Dreamweaver fail to update, problem while installing CC (2014) ?  Code 15 ?

Hello,
While attempting to update Dreamweaver CC(201) it failed to complete the update.  The dialog box suggest to restart the computer, witch I did, but still not updating. Any cue ?
On a MacbookPro, everything from Creative Cloud is fine except two upgrade eg. Dreamweaver CC(2014) and EdgeAnimate CC(2014).
Thank you,

Maybe this will help you.
Exit code 15 installing | Mac OS X | CCM, CS6
Nancy O.

Similar Messages

  • Problem while installing CS6, Please Help

    Hello everyone, I almost search every help available around the internet for my problem and can't figure that out. Hope you guys might had better knowledge about that. I am facing a problem while installing Photoshop CS6 version and I already deleted my previous version and I am receiving the pop of "LOW COMPATIBILITY". Please tell me what might be the problems and the way to get out of this situation so that I can continue doing work for my deals site dealaboo.

    Hi,
    Please share your system configuration on which you are trying to install Ps CS6.
    Regards,
    Ashutosh
    Ps Installer QE

  • Root.sh failed on second node while installing CRS 10g on centos 5.5

    root.sh failed on second node while installing CRS 10g
    Hi all,
    I am able to install Oracle 10g RAC clusterware on first node of the cluster. However, when I run the root.sh script as root
    user on second node of the cluster, it fails with following error message:
    NO KEYS WERE WRITTEN. Supply -force parameter to override.
    -force is destructive and will destroy any previous cluster
    configuration.
    Oracle Cluster Registry for cluster has already been initialized
    Startup will be queued to init within 90 seconds.
    Adding daemons to inittab
    Expecting the CRS daemons to be up within 600 seconds.
    Failure at final check of Oracle CRS stack.
    10
    and run cluvfy stage -post hwos -n all -verbose,it show message:
    ERROR:
    Could not find a suitable set of interfaces for VIPs.
    Result: Node connectivity check failed.
    Checking shared storage accessibility...
    Disk Sharing Nodes (2 in count)
    /dev/sda db2 db1
    and run cluvfy stage -pre crsinst -n all -verbose,it show message:
    ERROR:
    Could not find a suitable set of interfaces for VIPs.
    Result: Node connectivity check failed.
    Checking system requirements for 'crs'...
    No checks registered for this product.
    and run cluvfy stage -post crsinst -n all -verbose,it show message:
    Result: Node reachability check passed from node "DB2".
    Result: User equivalence check passed for user "oracle".
    Node Name CRS daemon CSS daemon EVM daemon
    db2 no no no
    db1 yes yes yes
    Check: Health of CRS
    Node Name CRS OK?
    db1 unknown
    Result: CRS health check failed.
    check crsd.log and show message:
    clsc_connect: (0x143ca610) no listener at (ADDRESS=(PROTOCOL=ipc)(KEY=OCSSD_LL_db2_crs))
    clsssInitNative: connect failed, rc 9
    Any help would be greatly appreciated.
    Edited by: 868121 on 2011-6-24 上午12:31

    Hello, it took a little searching, but I found this in a note in the GRID installation guide for Linux/UNIX:
    Public IP addresses and virtual IP addresses must be in the same subnet.
    In your case, you are using two different subnets for the VIPs.

  • Problem while installing solaris 10 on HP proliant DL 380 G5.

    Hi,
    facing problem while installing solaris 10 05/09 on HP proliant DL 380G5. The array controller is E200.
    i have installed the raid controller driver CPQary3-2.1.0-solaris10-i386, it is going ahead but not detecting the whole hard disk space. My hard disk space is SAS 146GB. There are two 146GB hard disk present. It is showing only 978 MB & only one hard disk. So please help me out. my mail ID is [email protected]

    I have a similar issue trying to load Solaris 10u4 on an IBM x236.
    I had to put in a recognized SCSI card, attach an external array to the card, and install Solaris 10u4 on the array. Then I had to install the correct driver from OpenSolaris (an Adaptec one for IBM ServeRAID), and do a live upgrade onto the now-visible internal disks. Then I removed the array and cleaned up the traces from the live upgrade.
    You may have to do something similar.
    And last month the boot drive got corrupted when power was interrupted. "Oops. Wrong plugs..." This time the external array will stay connected.

