Dreamweaver CSS styles page goes blank after I preview in browser

Often, after I have previewed in browser, when I return to my CSS styles sheet it is blank. I need to then close Dreamweaver - it then crashes and reopen. This happens to often making it difficult to use dreamweaver. Any ideas other than re-installing or upgrading?
Thanks
adam

Hi Ken,
Unfortunately, this problem didn't go away with the re-install. It occurs maybe once every 5-10 previews.
I have Dreamweaver CS5.5 and Windows 7 on my PC. Once the styles sheet blanks after I preview in browser I need to close Dreamweaver (at which point it crashes and I need to do it through Task Manager) and load up again.
Regards,
Adam

Similar Messages

ERecruitment external candidate registration pages goes Blank after SPS7

HI All ,
We have recently upgraded our system from NW 701 SPS3 to SPS7 .
Information :
Our eRecruitment setup is , External candidates will login through a
different server and we have eRecruiting integrated with the ERP but with
the frontend for the External Candidate on a different
server.
We have checked the SICF nodes (active)and Trex working fine , however when a
candidate registration page or job search is opened the page remains
blank .
The logs in SM21 are as below when we tried to reproduce the same .
RCF_UNREGSER R2 G HTTP/RFC session has been deleted following timeout
Can you please guide us on this .
Regards
Rahul

Hi all ,
I myself resolved the issue thanks
Regards
Rahul Shady

TS1368 When I open iTunes store the page goes blank on my MacBook

When I open iTunes store it shows the loading bar, it goes to about half and then the page goes blank and I can do nothing but go back to my library. What can I do?

All software has bugs. Try closing the Camera app via the phone's taskbar and do a soft-reset of your phone, and/or update to the iOS 8.2 which was released yesterday).
Closing an app : Force an app to close in iOS - Apple Support
Soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the equivalent of a reboot.

Screen goes blank after a few mins, no matter what I do

I have a slight problem: I ran an update, which brought me a brand-new shiny kernel and a brand-new shiny xorg-server. It took me a few days until I bothered to reboot my computer and after that things got hairy.
After a few minutes, screen goes blank.
I set a screensaver of my Gnome desktop to 2 hours, no effect.
Power manager sliders have exactly to positions: 2 hours 1 minute and never, neither one has any effect on this.
I said 'xset dpms force on', no effect.
Even when I try to watch a movie with mplayer, screen still goes blank after a few minutes (usually mplayer inhibits this kind of stuff).
Now, I find it really hard to believe that this could be any hardware issue, after all, if video card or display would be faulty, I would probably either get a picture on the screen or don't get a picture on the screen, not some unwanted screen suspend every few minutes.
So I have to assume it's a software thing. Kernel doesn't seem very likely to be the guilty one, so I guess it is that steaming pile of crap we know as xorg-server, which got upgrade from 1.6.1 to 1.6.1.901 (sounds like wannabe-1.6.2), to be take the blame here.
There is no 1.6.1 package in the cache or in any repos I checked, so hard to downgrade. Of course I could hack some pkgbuild from AUR and install that, but somebody told me that I would probably also have to compile drivers against that so if that's correct (is it?), then I would consider that as a last option.
Any ideas?

http://bbs.archlinux.org/viewtopic.php?id=70733&p=1

Screen goes blank after 10 secs when i access hotmail

my screen has been going blank after 19 secs when I open Hotmail or the farmville game. The audio however is fine but the screen turns blank (grey).
This problem started after I downloaded IOS 5 for my iPad on the imac and then synchronised my itunes from iMac to iPad. I alsoactivated i Cloud.

Yeah, I think it must just be an insanely infrequent occurrence, since no one on here has replied in a couple days besides you. I know the screen is supposed to stay on the entire time that there is an incoming call from the lock screen now, since I had a chance to ask a few friends that just got iphones as well. I'm thinking a restore would fix the problem, although I think I'm just going to wait until there is an update, which I would assume would be soon, before I do the restore, since its just an annoyance and not a problem.

