Dreamweaver: how to view file without checking it out?

I have started using the Check-In/Check-Out feature of
Dreamweaver 2004. Sometimes I want to view a .cfm file without
checking it out. I thought the "Get" command might let me do this,
but the file contents don't display. So how do I view the contents
of a checked-in file without checking it out?
Thanks.

I always use file/open, but then again, I have never checked
out a file in my life.

Similar Messages

View source without checking out?

Is there any way to view the source of a page on my site,
without
checking it out? Quite often I just want to check and/or copy
a section
of code to another file, and I'd rather not have to check the
file out
and then check it back in again each time.
Thanks in advance
Kevin

Browse to it, and use View | Source in the browser?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Kevin Blount" <[email protected]> wrote in
message
news:ed47k5$qn9$[email protected]..
> Is there any way to view the source of a page on my
site, without checking
> it out? Quite often I just want to check and/or copy a
section of code to
> another file, and I'd rather not have to check the file
out and then check
> it back in again each time.
>
> Thanks in advance
>
> Kevin

How to Upgrade RPM without checking dependicies.

Hi
I have some RPM installed on RHEL4. for installing i need to upgrade some RPMs. I am using the command RPM -Uvh <RPM name> to upgrade RPMs. Some time i get error that
[root@R11 RPM]# rpm -Uvhf gcc-3.4.6-3.i386.rpm
warning: gcc-3.4.6-3.i386.rpm: V3 DSA signature: NOKEY, key ID 0c98ff9d
error: Failed dependencies:
cpp = 3.4.6-3 is needed by gcc-3.4.6-3.i386
gcc = 3.4.3-9.EL4 is needed by (installed) gcc-c++-3.4.3-9.EL4.i386
gcc = 3.4.3-9.EL4 is needed by (installed) gcc-g77-3.4.3-9.EL4.i386
gcc = 3.4.3-9.EL4 is needed by (installed) gcc-gnat-3.4.3-9.EL4.i386
gcc = 3.4.3-9.EL4 is needed by (installed) gcc-java-3.4.3-9.EL4.i386
gcc = 3.4.3-9.EL4 is needed by (installed) gcc-objc-3.4.3-9.EL4.i386
[root@R11 RPM]#
Kindly inform me how to upgrade RPMs' without checking the dependencies.
Thanks
Krishna

Package dependencies exist to stop you from jeopardizing proper functions of your system. There is probably a good reason for this, but if you want to go ahead regardless then try the --nodeps parameter. The error is telling you that you need to install cpp-3.4.6-3.i386.rpm.

Dreamweaver cs4 or mx2004 may built .war or .jar files for deployment in a jsp server (Tomcat) ? If no, and use Dreamweaver how do these files ?

Dreamweaver cs4 or mx2004 may built .war or .jar files for deployment in a jsp server (Tomcat) ? If no, and use Dreamweaver how do these files ?

if I use Eclipse IDE for compilation[make *.war & *.jar files from *.java like claimBeans.java], I must use also Eclipse for upload/deploy ? Or for upload ONLY I may use and dreamweaver ? The jsp section of dreamweaver, is for app not require compilation, like from Code from:JSP STANDARD TAG LIBRARY , only ?
Basically whatever I may do with "JavaBeans", "Servlets" etc (*.java files) needed to get compiled, I may also do it with JSP STANDARD TAG LIBRARY etc NOT NEEDED Compilation, so if I do not understand how to compile&deploy *.war & *.jar files , I may use instead the latter way ?

