Dreamweaver display inconsistency
Hi all
I'm working in Dreamweaver CS3 on a Mac running Leopard and
I'm developing a
site using CSS. I'm finding a display inconsistency inside
Dreamweaver and
previewing in the browser.
If you have a look at
http://www.garrybradley.co.uk/Screenshots/Screenshot.html
you'll see what I'm talking about.
I know there are many variables here with Macs and the way
they render type
but there's plenty of room for the 'clients' type cell to be
up with the
'services' one as in the browser view. It's difficult to
design a page
properly when certain elements do this and jump to another
line without
knowing why.
Has anyone come across this whilst laying out a page with
CSS?
OK I'm going to answer my own question here and it was all
about finding the
correct CSS value to alter. It was a 'menu ul' width setting,
it wasn't wide
enough. Now it is and it's fine.
I'll look before I leap next time.
On 24/01/2008 10:20 am, in article
C3BE16FD.3554%[email protected], "Garry Bradley"
<[email protected]> wrote:
> Hi all
> I'm working in Dreamweaver CS3 on a Mac running Leopard
and I'm developing a
> site using CSS. I'm finding a display inconsistency
inside Dreamweaver and
> previewing in the browser.
>
> If you have a look at
>
http://www.garrybradley.co.uk/Screenshots/Screenshot.html
> you'll see what I'm talking about.
>
> I know there are many variables here with Macs and the
way they render type
> but there's plenty of room for the 'clients' type cell
to be up with the
> 'services' one as in the browser view. It's difficult to
design a page
> properly when certain elements do this and jump to
another line without
> knowing why.
>
> Has anyone come across this whilst laying out a page
with CSS?
>
Similar Messages
-
Text appearance in adobe acrobat (pro) files displays inconsistently unless you zoom in. Mainly 'i's and 'l's look bigger than they should.
The pdfs print fine though.Try doing a spotlight search for all files that start with AdobeFnt. They will be named AdobefntXX.lst, with the XX being some number. They will be scattered across the drive... After making sure that all Adobe applications are closed, trash all the adobefntxx.lst files, those with the 3 letter extension .lst.
Then, restart the system, and open the files in Acrobat again.
Otherwise, what happens in Safe boot? (Remember, Safe boot loads only a default set of fonts.) If they display fine there, the problem most likely is a font issue, one of the fonts that Adobe installed.
Check Adobe's web support page for troubleshooting Fonts.
- or -
Contact Adobe about the whole issue, it is after all, Adobe Acrobat... Adobe's contact number is 800 833 6687. -
When you open Dreamweaver display error 213:19 what to do?
when you open Dreamweaver display error 213:19 what to do?
когда открываю Dreamweaver и Photoshop то показывает ошибку 213:19 что делать?Error installing CS6 on Mac OS X Yosemite (10.10)
Error 213:19 | Problem has occurred with the licensing of this product | Acrobat X and XI
Nancy O. -
Editing Text in Dreamweaver Display View
I have just started using Dreamweaver CS4. In older versions
of Dreamweaver, I'm used to seeing text in Display view and being
able to edit the text directly in Display view, rather than having
to edit text in Code view. But when I'm trying to edit text in
Display view on a webpage that has text in a scrollable window,
Dreamweaver does not allow me to scroll down the scroll box, so I
can't edit text that is lower down in the scrollable area.
Anybody have an idea on how I can accomplish this?
Thanks very much.
JasonThat would be the way....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"Osgood" <[email protected]> wrote in
message
news:go5tfn$r58$[email protected]..
> Double click in the scrollable area and see what
happens.
>
>
> jsaffer1 wrote:
>> I have just started using Dreamweaver CS4. In older
versions of
>> Dreamweaver, I'm used to seeing text in Display view
and being able to
>> edit the text directly in Display view, rather than
having to edit text
>> in Code view. But when I'm trying to edit text in
Display view on a
>> webpage that has text in a scrollable window,
Dreamweaver does not allow
>> me to scroll down the scroll box, so I can't edit
text that is lower down
>> in the scrollable area. Anybody have an idea on how
I can accomplish
>> this?
>>
>> Thanks very much.
>>
>> Jason
>> -
Dreamweaver displays differently Mac & PC
I have a file that renders fine in Dreamweaver MX or CS5.5 for Mac but in CS3 or CS5.5 for Windows it won't display correctly. It renders fine on the web. The issue seems to be with the interpretation of the CSS in the Windows version. The page backround which is supposed to be white renders navy blue and the headings which are anchors (using #tag) render as white on a white table so they can't be seen. Does anyone know of any specific quirks in the Windows versions that would cause this?
