Dreamweaver MX 2004 and Windows Vista

Does anyone know if Dreamweaver MX 2004 will install and run
on the new Windows Vista?

Looks like the only thing I can't do is establish a
connection to a db. I
get a 405 error with both DWX 2004 and DW8 trial.
If I manually setup the string in code it will work, but then
you can't use
server behaviors.
Just an FYI
"Rob" <[email protected]> wrote in message
news:[email protected]...
> That's strange, windows mail made that turn out wacked.
>
> "Rob" <[email protected]> wrote in message
> news:[email protected]...
>> debushman,
>>
>> I have been running Sudio MX 2004 on Windows Vista
Ultimate with no
>> issues yet.
>> I have used DW more than the others and mainly in
code view, but any day
>> now
>> I do expect DW to crap on me like a new born.
>>
>> Will it work for you? Maybe. Should you do it? Your
call there. Don't
>> expect DW
>> to be fully compatible with Vista until the release
of DW9.
>>
>> If DW is your only tool and MX 2004 is your only
version then wish you
>> luck if
>> you are diving head first into Vista. Hold off
unless you have multiple
>> computers
>> with one as a dedicated dev machine.
>>
>> Rob
>>
>> "Bill00" <[email protected]> wrote in
message
>> news:[email protected]...
>>> If 8 isn't supported, I'd really doubt that MX
is going to run well...
>>>
>>> --
>>> Extending Knowledge, Daily
>>>
http://www.communityMX.com/
>>> CommunityMX - Free Resources:
>>>
http://www.communitymx.com/free.cfm
>>>
>>> No registration req'd for free content
>>> "Murray *ACE*"
<[email protected]> wrote in message
>>> news:[email protected]...
>>>> Sounds risky to me.
>>>>
>>>> --
>>>> Murray --- ICQ 71997575
>>>> Adobe Community Expert
>>>> (If you *MUST* email me, don't LAUGH when
you do so!)
>>>> ==================
>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>> ==================
>>>>
>>>>
>>>> "debushman"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>> > Does anyone know if Dreamweaver MX 2004
will install and run on the
>>>> > new
>>>> > Windows Vista?
>>>>
>>>>
>>>
>>>
>>
>

Similar Messages

  • Cannot activate Dreamweaver MX 2004 on Windows 7 64 bit pc?

    Hello.
    Does anybody in here know how to activate Dreamweaver MX 2004 on a Windows 7 64 bit pc?
    I keep getting the message that there is an internet connection problem.
    I have deactivated my firewall etc., but it doesn't help me.
    Anybody got an idea? Adobe Chat does not have the answer for me!
    Regards Anders Fj

    Wow! Thank you. It Works! Clever!
    This is really helpful for those
    of us who are nore professionals. I only use Dreamweaver MX 2004 to
    maintain and repair my own small homepage with photos. And I know how to
    use Dreamweaver MX 2004 and I am not interested in learning new tools -
    not now
    ONE MORE QUESTION THOUGH: Where and how do I update my
    Dreamweaver MX 2004 now that I have installed Dreamweaver MX 2004 on my
    new Win 7 64 bit pc?
    Regards
    Anders Fjeldberg, Denmark
    Ken Binney
    skrev den 2014-05-04 00:01:
    CANNOT ACTIVATE DREAMWEAVER MX 2004 ON
    WINDOWS 7 64 BIT PC?
    created by Ken Binney  in _Dreamweaver
    support forum_ - View the full discussion 
    >

  • In dreamweaver mx 2004 and dreamweaver cs4, how I configure, when download/upload do not ask me to include DEPENDED FILES but act without including ?

    in dreamweaver mx 2004 and dreamweaver cs4, how I configure, when download/upload do not ask me to include DEPENDED FILES but act without including ?

    Open the Preferences panel (Edit menu on Windows, Dreamweaver menu on a Mac), and select the Site category. There are two checkboxes there for dependent files. Make sure both are selected. The Dreamweaver default is NOT to upload/download dependent files. You need to click Yes, if you want the dependent files to be included.