How to view Files inside File manager in N73

I wanted a video of .avi or any other format (For my computer) that N73 Doesnot support..& so i have got it in my inbox via bluetooth inside inbox.
But how to SAVE it without opening it.
Becoz on opening it says UNKNOWN FILE FORMAT.
So any one can tell me how to view it and save inside Phone or directly to computer via USB cable.
Shashank RockZzzzzz...With N73 (23)
v4.0726.2.1.1
27-07-2007
RM132

any help will be appriciated
Shashank RockZzzzzz...With N73 (23)
v4.0726.2.1.1
27-07-2007
RM132

Dreamweaver CS3 Remote View file display

Specs:
Dreamweaver CS3 on Windows XP Pro SP2.
Upgraded from DreamWeaver MX
1680 x 1050 60Hz resolution on vertical display LCD panel
with the monitor turned/displayed verticle so I can view more of
our site tree.
Problem:
When viewing files in split panel display (Remote Site on the
left, Local Files on the right) my Remote Site display will
collapse upward...hiding files from view, but they are actually
still there: I can click Refresh and the tree expands again: After
several seconds or sometimes immediately portions of the
folders/files will collapse/hide again.
It will do this to files I have selected. It will hide files
I have checked out. The worst of it is that sometimes files will
hide or collapse within sub-folders..giving the appearance that
files are stored in incorrect folders.
Thank you for your time

Can you explain the symptoms in more detail? Mixing the use
of DW8 with
DWCS3 would not make remote files appear and disappear.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"shimmerdark" <[email protected]> wrote in
message
news:fs91gm$dea$[email protected]..
> Having the same problem with our company website. It
seems that files
> randomly
> disappear and reappear when they feel like it. Not sure
if it is a FTP
> issue or
> something else. I am the only one in our organization
that is currently
> using
> dream weaver cs3. Everyone else is still use DW8.
>

How to view files uploaded in a directory through jsf

Please tell how to view the files in a directory using adf .Using jdeveloper 10g

Hi,
I assume the user has a directory on the server where his/her files go. In this case, you can use Java in a managed bean to access the folder and create a collection of the entries.
http://www.exampledepot.com/egs/java.io/GetFiles.html
Frank

How to view file in EBS R12

Hi,
I have a report output file report1.pdf coming from windows.
I ftp it to our EBS R12 linux server to the desired location.
How can I view it using the "view request" of the EBS CM?
Thanks a lot

Hi,
What do you mean by how to view the report? If you register the concurrent program, then you should be able to view the output using Acrobat Reader (since the type is PDF).
In addition, you should not upload the output file (.pdf), instead upload the rdf file under $PRODUCT_TOP/reports/<lang> directory.
Regards,
Hussein

Installed iTunes 11.4.0 and cannot find how to view files created by apps or screen displays for moving icons. Where did it go?

I recently installed iTunes 11.4.0 and cannot find how to view the files created by some apps on my iPhone (and iPad). There appears to be no way to view them as there was in the previous version. Also can't view screens and icon positons to manipulate them in iTunes. Any one no how to find them, or if they have been purposely removed from 11.4.0?

First, take a deep breath ... enjoy life.
Upgrade to the latest version 1.4.1. It's a free upgrade. It however will not alleviate your frustrations.
You can move a directory in Lr by clicking and dragging to a new location within the Folders panel. To create a new folder on a new drive ensure that no folders are selected (hint: click All Photographs in the Catalog panel) then click the + icon in the Folders panel. You will be presented with a dialog to choose or create a new folder.
To move selected photos to a new directory first select the images then right click the destination folder. You will be presented with several options including moving to the destination folder or creating a new folder under the destination folder.
You can also move images outside of Lr. Review these links:
http://www.adobeforums.com/webx/.3bc42055
http://livedocs.adobe.com/en_US/Lightroom/1.0/help.html?content=WS46FF9C0B-36EA-4271-B1D0- 07B6B46EE011.html
http://photo.net/bboard/q-and-a-fetch-msg?msg_id=00NqWO
http://luckhurst.wordpress.com/2007/08/21/lightroom-with-an-external-hard-drive/

How to restore files without TIme Machine

Help! Anyone know how to restore files on tiger? I lost my WHOLE library of photos! And I don't have back ups. :'(
I was running short of disk space, so I decided to clean up some unnecessary files on my disk. I once imported all my photos from iPhoto to Aperture. Since I usually use iPhoto, I decided to delete all the photos from Aperture library. But the next time when I opened my iPhoto, I found the photos in iPhoto library were also deleted!!! Now there are only thumbnails of all the photos!
Please! Anyone know how to restore the photos on Tiger? I can't afford to lose all my photos. :'(

Try Subrosasoft's FileSalvage.
If that doesn't work try Prosoft Data Rescue II
If that doesn't work, take it to a professional such as http://www.drivesavers.com/
And in the future always keep backing up your data as my FAQ* explains:
http://www.macmaps.com/backup.html
- * Links to my pages may give me compensation.

