Dreamweaver Cs6 Uploading to remote server to web-host,the.swf files do not load on the webpage

all the content works fine with the file path being the computers harddrive  :/C "etc"
once i upload to webhosting server all the swf files don't work.
My website is fully complete and ready to go on the web can someone help me and tell me why my content is not showing.
the webhosting customer service rep told me i need to upload with media files checked? im like i never heard of that lol.

The links in the webpage all point to your local hard drive
<param name="movie" value="file:///C|/Users/lol/Documents/Website flash art 5.swf" />
No-one can see these links except you.
This suggests that you have not defined a site in Dreamweaver
http://www.adobe.com/devnet/dreamweaver/articles/first_website_pt1.html
Is this the case?

Similar Messages

  • Flash movie won't play on testing or remote server in web page

    I have a Flash slideshow that will only play in a browser if I click File > Open and open the .swf file locally and directly (not in a web page). It has never played in a webpage, remotely on the web server or locally on the Wamp server. It plays correctly in Flash when I test it.
    I have tried uploading the HTML page that Flash generates (without any changes), and it won't even play in that file. I have also tried using Dreamweaver's "Insert Flash" feature, and that was no good either.
    Here is the direct link to the .swf:
    http://www.farrelldoc.com/glw/greenlilysample.swf
    Here is the page that Flash generated:
    http://www.farrelldoc.com/glw/greenlilysample.html
    Here is the page I created using Insert Flash:
    http://www.farrelldoc.com/glw/home.php
    Any help is greatly appreciated! I have a demo tomorrow, and I just have to get this figured out. I'm at the end of my rope!
    Thanks so much!
    Karen

    No, unfortunately, that didn't work.
    BTW, I had to move the files because I now have a 500 error on the original directory due to my first attempt at installing CMS. (I will be getting my money back for that software.) Here is the location of the new stuff:
    Here is the direct link to the .swf:
    http://www.farrelldoc.com/gle/greenlilysample.swf
    Here is the page that Flash generated:
    http://www.farrelldoc.com/gle/greenlilysample.html
    Here is the page I created using Insert Flash:
    http://www.farrelldoc.com/gle/home.php

  • Dreamweaver can't determine remote server time

    I've got two websites that were working just fine last week.
    Now I can connect to them, but I can't see the files/folders on the
    remote server and I get the following error: "Dreamweaver can't
    determine remote server time". Can anyone tell me how to fix this?

    Any recent changes to your firewall or network environment?
    http://www.macromedia.com/cfusion/knowledgebase/index.cfm?id=tn_14834
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    ==================
    "SaraML" <[email protected]> wrote in
    message
    news:fndp03$d6k$[email protected]..
    > I've got two websites that were working just fine last
    week. Now I can
    > connect
    > to them, but I can't see the files/folders on the remote
    server and I get
    > the
    > following error: "Dreamweaver can't determine remote
    server time". Can
    > anyone
    > tell me how to fix this?
    >
    >

  • Do I get charged for any uploading (possibly even from my web host) when people download a podcast that I have created?

    Do I get charged for any uploading (possibly even from my web host) when people download a podcast that I have created?

    Not as far as iTunes is concerned: hosting a podcast there is free. However the media files are kept on your server - your ISP or a hosting service - and there may be a limit to bandwidth. If you podcast turned out to be extremely popular then the number of downloads might exceed the allowable bandwidth from your server in a given period and lead to an extra charge or possibly blocking until the period was over: this is something you would have to check with them.

