobe is selling their DWcs6 saying it works fine on 8.1 & obviously it doesn't properly. Just the posts in this website clearly show that it's not a one off issue & there are plenty of other forums & websites stating this issue. For anyone else that may & will have this same issue there seems to be no resolution & you may as well throw your DWcs6 & your windows 8.1 computer in the bin & kiss goodbye to a few thousand dollars for those products & a few more for the work you lose. It seems Adobe & Microsoft don't care about small clients & loosing them won't effect their bottom line, they are too big for that.
This link shows Microsoft's clarifying the compatibility of 8.1 & DW cs6 Windows Compatibility Center: dreamweaver
This link shows Adobe saying the same thing Windows 8.1 compatibility FAQs | CC, CS6, Acrobat
In my opinion both of these links have misrepresented their products joint compatibility & this is what I went off before forking out the $$.
This link shows just a small fraction of people complaining about windows 8.1 WinInet issue including DW cs6 users. FtpOpenFile and InternetWriteFile broken/changed in IE11 | Microsoft Connect.
Once again thanks to you Nancy & bregent for taking the time to assist me, as without you guys similar problems people have could take a huge toll on them. Keep it up. :-)
Is there a direct contact for Adobe? Or is this forum it? As I might have to buy a Mac & swap the windows version of DW cs6 to the Mac version. Or would you reccomend another way around it?
Cheers Chris

Dreamweaver CS6 ftp issue

I have for years used Dreamweaver as my primary WYSIWYG design app at work. Recently I installed CS6 at my home as a 30 day trial and I am very interested in a subscription to the new Creative Cloud.
Everything installs fine and I am able to set up a ftps on port 990. I am also able to do this for multiple ftp connections. After a few days of working fine and transferring multiple files the program can no longer make connection with the host. There are a few blogs about this and the recommend only switching sites while in local view of the site, but I have tried the install 3 times on a clean system and always the same result even after only setting up one ftp connection.
I would be interested in herring from other people experiencing this issue.

After a few days of working fine and transferring multiple files the program can no longer make connection with the host.
Maybe your host server is having a bad day. Are you sure it's not down?
Nancy O.

Workflow to change item/file permissions using a people column on the List/Library?

SharePoint 2013 Online.
I have a Document library with users that can only add new items permission by default.
There is a new people column in that library
I presume I can manually change perimssions on one item/file to let a user have full control over that particular item.
Can a workflow be added to so that the user in that people column get's full control to the item on edit or new events in the Workflow?
Can all other individual users be removed with this permissions for that item from the events of the workflow?
Thanks in Advance!
============================
Thank You
cyberpine.com

Hi cyberpine,
In SharePoint on-premise, there are some workflow actions used to modify list item permission from SharePoint Designer workflow, like Add List Item Permissions, Replace List Item permissions. And these actions are only available in
Impersonation Step.
I’m not sure if it is similar in SharePoint online, you may check this. If there is any further question, I would like suggest you to give a new thread on
Office 365 forum.
Thanks & Regards,
Emir
Emir Liu
TechNet Community Support

How to change local file Permissions as a default

I have a mavericks Imac with certian permissions on a folder. when users copy and paste the folder on a server for others to use, some users are not able to acess the files.I know how to change the permissions on the folder manually. But I want to know if there is a way to make my own default permissions to stick with the profile for making new folders?
I have looked into booting to an OS CD and choosing default permissions for files and folders, but I dont see how that will change anything, becuase I don't need to reset the permissions, i need to be able to give access to certian users automaticaly.
any ideas?

Sounds like you are not using ACLs. When you double click your share point in Server.app, how many entries do you have in the Permissions window? If you have only 3 then you are not using ACLs which explains why your permissions are not inheriting. POSIX permissions, the base three of owner, group, and everyone, do not inherit. You need to add at least one more permission entry to the table. This is called an ACE (access control entry). Together, you are building an ACL (access control list). Try not to use users. Always add groups if possible as it is easier to manage and never requires propagation of the permissions.
R-
Apple Consulting Network
Apple Professional Services
Author "Mavericks Server – Foundation Services" :: Exclusively available in Apple's iBooks Store

I a owner and administrator. I can't change any file permissions. Help tells me to 'get info' on a file, them click on the lock icon to enter password. The lock icon is not present on any files I 'get info' on. How can I change permissions

I attached an external drive to my macbook pro for backup purposes. I found that the device is 'read only' for me. I read that I could change permissions by selecting 'get info' for a item and clicking the lock icon to submit my password. The lock icon is not displayed on any 'info' window for any file on my macbook, much less the attached drive. I am the only user and administrator as far as I know. What steps can I take to change permissions? Thanks. My 1st post.

