Dreamweaver CS6 on Mac - Retina Display not being used properly.

Hello. I have just installed the CS6 Dreamweaver trial [which I intend on purchasing eventually] and supposedly it is Retina display compatible. However, the fonts and in-program graphics look like crap for lack of a better word. I have checked the "Get info" panel and the box that says "Open in low-resolution" is checked and grayed out so I cannot change the setting. How to I get the program to use Retina properly? It is a fresh install, fully updated, and I haven't changed a single setting, I literally installed it 20 minutes ago. Any help on this is appreciated. Thanks!
Currently running OSX Mountain Lion 10.8.2

Dreamweaver CS6 is not retina ready. Dreamweaver CS6 Cloud version is. Depending on which version you get depends on what you see. If you are not trying the Cloud subscription then what you are seeing is what you will get until CS6.5 or 7 of the traditional licenses.

Similar Messages

Where can I find a patch for Indesign and Acrobat cs6 for mac retina display?

I have found the patch for screen resolution for photoshop, but the illustrator patch says it is not compatible and I cannot locate one for in-design (my primary program) or Acrobat. There must be a patch, right? Or else whats the point of it?

The patch is upgrading to InDesign CC, which requires an Adobe Creative Cloud subscription. Sorry.
There is no Acrobat CS6. The last version is Acrobat XI which was created too late to include support for Retina Display. It will probably be in the next version of Acrobat.
Creating "patches" for Retina Display are much more engineering intensive than you would expect. In the case of InDesign, it had to be completed in the context of moving to becoming a 64 bit application and moving application development from Carbon to Cocoa (a required move on the Mac accomplished finally in InDesign CC).

When will Photoshop (CS6) support mac retina displays?

Hi,
Just curious as to when Photoshop (CS6) will support the retina display of the new macbook pro? I've searched around and haven't seen any news about it since august. Did the update come out and I missed it?
Thanks!

Well, a few months ago Adobe promised the Retina update would be out before year-end...
And now the latest is, it looks like it could be out as soon as December 11th - so here's hoping.

Is there a better version of photoshop that is not blurred in mac retina display???

hi,
i own a macbook pro retina display and i use photoshop frequently.unfortunately photoshop cs 6 is blurred on my mac...initially i thot it was an installation error but the controls and the workspace on cs6 is blurred...
is there any other mac compatible (wrt. display) version of cs6??

Not yet... in August Adobe announced that a few of the apps in the CS6 would be upgraded to Retina-ready: Photoshop was amongst that group. I do know that it's still being worked on, but have heard nothing official from Adobe lately on when a Retina-compatible version would be released.
Hang in there... it's coming: probably 1st quarter 2013.
Clinton

Will Adobe develop a patch for pixelated CS6 workspace on retina display?

Will Adobe develop a patch for pixelated CS6 workspace on retina display?

You can believe what you like, but it won't change the truth.
CS6 is a Cocoa application, and Retina support requires Carbon (or the other way around, I'm a Windows user). It's not a matter of adding a few lines of code to make the change, it required rewriting the entire program from the ground up.

Help with Dreamweaver CS6 for Mac

I am a long time user of Dreamweaver CS 5.5 for PC and recently purchased an IMac. I have a trial version of Dreamweaver CS6 for Mac and am having difficulty displaying an html file in Live View. I always used "Preview in Browser" in CS 5.5 and need this same feature. I have an active site that I imported into CS6 and the site uses templates. Any help would be greatly appreciated. Thanks, Jim

Ask in the DW forum.
Mylenium

Bought a Mac Mini. at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used. First and last Mac for me. But can I get something for the junk?

I have pulled it out of the box and put 2 Mac approved mem sticks in it to boost it to 8 Gigs mem and it still locks up and freazes.. So many people told me Mac was the way to go... 1500 dollers could have bought me a great pc laptop. Now I have a wirless mouse keyboard and a mac mini (aka Brick) that allowed me to donate money to a cause that is helping buildings and companies out side of the US. While I have junk.. It's still under warranty and I reinstalled the os after the new mem sticks. Again.. locks up and does nothing. What can I do with this? Toss it in the trash? Any info on what I might do with it.. Please help!