So you have 3 versions involved, MX, CS3 and 5.5. The MX and CS3 will both render different from one another and from CS5.5. The 5.5 version on Windows and Mac should render the same in all views. However, you should only worry about Live View and the browser and not Design view.
If you are having issues with things not rendering properly you should first run your page through the validator and if you need further assistance we will need to see one of the pages in question.
Validator: http://validator.w3.org/ -
Can dreamweaver display ?PHP include...
If I'm working on a client's site that uses includes with
ASP, dreamweaver will show the include for the asp pages, but if I
use includes in a PHP file, it won't show them (<?PHP include
'folder/file.inc' ?>)
Is there any plugin for dreamweaver, or any future addition
that will allow me to see all includes on a PHP page in
dreamweaver?DW will display those in Design view. Or are you talking
about in preview?
To see them in preview, you would need to have a PHP testing
server defined.
Do you?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"DJ James" <[email protected]> wrote in
message
news:ebt9r3$ksc$[email protected]..
> If I'm working on a client's site that uses includes
with ASP, dreamweaver
> will
> show the include for the asp pages, but if I use
includes in a PHP file,
> it
> won't show them (<?PHP include 'folder/file.inc'
?>)
>
> Is there any plugin for dreamweaver, or any future
addition that will
> allow me
> to see all includes on a PHP page in dreamweaver?
> -
CFFORM/Dreamweaver Display Issue
This is not exactly a Coldfusion question - but is sort of is
I just noticed that when I use <CFFORM>...</CFFORM> tags in Dreamweaver, Dreamweaver shows the form (in display mode) with an extra whitespace above the form. It doesn't display on the Web but it makes the document look different. If I temporarily change the CFFORM to HTML FORM tags, the space goes away.
The form is between 2 tables - but it seems to happen no matter where I move it
Anything I am missing on this?
Thanks,
hefterrThis is not exactly a Coldfusion question - but is sort of is
I just noticed that when I use <CFFORM>...</CFFORM> tags in Dreamweaver, Dreamweaver shows the form (in display mode) with an extra whitespace above the form. It doesn't display on the Web but it makes the document look different. If I temporarily change the CFFORM to HTML FORM tags, the space goes away.
The form is between 2 tables - but it seems to happen no matter where I move it
Anything I am missing on this?
Thanks,
hefterr -
Opening cfm file in dreamweaver displays unicode
hi. i'm brand new to coldfusion, and when i open a .cfm file
in dreamweaver 8, most of it is showing up in unicode. how do i
make it legible?
thanks!Ok, that makes sense. Thanks for explaining Coldfusion
Administrator to me. My problem is that I've been giving an
application built by a 3rd party vendor, and my boss would like to
know how much we will be able to edit the application in-house.
They have given us all of the .cfm files and we host the server
running the app, so I have access to the dbs as well. But whenever
I try to open these .cfm files I see the encrypted characters. Is
there any way for me to edit these pages? -
Yet another Dreamweaver Qwerk / Inconsistency
Alright, try this out step by step.
1) Open a page in an established site, in one of the
subdirectories. We will call it /subdir1/
2) Highlight some text and go to the "Properties" toolbar at
the bottom of the screen and click the yellow folder icon next to
the "Link" box.
3) Browse to another file in the same directory. Double click
it, and watch whats placed into the box. Most likely nothing other
than "filename.htm". Just as it should be.
4) Select some other text.
5) Click yellow folder and select a file in another
subdirectory, well call it /subdir2/
6) This will place the following into the box
"../subdir2/filename.htm" As it should.
All is well so far.
7) Now take that exact same linked-text and click the folder
icon
8) Select a file from the current directory (youre still in
subdir1 this whole time)
9) Watch what appears in the box: "/subdir1/filename.htm"
I already know some of you are going "Huh?" This is because
you didnt follow the instructions above. The rest of you see the
problem. When you are in SUBDIR1 and you link to another file in
SUBDIR1, it works fine. When you have a link that is linking to
another subdirectory, and change it to link to a file in the
current subdirectory, it adds the name of the subdirectory to the
HREF.
In other words, the exact same link shows up two different
ways:
filename.htm
/subdir1/filename.htm
Depending on whether its a new link being created, or if its
an existing link which was linking outside the directory.
This is difficult to describe but unless someone can explain
it to me, im calling it another Bug.It's not a bug. Your steps do not produce your symptoms for
me.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"DWQues" <[email protected]> wrote in
message
news:[email protected]...
> Alright, try this out step by step.
