DreamWeaver in Win7: cannpt see the Properties Panel

Can anyone tell solution to this problem?
I've installed Dream to Windows 7, works fine, but I cannot see the Properties Panel
Solution is, to set Font Size in Control Panel to "Default (100%)"

That fixed the problem - thanks!
I did have both of those fonts ON already, but noticed that there were other versions of Tahoma and Verdana (with lower version numbers) that were OFF. I switched OFF the newer versions and switched ON the older versions of Tahoma and Verdana and the properties box was full of text, buttons, etc. just like it was supposed to be.
I've spend hours talking with Adobe, who said it was probably a problem with my display drivers and sent me to Apple. Apple said they were no longer supporting the ATI board in my 2009 MacPro and that I would need a new computer. I told Adobe and they said they would continue working on the issue, which they have - I've received several phone calls and emails from them, but no solutions.
How weird that running the newest versions of Tahoma and Verdana caused the problem and turning them off and using the older, Microsoft Office versions solved it. Must be a lesson here, but I don't know what that would be.
Thanks again!

Similar Messages

I could not see Responsive Scaling on the properties panel ?

I could not see Responsive Scaling on the properties panel ?

Responsive scaling is available only when Stage is selected in Animate 3.0
Select 'Stage' in the 'Elements' panel,you should see Responsive scaling option in the Properties panel

Help with the Properties Panel

I just loaded the program and I have the Properties Panel half cut off vertical and parallel. Is there a way to reset it so I can see all of the panel?

The link Elizabeth has posted is to an item in the Dreamweaver FAQ.
I see that both of you are posting in the forum for the first time. Welcome. Please take a few moments to look at the FAQ. Also read How to get help quickly for some useful advice on how to get the best out of this forum.

Reset both parts of the Properties Panel

How do you reset both parts of the Properties Panel in Dreamweaver CS5?
I can see only the upper part, even if I click on two table cells to merge them together, for example.
Thanks

Thanks for your answer. Unfortunately, the tiny triangle is not visible.

I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen. The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

Can I turn off the Properties Panel in Photoshop CC?

Every
Single
Time
I draw a line or a shape or do almost anything it seems in PSCC, the Properties Panel jumps out. Quite rudely, it blocks the upper right of whatever I am working on. Yes, I can simply close it, but it interrupts my workflow, and it pops out constantly. This definitely did not happen in CS6 or any previous version of PS or even in the first version of PS in Creative Cloud.
I haven't yet come across anywhere that will let me deactivate that automatic pop-out...I was hoping someone else had found it already. I would greatly appreciate some assistance!
Thanks!!

You 'instruct' me; I 'should' ... Imperatives, and yet it's me who has the 'attitude'.
Your point regarding dates on the implementation is noted - apologies to those attempting to find a viable work-around with what they had available to them - but subsequent advice to deal with this by buying an extra monitor makes multiple presumptions.
Thanks once again for your opinion on what I should do, but I came to the Adobe forum for an answer regarding an Adobe issue, by definition precisely the right place. Not to be given commands as to how I should work or spend my money by a complete stranger. There's very little helpful about the latter two points, irrespective of how you choose to define them.
To restate my thanks:
Thank you to Jorge and qerhqrhbwdbs for advice on how to actually deal with the problem.
I've got more pressing things on the agenda than bickering about this, Noel, I presume you have too.

Color picker in the Properties panel used to work

I have an object that I want to fill with a specific color. I click on the Fill property, choose the color picker, and type in the RGB numbers for the color. For example 240, 150, 100 for the RGB values. I get black. If I type those same color values into the new Swatches panel, I get an orange color. Has the color picker in the Properties panel stopped working?

Jay, that is a known bug, reported it months ago and hope it will be fixed
soon. The Color picker (picking colors) is still functional, it is only typing in of Hexadecimal codes that is not possible at this moment.

I can't edit a Line with the Properties panel - Flash CS4

I have created a line on the stage with the Line tool, and then want to edit the Stroke and Style in the Properties panel. However, after creating the line these options are greyed out and not available to me. Even if I then select the Line with the Selection tool, I cannot edit the Stroke or the Style. It seems to me I should be able to do this, what am I missing?

Normally after drawing the line you only need to click once on it to select it, and with it selected you should be able to access its settings in the properties panel.

Where is the Properties Panel in the CS6 Camera Raw box ?

Where is the Properties Panel in the CS6 Camera Raw box (looking for Feather slider in that panel)?

I believe there is a Feather adjustment for both the Adjustment Brush and Effects in the 8.2 version for cs6.
Do you have camera raw 8.2?
Effects
Adjustment Brush

Can't see the middle panel of iTunes store

Hi!
I recently upgraded to iTunes 10.7(21) on my Mac. Now, whenever I go to the iTunes Store, I don't see the middle panel where the recommended apps/music/songs, etc. can be seen.
Below is a screenshot:
Any suggestions to solve this would be appreciated.