When i open the itunes store, the screen goes blank after 2 seconds so I cant order music

When I open the itunes store, the screen goes blank after 2 seconds, so I cant order any music?

same thing with me have you found an answer? the only thing i cant think of is to download the new itues but when i try they are haveing problems with the site or something and i cant dowload it.

When I sign in to hotmail, my emails appear then I have errors and the page goes blank. Any help ? I'm on OS X 10.5.8

when I sign in to hotmail, my emails appear then I have errors and the page goes blank. Any help ? I'm on OS X 10.5.8
Sorry should have said, when I log in my emails pop up momentarily. Then, it seems as if the pages aren't loading. A message comes up on the bottom left that the pages are loading, then errors occur and nothing happens.
Thanks

i tried to access kb.mozillazine.org and the following error message was returned:
ERROR
The requested URL could not be retrieved
While trying to retrieve the URL: http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
The following error was encountered:
* Read Timeout
The system returned:
[No Error]
A Timeout occurred while waiting to read data from the network. The network or server may be down or congested. Please retry your request.
Your cache administrator is root.
Generated Tue, 07 Jun 2011 10:04:45 GMT by sunrise-squid.mz.osuosl.org (squid/2.5.STABLE11)
I have tried to access your link, or just kb.mozillazine.org several times over the past hour without success...

When I search for an artist in itunes, the songs will pop up and then the page goes blank?

When I search for an artist in itunes, the songs pop up briefly, but once the page loads completely, the page goes blank.

I'm having the same difficulty. I'm running Windows Vista with iTunes 9.0.3.15. iTunes opens up just fine and I can get to the Store's homepage, but when I try and search for a song, the results just flash on the page for 2 seconds and then it's all gone....I'm left with one big, empty box. If I'm quick, sometimes I can click on a random song and I can hear the sample played, but then it's gone again while the song is playing.
Guess I won't be buying anything more from iTunes...
Tried to ask about this problem here: http://www.apple.com/ca/support/itunes/contact.html
I'll post any response I receive.
Maybe you can try contacting them too to see what they have to say?

Since Firefox v34, after zooming text on a page Google Search took me to, the Google search page is blank after clicking 'Back' to it. Is this a v34 glitch?

Since Firefox v34, the Google Search results page is blank after, 1) Clicking on a link in a Google Search results page and loading the linked page, 2) Zooming in on the text on the page Google took me to, and then without resetting text zoom, 3) Clicking the Firefox 'Back' arrow to return to the Google search results. If at that point I either reload the Google results page, or click back a page and then forward again, the full search results are then displayed again.
This happens on my Windows 7 PC as well as my Vista Notebook. Is this a glitch with text zooming and Google in Firefox version 34?

'''>>Type about:preferences#advanced<Enter> in the address bar.<'''
Setting that made no difference. I ran 30-40 test searches on Google with that set and Firefox restarted in Safe Mode with all add-ons disabled. The problem persists on the vast majority of searches. However backing up to Google search results after following some links doesn't result in the problem.
For instance when I do a Google search from www.google.com (USA) on [https://www.google.com/?gws_rd=ssl#q=%22Steve+Gibson%22+ "Steve Gibson"] and click the first result, which for me is his Wikipedia page: [http://en.wikipedia.org/wiki/Steve_Gibson_%28computer_programmer%29 "Steve Gibson (computer programmer) - Wikipedia"]. If I hit CTRL/+ a couple times to zoom text after the page loads, and then click Firefox's 'Back" icon, the previous Google search result page will be empty.
However if I click on the 2nd result in Google's search results, which for me is [https://www.grc.com/stevegibson.htm "GRC | Steve Gibson's WebZone:"], I can zoom the text several times and then click back to the Google search results and find them all displayed fine.
But I've been having this problem when backing up to Google search results probably 70-90% of the time since I updated from Firefox v33 to v34.
It's frustrating because Firefox seems to remember the text zoom level for entire domains. So if I zoom on one Wikipedia page, Firefox will display all Wikipedia pages I visit subsequently at that zoom level. I used to love this feature. But it's become a real pain now when I back up to Google.
BTW: If in the 1st example above, I first reset the text zoom level while I'm still on the Steve Gibson Wiki page, all the Google search results are displayed fine after I click Firefox's 'Back" icon. I don't have this problem in Chrome or Opera.