How to view file from vss using java Commandline

Hi To ALL,
I wanted to view a file from vss through java code.
By using the folowing code,i could able to get vss file in to local folder.
Runtime.getRuntime().exec
("cmd /c ss Get $/Mywork/Myfile.java -GLC:/New");
But i wanted to view file from vss using java code.
any one please help me..
Thanks in advance.........

As always, Google is your friend.
Follow the bouncing link.
http://www.google.com/search?hl=en&q=VisualSourceSafe+%2B+Java+API
PS.

How to declare procedure without using IN OUT parameter?

Hi:
I want to declare procedure without using IN OUT parameter.
My Script is:
DECLARE
procedure pro_bank_master() As
Declare
kr_bankid integer;
last_bank_id number(10,0);
CURSOR comp_cur IS select bank_id,date_created,created_by,modified_by,name_en from COM_BANK_MASTER ;
comp_rec comp_cur%ROWTYPE;
BEGIN
OPEN comp_cur;
FETCH comp_cur INTO comp_rec;
WHILE comp_cur%FOUND
LOOP
kr_bankid:= comp_rec.bank_id;
insert into crayom_db.C_Bank(ad_client_id, ad_org_id, isactive, created, createdby, updated, updatedby, name, routingno, c_location_id, swiftcode, isownbank, description) values(11,11,'Y',sysdate,100,sysdate,11,comp_rec.name_en,'A',1000009,'A','Y','A');
select crayom_db.C_Bank.c_bank_id into last_bank_id from crayom_db.C_Bank where rownum=1 ORDER BY crayom_db.c_bank.c_bank_id DESC;
insert into crayom_db.CR_IdBackup values(kr_bankid, last_bank_id);
FETCH comp_cur INTO comp_rec;
End LOOP;
close comp_cur;
END;
BEGIN
pro_bank_master();
END;
The Error i am receiving is:
Error starting at line 1 in command:
DECLARE
procedure pro_bank_master() As
Declare
kr_bankid integer;
last_bank_id number(10,0);
CURSOR comp_cur IS select bank_id,date_created,created_by,modified_by,name_en from COM_BANK_MASTER ;
comp_rec comp_cur%ROWTYPE;
BEGIN
OPEN comp_cur;
FETCH comp_cur INTO comp_rec;
WHILE comp_cur%FOUND
LOOP
kr_bankid:= comp_rec.bank_id;
insert into crayom_db.C_Bank(ad_client_id, ad_org_id, isactive, created, createdby, updated, updatedby, name, routingno, c_location_id, swiftcode, isownbank, description) values(11,11,'Y',sysdate,100,sysdate,11,comp_rec.name_en,'A',1000009,'A','Y','A');
select crayom_db.C_Bank.c_bank_id into last_bank_id from crayom_db.C_Bank where rownum=1 ORDER BY crayom_db.c_bank.c_bank_id DESC;
insert into crayom_db.CR_IdBackup values(kr_bankid, last_bank_id);
FETCH comp_cur INTO comp_rec;
End LOOP;
close comp_cur;
END;
BEGIN
pro_bank_master();
END;
Error report:
ORA-06550: line 8, column 27:
PLS-00103: Encountered the symbol ")" when expecting one of the following:
<an identifier> <a double-quoted delimited-identifier>
current
06550. 00000 - "line %s, column %s:\n%s"
*Cause: Usually a PL/SQL compilation error.
*Action:
Can any Body Help Me?
Thank You