Perhaps try the iTunes Store loads partially or returns "Error 306" or "Error 10054" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

How to get rid of the properties panel

I'm not a power Photoshop user. I use it with Lightroom. I have Photoshop CC 2014. Whenever I choose levels it seems that the properties panel displays and goes the full length of my screen. It seems to me that this just started happening. If I can get it stopped then there is a minimized properties icon that displays next to my right hand panels. I don't use the properties panel as such. How can I get rid of it?

You should not even try to get rid of it. If you ever add an adjustment layer or use actions that mayadd them you need the properties palette, 3D object also have.
However you can hide the palette as a tab with other palettes you can also close the palette.

When I boot into Win7 I see the windows boot up logo, the. I see my mouse and the screen goes black! It goes black in the login screen, I type my password and I hear the login sound but when I press F2 the brightness won't change! Please help!!!

When I boot into Win7 I see the windows boot up logo, the. I see my mouse and the screen goes black! It goes black in the login screen, I type my password and I hear the login sound but when I press F2 the brightness won't change! Please help!!!

Hi Emma,
Thank you for using Apple Support Communities.
I understand that your Thunderbolt display is just showing a black screen when you boot your computer. The following article should be of help in troubleshooting your display.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
Cheers,
Jeff D.

Click the add property link in the properties panel ?

hi, iam in the css styles panel in the properties section, but i can't find the add properties link ? please help

Hello,
do you think about this from this forum: Styles panel missing in Dreamweaver cs6 (Was: Dreamweaver CS6)
http://forums.adobe.com/thread/1423845 with Jon's answer (it's really working! ):
If you are using DWCC (check under Help > About Dreamweaver to verify your version) and don't like the CSS Designer, you can get the old CSS style panel back by hitting Control + Alt (Command) + Shift +P
Hans-Günter

Dreamweaver template / having trouble seeing the previews

I am designing a website, using Dreamweaver for the first
time, and I would like to ask your advice.
Do you know how to apply a dreamweaver template to other html
pages. I have having trouble seeing the previews in the local
browser. For examples, when I preview an html page, that has the
template included, I see the page OK. But when I click to go to
another page with the sample template, the new page shows up, but
without the template design included.

Answered mutliple times on the DW forum.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"happydreamweaver" <[email protected]> wrote
in message
news:fin6nr$5q1$[email protected]..
> How can I apply a template to new pages? I have done the
following:
> Apply the template to the pages as follows:1 Select File
> Open.
> 2 Browse to and select index.html.
> 3 Select Modify > Templates > Apply Template to
Page.
> 4 Type the title of the page in the Banner Editable
Region. Type or insert
> text in the Body Editable Region.
> 5 Select File > Save.
>
> Then when I preview the broswer, I see the html page as
I should, put when
> I
> click to a new page, the new new doesn't have the
template.
>
> Also, when I went to apply the template to a new page, a
message said that
> I
> had orphaned stuff. What does that mean and how can I
get the template
> show
> apply without the hassle.
>

In Quicktime 10.3, why can't I hide the playback controls? It is most annoying when giving a presentation to a large group to see the control panel appear. I just want them to see the movie. Thanks!

How to hide playback controls?

The problem is I don't want my audience to EVER see the playback controls, just like I don't want to see a TV station's playback controls onscreen when watching TV. Same in a movie theater. The movie should just appear and play.
And not moving the mouse is not an option when going between a slide program and a movie program, which our presentations often if not always do.
Is there a way to do what I want in my computer using Quicktime?
There are no user preferences for any current version of QT X. If you must use "Full" screen mode, then start player playback before entering the "Full" screen mode and exit the "Full" screen mode before again moving the mouse to avoid seeing the controls when you do manipulate the mouse. Only other option might be to use a non-mirroring workflow strategy.
Does Quicktime Pro have that ability?
Yes and no. The QT 7 media player window normally displays the controls at all times. However, when keyed for "Pro" use, you can go to the "Properties" window and change the "Presentation" movie controller type to the "None Movie Controller" setting. In this setting all playing modes other than "Full" screen mode display the player with title bar above the viewing area but without side frame or controls under the display. If you are using the "Full" screen mode for your presentation, then you can open the "Preferences" window to the "Full Screen" tab and deselect display of the "full-screen controls." In both cases you will have to either use menu options to start/stop playback or double-click the display screen to start playback and single-click the display screen to stop playback manually. (NOTE: In the first instance the property setting is/can be saved to the file itself while in the second the setting is saved as a QT 7 Player preference to the player itself.)

DreamWeaver in Win7: cannpt see the Properties Panel

Similar Messages

Maybe you are looking for