It would be most helpful if you updated your system information:
Please reconcile the following
at 18 day's old it started to lock up and not function. Took it in and they wiped and reinstalled it. Well at 24 day's old it's been sitting in the box not being used.
... I reinstalled the os after the new mem sticks.
If your Mini is anything less than six months old it would be running Lion, not 10.6.1, nor would it have been necessary to "reinstall the OS". Any help that anyone can provide is predicated on your system configuration so it's important.
If you are running Lion then boot your Mini while holding the D key. This will load Apple Hardware Test which will enable you to test your memory. "Mac approved" memory is sort of vague, and even memory that is allegedly designed to meet your Mini's specification may fail. There few reputable memory vendors.
"Apple installed" memory is more meaningful, and indicates Apple has tested it and guarantees its function. Otherwise all bets are off with a claim of "Mac approved". You will have to verify that yourself with Apple Hardware Test.
If your Mini was running, or ever ran OS 10.6.1 for that matter, it is close to three years old.
You must clear up these uncertainties before anyone can help.

Preferences in dreamweaver CS6 on Mac OS Yosemite

In which file(s) are stored sites information (names, servers, ftp ...) in dreamweaver CS6 on Mac OS Yosemite ?
Thnaks in advance.
Best regards.
Bernard Mantel

Thank you very much for solving so quickly my problem !
Best regards.
Bernard Mantel
Le 18 nov. 2014 à 15:25, Preran <[email protected]> a écrit :
Preferences in dreamweaver CS6 on Mac OS Yosemite
Preran <https://forums.adobe.com/people/Preran?et=watches.email.outcome> marked Jon Fritz II <https://forums.adobe.com/people/JonFritzII?et=watches.email.outcome>'s reply on Preferences in dreamweaver CS6 on Mac OS Yosemite <https://forums.adobe.com/thread/1638160?et=watches.email.outcome> as helpful. View the full reply <https://forums.adobe.com/message/6940319?et=watches.email.outcome#6940319>
Marked as helpful:
That type of file doesn't exist until you export it out of DW.
Go to Site > Manage Sites > click the site you want to export the ftp info for > Export
That will create a .ste file that will allow you to import all of the site settings on another installation of DW.
If you're just looking to edit the information, you do that under Site > Manage Sites > click the site you want > Edit > Servers > click the server you want to edit (testing or remote) > Edit
Following Preferences in dreamweaver CS6 on Mac OS Yosemite <https://forums.adobe.com/thread/1638160?et=watches.email.outcome> in these streams: Inbox

[svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

I have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please.

My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

My brand new MacBook Pro retina display not charging the battery any more after 3 weeks...no green or red Led. Any one now about this problem? Thanks

Either the power brick is damaged, or the charging circuit is on the blink, or both. Either way, a trip to the Apple Store or the Apple Authorized Service Provider is in order, as this ain't no bargain basement toy.
In the meantime, can attempt an SMC Reset to see if it helps.

Installing Win in Mac retina display

Is is possible to install Win 2007 in MacPro (retina display) with USB (2.0 or 3.0) as new Mac retina display lacks DVD.

Yes. Install Windows the same way you would in a Macbook Air. Put the Windows and the downloaded support software onto a usb thumb drive. Make the thumb drive bootable and follow the installation guide. http://support.apple.com/manuals/#bootcamp, or use an external DVD for the Windows DVD.
You should visit the Boot Camp forum. https://discussions.apple.com/community/windows_software/boot_camp

I recently up grade from pc to mac, how do I download dreamweaver cs6 for mac computer

I recently up grade from pc to mac, how do I download dreamweaver cs6 for mac computer

Your CS6 serial number will be platform specific, if your serial number is for windows they you may need to contact adobe support and request a platform swap
refer
Order product | Platform, language swap
Once it is done, then you can download the product from
Download CS6 products