  • Um is there a old version of adobe dreamweaver mx 2004 for windows xp professional? can i get a free

    um is there a old version of adoobe dreamweaver mx 2004 for windows xp professional? i have an old version of adobe photoshop(which is adobe photoshop cs(8.0) and adobe image ready which was activated by my father, which i dont know the activation code for it but any way is there a way to get a serial code for it?(dreamweaver mx 2004)
    Message was edited by: japal3

    Yes.  The Activation codes can be found in a table near the bottom of this link:
    http://helpx.adobe.com/x-productkb/policy-pricing/macromedia-legacy-activation-error.html
    Nancy O.

  • Is Verizon going to acknowlege the problems with FIOS and Windows Vista

    For months now, I have been reading the numerous problems Fios internet customers are having with Fios internet/Actiontech Router and Windows Vista and there has been no acknowledgement by Verizon of this current major issue.
    I have also experienced the exact same issue for months now since I switched to Verizon FIOS internet. Previously I had Comcast HSI using my Windows Vista laptop.  I had their service for over a year and I NEVER has a problem with the Windows Vista globe icon disappearing and loosing internet connection. The Globe always stayed on and never went away and I never lost connection when I had Comcast
    I had Verizon FIOS installed last September with my Windows Vista computer and my wireless internet connection started to drop from day 1 and it has been a daily occurrence for over 5 months now.  It has gotten so bad, I have had to hardwire my laptop to to be able to use the internet uninterrupted.
    This is what daily scenario is:
    When I turn on my laptop(with Windows Vista, I can initially get full internet access(with the globe on and it says "Local and internet). After about 10 minutes or less, the globe switches to "local only" and I can still get  internet access.  After another 5 or so minutes, a large X covers the globe and I lose internet connection entirely. The actiontech router wireless signal is no longer listed as one of the wireless networks.  The only way for me to regain internet access is either to restart my laptop or reboot the actiontech router.
    Numeorus posts here, over by DSL forums(Broadband Reports),Microsoft's website and a few othere websites detail this issue.
    I am extremely shocked and surprised that Verizon has not tried to fix this issue by working with both the makers of the Actiontech Router as well as Microsoft to find out what the problem is and how to fix it.
    I would just like to reiterate I strongly believe this is primarily a FIOS internet issue since I previously had Comcast HSI for over a year with the same Windows Vista laptop and I NEVER had that problem. Also,  I can connect to my neighbors wireless connection(she uses Comcast HSI) and when I do, the globe stay on all the time on my computer and the internet does not lose connection.
    I know that there are a couple of Verizon employees here. Please tell the higher ups who handle FIOS internet that this is a major issue that needs to be resolved as soon as possible.
    P.S: Please don't tell me to go by my own router because then, I will have to deal with the issues of setting it up to work with Fios TV and the related VOD, widgets, remote DVR compatability issues to deal with. I don't think I can deal with the additional headaches. 

    FIOS is short for fiber optics.  fiber optics is different technology than DSL.   
    With that said, if you search the Microsoft databases for vista issues with fiber optics, (CURRENTLY THERE IS ONLY ONE PROVIDER OF FIBER TO THE HOUSE, that being Verizon, so yes you can also search Vista issues with verizon and\or fios) and you will find that Microsoft already acknowledges this issue with their software.  AND they offer you a fix.
    cjacobs001

  • Is there a fix for the incompatibility between itunes and Windows Vista?

    I'm having a problem with itunes and Windows Vista. When I download itunes it disables my dvd drive. I have found a fix for that by deleting some registry items, but when I do that itunes is disabled. Does anyone know of a solution to this problem?

    Hey Don,
    What exactly happens after you install iTunes? Do you see an error message?
    This article describes device filter issues that can be caused by application conflicts:
    http://docs.info.apple.com/article.html?artnum=305422
    Jason

  • Is Magic Mouse compatible with PC and Windows Vista

    Hello to everyone, I'm a new member of this forum, I hope someone will help me, please.
    I'm taking a look at the latest beautiful Apple's product and I felt in love with Magic Mouse, I'd like to have it for ma PC (not a Mac) with OS Vista.
    Is there anyboby who knows if this mouse is compatible with a Pc and Windows Vista OS?
    Actually I don't have bluetooth thecnology on my pc but if Magic Mouse were compatible I'd buy an usb adaptor.
    Thanks to everyone will help e!