  • Remote Server returned '530 5.7.1 Client was not authenticated'

    Hello,
    I migrating from Exchange 2007 to Exchange 2013.
    The Exchange 2007 infrastructure look like:
    -2 CAS ( Hub1 and Hub2)
    -2 MBX ( mbx1 and mbx2)
    We add Exchange 2013 in the mix
    2 CAS ( CAS-2K13-1 and CAS-2K13-2)
    2 MBX ( MBX-2K13-1 and MBX-2K13-2)
    All mailbox are curently on Exchange 2007. All inbound email pass by a SMTP Relay who forward the email to a NLB of Exchange 2013.
    The send connector (internet) forward email to the SMTP relay, and the source server are only 2K7 server.
    My problems is : if I replace the two 2K7 server from the source server for the 2K13 MBX, I receive this message:
    The following organization refuse your message: MBX-2K13-1.contoso.com
    Generation server :  MBX-2K13-2.contoso.com
    [email protected]
    MBX-2K13-1.contoso.com  
    Remote Server returned '530 5.7.1 Client was not authenticated'
    idea?

    Do you smarthost from the send connector to another SMTP gateway?
    Twitter!: Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

  • Configure DNS on Snow Leopard Server for Web Hosting

    Hi Everyone,
    I put together an article on my blog about Snow Leopard DNS setup for web hosting. http://www.mkahn.com/?p=279
    I'll be revising it over the next few weeks to make it more informative based around feedback. Let me know if you have any questions or trouble setting up DNS on Snow Leopard Server for web hosting.

    Thanks for your replies. I realize I'm not making clear the way this network is configured . Also, the only services running on the Snow Leopard server are (at this time):
    dhcpd - in the 10.136.31.x range;
    dns - same as before;
    planned to add are:
    Open Directory (for network logins)
    Software update;
    Web (only on the 10.136.31.x Ethernet);
    mySQL (localhost only - for moodle);
    NAT is not set up on the Snow Leopard server itself. We have an outside router, a Cisco 2811. This router provides routing for both the public IP range, and the NAT range is configured in this router. The forwarding dns is located in LR and Fayetteville. So what I need is dns on Snow Leopard to forward outside queries to the state DNS servers, and resolve the local NAT IP only for Open Directory and a set of Snow Leopard clients.
    Is this going to be possible?

  • Launch Console fails: the vnc viewer is not installed on the manager server and no local vnc viewer is found.

    Hello,
    I have created and started a VM image and try to configure this image, but when launching the console I get the error:
    "the vnc viewer is not installed on the manager server and no local vnc viewer is found."
    I've read the vnc console does not rely on a local version of the vnc client, but uses the java vnc.  From the java log I get:
    Java Web Start 1.6.0_43
    Using JRE version 1.6.0_43-b01 Java HotSpot(TM) Client VM
    User home directory = C:\Users\kgraaf
    28-jun-2013 10:17:04 com.oracle.ovm.ras.proxy.RasProxyApplet main
    INFO: ServiceType : VNC
    28-jun-2013 10:17:04 com.oracle.ovm.ras.proxy.external.ViewerLauncherFactory getViewerLauncher
    INFO: Os is : windows 7
    It is not clear to me yet what is expected to be running where. My configuration is:
    - VM Server 3.1 on Linux host A
    - VM Manager 3.1 on Linux host B
    - Connected via Windows 7 64-bit client via a browser to the Management Server. Let's call this host C
    When launching the console it tries to connect to 127.0.0.1:60505 so to localhost and a port#.
    - Given this information I would expect it tries to launch the vncviewer from my management server (host B).
    - /usr/bin/vncviewer is installed on host B, but this appears not to be used.
    - We see java vnc is started on my Windows 7 client (host C) and it tries to connect to 127.0.0.1 (localhost on my Windows client??) and not to the remote management server (host B)!?
    Questions:
    1 - Can someone explain what exactly is being executed (from where and to which host) when launching the console?
    2 - Is this a java version / Windows 7 related configuration issue? How to fix this?
    Thanks,
    Klaas.

    Per Oracle's website - RAN into this a few hours ago...Do it as ROOT on the VM Manager Host
    http://docs.oracle.com/cd/E26996_01/E18548/html/BABFBEIF.html
    It is preferred that you install either TightVNC on the Oracle VM Manager host computer. You can get the latest TightVNC package from:
    http://oss.oracle.com/oraclevm/manager/RPMS/http://oss.oracle.com/oraclevm/manager/RPMS/
    Install TightVNC with the command:
    # rpm -ivh tightvnc-java-version.noarch.rpm

  • When I tried to update, I got this message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator" What do I do???