[Solved] Xorg log says Option "AccelMethod" is not being used

I am using Arch for about 3 weeks now. I initially got some problems for setting up my xorg.conf with correct resolution but i solved it.
Today i looked my Xorg.0.log and find that Option "AccelMethod" is not being used.
So please help me in setting up my xorg.conf correctly.
Xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "extmod"
Load "dri2"
Load "record"
Load "glx"
Load "dri"
Load "dbe"
Load "ddc"
Load "i2c"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Samsung"
ModelName "Samsung SyncMaster"
HorizSync 30.0 - 80.0
VertRefresh 60.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
#Option "RenderAccel" "true"
Option "AccelMethod" "UXA"
#Option "ExaNoComposite" "false"
Option "DRI" "true"
Identifier "Card0"
DRIVER "intel"
VendorName "Intel Corporation"
BoardName "82946GZ/GL Integrated Graphics Controller"
BusID "PCI:0:2:0"
#Option "PanelSize" "1024x768"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
My Xorg.0.log is
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH x86_64
Current Operating System: Linux puvana 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 07:46:03 CEST 2009 x86_64
Build Date: 18 July 2009 03:49:37PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug 1 12:36:07 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(==) No device specified for screen "Screen0".
Using the first device section listed.
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0xb40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2972:8086:5354 Intel Corporation 82946GZ/GL Integrated Graphics Controller rev 2, Mem @ 0x50100000/1048576, 0x40000000/268435456, I/O @ 0x000020e0/8
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 2.7.99
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41, IGDNG_D,
IGDNG_M
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(**) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 946GZ
(--) intel(0): Chipset: "946GZ"
(--) intel(0): Linear framebuffer at 0x40000000
(--) intel(0): IO registers at addr 0x50100000 size 1048576
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): No SDVO device is found in VBT
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C device "CRTDDC_A:E-EDID segment register" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 279
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
(II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): EDID vendor "SAM", prod id 279
(II) intel(0): Output VGA connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1024x768
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 7676 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (310, 230) mm
(**) intel(0): DPI set to (83, 84)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000307
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS DLINE_COMPARE_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri2.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 238848 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 955388 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x0077f000: end of stolen memory
(II) intel(0): 0x0077f000-0x0fffffff: DRI memory manager (254468 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x0077f000: start of memory manager
(II) intel(0): 0x0079f000-0x00a9efff: front buffer (3072 kB) X tiled
(II) intel(0): 0x00b9f000-0x00b9ffff: overlay registers (4 kB)
(II) intel(0): 0x00ba0000-0x00ba9fff: HW cursors (40 kB)
(II) intel(0): 0x10000000: end of memory manager
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is off
(II) intel(0): Display plane B is now disabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) Option "dpms"
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "AccelMethod" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 312 x 234
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
(**) ImExPS/2 Logitech Explorer Mouse: always reports core events
(**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event14"
(II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
lved
Last edited by bharani (2009-08-02 11:49:37)

The latest intel drivers only support UXA, so any AccelMethod option is ignored, as you can't set anything else than UXA.

HBOgo "StageVideo is not being used"