How can I tell? The 'get info' window has no lock and under sharing and permissions, on says 'you can only read'. I did a get info on the Macintosh HD and it had a lock on it but said I could only read, for what that it worth.

Changing multiple file permissions - Applications folder

After using migration assistant in Snow Leopard and then changing the username of my primary user, all third party apps in my Applications folder require me to enter the admin password when moving, updating with Sparkle, etc. They don't seem to have a primary owner.
I saw the steps outlined here: http://discussions.apple.com/thread.jspa?threadID=1778969 for changing permissions on multiple files but I'm wary of doing this on the Applications folder.
Does anyone have any advice on how to fix this? I went through files individually and i'm still getting messed up permissions all over the place. Thanks!

DO NOT use "apply to enclosed items" on the main Applications folder! Do not use it on any system created folders. they often have hidden ACLs and using this button would propagate the ACLs to everything inside. this is the case for the main Applications folder. there is no easy way to do what you want because Apple changed the permissions structure in Snow leopard and the default applications no longer have read+write access by admin users by default. I would suggest you don't mess with permissions on Applications. if you ever need to update a 3rd party application simply delete the existing copy in /Applications and put the new one in. it will have correct permissions.

Dreamweaver CS6 FTP Issues

i have created a site in dreamweaver and as far as i am aware the site works great, i have hosting and webspace with 1and1 and have connected to their servers via ftp, i have to manually upload the site and cannot seem to get the webpages themselves to upload, only the *images* folder and *scripts* upload successfully, i have tried everything i can to resolve this but have had no luck whatso ever, any help would be much appreciated, thanks

May be you can try steps suggested in the troubleshooting document. Most of the points mentioned there are also applicable on DW CS6.
helpx.adobe.com/dreamweaver/kb/troubleshoot-ftp-issues-dreamweaver-cs5.html
--Bhawna

Changing multiple file permissions

I have a corrupted user in Leopard.
So I am copying all the files I need over to a new user.
Both are administrators.
Can I take a whole folder (Docs) and tell it to change all the files in Docs to give me read/write permissions or do I have to do each one separately?

Should be fine. First open a Get Info panel for the folder in question, and see if there are any "custom" permissions set on it. If not, you are good to go. If yes, it is a good indication that ACLs are set on that folder, and you should go carefully from there.
ACLs are a special system of file/folder permissions that overrides the regular UNIX permissions. They were first introduced in Tiger as a user-enabled option, but Leopard was the first OS X to make use of them extensively by the System.
A "deny delete" ACL setting is put on many system-created folders, like your home folder, your Documents folder, etc. This is to prevent accidental renaming or deletion of them. If you try to trash your Documents folder, you can, but you will be prompted to enter an admin password.
Clicking the "apply to enclosed items" button on one's Documents folder will set the "deny delete" ACL to all of its contents, meaning you will need to enter an admin password to subsequently delete anything inside.

Change multiple files permissions?

Hi,
I would like to know if there's any way to change the permissions (from read only to read and write) of multiple files at once (without doing it one by one) ?
Thanks in advance
iMac 20" Mac OS X (10.4.8)

I was able to find this concerning the X check box.
http://docs.info.apple.com/article.html?artnum=106712
Execute (--x)
You can open the AppleWorks application if you have the execute permission for it.
Also note that you must have execute permission for any folder that you can open; thus File Sharing requires execute permission set for other, world, and everyone for the ~/Public folder, while Web Sharing requires the same setting for the ~/Sites folder.
Jesse Tyler

Dreamweaver CS6 - FTP changing my file permissions on upload???

Similar Messages

Maybe you are looking for