DECLARE
procedure pro_bank_master As --also you should remove brackets when you are not using any parameters
----Declare-- *( declare should not be present in procedure declaration )*
kr_bankid integer;
last_bank_id number(10,0);
CURSOR comp_cur IS select bank_id,date_created,created_by,modified_by,name_en from COM_BANK_MASTER ;
comp_rec comp_cur%ROWTYPE;
BEGIN
OPEN comp_cur;
FETCH comp_cur INTO comp_rec;
WHILE comp_cur%FOUND
LOOP
kr_bankid:= comp_rec.bank_id;
insert into crayom_db.C_Bank(ad_client_id, ad_org_id, isactive, created, createdby, updated, updatedby, name, routingno, c_location_id, swiftcode, isownbank, description) values(11,11,'Y',sysdate,100,sysdate,11,comp_rec.name_en,'A',1000009,'A','Y','A');
select crayom_db.C_Bank.c_bank_id into last_bank_id from crayom_db.C_Bank where rownum=1 ORDER BY crayom_db.c_bank.c_bank_id DESC;
insert into crayom_db.CR_IdBackup values(kr_bankid, last_bank_id);
FETCH comp_cur INTO comp_rec;
End LOOP;
close comp_cur;
END;
BEGIN
pro_bank_master();
END;
Edited by: user11183973 on Sep 22, 2009 5:49 PM

TEXT_IO.FOPEN how to pick file without specifying the full directory path

Hi,
I am using Oracle application server 10gR2 on Linux with forms 10g application. I am building the DEV/TEST/UAT environment on same Linux machine with one OAS.
I am using TEXT_IO.FOPEN ('/home/oracle/check.txt','r') to read a server side file and it is working fine.
Now I want to pick this file dynamically i.e. without specifying the full path. I am using TEXT_IO.FOPEN ('check.txt','r') and I copied file in forms_path directory in linux and even in $path directory in linux but none of them are working.
Pls help me sort out this problem.
Thanks in advance

Hi,
I have to read files in my app directory using TEXT_IO how is that possible?? I cannot set workingDirectory as my Oracle home is in a different location and as has been mentioned by others when I run the form on web it cannot seem to find the file in the default forms directory where all the .fmx file
Is there any other file setting that needs to be done??
Please help
Thanks & Regards
Mangesh Deshpande

How to view file on server.

Hello
I am developing a small client server application.Clients post comments about the application and these are stored in a file on the server.Its a standalone app.My question is if a client wants to view the file on server,how can i do that??
Any help/suggestions will be appreciated.
thanks
Sree.