I just updated flash today, November 25 2013, which gives me version 11,9,900,152. The problem I'm having seems specific to the HBOgo.com site.
The problem occurs in all three browsers that I've tried, Firefox (my preferred browser), Chrome, and IE 9. Also, I've tried the various suggested troubleshooting suggested on the Adobe site as far as enabling Flash addon in IE after disabling (unchecking) the choice for ActiveX filtering. I've tried uninstalling/reinstalling all 3 browsers, reinstalling flash, resetting all video card settings to default, going through the Device Manager and uninstalling the device entirely, making sure it has no errors or conflicts anywhere and the same thing for the network devices, they all indicate that they are working properly.
My device is an HP Pavilion dv7 Notebook PC running Vista Home Premium Service Pack 2. It has 4 GB of memory and the video card is an NVIDIA GeForce 9600M GT. The drivers are all up to date and so is every application and its associated add-ons that I will mention. Also, it shipped with a Blu-Ray player which I've used to display Blu-Ray content on an external monitor with no issue. (If it can do that, then shouldn't it just be some software issue preventing it from playing back a video stream of inferior quality from hbogo?)
Regarding Flash Player, I've watched videos on YouTube and Hulu (and countless other sites which stream Flash Video) at resolutions of 720 and 1080 which played at framerates between 25 and 30 fps and which also did not use hardware acceleration but nevertheless maintained CPU usage of less than 70%. So, the computer can certainly do it even without the help of the GPU, and it can do it from other sites that use flash, but not from HBOgo. That's a second problem, even when flash video plays well, it's still not using hardware acceleration, but first I want to know why HBOgo's flash player is so much worse than everyone else's player.
Here is the specific issue: I navigate to HBOgo.com, pick any video to play and begin playback. Playback usually begins at a relatively low resolution (I'd guess 480 or so based on its obvious pixelation), and then steps up the resolution gradually. Usually after a minute or so, it will have reached its best resolution and that's when it starts dropping frames like crazy and pinning the CPU at 100%. The video looks terribly choppy and the audio skips the more choppy the video is. When I click pause or hit the spacebar for a pause, it will take two or three seconds as it spits out the last few video frames before finally showing the paused icon on the last frame. Those two seconds seem to corrolate with CPU processing since there is no noticable delay when pausing video anywhere else under any other conditions. Of course, CPU useage will drop back to 5 or 10 while the video is paused.
Right-clicking the screen lets me choose "Show Video Debug" which in turn tells me:
     StageVideo enabled in OSMF: Yes
     StageVideo is supported.
     StageVideo is not being used, regular video 'probably' is.
This is where I got the information about dropped frames. If it matters, when paused, the buffer will fill to about 400 Mb plus or minus about 10 percent of that, perhaps. Also, during playback, the buffer maintains approximately the same amount, indicating that my ISP has no problem sending that much data to my device. The buffer seems fill to a lenght of time, about 60 seconds; so, as the video resolution goes down, the total buffer drops accordingly... sometimes it is at 200 Mb for 60 seconds with lower resolution, etc...
Speaking of my ISP, I have Verizon FiOS (I don't know why it would matter, but I'm in King of Prussia, which is near Philadelphia, PA). I just tested my bandwidth and it tells me that my IP is 71.175.97.244 and my download rate is 57.98 Mbps from some server in Matawan, NJ. I don't think networking issues factor into this at all. I say that because, digging into the developer tools (all 3 browsers show the same network activity: Firefox, Chrome, and IE) and clicking on the "Network" column, it consistently shows low latency for all the stream components. For example:
     path: http://hds.pro12.lv3.hbogo.com/videos/PRO12/e2/hbo/feature/728425/hbo_821867_PRO12_f4m/hbo _821867_PRO12_8-Seg1-Frag858
     method: get
     type: video/f4f
Timing Tab show:
     Sending: 0     Waiting: 89mg     Recieving: 159ms
This seems to indicate that I'm getting the data sent to me without any problem, so forget about network issues, right?
Also, regarding information available in Developer Tools, I can see that the flash video object has the paramater "wmode" set to "transparent". I already wasted time messing with this before I realized that the paramater is irrelavent while in fullscreen mode -- besides the fact that even when it is changed to direct or gpu when not in full screen, it does nothing to help matters. I think this was covered in one of the last discussions talking about lack of hardware acceleration on HBOgo -- the same discussion that ended with a few people saying that they were going to "throw in to towel".
What am I missing here? Why is StageVideo supported but not used? Why do other players which use flash play videos with better quality despite still not using hardware acceleration?
Windows Vista = updated
NVIDIA Video Drivers = updated
Flash Player = updated
Flash Addons (pepper flash, etc...) = updated
Firefox, Chrome, IE = all updated
There's got to be something I can do. What is it?

Hello Sarvanan,
What do you mean by "the respective field not having the Unit/Curr Objects"..?..some of them are of the type "number" whereas others are CHARS.
Everytime when i add some field i cannot re-create the whole transformation. There has to be some inconsistency as my mapping of source-target field is correct. I have also raised this to OSS but as usual they are taking thier own sweet time to reply.
Surprisingly the transformation got activated yesterday and the dataload too was successful. Today again the same ols problem of "parameter is not being used"..!!
still could you pls throw some light on Unit/Currency objects that u mentioned..??
Thanks in adv.
Sucheta

IMac (Oct 2009) keeps shutting down and restarting when not being used.