IPhone 4 screen goes blank after lock screen

My iPhones screen works perfectly on the lock screen but as soon as i enter the passcode it goes blank.
Its still fully functional in terms of recieving calls, vibrating, screenshotting etc. but what could i do to fix it.
I've already tried reseting the settings by holding the home and sleep button at the same time.
What else can I do?

I'm sorry, but this makes no sense. What do you mean by "screenshotting"? How can you tell anything is working if the screen goes blank after you enter the passcode?
If a reset didn't fix it, try a restore. If that doesn't fix it, restore it as a new device.

Please help - my N82 realplayer goes blank after 3...

now i know that the N82 may be considered a dated model by todays standards, but bear with me because i finally got one (and a used one at that too). two weeks into owning it and i love it already.
the firmware says:
v31.1.0.16
09.12.08
RM313
i've spent days checking out available add-ons, installing and uninstalling them (also hugely due to the advice i only discovered about installing to the phone memory for better performance). so i've pretty much got it up to the kind of phone i can be proud to carry around.
i face one problem - realplayer goes blank after 3 seconds of playing any video.
i did all these:
- dragged and dropped videos from my pc to phone storage (My Videos)
- copied videos to phone memory (My Videos also)
- converted the videos to mp4, and also 3gp using xilisoft converter before transferring
- tried using Nokia Nseries Video Manager. gave up because it was so user-unfriendly. i could only copy back to pc; i could not find any way to convert and transfer to phone in there
none of these could make realplayer play videos past 3 seconds. i could hear audio though.
the strange thing is realplayer plays when i click on a video in file manager. it does not auto rotate to landscape mode, and does not play more than the file i click on.
can someone help me? sorry i had to post here. i googled for answers, saw a lot of posts from n95 users saying the same thing but didn't see any solution posted. i could not find anything in the boards here either. i would much rather fix this single issue than to perform an update for fear of losing everything i have done in my phone so far.
thanks in advance

Thank you guys for all your solutions. Problem solved on my own (again).
Despite being smartphones, Nokia phones (well, mine anyway) behave erratically when loaded with applications and games, but most expecially with too many themes onboard.
Install one theme too many and you'll start seeing how badly the N82 copes with performing as it did out of the box.
I've had these few nagging issues, which I solved on my own without having to resort to a soft reset or a hard reset or a firmware update or a reformat like everyone suggests without thinking, THANKFULLY.
1. Realplayer doesn't display video in landscape mode
- Bring the number of installed 3rd party themes down to a minimum
- start uninstalling applications, beginning from the most recent one, and check realplayer each time.
2. Multimedia button won't bring up Gallery
- Bring the number of installed 3rd party themes down to a minimum
- Restart phone and see if it does the second time around
- Uninstall the most recent application/s and check again
3. "Help" is not accessible from the menu. It says "Memory full" every time
- Bring the number of installed 3rd party themes down to a minimum
- Start uninstalling applications again, and recheck.
4. Camera recording works fine for 10 seconds, then it stutters every 5 seconds
- If you are using a new memory card like I did, just perform a format from the phone and not the computer before using it. I used it without formatting it so it was my fault.
(but I cannot believe I had to find this solution outside the Nokia boards)
Do I hate my N82? No, I love it.
Do I hate encountering problems on my phone? Of course I do.
It's a great phone, capable of delivering more than other phones if you exploit it like I do, but I wish the developers have the decency to put up a list of common problems and fixes for the phones they roll out, not leave it the hands of discussion board "wizards" and "gurus" to solve your mistakes.

Every time I load a webpage it says reader and tha page goes blank. how do you disable reader on the

Every time I load a web page it says reader and the page goes blank. How to disable reader?

What?