>
> 1) Open a page in an established site, in one of the
subdirectories. We
> will
> call it /subdir1/
> 2) Highlight some text and go to the "Properties"
toolbar at the bottom
> of
> the screen and click the yellow folder icon next to the
"Link" box.
> 3) Browse to another file in the same directory. Double
click it, and
> watch
> whats placed into the box. Most likely nothing other
than "filename.htm".
> Just as it should be.
>
> 4) Select some other text.
> 5) Click yellow folder and select a file in another
subdirectory, well
> call
> it /subdir2/
> 6) This will place the following into the box
"../subdir2/filename.htm"
> As
> it should.
>
> All is well so far.
>
> 7) Now take that exact same linked-text and click the
folder icon
> 8) Select a file from the current directory (youre still
in subdir1 this
> whole time)
> 9) Watch what appears in the box:
"/subdir1/filename.htm"
>
> I already know some of you are going "Huh?" This is
because you didnt
> follow
> the instructions above. The rest of you see the problem.
When you are in
> SUBDIR1 and you link to another file in SUBDIR1, it
works fine. When you
> have
> a link that is linking to another subdirectory, and
change it to link to a
> file
> in the current subdirectory, it adds the name of the
subdirectory to the
> HREF.
>
> In other words, the exact same link shows up two
different ways:
>
> filename.htm
> /subdir1/filename.htm
>
> Depending on whether its a new link being created, or if
its an existing
> link
> which was linking outside the directory.
>
> This is difficult to describe but unless someone can
explain it to me, im
> calling it another Bug.
> -
Can dreamweaver display PHP class/object just like other IDE does?
thanks~
You'll have to ask a more complete question than that. What
other IDE?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"susan" <[email protected]> wrote in message
news:gen9bl$jhg$[email protected]..
> thanks~ -
Dreamweaver CSS displayed overlaps
I am using Dreamweaver 8 and when I was loading a page in
Dreamweaver and as usual typing ahead something briefly flashed and
disappeared. I assume it was some dialogue asking some question. I
never saw what it was but the end result was when Dreamweaver
loaded the page it was overlapping areas in the Dreamweaver
display. I've posted these before and after shots to show what
happened at DoylePark.com/dwerror.
I can't figure out what happened nor make sense of it because
if I load the page to the website it displays just fine but not in
Dreamweaver. Any suggestions on what happened? (I suspect
Dreamweaver was asking some display question and deleted or changed
something.) It has also affect every page on that web site (within
Dreamweaver) though not in other websites that use essentially the
same CSS style sheet - those still display ok so I assume the
problem is site specific.
Any suggestions would be very much appreciated.If you are using an external stylesheet, it's probably a bad path to the CSS file.
See this link:
http://alt-web.com/DEMOS/DW-Link-Stylesheet.shtml
If that doesn't help, upload page to your web server and post a URL.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com -
Hi,
We perform the e-signing on any PDF using our custom e-signature plug-in. Once that's done, when we try re-opening the PDF in Acrobat version 8.0.0.0, we get the following error:-
"An error exists on this page. Acrobat may not display the page correctly. Please contact the person who created the PDF document to correct the problem"
Please note that this error occurs intermittently and is NOT observed in Acrobat 7 or 9. Also, when a plain PDF is opened (i.e. a PDF without any signature on it) then there is NO error.
Could you let me know what could be the issue here? I read it in Acrobat 8.1.3 release notes that such an error was a known bug in version 8.0.0.0 (http://kb2.adobe.com/cps/407/kb407016.html), but I am not sure of its cause.
Let me know your comments/suggestions.
Thanks!I am getting the same error even in Acrobat version 8.1.3.
Additionally, I noticed that if we click on menu ‘Advanced->Sign&Certify->Preview Document’, then we get a notification as “This document is not PDF/SigQ compliant and may display inconsistently”. On clicking ‘View report’ on that notification, the below dialog pops up. It has errors listed as:-
Code 4000 : Unrecognized PDF content. The document contains PDF content or custom content not supported by the current version of Acrobat.
Code 4002: PDF content contains erros.
However, if we sign the PDF using default adobe signature functionality and reopen that PDF, the error does NOT come and the notification also says ‘This document is PDF/SigQ compliant’.
Can anybody please suggest what could be missing in the custom sign that we apply? Is it because of any of the missing fonts or any other resources?
Awaiting reply!
Regards. -
Our Web Pages Do Not Render Correctly in Dreamweaver
Afternoon All
We've been using Dreamweaver on our company website for
several years now. We've recently redesigned the site, and
Dreamweaver doesn't render our pages properly. We have a page
background image, and a center designed site with a background
image, but Dreamweaver displays the background image, so we can't
see our text. Would anyone know the reason why?