At least once a day, usually when not being used, I will see a dialog box that say computer had to restart due to a problem. data in problem report does not clearly state problem - many multi-page entries
Have reinstalled OS 10.8.2 once
this morning tried to restart with safe boot and had spinning beach ball for more than 15 minutes. shut down and restarted nin recovery mode. verified and repaired permissions (all seem to be related to Canon Pronter plug-ins- had an error message yesteday asking if I wanted to repair printer software and I said yes). Printer seems to be working. Had one statement that indicated a screensaver issue-see below
a while back, iTunes album art screensaver hung up with just two album covers flipping in all rows and columns.
after a few restarts, it started working correctly again..- yesterday I set screen saver to never, but still had a crash this morning

Here's the latest panic report. BTW, I ran for a while from an external system boot - very sloww (thumbdrive), but nothing happened. However, when I retarted I tried to restart in Safe Mode and the launch never completed (30 minutes without start)
Tue Jan 1 07:15:40 2013
panic(cpu 0 caller 0xffffff8002443908): "zalloc: \"buf.8192\" (878 elements) retry fail 3, kfree_nop_count: 0"@/SourceCache/xnu/xnu-2050.18.24/osfmk/kern/zalloc.c:1826
Backtrace (CPU 0), Frame : Return Address
0xffffff800aafb2b0 : 0xffffff800241d626
0xffffff800aafb320 : 0xffffff8002443908
0xffffff800aafb400 : 0xffffff80024de8d8
0xffffff800aafb450 : 0xffffff80024de395
0xffffff800aafb500 : 0xffffff80024dd64b
0xffffff800aafb530 : 0xffffff80024dd7f7
0xffffff800aafb550 : 0xffffff80026e7766
0xffffff800aafb5c0 : 0xffffff800272024c
0xffffff800aafb5e0 : 0xffffff8002721314
0xffffff800aafb680 : 0xffffff800271d2a0
0xffffff800aafb790 : 0xffffff800271959c
0xffffff800aafb840 : 0xffffff800271936a
0xffffff800aafb8c0 : 0xffffff80025137df
0xffffff800aafb910 : 0xffffff8002509fe1
0xffffff800aafb950 : 0xffffff800252685c
0xffffff800aafba00 : 0xffffff8002526679
0xffffff800aafba30 : 0xffffff8002712518
0xffffff800aafbaa0 : 0xffffff8002511c46
0xffffff800aafbae0 : 0xffffff800250936c
0xffffff800aafbb90 : 0xffffff80024fbb49
0xffffff800aafbc40 : 0xffffff80024fc314
0xffffff800aafbf50 : 0xffffff80027e182a
0xffffff800aafbfb0 : 0xffffff80024ced33
BSD process name corresponding to current thread: mdworker
Mac OS version:
12C60
Kernel version:
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
Kernel slide:     0x0000000002200000
Kernel text base: 0xffffff8002400000
System model name: iMac10,1 (Mac-F2268DC8)
System uptime in nanoseconds: 39390380895329
vm objects:17562048
vm object hash entri:2264400
VM map entries:6216720
pv_list:19034112
vm pages:74043792
kalloc.32:1826816
kalloc.64:170766336
kalloc.128:649785344
kalloc.256:648183808
kalloc.512:2285568
kalloc.1024:2637824
kalloc.4096:2387968
kalloc.8192:3989504
ipc ports:2168672
threads:1166880
vnodes:16507128
namecache:6952320
HFS node:21840864
HFS fork:6352896
decmpfs_cnode:2244312
buf.8192:7192576
ubc_info zone:3559464
vnode pager structur:1978800
Kernel Stacks:1982464
PageTables:44011520
Kalloc.Large:12347186
Backtrace suspected of leaking: (outstanding bytes: 236544)
0xffffff80024435b9
0xffffff80024245ed
0xffffff80027ee1bd
0xffffff80028507f7
0xffffff800285075b
0xffffff7f82b6b1ac
0xffffff7f82b72922
0xffffff7f82ab138b