My screen goes blank after I see the white start up screen

My screen goes blank after I see the white start up screen

What kind of iMac do you have? A PowerPC G3, G4, G5, or an Intel-based iMac? What OS are you using? OS 9, OS 10.2.x Jaguar, 10.3.x Panther, 10.4.x Tiger, 10.5.x Leopard, 10.6.x Snow Leopard, 10.7.x Lion, 10.8.x Mountain?
This particular forum is for older PowerPC G3, G4, G5 iMacs running OS 10.5.8 or older. If your iMac was made after 2006, then you have an Intel-based iMac.
That being said, here are a few tips to try:
Option 1
Restart the computer while holding down the Option key. This will tell the computer to look for bootable drives. If it finds your normal startup disk, select let, then click the right pointing arrow to boot up the computer. Now open up System Preferences> System> and select your normal Startup OS as the default startup disk.
Option 2
Reset your PRAM. Press and hold down the Command Option P R keys while starting your computer. You will hear the startup chime. continue holding down those keys until you hear the startup chime a second time. Release the keys. If the computer restarts, you will need to reset your Date and Time. It might be time to replace your PRAM battery.
Option 3
Reset the SMC by removing all cables (USB, Firewire, Ethernet, Modem, Power cord) from the back of your computer. Let it sit for one minute. Press and hold the power on button on the back of the iMac while plugging in the power cord. Release the power on button. Count to five, the press the power on button again.
Option 4
Place your original, came with the iMac when purchased install disk, into the slot on the iMac, press and hold the C key while pressing the power on button on the back of the computer. (If you have upgraded your OS from when you purchased your iMac, example your iMac came with OS 10.3 installed, and you're now using OS 10.5, then use the OS 10.5 Retail Install disk that you had used to upgrade your OS instead of the original, came with the iMac disk.)
Continue holding the C key until you see the OS starting to load. DO NOT do an OS installation. At the top Menu bar, select Utilities or Utility, and pull down to Disk Utility. On the left side of the window that opens,select your normal OS drive. Click First Aid at the top middle of the window if it isn't already selected. Click Repair Disk from the lower right area of the window. When that is done, click Repair Permissions to the left of the Repair Disk button you clicked earlier.
When that is done, quit Disk Utility. From the top Menu bar (I think its under Utilities) select the Start Up Manager, and choose your normal boot volume as the startup disk. Restart the computer. If successful, and you've rebooted from your normal startup disk, eject the install DVD/CD, and you're good to go.
Good luck.

PDF Preview kicks out to Acrobat 7 and Body Pages goes blank

Two problems, and I suspect they are related...
I just purchased and installed Acrobat 7 Professional with Adobe Designer.
FIRST--The PDF Preview in Designer automatically kicks the preview out to Acrobat 7 and does not preview in Designer. Why???
SECOND--When I click back to Body Pages, for no reason after a little while the workspace goes blank (back to sheer white). It takes about 5 seconds for that to happen--and it happens inconsistently. It seems strange.
Can anyone help???
OS/ Windows XP sp2
Gateway M675 with tons of power and RAM

It's a rare thing indeed when you can answer your own posts.
I did a "detect and repair" in Acrobat 7.0 Professional, which seemed to fix the problem.
I had loaded Acrobat Reader 7 after the initial install of Acrobat 7.0 Professional, and am wondering if that didn't cause the problem somehow.
Anyway, if anyone else has this problem, you might want to try the "detect and repair."
Let's hope the problem is fixed for good. :-)

Acrobat 7 document goes blank after digital signature

Secretary creates document on network drive. When a manager digitally signs the document it goes blank. Acrobat Pro 7.1.4. After multiple tries the document will work. Can automatic saving be disabled during the signing procedure so that the document does not have to be recreated to be signed again.

Finally I found the solution.
The file size increase is a result of the embedded information used for long-term signature validation.
If you do not need this feature, you can turn it off:
Preferences > Security > Advanced Preferences > Creation tab
disable "Include Signature’s Revocation"
Help page: http://help.adobe.com/en_US/acrobat/X/pro/using/WS934c23d7cc8877da1172e0811fde233c98-8000. html
BR
Harald

Dreamweaver CSS styles page goes blank after I preview in browser

Similar Messages

Maybe you are looking for