    I am running version 3.6.22 and would like to update. However when I tried to update from the Mozilla web site I got the message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator"
    What do I do now?? Paul Stager [email protected]

    I have tried downloading the file several times and get the same message: "No data received." I have no other system problems, I navigate well to other sites, but I'm unable to download this upgrade. Any suggestions?

  • There was a problem connecting to the server. URLs with the type "file:" are not supported. OK

    I have just upgraded to Mountain Lion from Leopard, but now I keep getting this message when I open some web-pages and every time I wake the Mac up after going to sleep. For some odd reason I get it in Swedish sometimes (installed language) and some times in English...
    There was a problem connecting to the server.
    URLs with the type "file:" are not supported.
    OK
    What is this and how can I get rid of it. I use Firefox and have updated to latest version.

    Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

  • Problem in WAD (The requested query / does not exist on the current server)

    Dear Guru's
    When i execute a Web Application in WAD in the selection screen suppose if i give Key product  as 86000 then check and execute i get correct data. Then if i come to  backpage (Selection screen again using backspace) and change Key product  as 86022  then check and execute then i get following error
    The requested query / does not exist on the current server
    System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
    Can any one please provide me some good solution...
    We are using BI 7.0 sp 16, But i am executing this Wed Application in 3.1WAD.
    Thanks and Regards,
    kalyan

    Dear Jai,
    Issue is in WAD selection screen for first product valuse every thing if fine, when i go back and change product value and then CHECK and EXECUTE the following error comes.
    The requested query / does not exist on the current server
    System error in program CL_RSR_OLAP_VAR and form BAD STATE (see long text)
    Any one have any idea plssssssssssssssssssssssssssssssssssss..........
    dude's some soln.....
    Thanks and Regards,
    Dev
    Edited by: Srinivas dev on Jul 4, 2008 2:45 PM

  • Aspnet_compiler web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'

    My latest MVC 5 project built with VS 2013 compiled and works fine on my PC but can not be published to server using command line aspnet_compiler. I kept getting the web.config(132): error ASPCONFIG: Could not load type 'System.Data.Entity.Design.AspNet.EntityDesignerBuildProvider'
    In my web.config file, I have the following as suggested by many for solution:
    <add assembly="System.Data.Entity, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
     <add assembly="System.Data.Entity.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"/>
    However, the error is persisting.  I have no clue how to fix this.  Hope someone can help.

    Hello FredVanc,
    As you mentions, it could work with your develop environment, so I am wondering it is that on the server machine, the assembly is not there actually. Here are some information I found which might be helpful:
    https://support.microsoft.com/en-gb/kb/958975?wa=wsignin1.0
    https://social.msdn.microsoft.com/Forums/en-US/1295cfa8-751b-4e9b-a7a7-14e1ad1393b6/compiling-error?forum=adodotnetentityframework
    By the way, since this issue is related with ASP.ENT project, I suggest that you could post it to the ASP.NET forum, there are web experts will help you:
    http://forums.asp.net/
    Regards.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for

    I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
    Currently use a Mac with the latest Mavericks 10.9.4

        Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
    What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
    It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
    Tamara H.
    Follow us on Twitter @VZWSupport

  • Content file download failed. Reason: HTTP status 404: The requested URL does not exist on the server.

    Hi,
    I am getting this error in most of our WSUS servers.
    Content file download failed.
    Reason: HTTP status 404: The requested URL does not exist on the server.
    Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe 
    Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
     After few minutes, getting below error as well. But i could see the synchronization has completed successfully.
    Log Name:      Application
    Source:        Windows Server Update Services
    Date:          12/19/2014 4:45:55 PM
    Event ID:      10032
    Task Category: 7
    Level:         Error
    Keywords:      Classic
    User:          N/A
    Computer:      ******
    Description:
    The server is failing to download some updates.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
      <System>
        <Provider Name="Windows Server Update Services" />
        <EventID Qualifiers="0">10032</EventID>
        <Level>2</Level>
        <Task>7</Task>
        <Keywords>0x80000000000000</Keywords>
        <TimeCreated SystemTime="2014-12-19T08:45:55.000000000Z" />
        <EventRecordID>496887</EventRecordID>
        <Channel>Application</Channel>
        <Computer>*****</Computer>
         <Data>The server is failing to download some updates.</Data>
    This error is happening everyday. Please advise for a fix.