0xffffff7f82ab49b0
0xffffff7f829f843c
0xffffff800243dcde
      Kernel Extensions in backtrace:
         com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000->0xffffff7f82a1cfff
         com.apple.iokit.IOSCSIBlockCommandsDevice(3.5.1)[E4EAAA05-F607-3299-AE72-998D19 A5EA17]@0xffffff7f82aae000->0xffffff7f82ac3fff
            dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000
            dependency: com.apple.iokit.IOStorageFamily(1.8)[5BA4CD36-E96D-3A9E-ADFF-A863BBD63BC7]@0xff ffff7f8297c000
         com.seagate.driver.PowSecDriverCore(5.2.2)[F1208D07-4D35-0191-3638-3D7CA8C9D5CF ]@0xffffff7f82b69000->0xffffff7f82ba1fff
            dependency: com.apple.iokit.IOUSBFamily(5.4.0)[C3094550-7F58-3933-A4F7-CD33AE83F8B9]@0xffff ff7f82a4c000
            dependency: com.apple.iokit.IOSCSIBlockCommandsDevice(3.5.1)[E4EAAA05-F607-3299-AE72-998D19 A5EA17]@0xffffff7f82aae000
            dependency: com.apple.iokit.IOStorageFamily(1.8)[5BA4CD36-E96D-3A9E-ADFF-A863BBD63BC7]@0xff ffff7f8297c000
            dependency: com.apple.iokit.IOSCSIArchitectureModelFamily(3.5.1)[4CCC048B-060B-3C07-8D85-A8 4CEA02CD25]@0xffffff7f829f2000
            dependency: com.apple.iokit.IOFireWireSBP2(4.2.0)[2B060BAD-9A9B-3A52-A742-A37CDFC59570]@0xf fffff7f82b4b000
last loaded kext at 1223700924328: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f84440000, size 16384)
last unloaded kext at 1481342745694: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f84440000, size 12288)
loaded kexts:
com.pogoplug.filesystems.ppfs          2010.10.7
com.seagate.driver.PowSecLeafDriver_10_5          5.2.2
com.seagate.driver.PowSecDriverCore          5.2.2
com.apple.driver.AppleMikeyHIDDriver          122
com.apple.driver.AudioAUUC          1.60
com.apple.driver.AppleHDA          2.3.1f2
com.apple.driver.AppleBluetoothMultitouch          75.15
com.apple.driver.AppleHWSensor          1.9.5d0
com.apple.iokit.IOUserEthernet          1.0.0d1
com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
com.apple.Dont_Steal_Mac_OS_X          7.0.0
com.apple.driver.AGPM          100.12.69
com.apple.driver.AppleMikeyDriver          2.3.1f2
com.apple.filesystems.autofs          3.0
com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.ApplePolicyControl          3.2.11
com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
com.apple.driver.AppleLPC          1.6.0
com.apple.driver.AppleBacklight          170.2.3
com.apple.driver.AppleUpstreamUserClient          3.5.10
com.apple.driver.AppleMCCSControl          1.0.33
com.apple.kext.AMDFramebuffer          8.0.0
com.apple.ATIRadeonX2000          8.0.0
com.apple.driver.AppleUSBCardReader          3.1.0
com.apple.driver.AppleIRController          320.15
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
com.apple.BootCache          34
com.apple.iokit.SCSITaskUserClient          3.5.1
com.apple.driver.XsanFilter          404
com.apple.iokit.IOAHCIBlockStorage          2.2.2
com.apple.driver.AppleUSBHub          5.2.5
com.apple.driver.AppleFWOHCI          4.9.6
com.apple.driver.AirPort.Atheros40          600.70.23
com.apple.driver.AppleAHCIPort          2.4.1
com.apple.nvenet          2.0.19
com.apple.driver.AppleUSBEHCI          5.4.0
com.apple.driver.AppleUSBOHCI          5.2.5
com.apple.driver.AppleEFINVRAM          1.6.1
com.apple.driver.AppleRTC          1.5