    I asked a similar question a few hours back and no answers yet. I think nobody knows since nobody has had the chance to test them. If previous releases are any indication, you'll probably get basic functionality because it is bluetooth, but for the advanced features or setting options you'll have to wait for a Windows driver, which can sometimes take a few months or more.
    My thread: http://discussions.apple.com/thread.jspa?threadID=2205313

  • Ipod nano first generation and windows vista

    I finally got everything to work right with Itunes and Windows Vista except one minor problem.
    On my ipod, the blue "dot" does not show up when a podcast is new, so in a long lists of podcasts, I can't tell which ones I already listened to.
    Is there a way to fix this?
    Thank you, Debra

    I have a new ipod nano and can not download iTunes to Winnows Vista.
    Need all the help that i can get. Thanks,
    Capt g

  • Fieldpoint Hardware Drivers that are compatible with LV 8.5 and Windows Vista

    I trying to develop in LabVIEW for some Fieldpoint hardware. I was going to download the hardware drivers from NI, but only see drivers that are compatible with Windows XP and LV 8.2
    Or, am I just misinterpreting this?
    Also, are there any potential conflicts with me developing on Vista, if my end-user, is uding another OS?
    Daddy-O
    One should welcome adversity as an opportunity to excel.

    Hi Daddy-O,
    Thank you for contacting National Instruments.  This is a little misleading, and unfortunately the driver you are looking for is currently not directly searchable.  In order to use your FieldPoint hardware with LabVIEW 8.5 and Windows Vista, you will need the FieldPoint 6.0 driver.  This can be found within the disk that is distributed with new FieldPoint hardware, and any Device Drivers CD from August 2007 forward.  Unfortunately, a standalone installer is not available for this driver, and if you do not have a hard copy of the Device Drivers, you can download this here.  From this installer, you should be able to select FieldPoint 6.0 and install this software.
    I hope this helps!  Let me know if there is anything else I can clarify.  Have a great day!
    Jason W.
    National Instruments
    Applications Engineer

  • Help building an e-commerce site using DreamWeaver MX 2004 and Oracle 10G

    I'm new to using Oracle 10G. After reviewing several rdms's I've picked Oracle 10G as my rdms. I'm trying to build an ecommerce site using DreamWeaver MX 2004 and Oracle 10G. The website will be selling hardware and software products. I have a choice in DreamWeaver to go for a .asp or .jsp setup. I have several questions, here goes:
    1. Is there any book/tutorial/whitepaper out there that describes building an ecommerce site using Oracle 10G/9I/8I? Just some examples as how to make the datamodel regarding the shopping basket etc.
    2. I prefer DreamWeaver as it let's me make nice looking css style based pages without throttling too much through the code. Are there Oracle tools which allow me to make an advanced nice looking ecommerce site?
    I hope some of you can help me get started. Any effort is appreciated.
    Cheers

    I'm new to using Oracle 10G. After reviewing several rdms's I've picked Oracle 10G as my rdms. I'm trying to build an ecommerce site using DreamWeaver MX 2004 and Oracle 10G. The website will be selling hardware and software products. I have a choice in DreamWeaver to go for a .asp or .jsp setup. I have several questions, here goes:
    1. Is there any book/tutorial/whitepaper out there that describes building an ecommerce site using Oracle 10G/9I/8I? Just some examples as how to make the datamodel regarding the shopping basket etc.
    2. I prefer DreamWeaver as it let's me make nice looking css style based pages without throttling too much through the code. Are there Oracle tools which allow me to make an advanced nice looking ecommerce site?
    I hope some of you can help me get started. Any effort is appreciated.
    Cheers

  • I set up a playlist in itunes and when i tried to sync it to my iphone i get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occured.  Using itunes 10.5.2.11 and Windows Vista 64

    I set up a playlist in itunes and when I try so sync it to my iphone, I get an error message "itunes could not copy "x" to the iphone "x" because a timeout error occurred.  Using itunes 10.5.2.11 and Windows Vista 64.  Any help?  Thanks in advance!

    I have the same question and the only reply I've found on the forum was "change the USB hub", which HASN'T worked. So I am accepting new suggestions. Tks!