I tried doing that but i get an exception
java.net.SocketException: Software caused connection abort: socket write error .
by google i found that this was due to a bug but has been fixed on JRE 1.5(i'm using JRE 1.6) but i still get this.
here is my code:package com;
import java.io.BufferedReader;
import java.io.BufferedWriter;
import java.io.FileInputStream;
import java.io.FileWriter;
import java.io.IOException;
import java.io.InputStreamReader;
import java.io.OutputStreamWriter;
import java.net.MalformedURLException;
import java.net.ServerSocket;
import java.net.Socket;
public class TestServer_New
     public static void main(String args[])
          ServerSocket server = null;
          boolean listening = true;
          final String filename = "comments";
          try {
               server = new ServerSocket(4321);
          catch (MalformedURLException e1) {
               e1.printStackTrace();
          catch (IOException e) {
               System.out.println("Error on port: 4321 " + ", " + e);
               System.exit(1);
          System.out.println("Server setup and waiting for client connection ...");
          try
               while( listening ) {
                    final Socket client_socket = server.accept();
                    System.out.println("Client connection accepted. Moving to local port ...");
                    new Thread( new Runnable() {
                         public void run() {
                              write_to_comments(client_socket, filename);
                         }}).start();
               server.close();
          catch (IOException e)
               System.out.println("Did not accept connection: " + e);
               System.exit(1);
     static synchronized void write_to_comments(Socket client_socket , String filename) {
          try {
               BufferedReader streamIn = new BufferedReader(new InputStreamReader(client_socket.getInputStream()));
               BufferedReader file_reader = new BufferedReader(new InputStreamReader(new FileInputStream(filename)));
               BufferedWriter server_file_writer = new BufferedWriter(new FileWriter(filename,true));
               BufferedWriter writer = new BufferedWriter(new OutputStreamWriter(client_socket.getOutputStream()));
               String line ;
//               while((line = streamIn.readLine()) != null){
//                    if(!line.equals("view comments")){
//                         server_file_writer.write(line);
//                         server_file_writer.newLine();
//                         System.out.println("write to comments request from client "+line);
//                    else{
                         while ((line = file_reader.readLine()) != null){
                              writer.write(line);
                              writer.newLine();
                              System.out.println("view comments request from client "+line);
               writer.newLine();
               writer.close();
//               send_data_to_client(client_socket,filename);
//               streamIn.close();
//               client_socket.close();
          catch(IOException exception){
               exception.printStackTrace();
               System.out.println("IO Error in streams " + exception);
}here is the client code
     void send_comments_to_server(){
          DataOutputStream output_stream;
          String host = "C001192097";     //server host name
          try {
               Socket client = new Socket(host, 4321);
               output_stream = new DataOutputStream(client.getOutputStream());
               BufferedReader stream_input = new BufferedReader(new InputStreamReader(client.getInputStream()));
               BufferedWriter writer = new BufferedWriter(new FileWriter("commentsfromserver",false));
               XStream xstream = new XStream_Data_Analyser();
               String comment_report = get_title_text_field().getText();
               Comments comment = new Comments();
               User_Data user_data = new User_Data();
               String user_info = "User Name: "+user_data.user_name+" "+"Host Name: "+user_data.host_name+" "+"Domain Name: "+ user_data.domain_name;
               comment.user_info = user_info;
               comment.summary = comment_report;
               comment.comments = get_comments_text_area().getText();
               String report = xstream.toXML(comment);
               String line;
               if (view_comments == true){
                    output_stream.writeBytes("view comments");
                    view_comments = false;
//               else{
//                    output_stream.writeBytes(report+"\n");
               while((line = stream_input.readLine()) != null){
                         writer.write(line);
                         writer.newLine();
                         System.out.println("data received from server "+line);
//               output_stream.close();
//               stream_input.close();
//               client.close();
          }catch (UnknownHostException exception){
               System.err.println(host + ": unknown host.");
          catch (IOException exception){
               System.err.println("I/O error with " + host);
               exception.printStackTrace();
     }and this is the exception msg i get:
java.net.SocketException: Software caused connection abort: socket write error
     at java.net.SocketOutputStream.socketWrite0(Native Method)
     at java.net.SocketOutputStream.socketWrite(Unknown Source)
     at java.net.SocketOutputStream.write(Unknown Source)
     at java.io.DataOutputStream.writeBytes(Unknown Source)
     at data_analyser.Improvements_Dialog.send_comments_to_server(Improvements_Dialog.java:131)
     at data_analyser.Improvements_Dialog$2.actionPerformed(Improvements_Dialog.java:170)
     at javax.swing.AbstractButton.fireActionPerformed(Unknown Source)
     at javax.swing.AbstractButton$Handler.actionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.fireActionPerformed(Unknown Source)
     at javax.swing.DefaultButtonModel.setPressed(Unknown Source)
     at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
thanks for your help
sree
Edited by: sreecs on Sep 17, 2008 5:13 PM

How to view File Pathway of each image in the content screen?

Hi, I'm looking at many, slightly varying, copies of an image on my hard drive, trying to work out exactly which version I need to use. I want to know what the filename pathway is for each image, to help me make my choice.
Can anyone tell me how I can view the filename pathway of each of the images shown in the Content screen, other than by choosing 'Reveal in Bridge'? I'd really like to see all the pathways next to each image, so that I can compare them.
(I'm definitely going to have to be more organised with my file naming, metadata, versioning, etc.)
Thanks for any help,
Cheers, Steven

Good grief, I can't believe I didn't see it. It's not exactly what I want, as I'd prefer to see all the pathways at once, but it's better than what I had... Interestingly, it only appears when I have photos from a search displayed. I guess when I have the contents of a folder displayed, the pathway is shown across the top using folder icons.
Thanks for your help.
Cheers,
Steven

Dreamweaver: how to view file without checking it out?

Similar Messages

Maybe you are looking for