Here's an example URL, the page validates so this can't be
the problem
http://www.ja.net/temp/validation.html
I've also taken a screenshot and uploaded it so that you can
see what we see in Dreamweaver
http://www.ja.net/temp/screenshot.html
Thanks for any help here> Here's an example URL, the page validates so this can't
be the problem
>
>
http://www.ja.net/temp/validation.html
>
> I've also taken a screenshot and uploaded it so that you
can see what we
> see
> in Dreamweaver
>
>
http://www.ja.net/temp/screenshot.html
Are those the same pages? The first one is a page formatted
by CSS. The file
you are opening appears to be formatted with Tables.
Otherwise, it's likely an issue of DW just not handling the
CSS properly.
Nothing new.
-Darrel -
hello
i have built this site, www.emsworthcricketclub.com
for internet explorer 8, and below, there is a short flash film.
can anyone help me get rid of the horrible borders at the top?
thanks
malcolmI believe it has to do with the js call to the swf not
updating although I don’t understand why there is a change to
be updated when the triggering event is a null change to the
template. Active content to run in files on my computer was not
enabled, but enabling it does not correct the problem. The problem
is exhibited in IE, Firefox, and Netscape. I have not tested
others.
I have tried using both site relative & document relative
paths, both methods exhibit the same problem, an invisible swf in
the preview.
I have found a work around to bring back the swf display in
preview. Within Dreamweaver Local Files, move the template files
from the Template directory to the root directory, and then move it
back to the template directory. The links are updated with each
move and I find it’s best to not have any files or pages open
in the Dreamweaver display.
Yesterday I reported the issue was relative to preview only,
but I retract that today. Yesterday I built a sample site to
exhibit the problem but the problem only occurs in preview and not
on the sample site, www.kenbits.com. The site I’m working on
today exhibits the problem both in preview and on the site. Here
are two sample pages,
home.comcast.net/~woods_of_pardee/indexok.htm, &
home.comcast.net/~woods_of_pardee/indexbroken.htm.
Thank you for your continued support and research on my
problem. -
Dreamweaver error with windows
Recently I bought Adobe WebPremium CS3 which includes many
components such as Photoshop, Dreamweaver and Contribute. I can
open and use all of the components except for Dreamweaver. Shortly
after the start page of dreamweaver displays, I get a message
"Adobe DW CS3 has encountered a problem and needs to close". It
allows me to send an Error Report to Microsoft which I have done
but have not gotten any resolution. When I close the error message,
DW also closes. Can anyone provide assistance how to get rid of
this error? I have also contacted the vendor that I bought the
software from. ThanksWhat OS are you running? Sending DW error messages to
Microsoft isn't going
to do much for you....
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"dreamweaver error" <[email protected]>
wrote in message
news:fe3kmi$80v$[email protected]..
>
> Recently I bought Adobe WebPremium CS3 which includes
many components such
> as
> Photoshop, Dreamweaver and Contribute. I can open and
use all of the
> components except for Dreamweaver. Shortly after the
start page of
> dreamweaver
> displays, I get a message "Adobe DW CS3 has encountered
a problem and
> needs to
> close". It allows me to send an Error Report to
Microsoft which I have
> done
> but have not gotten any resolution. When I close the
error message, DW
> also
> closes. Can anyone provide assistance how to get rid of
this error? I
> have
> also contacted the vendor that I bought the software
from. Thanks
>
Maybe you are looking for
-
Hi All, I am working with normal tables with one column as editable using inputfield in the context binding for that field..When i update one field of that column depending on the lead selection all the records of the table corresponding to fie
-
Hi Guys I'm not sure if I should post this here or on the Cloud installation forum. I have CS6 Master Collection and Pr CS6 has been running fine. I'm currently running the Pr Cloud trial. On my main PC, I've downloaded P rCC and edited a small proje
-
Replace new line from xml string
hi, I am getting an input string as given below <div class="titleBar"> <h1>sssPRIVACY POLICY AND YOUR CALIFORNIA PRIVACY RIGHTS</h1> </div> <div class="txtPod"> And I want to replace all the blank lin
-
Lost all links to my playlists
While transferring songs from iTunes to a new, second iPod, all my playlists in iTunes were voided (or something); that is, all the songs are in my "Music" folder, but the playlists no longer have any songs attached. What did I do? What can I do to r
-
Reagrding write from variable to other...
Hello, I want to know following difference. In case a), the date from variable v_fromdat exactly get copied into a field of internal table chg_roles-from_dat but in case of b) the v_fromdat gets copied with different format. a) chg_roles-from_dat = v