  • Share filing between Mac and  Windows Vista

    Hello,
    I am trying to file share my iBook and Vista.
    On my I book under Finder >>>Network>> I see my computer name "Computer-PC" but the icon is grayed out.
    When I click on it it says:
    The Alias "Computer-PC" Could not opened, because the original item cannot be found. Then it gives me 3 choices
    Delete Alias, Fix Alias , OK
    I hit OK it does nothing
    I hit Fix Alias, Then it ask me to choose an item to open. I dont know what to open????
    I do not want to Delete Alias.
    Also I tried to connect Vista and it does see the IBook on the network, but then when I try to connect It asks for the user name and password of my iBook
    I verified this by reading the support docs on the Apple website.
    System Preference >>>Systems >>>Accounts >> verified and changed password.
    Still no luck. Can someone give me some advice? Thanks!!

    There are more than a few threads on the topic across the web; so I guess a search
    would be in order and some sorting of results to enable a wise choice from them.
    There's also the Apple Help built into OS X and some ideas present themselves.
    Firewall changes would probably be necessary, and the Sharing (system preference)
    panel has some access settings for some of this sort of thing.
    (The closest I have been to sharing between a Windows machine and a Mac, is when
    I let a few Windows machines mistakenly given to me to troubleshoot & repair, were
    brought into my space and they temporarily shared a workbench. I found out what
    was wrong with them (outside of the poor quality & shabby OS) -- and out they went!)
    •Networking Mac OS X and Windows Vista - google search
    http://www.google.com/search?hl=en&q=NetworkingMac+OS+X+and+WindowsVista&btnG=Search
    •File Sharing between Mac OS X and Vista - google search
    http://www.google.com/search?hl=en&q=FileSharing+between+Mac+OS+X+and+Vista&btnG=GoogleSearch
    •Networking Windows Vista and Mac OS X - google search
    http://www.google.com/search?hl=en&q=NetworkingWindows+Vista+and+Mac+OSX&btnG=Search
    •File Sharing between Windows Vista and Mac OS X
    http://www.google.com/search?hl=en&q=FileSharing+between+Windows+Vista+and+Mac+OS+X&btnG=GoogleSearch
    edited.

  • Dreamweaver MX 2004 and Dreamweaver 8

    Are Dreamweaver MX 2004 and Dreamweaver 8 one of the same, or
    are they 2 different products?

    DW8 is a later release than DMX2004 (DW7).
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Kemery" <[email protected]> wrote in
    message
    news:e9o3av$99h$[email protected]..
    > Are Dreamweaver MX 2004 and Dreamweaver 8 one of the
    same, or are they 2
    > different products?

  • HotSynch Connection gets lost between TE2 and Windows Vista

    I'm trying to hotsync (by bluetooth) between my Tungsten E2 and Windows Vista. I got them speaking to each other, but the hotsync starts and never gets past the Calendar. The laptop looks like it's still running, but the TE2 hotsynch log says the connection was lost.
    Is there a way to keep them connected long enough to sync?
    The TE2 is running Palm OS Garnet v. 5.4.7 and HotSync v. 5.0P
    The laptop is running Windows Vista 7 64 bit, HotSync Manager 7.0.2 and Palm Desktop 6.2.2.
    Thanks!
    Post relates to: Tungsten E2

    Oh, yeah, one more thing..the hotsync works fine by USB cable on the desktop PC running Windows XP, so I don't think there's any corrupted databases on the TE2 (because if there was, then the USB cable hotsync wouldn't work)

  • I'm using photoshop elements 2.0 and window vista.  when i want to crop i cannot enter any values in

    I'm using photoshop elements 2.0 and window vista.  when i want to crop i cannot enter any values in the width and height boxes.  the cursor won't enter.  same thing with resolution.  what did i do?  what's wrong?

    The first thing you might try is resetting the Crop Tool by right clicking on the crop icon in the tool options bar and choosing Reset Tool.
    If that doesn't work then the next thing is to reset the photoshop elements 2 settings file by holding down
    the Shift+Ctrl+Alt keys just after clicking or double clicking on the pse 2 shortcut.
    Keep holding the keys until a dialog appears ask if you want to delete the photoshop elements settings file
    and click yes in the dialog.

Maybe you are looking for