    Reason: HTTP status 404: The requested URL does not exist on the server.
    Source File: /Content/FB/134501186F4C81089054E4EC3376E74EEC895EFB.exe 
    Destination File: d:\wsus\WsusContent\FB\134501186F4C81089054E4EC3376E74EEC895EFB.exe
    Source:        Windows Server Update Services
    Description:
    The server is failing to download some updates.
    This error is happening everyday. Please advise for a fix.
    If this is happening on an UPSTREAM server it is because you have approved updates that are no longer available from Microsoft. Almost always this involves approvals of *EXPIRED* updates (which have been pulled from the catalog and cannot be downloaded).
    If this is happening on a DOWNSTREAM server it's because something/someone deleted the files from the upstream server. It can also happen if the entire upstream ~\WSUSContent folder has gone amuk.
    For an upstream server, find the expired updates, remove the approvals, cancel the downloads, and then decline the updates.
    For a downstream server, figure out what the affected updates are and fix the upstream server.
    Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
    SolarWinds Head Geek
    Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
    My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
    http://www.solarwinds.com/gotmicrosoft
    The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

  • WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

    Question
    WHEN I GO TO PRIVACY SETTINGS AND CLICK ON EXCEPTIONS AND TYPE IN A WEB ADDRESS TO ALLOW ALL THE TIME IT DOES NOT SAVE IT THE NEXT TIME I SIGN ON TO FIRE FOX IT IS LOST. IT WORKS FINE ON MY DESKTOP BUT NOT ON MY LAPTOP THAT I JUST BOUGHT in English.

    I just updated my whatsapp...clicked on whatsapp in appstore and now can access my whatsapp

  • When I try to same an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!

    When I try to save an image under the command 'save as' it will only let me save as file types 'firefox document' or 'all files' and when I try to look at them later they dont work. How can I save an image as the same file type it is on the web site?!
    == This happened ==
    Every time Firefox opened
    == I updated to one of the firefox versions (Not sure which one it was)

    Thanks Alex, but sadly I already tried that. Neither .docx or .xlsx files show up in the content list. They both show as a Chrome HTML document so changing how Firefox addresses those doesn't help since it thinks its the same type of file. I don't think I can manually add files into the "Content Type" left side nav.

Maybe you are looking for

  • Dual "desktop" for two users

    Hello! Here's my need: a Mac Pro with OS X Tiger 10.4.11, used by its usual user. A second user needs another computer for light works only (web browsing and pictures viewing). I'd like to connect a second keyboard, a second mouse and a second displa

  • Warehouse capacity values

    Hello All, I am looking for the the functionality in SCM that would help my organisation put "capacity" for warehouse/plant may be for every day or even every hour so when when the order scheduling takes place, it takes into account the capacity and

  • ADF 10.1.3.5 application on Fusion Middleware 11.1.2.1

    Hi, We are trying to migrate ADF 10.1.3.2 application to 10.1.3.5 and deploy on Fusion Middleware 11.1.2.1. Steps followed – 1. Created a domain for ADF 10.1.3.5 applications 2. Applied ADF 10.1.3.5 runtime to the domain 3. Migrated ADF 10.1.3.2 appl

  • Mail, receiving but not sending

    Mail is playing up after I installed a new Snow Leopard system. I can receive but not send. As far as I can tell I have all the right settings. My (don't tell anyone) PC laptop works perfectly.Can anyone tell me where I should be looking?

  • ERP-MM

    how to do account assignment for material in MM