  • Re: problem while installing WEB-enyterprise

    Ciao Rajeev
    It looks like you don't have the http directory under your active
    environment.
    Did you copy the http structure from '$FORTE_ROOT/appdist/webenv' to
    '$FORTE_ROOT/appdist/WhateverYourEnvironment' ?
    peace
    Claudio
    -----Original Message-----
    From: Rajiv Srivastava <[email protected]>
    To: [email protected] <[email protected]>
    Date: Tuesday, January 19, 1999 8:48 PM
    Subject: problem while installing WEB-enyterprise
    while running escript to install HTTP library on my machine(WINNT server)
    i am getting a error -
    system Error : There are no distributions available for the application
    HTTP
    can anybody help.
    rajeev
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
    To unsubscribe, email '[email protected]' with
    'unsubscribe forte-users' as the body of the message.
    Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

    Hi Starmgmjo,
    Thanks for posting you issue. Kindly browse the below mentioned URLs to install SharePoint 2013 Step by Step
    http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server
    http://sharepoint-community.net/profiles/blogs/configured-domain-services-controller-and-create-users-and-groups
    http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-1
    http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-2
    http://sharepoint-community.net/profiles/blogs/step-by-step-installation-of-sharepoint-2013-on-windows-server-3
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing :  "mac os x snow leopard cannot be installed on this computer"  And My Mac Configuration details:  Model Name: Mac Mini Model Identifier: Macmini2,1

    Getting problem while installing Snow Leopard (10.6.3) on my Mac Mini. The following issue is showing : 
    "mac os x snow leopard cannot be installed on this computer" 
    And My Mac Configuration details:  Model Name: Mac Mini Model Identifier: Macmini2,1
    Intel Core 2 Duo
    1.83Ghz
    l2Cache: 2mb
    Memory : 2GB
    Bus Speed: 667MHz
    Please help me......
    Thanks

    Actually i have Mac OS X 10.5.4 DVD, I need to upgrade it to Snow Loepard(OS X 10.6)...
    Please suggest me what to do???
    Thanks

  • Have a problem while installing Asmlib packages

    hi all
    I have some problem while installing ASMlib packages.
    my OS=Redhat linux 5.3
    kenel version using this command uname -r=2.6.18-128.el5
    I have downloaded packages and successfully installed following 4
    oracleasm-support-2.1.7-1.el5.i386.rpm
    oracleasmlib-2.0.4-1.el5.i386.rpm
    oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
    oracleasm-2.6.18-128.el5-debuginfo-2.0.5-1.el5.i686.rpm
    but while installing following got error
    rpm -ivh oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686.rpm
    kernel-debug = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5debug-2.0.5-1.el5.i686
    rpm -ivh oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686.rpm
    kernel-PAE = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5PAE-2.0.5-1.el5.i686
    rpm -ivh oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686.rpm
    kernel-xen = 2.6.18-128.el5 is needed by oracleasm-2.6.18-128.el5xen-2.0.5-1.el5.i686
    thanx in advance

    I think you just need below rpms to configure asmlib:
    oracleasm-support-2.1.7-1.el5.i386.rpm
    oracleasmlib-2.0.4-1.el5.i386.rpm
    oracleasm-2.6.18-128.el5-2.0.5-1.el5.i686.rpm
    Read this thread:
    Error install ASMLib on RedHat linux

  • A problem while installing webdynpro

    Hi all:
          there is a problem while installing webdynpro:
    The SAP NetWeaver Developer Studio 7.0.17 Setup has not successfully installed all selected components on your computer, either because a component could not be installed or the process has been aborted.
    Click Finish to exit the wizard. For detailed error descriptions, please open file://D:\nwds\NWDS\NWDS\J2EE-R~1\IDE\setup\saplogvw.exe .
    The following program files could not be registered:
         c:\windows\system32\librfc32.dll
    The installed applications may not function correctly until all program files are successfully installed.
    Could you please tell me how to solve it ?

    Hi
    Please have a look on these similar thread
    1.[Problem in installation SAP Netweaver 2004s |Problem in installation SAP Netweaver 2004s;
    2.[Installation error during installing SAP NetWeaver developer studio|Installation error during installing SAP NetWeaver developer studio 7.0.11;
    Best Regards
    Satish Kumar

  • Problem while Installing adobe pro X

    we have purchased adobe CS6 full version at biotech park, lucknow. and facing some problem while installing adobe pro X component out of all the given component. kindly help me on this..