com.apple.driver.AppleHPET          1.7
com.apple.driver.AppleACPIButtons          1.6
com.apple.driver.AppleSMBIOS          1.9
com.apple.driver.AppleACPIEC          1.6
com.apple.driver.AppleAPIC          1.6
com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
com.apple.nke.applicationfirewall          4.0.39
com.apple.security.quarantine          2
com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
com.apple.driver.AppleBluetoothHIDKeyboard          165.5
com.apple.driver.AppleHIDKeyboard          165.5
com.apple.driver.DspFuncLib          2.3.1f2
com.apple.driver.IOBluetoothHIDDriver          4.0.9f33
com.apple.driver.AppleMultitouchDriver          235.28
com.apple.iokit.IOSurface          86.0.3
com.apple.iokit.IOSerialFamily          10.0.6
com.apple.iokit.IOBluetoothFamily          4.0.9f33
com.apple.kext.triggers          1.0
com.apple.iokit.IOFireWireIP          2.2.5
com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
com.apple.driver.AppleUSBAudio          2.9.0f6
com.apple.iokit.IOAudioFamily          1.8.9fc10
com.apple.kext.OSvKernDSPLib          1.6
com.apple.driver.AppleHDAController          2.3.1f2
com.apple.iokit.IOHDAFamily          2.3.1f2
com.apple.driver.AppleSMC          3.1.4d2
com.apple.driver.IOPlatformPluginLegacy          1.0.0
com.apple.driver.AppleSMBusPCI          1.0.10d0
com.apple.driver.IOPlatformPluginFamily          5.2.0d16
com.apple.driver.AppleGraphicsControl          3.2.11
com.apple.driver.AppleBacklightExpert          1.0.4
com.apple.driver.AppleSMBusController          1.0.10d0
com.apple.iokit.IONDRVSupport          2.3.5
com.apple.kext.AMD4600Controller          8.0.0
com.apple.kext.AMDSupport          8.0.0
com.apple.iokit.IOGraphicsFamily          2.3.5
com.apple.iokit.IOUSBHIDDriver          5.2.5
com.apple.iokit.IOUSBMassStorageClass          3.5.0
com.apple.driver.AppleUSBMergeNub          5.2.5
com.apple.driver.AppleUSBComposite          5.2.5
com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
com.apple.iokit.IOBDStorageFamily          1.7
com.apple.iokit.IODVDStorageFamily          1.7.1
com.apple.iokit.IOCDStorageFamily          1.7.1
com.apple.iokit.IOFireWireSBP2          4.2.0
com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
com.apple.iokit.IOAHCISerialATAPI          2.5.0
com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
com.apple.iokit.IOUSBUserClient          5.2.5
com.apple.iokit.IOFireWireFamily          4.5.5
com.apple.iokit.IO80211Family          500.15
com.apple.iokit.IOAHCIFamily          2.2.1
com.apple.iokit.IONetworkingFamily          3.0
com.apple.iokit.IOUSBFamily          5.4.0
com.apple.driver.NVSMU          2.2.9
com.apple.driver.AppleEFIRuntime          1.6.1
com.apple.iokit.IOHIDFamily          1.8.0
com.apple.iokit.IOSMBusFamily          1.1
com.apple.security.sandbox          220
com.apple.kext.AppleMatch          1.0.0d1
com.apple.security.TMSafetyNet          7
com.apple.driver.DiskImages          344
com.apple.iokit.IOStorageFamily          1.8
com.apple.driver.AppleKeyStore          28.21
com.apple.driver.AppleACPIPlatform          1.6
com.apple.iokit.IOPCIFamily          2.7.2
com.apple.iokit.IOACPIFamily          1.4
com.apple.kec.corecrypto          1.0

Dreamweaver CS6 on Mac - Retina Display not being used properly.

Similar Messages

Maybe you are looking for