    What system? What is the exact error? Provide more info and the install error summary.
    Mylenium

  • Problem while installing SAP netweaver developer workplace

    hi,
    I hav a problem while installing SAP netweaver developer workplace .An error has occured while processing service ´developer workplace installation´.This error occured in phase 14 of 25 ie while unpacking SCS Client.error is as follows:-
    [Cannot connect to host uklonki1 Connection refused: connect, -813.]
    the database is online and the x-server is also started.hope anyone can help me in this problem.
    with regards,
    Jaisamma

    Hi Michael,
    I have tried that, but the result remains the same.
    Manish

  • I am experiencing a problem while installing Adobe Flash player 10

    I am experiencing a problem while installing Adobe Flash player 10

    iam e
    xperiencing aproblem while installing adobe flash player10

  • HT4718 My macbook air is stuck at the "installing software updated" screen while installing update for the osX. What should I do?

    My macbook air is stuck at the "installing software updated" screen while installing update for the osX. What should I do?

    Welcome to Apple Support Communities
    If your Mac has been installing software updates for a long time, Software Update is probably frozen. Hold the Power button until your MacBook Air turns off, and turn it on again. OS X should start up.

  • Pages is taking annoyingly long to download and install. Any of you faced similar problems while installing it?

    ages is taking annoyingly long to download and install. Any of you faced similar problems while installing it?

    Who knows what "ages" means to you, or what speed Internet connection you have, or what else is happening on your computer or network.
    Pages/iWork are not small so it can take a while. Sometimes heavy demand at the Apple end can slow their server as well.
    Peter

  • Problem while installing NWSneakPreviewSP11

    Hi All,
           I am facing a problem while installing NWSneakPreviewSP11.In installation 29 phases available.
    It complete 17 phases successfully but get stuck at 18 phase.
    The 18 phase is "Load java DataBase Content" and At status bar it's showing Info:"EP_LOCK_APPLS loaded" message.I have seen view Log also this is not showing any error Message.
    What could be the possible reason to get stuck installation ....?
    Plz tell me how can i resolve this problem.
    Arun Sharma

    Some of the reasons could be:
    1.  You do not have sufficient DB Space
    2.  If it is SP11, you did not set your system Timezone to "Amsterdam, Berlin..." which is +1 GMT
    3.  You might be using JDK other than 1.4.2_08 (this problem was reported when 1.4.2_10 was used)
    HTH
    Venkat

  • I am facing problem while installing iTunes

    I am facing problem while installing iTunes with this error
    "There is problem with you installer package. A program required for this install to complete could not be run."

    Hi Owen,
    I have tried .net Package & Deployment as well as InstallShield 2008. finally i have tried B1DE also. B1DE gives us template only in vb.net but not in C#.net and i want this in c#.net.
    I was trying to understand the code that it creates. I won't be able get the code also.
    I would like to go from other way apart from B1DE.
    Need Urgent Help...

Maybe you are looking for

  • Who can solve iSync problem with Nokia N95? (I use the Nokia plug already)

    Hello Since I bought my new cool Mac:, I sync my N95 with iSync and the Nokia N95 plug-in. Thinking at first that is works flawlessly (as other members here seem to think as well) I later found out, that if I make changes to any calendar or "to do" d

  • Recording 2 inputs at the same time in LE8

    I am using Logic Express 8 on snow leopard and a digidesign Mbox pro 2. I am trying to record my cello through two different inputs on the box, one of them a direct line from an FX pedal im running my cello pickup into, the other an audiotechnica AT2

  • Buffer Overflow -200141

    Hello, I modified the very simple example "Cont-Ext-Buff-Cnt" to use 20MHz source clock and connected the signal of my encoder to gate. I can read fine with slow RPM, 1000 or lower. But I do get Overflow problem (-200141) for RPM > 1000. I am using 1

  • Partial Invoice from Purchase Order

    Hi Experts I did a Purchase order for 10,000 and invoiced for 5,000 but when I try to do the incoice for the balance amount the sytem does not have any open purchase orders. My question is if we do invoice for partial amount can we have the purchase

  • Getting image properties

    anyone know of any jsp code that i can use to get an image's width and height? (the image is stored externally to the jsp and is referenced with a url)